diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 67 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 8 |
2 files changed, 74 insertions, 1 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index b9923047ce11..522c03bc1dad 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -50,6 +50,51 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); /** + * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82598 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 250ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 250ms through the GCR register + */ + if (!(gcr & IXGBE_GCR_CAP_VER2)) { + gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + pci_read_config_word(adapter->pdev, + IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2); + pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; + pci_write_config_word(adapter->pdev, + IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; + IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); +} + +/** * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count * @hw: pointer to hardware structure * @@ -153,6 +198,26 @@ out: } /** + * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function. + * Then set pcie completion timeout + **/ +s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + + /* set the completion timeout for interface */ + if (ret_val == 0) + ixgbe_set_pcie_completion_timeout(hw); + + return ret_val; +} + +/** * ixgbe_get_link_capabilities_82598 - Determines link capabilities * @hw: pointer to hardware structure * @speed: pointer to link speed @@ -1085,7 +1150,7 @@ out: static struct ixgbe_mac_operations mac_ops_82598 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82598, - .start_hw = &ixgbe_start_hw_generic, + .start_hw = &ixgbe_start_hw_82598, .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, .get_media_type = &ixgbe_get_media_type_82598, .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598, diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index fa87309dc087..be90eb4575f6 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -718,6 +718,12 @@ #define IXGBE_ECC_STATUS_82599 0x110E0 #define IXGBE_BAR_CTRL_82599 0x110F4 +/* PCI Express Control */ +#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000 +#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000 +#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000 +#define IXGBE_GCR_CAP_VER2 0x00040000 + /* Time Sync Registers */ #define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */ #define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */ @@ -1521,6 +1527,7 @@ /* PCI Bus Info */ #define IXGBE_PCI_LINK_STATUS 0xB2 +#define IXGBE_PCI_DEVICE_CONTROL2 0xC8 #define IXGBE_PCI_LINK_WIDTH 0x3F0 #define IXGBE_PCI_LINK_WIDTH_1 0x10 #define IXGBE_PCI_LINK_WIDTH_2 0x20 @@ -1531,6 +1538,7 @@ #define IXGBE_PCI_LINK_SPEED_5000 0x2 #define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E #define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80 +#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005 /* Number of 100 microseconds we wait for PCI Express master disable */ #define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800 |