diff options
Diffstat (limited to 'drivers/net')
29 files changed, 59 insertions, 61 deletions
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 6ea963e3b89a..62ee439d5882 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -123,7 +123,7 @@ static int __init arcnet_init(void) arc_proto_map[count] = arc_proto_default; if (BUGLVL(D_DURING)) - pr_info("struct sizes: %Zd %Zd %Zd %Zd %Zd\n", + pr_info("struct sizes: %zd %zd %zd %zd %zd\n", sizeof(struct arc_hardware), sizeof(struct arc_rfc1201), sizeof(struct arc_rfc1051), diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c index a81731303730..a9ac58c351a0 100644 --- a/drivers/net/ethernet/adi/bfin_mac.c +++ b/drivers/net/ethernet/adi/bfin_mac.c @@ -1206,7 +1206,7 @@ static void bfin_mac_rx(struct bfin_mac_local *lp) /* reserve 2 bytes for RXDWA padding */ skb_reserve(new_skb, NET_IP_ALIGN); /* Invalidate the data cache of skb->data range when it is write back - * cache. It will prevent overwritting the new data from DMA + * cache. It will prevent overwriting the new data from DMA */ blackfin_dcache_invalidate_range((unsigned long)new_skb->head, (unsigned long)new_skb->end); diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index 0ee6e208aa07..50d88d3e03b6 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -817,7 +817,7 @@ static void bcm_enet_adjust_phy_link(struct net_device *dev) rx_pause_en = 1; tx_pause_en = 1; } else if (!priv->pause_auto) { - /* pause setting overrided by user */ + /* pause setting overridden by user */ rx_pause_en = priv->pause_rx; tx_pause_en = priv->pause_tx; } else { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 05356efdbf93..b209b7f6093e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -6957,7 +6957,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars) * hence its link is expected to be down * - SECOND_PHY means that first phy should not be able * to link up by itself (using configuration) - * - DEFAULT should be overriden during initialiazation + * - DEFAULT should be overridden during initialization */ DP(NETIF_MSG_LINK, "Invalid link indication" "mpc=0x%x. DISABLING LINK !!!\n", diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 016d481c6476..30606b11b128 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1622,7 +1622,7 @@ static void macb_init_rx_buffer_size(struct macb *bp, size_t size) } } - netdev_dbg(bp->dev, "mtu [%u] rx_buffer_size [%Zu]\n", + netdev_dbg(bp->dev, "mtu [%u] rx_buffer_size [%zu]\n", bp->dev->mtu, bp->rx_buffer_size); } diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c index acc231293e4d..f6e739da7bb7 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c @@ -1416,7 +1416,7 @@ static unsigned int xdigit2int(unsigned char c) * <pattern data>[/<pattern mask>][@<anchor>] * * Up to 2 filter patterns can be specified. If 2 are supplied the first one - * must be anchored at 0. An omited mask is taken as a mask of 1s, an omitted + * must be anchored at 0. An omitted mask is taken as a mask of 1s, an omitted * anchor is taken as 0. */ static ssize_t mps_trc_write(struct file *file, const char __user *buf, diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index cbbf8648307a..78460c52b7c4 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -847,9 +847,7 @@ static void i40e_free_vf_res(struct i40e_vf *vf) wr32(hw, reg_idx, reg); i40e_flush(hw); } - /* reset some of the state varibles keeping - * track of the resources - */ + /* reset some of the state variables keeping track of the resources */ vf->num_queue_pairs = 0; vf->vf_states = 0; clear_bit(I40E_VF_STAT_INIT, &vf->vf_states); diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index 2788a5409023..68812d783f33 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -294,7 +294,7 @@ s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) u32 i, i2ccmd = 0; u16 phy_data_swapped; - /* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/ + /* Prevent overwriting SFP I2C EEPROM which is at A0 address.*/ if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) { hw_dbg("PHY I2C Address %d is out of range.\n", hw->phy.addr); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 30535e6b68f0..c8ac46049f34 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -1449,7 +1449,7 @@ do { \ * @atr_input: input bitstream to compute the hash on * @input_mask: mask for the input bitstream * - * This function serves two main purposes. First it applys the input_mask + * This function serves two main purposes. First it applies the input_mask * to the atr_input resulting in a cleaned up atr_input data stream. * Secondly it computes the hash and stores it in the bkt_hash field at * the end of the input byte stream. This way it will be available for diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index ee38c18c2d2d..ee1c78abab0b 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -1251,10 +1251,10 @@ struct ksz_port_info { * @tx_size: Transmit data size. Used for TX optimization. * The maximum is defined by MAX_TX_HELD_SIZE. * @perm_addr: Permanent MAC address. - * @override_addr: Overrided MAC address. + * @override_addr: Overridden MAC address. * @address: Additional MAC address entries. * @addr_list_size: Additional MAC address list size. - * @mac_override: Indication of MAC address overrided. + * @mac_override: Indication of MAC address overridden. * @promiscuous: Counter to keep track of promiscuous mode set. * @all_multi: Counter to keep track of all multicast mode set. * @multi_list: Multicast address entries. @@ -4042,7 +4042,7 @@ static int empty_addr(u8 *addr) * @hw: The hardware instance. * * This routine programs the MAC address of the hardware when the address is - * overrided. + * overridden. */ static void hw_set_addr(struct ksz_hw *hw) { @@ -7043,7 +7043,7 @@ static int pcidev_init(struct pci_dev *pdev, const struct pci_device_id *id) if (macaddr[0] != ':') get_mac_addr(hw_priv, macaddr, MAIN_PORT); - /* Read MAC address and initialize override address if not overrided. */ + /* Read MAC address and initialize override address if not overridden. */ hw_read_addr(hw); /* Multiple device interfaces mode requires a second MAC address. */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 99b187bfdd55..718bf58a7da6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -178,7 +178,7 @@ const u32 qlcnic_83xx_reg_tbl[] = { 0x3540, /* Device state, DRV_REG1 */ 0x3544, /* Driver state, DRV_REG2 */ 0x3548, /* Driver scratch, DRV_REG3 */ - 0x354C, /* Device partiton info, DRV_REG4 */ + 0x354C, /* Device partition info, DRV_REG4 */ 0x3524, /* Driver IDC ver, DRV_REG5 */ 0x3550, /* FW_VER_MAJOR */ 0x3554, /* FW_VER_MINOR */ diff --git a/drivers/net/ethernet/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h index 47ced8a898ca..91fb54fd03d9 100644 --- a/drivers/net/ethernet/sfc/mcdi_pcol.h +++ b/drivers/net/ethernet/sfc/mcdi_pcol.h @@ -10832,7 +10832,7 @@ /***********************************/ /* MC_CMD_GET_LICENSED_V3_FEATURE_STATES - * Query the state of an one or more licensed features. (Note that the actual + * Query the state of one or more licensed features. (Note that the actual * state may be invalidated by the MC_CMD_LICENSING_V3 OP_UPDATE_LICENSE * operation or a reboot of the MC.) Used for V3 licensing (Medford) */ diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index 19a458716f1a..1b6f6171d078 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -176,7 +176,7 @@ struct sis900_private { u32 msg_enable; - unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */ + unsigned int cur_rx, dirty_rx; /* producer/consumer pointers for Tx/Rx ring */ unsigned int cur_tx, dirty_tx; /* The saved address of a sent/receive-in-place packet buffer */ diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c index bda0c6413450..89698741682f 100644 --- a/drivers/net/gtp.c +++ b/drivers/net/gtp.c @@ -1330,7 +1330,7 @@ static int __init gtp_init(void) if (err < 0) goto unreg_genl_family; - pr_info("GTP module loaded (pdp ctx size %Zd bytes)\n", + pr_info("GTP module loaded (pdp ctx size %zd bytes)\n", sizeof(struct pdp_ctx)); return 0; diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c index 3e37724d30ae..8aefb282c862 100644 --- a/drivers/net/usb/kalmia.c +++ b/drivers/net/usb/kalmia.c @@ -343,7 +343,7 @@ static const struct driver_info kalmia_info = { static const struct usb_device_id products[] = { /* The unswitched USB ID, to get the module auto loaded: */ { USB_DEVICE(0x04e8, 0x689a) }, - /* The stick swithed into modem (by e.g. usb_modeswitch): */ + /* The stick switched into modem (by e.g. usb_modeswitch): */ { USB_DEVICE(0x04e8, 0x6889), .driver_info = (unsigned long) &kalmia_info, }, { /* EMPTY == end of list */} }; diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 4f4f71b2966b..c5b21138b7eb 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -383,7 +383,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) /* REVISIT: peripheral "alignment" request is ignored ... */ dev_dbg(&intf->dev, - "hard mtu %u (%u from dev), rx buflen %Zu, align %d\n", + "hard mtu %u (%u from dev), rx buflen %zu, align %d\n", dev->hard_mtu, tmp, dev->rx_urb_size, 1 << le32_to_cpu(u.init_c->packet_alignment)); diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index d9440bc022f2..ac69f28d92d2 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -379,7 +379,7 @@ static int sierra_net_parse_lsi(struct usbnet *dev, char *data, int datalen) u32 expected_length; if (datalen < sizeof(struct lsi_umts_single)) { - netdev_err(dev->net, "%s: Data length %d, exp >= %Zu\n", + netdev_err(dev->net, "%s: Data length %d, exp >= %zu\n", __func__, datalen, sizeof(struct lsi_umts_single)); return -1; } diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c index e74664b84925..502c346aa790 100644 --- a/drivers/net/wimax/i2400m/usb-fw.c +++ b/drivers/net/wimax/i2400m/usb-fw.c @@ -237,7 +237,7 @@ void __i2400mu_bm_notif_cb(struct urb *urb) * * @i2400m: device descriptor * @urb: urb to use - * @completion: completion varible to complete when done + * @completion: completion variable to complete when done * * Data is always read to i2400m->bm_ack_buf */ diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 815efe9fd208..5214dd7a3936 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -59,13 +59,13 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = { /* * MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm. * With OFDM for single stream you just add up all antenna inputs, you're - * only interested in what you get after FFT. Signal aligment is also not + * only interested in what you get after FFT. Signal alignment is also not * required for OFDM because any phase difference adds up in the frequency * domain. * * MRC requires extra work for use with CCK. You need to align the antenna * signals from the different antenna before you can add the signals together. - * You need aligment of signals as CCK is in time domain, so addition can cancel + * You need alignment of signals as CCK is in time domain, so addition can cancel * your signal completely if phase is 180 degrees (think of adding sine waves). * You also need to remove noise before the addition and this is where ANI * MRC CCK comes into play. One of the antenna inputs may be stronger but diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 10098b7586f3..944b83cfc519 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -4874,7 +4874,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, kfree(af_params); } else { brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control); - brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len); + brcmf_dbg_hex_dump(true, buf, len, "payload, len=%zu\n", len); } exit: diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c index 356aba9d3d53..f922859acf40 100644 --- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c @@ -1238,7 +1238,7 @@ static int ipw2100_get_hw_features(struct ipw2100_priv *priv) } /* - * Start firmware execution after power on and intialization + * Start firmware execution after power on and initialization * The sequence is: * 1. Release ARC * 2. Wait for f/w initialization completes; @@ -1277,7 +1277,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv) /* Release ARC - clear reset bit */ write_register(priv->net_dev, IPW_REG_RESET_REG, 0); - /* wait for f/w intialization complete */ + /* wait for f/w initialization complete */ IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); i = 5000; do { @@ -5652,7 +5652,7 @@ static void shim__set_security(struct net_device *dev, /* As a temporary work around to enable WPA until we figure out why * wpa_supplicant toggles the security capability of the driver, which - * forces a disassocation with force_update... + * forces a disassociation with force_update... * * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/ if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c index ef9af8a29cad..5ef3c5cc47c5 100644 --- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c @@ -3974,7 +3974,7 @@ static void ipw_send_disassociate(struct ipw_priv *priv, int quiet) return; } - IPW_DEBUG_ASSOC("Disassocation attempt from %pM " + IPW_DEBUG_ASSOC("Disassociation attempt from %pM " "on channel %d.\n", priv->assoc_request.bssid, priv->assoc_request.channel); @@ -5196,7 +5196,7 @@ static void ipw_rx_queue_restock(struct ipw_priv *priv) * Move all used packet from rx_used to rx_free, allocating a new SKB for each. * Also restock the Rx queue via ipw_rx_queue_restock. * - * This is called as a scheduled work item (except for during intialization) + * This is called as a scheduled work item (except for during initialization) */ static void ipw_rx_queue_replenish(void *data) { diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c index a91d170a614b..2781f5728d07 100644 --- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c @@ -4855,39 +4855,39 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context) */ D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); - D_INFO("f/w package hdr runtime inst size = %Zd\n", pieces.inst_size); - D_INFO("f/w package hdr runtime data size = %Zd\n", pieces.data_size); - D_INFO("f/w package hdr init inst size = %Zd\n", pieces.init_size); - D_INFO("f/w package hdr init data size = %Zd\n", pieces.init_data_size); - D_INFO("f/w package hdr boot inst size = %Zd\n", pieces.boot_size); + D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size); + D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size); + D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size); + D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size); + D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size); /* Verify that uCode images will fit in card's SRAM */ if (pieces.inst_size > il->hw_params.max_inst_size) { - IL_ERR("uCode instr len %Zd too large to fit in\n", + IL_ERR("uCode instr len %zd too large to fit in\n", pieces.inst_size); goto try_again; } if (pieces.data_size > il->hw_params.max_data_size) { - IL_ERR("uCode data len %Zd too large to fit in\n", + IL_ERR("uCode data len %zd too large to fit in\n", pieces.data_size); goto try_again; } if (pieces.init_size > il->hw_params.max_inst_size) { - IL_ERR("uCode init instr len %Zd too large to fit in\n", + IL_ERR("uCode init instr len %zd too large to fit in\n", pieces.init_size); goto try_again; } if (pieces.init_data_size > il->hw_params.max_data_size) { - IL_ERR("uCode init data len %Zd too large to fit in\n", + IL_ERR("uCode init data len %zd too large to fit in\n", pieces.init_data_size); goto try_again; } if (pieces.boot_size > il->hw_params.max_bsm_size) { - IL_ERR("uCode boot instr len %Zd too large to fit in\n", + IL_ERR("uCode boot instr len %zd too large to fit in\n", pieces.boot_size); goto try_again; } @@ -4938,7 +4938,7 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context) /* Copy images into buffers for card's bus-master reads ... */ /* Runtime instructions (first block of data in file) */ - D_INFO("Copying (but not loading) uCode instr len %Zd\n", + D_INFO("Copying (but not loading) uCode instr len %zd\n", pieces.inst_size); memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size); @@ -4949,28 +4949,28 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context) * Runtime data * NOTE: Copy into backup buffer will be done in il_up() */ - D_INFO("Copying (but not loading) uCode data len %Zd\n", + D_INFO("Copying (but not loading) uCode data len %zd\n", pieces.data_size); memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size); memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size); /* Initialization instructions */ if (pieces.init_size) { - D_INFO("Copying (but not loading) init instr len %Zd\n", + D_INFO("Copying (but not loading) init instr len %zd\n", pieces.init_size); memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size); } /* Initialization data */ if (pieces.init_data_size) { - D_INFO("Copying (but not loading) init data len %Zd\n", + D_INFO("Copying (but not loading) init data len %zd\n", pieces.init_data_size); memcpy(il->ucode_init_data.v_addr, pieces.init_data, pieces.init_data_size); } /* Bootstrap instructions */ - D_INFO("Copying (but not loading) boot instr len %Zd\n", + D_INFO("Copying (but not loading) boot instr len %zd\n", pieces.boot_size); memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size); diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index 0e0293d42b5d..be466a074c1d 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -1141,21 +1141,21 @@ static int validate_sec_sizes(struct iwl_drv *drv, struct iwl_firmware_pieces *pieces, const struct iwl_cfg *cfg) { - IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %Zd\n", + IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %zd\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST)); - IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %Zd\n", + IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %zd\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA)); - IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %Zd\n", + IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %zd\n", get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST)); - IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %Zd\n", + IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %zd\n", get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)); /* Verify that uCode images will fit in card's SRAM. */ if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) > cfg->max_inst_size) { - IWL_ERR(drv, "uCode instr len %Zd too large to fit in\n", + IWL_ERR(drv, "uCode instr len %zd too large to fit in\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST)); return -1; @@ -1163,7 +1163,7 @@ static int validate_sec_sizes(struct iwl_drv *drv, if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) > cfg->max_data_size) { - IWL_ERR(drv, "uCode data len %Zd too large to fit in\n", + IWL_ERR(drv, "uCode data len %zd too large to fit in\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA)); return -1; @@ -1171,7 +1171,7 @@ static int validate_sec_sizes(struct iwl_drv *drv, if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) > cfg->max_inst_size) { - IWL_ERR(drv, "uCode init instr len %Zd too large to fit in\n", + IWL_ERR(drv, "uCode init instr len %zd too large to fit in\n", get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST)); return -1; @@ -1179,7 +1179,7 @@ static int validate_sec_sizes(struct iwl_drv *drv, if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA) > cfg->max_data_size) { - IWL_ERR(drv, "uCode init data len %Zd too large to fit in\n", + IWL_ERR(drv, "uCode init data len %zd too large to fit in\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA)); return -1; diff --git a/drivers/net/wireless/marvell/mwifiex/wmm.c b/drivers/net/wireless/marvell/mwifiex/wmm.c index 28c2f6fae3e6..e4ff3b973850 100644 --- a/drivers/net/wireless/marvell/mwifiex/wmm.c +++ b/drivers/net/wireless/marvell/mwifiex/wmm.c @@ -673,8 +673,8 @@ void mwifiex_update_ralist_tx_pause(struct mwifiex_private *priv, u8 *mac, spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); } -/* This function update non-tdls peer ralist tx_pause while - * tdls channel swithing +/* This function updates non-tdls peer ralist tx_pause while + * tdls channel switching */ void mwifiex_update_ralist_tx_pause_in_tdls_cs(struct mwifiex_private *priv, u8 *mac, u8 tx_pause) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c index 1922e78ad6bd..89a0a28b8b20 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c @@ -455,7 +455,7 @@ static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen, u8 i = 0; do { - /* 8 - Byte aligment */ + /* 8 - Byte alignment */ len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8); /* Buffer length is not enough */ @@ -504,7 +504,7 @@ static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len) u8 i = 0; do { - /* 8 - Byte aligment */ + /* 8 - Byte alignment */ len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8); /* Buffer length is not enough */ diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c index ef5d394f185b..cc8deecea8cb 100644 --- a/drivers/net/wireless/rsi/rsi_91x_usb.c +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -516,7 +516,7 @@ err: /** * rsi_disconnect() - This function performs the reverse of the probe function, - * it deintialize the driver structure. + * it deinitialize the driver structure. * @pfunction: Pointer to the USB interface structure. * * Return: None. diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 5bdf7a03e3dd..d1aa3eee0e81 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -178,7 +178,7 @@ static struct wlcore_conf wl18xx_conf = { .sg = { .params = { [WL18XX_CONF_SG_PARAM_0] = 0, - /* Configuartion Parameters */ + /* Configuration Parameters */ [WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0, [WL18XX_CONF_SG_ZIGBEE_COEX] = 0, [WL18XX_CONF_SG_TIME_SYNC] = 0, diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index d0b7734030ef..58898b99d3f7 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -544,7 +544,7 @@ static int wl12xx_init_sta_role(struct wl1271 *wl, struct wl12xx_vif *wlvif) return 0; } -/* vif-specific intialization */ +/* vif-specific initialization */ static int wl12xx_init_ap_role(struct wl1271 *wl, struct wl12xx_vif *wlvif) { int ret; |