diff options
Diffstat (limited to 'drivers/nvmem')
| -rw-r--r-- | drivers/nvmem/Kconfig | 42 | ||||
| -rw-r--r-- | drivers/nvmem/Makefile | 8 | ||||
| -rw-r--r-- | drivers/nvmem/core.c | 8 | ||||
| -rw-r--r-- | drivers/nvmem/imx-ocotp.c | 154 | ||||
| -rw-r--r-- | drivers/nvmem/mxs-ocotp.c | 257 | ||||
| -rw-r--r-- | drivers/nvmem/rockchip-efuse.c | 186 | ||||
| -rw-r--r-- | drivers/nvmem/sunxi_sid.c | 11 | ||||
| -rw-r--r-- | drivers/nvmem/vf610-ocotp.c | 302 |
8 files changed, 963 insertions, 5 deletions
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 8db297821f78..bc4ea585b42e 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -14,6 +14,28 @@ menuconfig NVMEM if NVMEM +config NVMEM_IMX_OCOTP + tristate "i.MX6 On-Chip OTP Controller support" + depends on SOC_IMX6 + help + This is a driver for the On-Chip OTP Controller (OCOTP) available on + i.MX6 SoCs, providing access to 4 Kbits of one-time programmable + eFuses. + + This driver can also be built as a module. If so, the module + will be called nvmem-imx-ocotp. + +config NVMEM_MXS_OCOTP + tristate "Freescale MXS On-Chip OTP Memory Support" + depends on ARCH_MXS || COMPILE_TEST + help + If you say Y here, you will get readonly access to the + One Time Programmable memory pages that are stored + on the Freescale i.MX23/i.MX28 processor. + + This driver can also be built as a module. If so, the module + will be called nvmem-mxs-ocotp. + config QCOM_QFPROM tristate "QCOM QFPROM Support" depends on ARCH_QCOM || COMPILE_TEST @@ -25,6 +47,16 @@ config QCOM_QFPROM This driver can also be built as a module. If so, the module will be called nvmem_qfprom. +config ROCKCHIP_EFUSE + tristate "Rockchip eFuse Support" + depends on ARCH_ROCKCHIP || COMPILE_TEST + help + This is a simple drive to dump specified values of Rockchip SoC + from eFuse, such as cpu-leakage. + + This driver can also be built as a module. If so, the module + will be called nvmem_rockchip_efuse. + config NVMEM_SUNXI_SID tristate "Allwinner SoCs SID support" depends on ARCH_SUNXI @@ -36,4 +68,14 @@ config NVMEM_SUNXI_SID This driver can also be built as a module. If so, the module will be called nvmem_sunxi_sid. +config NVMEM_VF610_OCOTP + tristate "VF610 SoC OCOTP support" + depends on SOC_VF610 || COMPILE_TEST + help + This is a driver for the 'OCOTP' peripheral available on Vybrid + devices like VF5xx and VF6xx. + + This driver can also be build as a module. If so, the module will + be called nvmem-vf610-ocotp. + endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 4328b930ad9a..95dde3f8f085 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -6,7 +6,15 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o nvmem_core-y := core.o # Devices +obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o +nvmem-imx-ocotp-y := imx-ocotp.o +obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o +nvmem-mxs-ocotp-y := mxs-ocotp.o obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o nvmem_qfprom-y := qfprom.o +obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o +nvmem_rockchip_efuse-y := rockchip-efuse.o obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o nvmem_sunxi_sid-y := sunxi_sid.o +obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o +nvmem-vf610-ocotp-y := vf610-ocotp.o diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index d3c6676b3c0c..6fd4e5a5ef4a 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -67,7 +67,7 @@ static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj, int rc; /* Stop the user from reading */ - if (pos > nvmem->size) + if (pos >= nvmem->size) return 0; if (pos + count > nvmem->size) @@ -92,7 +92,7 @@ static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj, int rc; /* Stop the user from writing */ - if (pos > nvmem->size) + if (pos >= nvmem->size) return 0; if (pos + count > nvmem->size) @@ -825,7 +825,7 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem, return rc; /* shift bits in-place */ - if (cell->bit_offset || cell->bit_offset) + if (cell->bit_offset || cell->nbits) nvmem_shift_read_buffer_in_place(cell, buf); *len = cell->bytes; @@ -938,7 +938,7 @@ int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len) rc = regmap_raw_write(nvmem->regmap, cell->offset, buf, cell->bytes); /* free the tmp buffer */ - if (cell->bit_offset) + if (cell->bit_offset || cell->nbits) kfree(buf); if (IS_ERR_VALUE(rc)) diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c new file mode 100644 index 000000000000..b7971d410b60 --- /dev/null +++ b/drivers/nvmem/imx-ocotp.c @@ -0,0 +1,154 @@ +/* + * i.MX6 OCOTP fusebox driver + * + * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de> + * + * Based on the barebox ocotp driver, + * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>, + * Orex Computed Radiography + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +struct ocotp_priv { + struct device *dev; + void __iomem *base; + unsigned int nregs; +}; + +static int imx_ocotp_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct ocotp_priv *priv = context; + unsigned int offset = *(u32 *)reg; + unsigned int count; + int i; + u32 index; + + index = offset >> 2; + count = val_size >> 2; + + if (count > (priv->nregs - index)) + count = priv->nregs - index; + + for (i = index; i < (index + count); i++) { + *(u32 *)val = readl(priv->base + 0x400 + i * 0x10); + val += 4; + } + + return (i - index) * 4; +} + +static int imx_ocotp_write(void *context, const void *data, size_t count) +{ + /* Not implemented */ + return 0; +} + +static struct regmap_bus imx_ocotp_bus = { + .read = imx_ocotp_read, + .write = imx_ocotp_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static bool imx_ocotp_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static struct regmap_config imx_ocotp_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .writeable_reg = imx_ocotp_writeable_reg, + .name = "imx-ocotp", +}; + +static struct nvmem_config imx_ocotp_nvmem_config = { + .name = "imx-ocotp", + .read_only = true, + .owner = THIS_MODULE, +}; + +static const struct of_device_id imx_ocotp_dt_ids[] = { + { .compatible = "fsl,imx6q-ocotp", (void *)128 }, + { .compatible = "fsl,imx6sl-ocotp", (void *)32 }, + { .compatible = "fsl,imx6sx-ocotp", (void *)128 }, + { }, +}; +MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids); + +static int imx_ocotp_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + struct device *dev = &pdev->dev; + struct resource *res; + struct regmap *regmap; + struct ocotp_priv *priv; + struct nvmem_device *nvmem; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + of_id = of_match_device(imx_ocotp_dt_ids, dev); + priv->nregs = (unsigned int)of_id->data; + imx_ocotp_regmap_config.max_register = 4 * priv->nregs - 4; + + regmap = devm_regmap_init(dev, &imx_ocotp_bus, priv, + &imx_ocotp_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + imx_ocotp_nvmem_config.dev = dev; + nvmem = nvmem_register(&imx_ocotp_nvmem_config); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int imx_ocotp_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static struct platform_driver imx_ocotp_driver = { + .probe = imx_ocotp_probe, + .remove = imx_ocotp_remove, + .driver = { + .name = "imx_ocotp", + .of_match_table = imx_ocotp_dt_ids, + }, +}; +module_platform_driver(imx_ocotp_driver); + +MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>"); +MODULE_DESCRIPTION("i.MX6 OCOTP fuse box driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c new file mode 100644 index 000000000000..8ba19bba3156 --- /dev/null +++ b/drivers/nvmem/mxs-ocotp.c @@ -0,0 +1,257 @@ +/* + * Freescale MXS On-Chip OTP driver + * + * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com> + * + * Based on the driver from Huang Shijie and Christoph G. Baumann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/stmp_device.h> + +/* OCOTP registers and bits */ + +#define BM_OCOTP_CTRL_RD_BANK_OPEN BIT(12) +#define BM_OCOTP_CTRL_ERROR BIT(9) +#define BM_OCOTP_CTRL_BUSY BIT(8) + +#define OCOTP_TIMEOUT 10000 +#define OCOTP_DATA_OFFSET 0x20 + +struct mxs_ocotp { + struct clk *clk; + void __iomem *base; + struct nvmem_device *nvmem; +}; + +static int mxs_ocotp_wait(struct mxs_ocotp *otp) +{ + int timeout = OCOTP_TIMEOUT; + unsigned int status = 0; + + while (timeout--) { + status = readl(otp->base); + + if (!(status & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR))) + break; + + cpu_relax(); + } + + if (status & BM_OCOTP_CTRL_BUSY) + return -EBUSY; + else if (status & BM_OCOTP_CTRL_ERROR) + return -EIO; + + return 0; +} + +static int mxs_ocotp_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct mxs_ocotp *otp = context; + unsigned int offset = *(u32 *)reg; + u32 *buf = val; + int ret; + + ret = clk_enable(otp->clk); + if (ret) + return ret; + + writel(BM_OCOTP_CTRL_ERROR, otp->base + STMP_OFFSET_REG_CLR); + + ret = mxs_ocotp_wait(otp); + if (ret) + goto disable_clk; + + /* open OCOTP banks for read */ + writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_SET); + + /* approximately wait 33 hclk cycles */ + udelay(1); + + ret = mxs_ocotp_wait(otp); + if (ret) + goto close_banks; + + while (val_size) { + if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) { + /* fill up non-data register */ + *buf = 0; + } else { + *buf = readl(otp->base + offset); + } + + buf++; + val_size--; + offset += reg_size; + } + +close_banks: + /* close banks for power saving */ + writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_CLR); + +disable_clk: + clk_disable(otp->clk); + + return ret; +} + +static int mxs_ocotp_write(void *context, const void *data, size_t count) +{ + /* We don't want to support writing */ + return 0; +} + +static bool mxs_ocotp_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static struct nvmem_config ocotp_config = { + .name = "mxs-ocotp", + .owner = THIS_MODULE, +}; + +static const struct regmap_range imx23_ranges[] = { + regmap_reg_range(OCOTP_DATA_OFFSET, 0x210), +}; + +static const struct regmap_access_table imx23_access = { + .yes_ranges = imx23_ranges, + .n_yes_ranges = ARRAY_SIZE(imx23_ranges), +}; + +static const struct regmap_range imx28_ranges[] = { + regmap_reg_range(OCOTP_DATA_OFFSET, 0x290), +}; + +static const struct regmap_access_table imx28_access = { + .yes_ranges = imx28_ranges, + .n_yes_ranges = ARRAY_SIZE(imx28_ranges), +}; + +static struct regmap_bus mxs_ocotp_bus = { + .read = mxs_ocotp_read, + .write = mxs_ocotp_write, /* make regmap_init() happy */ + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static struct regmap_config mxs_ocotp_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 16, + .writeable_reg = mxs_ocotp_writeable_reg, +}; + +static const struct of_device_id mxs_ocotp_match[] = { + { .compatible = "fsl,imx23-ocotp", .data = &imx23_access }, + { .compatible = "fsl,imx28-ocotp", .data = &imx28_access }, + { /* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, mxs_ocotp_match); + +static int mxs_ocotp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mxs_ocotp *otp; + struct resource *res; + const struct of_device_id *match; + struct regmap *regmap; + const struct regmap_access_table *access; + int ret; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) + return -EINVAL; + + otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL); + if (!otp) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + otp->base = devm_ioremap_resource(dev, res); + if (IS_ERR(otp->base)) + return PTR_ERR(otp->base); + + otp->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(otp->clk)) + return PTR_ERR(otp->clk); + + ret = clk_prepare(otp->clk); + if (ret < 0) { + dev_err(dev, "failed to prepare clk: %d\n", ret); + return ret; + } + + access = match->data; + mxs_ocotp_config.rd_table = access; + mxs_ocotp_config.max_register = access->yes_ranges[0].range_max; + + regmap = devm_regmap_init(dev, &mxs_ocotp_bus, otp, &mxs_ocotp_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + ret = PTR_ERR(regmap); + goto err_clk; + } + + ocotp_config.dev = dev; + otp->nvmem = nvmem_register(&ocotp_config); + if (IS_ERR(otp->nvmem)) { + ret = PTR_ERR(otp->nvmem); + goto err_clk; + } + + platform_set_drvdata(pdev, otp); + + return 0; + +err_clk: + clk_unprepare(otp->clk); + + return ret; +} + +static int mxs_ocotp_remove(struct platform_device *pdev) +{ + struct mxs_ocotp *otp = platform_get_drvdata(pdev); + + clk_unprepare(otp->clk); + + return nvmem_unregister(otp->nvmem); +} + +static struct platform_driver mxs_ocotp_driver = { + .probe = mxs_ocotp_probe, + .remove = mxs_ocotp_remove, + .driver = { + .name = "mxs-ocotp", + .of_match_table = mxs_ocotp_match, + }, +}; + +module_platform_driver(mxs_ocotp_driver); +MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>"); +MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c new file mode 100644 index 000000000000..f55213424222 --- /dev/null +++ b/drivers/nvmem/rockchip-efuse.c @@ -0,0 +1,186 @@ +/* + * Rockchip eFuse Driver + * + * Copyright (c) 2015 Rockchip Electronics Co. Ltd. + * Author: Caesar Wang <wxt@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/platform_device.h> +#include <linux/nvmem-provider.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/clk.h> + +#define EFUSE_A_SHIFT 6 +#define EFUSE_A_MASK 0x3ff +#define EFUSE_PGENB BIT(3) +#define EFUSE_LOAD BIT(2) +#define EFUSE_STROBE BIT(1) +#define EFUSE_CSB BIT(0) + +#define REG_EFUSE_CTRL 0x0000 +#define REG_EFUSE_DOUT 0x0004 + +struct rockchip_efuse_context { + struct device *dev; + void __iomem *base; + struct clk *efuse_clk; +}; + +static int rockchip_efuse_write(void *context, const void *data, size_t count) +{ + /* Nothing TBD, Read-Only */ + return 0; +} + +static int rockchip_efuse_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + unsigned int offset = *(u32 *)reg; + struct rockchip_efuse_context *_context = context; + void __iomem *base = _context->base; + struct clk *clk = _context->efuse_clk; + u8 *buf = val; + int ret; + + ret = clk_prepare_enable(clk); + if (ret < 0) { + dev_err(_context->dev, "failed to prepare/enable efuse clk\n"); + return ret; + } + + writel(EFUSE_LOAD | EFUSE_PGENB, base + REG_EFUSE_CTRL); + udelay(1); + while (val_size) { + writel(readl(base + REG_EFUSE_CTRL) & + (~(EFUSE_A_MASK << EFUSE_A_SHIFT)), + base + REG_EFUSE_CTRL); + writel(readl(base + REG_EFUSE_CTRL) | + ((offset & EFUSE_A_MASK) << EFUSE_A_SHIFT), + base + REG_EFUSE_CTRL); + udelay(1); + writel(readl(base + REG_EFUSE_CTRL) | + EFUSE_STROBE, base + REG_EFUSE_CTRL); + udelay(1); + *buf++ = readb(base + REG_EFUSE_DOUT); + writel(readl(base + REG_EFUSE_CTRL) & + (~EFUSE_STROBE), base + REG_EFUSE_CTRL); + udelay(1); + + val_size -= 1; + offset += 1; + } + + /* Switch to standby mode */ + writel(EFUSE_PGENB | EFUSE_CSB, base + REG_EFUSE_CTRL); + + clk_disable_unprepare(clk); + + return 0; +} + +static struct regmap_bus rockchip_efuse_bus = { + .read = rockchip_efuse_read, + .write = rockchip_efuse_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static struct regmap_config rockchip_efuse_regmap_config = { + .reg_bits = 32, + .reg_stride = 1, + .val_bits = 8, +}; + +static struct nvmem_config econfig = { + .name = "rockchip-efuse", + .owner = THIS_MODULE, + .read_only = true, +}; + +static const struct of_device_id rockchip_efuse_match[] = { + { .compatible = "rockchip,rockchip-efuse",}, + { /* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, rockchip_efuse_match); + +static int rockchip_efuse_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct nvmem_device *nvmem; + struct regmap *regmap; + void __iomem *base; + struct clk *clk; + struct rockchip_efuse_context *context; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + context = devm_kzalloc(dev, sizeof(struct rockchip_efuse_context), + GFP_KERNEL); + if (IS_ERR(context)) + return PTR_ERR(context); + + clk = devm_clk_get(dev, "pclk_efuse"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + context->dev = dev; + context->base = base; + context->efuse_clk = clk; + + rockchip_efuse_regmap_config.max_register = resource_size(res) - 1; + + regmap = devm_regmap_init(dev, &rockchip_efuse_bus, + context, &rockchip_efuse_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + econfig.dev = dev; + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int rockchip_efuse_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static struct platform_driver rockchip_efuse_driver = { + .probe = rockchip_efuse_probe, + .remove = rockchip_efuse_remove, + .driver = { + .name = "rockchip-efuse", + .of_match_table = rockchip_efuse_match, + }, +}; + +module_platform_driver(rockchip_efuse_driver); +MODULE_DESCRIPTION("rockchip_efuse driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c index 14777dd5212d..cfa3b85064dd 100644 --- a/drivers/nvmem/sunxi_sid.c +++ b/drivers/nvmem/sunxi_sid.c @@ -103,7 +103,7 @@ static int sunxi_sid_probe(struct platform_device *pdev) struct nvmem_device *nvmem; struct regmap *regmap; struct sunxi_sid *sid; - int i, size; + int ret, i, size; char *randomness; sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL); @@ -131,6 +131,11 @@ static int sunxi_sid_probe(struct platform_device *pdev) return PTR_ERR(nvmem); randomness = kzalloc(sizeof(u8) * size, GFP_KERNEL); + if (!randomness) { + ret = -EINVAL; + goto err_unreg_nvmem; + } + for (i = 0; i < size; i++) randomness[i] = sunxi_sid_read_byte(sid, i); @@ -140,6 +145,10 @@ static int sunxi_sid_probe(struct platform_device *pdev) platform_set_drvdata(pdev, nvmem); return 0; + +err_unreg_nvmem: + nvmem_unregister(nvmem); + return ret; } static int sunxi_sid_remove(struct platform_device *pdev) diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c new file mode 100644 index 000000000000..8641319efeda --- /dev/null +++ b/drivers/nvmem/vf610-ocotp.c @@ -0,0 +1,302 @@ +/* + * Copyright (C) 2015 Toradex AG. + * + * Author: Sanchayan Maity <sanchayan.maity@toradex.com> + * + * Based on the barebox ocotp driver, + * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il> + * Orex Computed Radiography + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* OCOTP Register Offsets */ +#define OCOTP_CTRL_REG 0x00 +#define OCOTP_CTRL_SET 0x04 +#define OCOTP_CTRL_CLR 0x08 +#define OCOTP_TIMING 0x10 +#define OCOTP_DATA 0x20 +#define OCOTP_READ_CTRL_REG 0x30 +#define OCOTP_READ_FUSE_DATA 0x40 + +/* OCOTP Register bits and masks */ +#define OCOTP_CTRL_WR_UNLOCK 16 +#define OCOTP_CTRL_WR_UNLOCK_KEY 0x3E77 +#define OCOTP_CTRL_WR_UNLOCK_MASK GENMASK(31, 16) +#define OCOTP_CTRL_ADDR 0 +#define OCOTP_CTRL_ADDR_MASK GENMASK(6, 0) +#define OCOTP_CTRL_RELOAD_SHADOWS BIT(10) +#define OCOTP_CTRL_ERR BIT(9) +#define OCOTP_CTRL_BUSY BIT(8) + +#define OCOTP_TIMING_STROBE_READ 16 +#define OCOTP_TIMING_STROBE_READ_MASK GENMASK(21, 16) +#define OCOTP_TIMING_RELAX 12 +#define OCOTP_TIMING_RELAX_MASK GENMASK(15, 12) +#define OCOTP_TIMING_STROBE_PROG 0 +#define OCOTP_TIMING_STROBE_PROG_MASK GENMASK(11, 0) + +#define OCOTP_READ_CTRL_READ_FUSE 0x1 + +#define VF610_OCOTP_TIMEOUT 100000 + +#define BF(value, field) (((value) << field) & field##_MASK) + +#define DEF_RELAX 20 + +static const int base_to_fuse_addr_mappings[][2] = { + {0x400, 0x00}, + {0x410, 0x01}, + {0x420, 0x02}, + {0x450, 0x05}, + {0x4F0, 0x0F}, + {0x600, 0x20}, + {0x610, 0x21}, + {0x620, 0x22}, + {0x630, 0x23}, + {0x640, 0x24}, + {0x650, 0x25}, + {0x660, 0x26}, + {0x670, 0x27}, + {0x6F0, 0x2F}, + {0x880, 0x38}, + {0x890, 0x39}, + {0x8A0, 0x3A}, + {0x8B0, 0x3B}, + {0x8C0, 0x3C}, + {0x8D0, 0x3D}, + {0x8E0, 0x3E}, + {0x8F0, 0x3F}, + {0xC80, 0x78}, + {0xC90, 0x79}, + {0xCA0, 0x7A}, + {0xCB0, 0x7B}, + {0xCC0, 0x7C}, + {0xCD0, 0x7D}, + {0xCE0, 0x7E}, + {0xCF0, 0x7F}, +}; + +struct vf610_ocotp { + void __iomem *base; + struct clk *clk; + struct device *dev; + struct nvmem_device *nvmem; + int timing; +}; + +static int vf610_ocotp_wait_busy(void __iomem *base) +{ + int timeout = VF610_OCOTP_TIMEOUT; + + while ((readl(base) & OCOTP_CTRL_BUSY) && --timeout) + udelay(10); + + if (!timeout) { + writel(OCOTP_CTRL_ERR, base + OCOTP_CTRL_CLR); + return -ETIMEDOUT; + } + + udelay(10); + + return 0; +} + +static int vf610_ocotp_calculate_timing(struct vf610_ocotp *ocotp_dev) +{ + u32 clk_rate; + u32 relax, strobe_read, strobe_prog; + u32 timing; + + clk_rate = clk_get_rate(ocotp_dev->clk); + + /* Refer section OTP read/write timing parameters in TRM */ + relax = clk_rate / (1000000000 / DEF_RELAX) - 1; + strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1; + strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1; + + timing = BF(relax, OCOTP_TIMING_RELAX); + timing |= BF(strobe_read, OCOTP_TIMING_STROBE_READ); + timing |= BF(strobe_prog, OCOTP_TIMING_STROBE_PROG); + + return timing; +} + +static int vf610_get_fuse_address(int base_addr_offset) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(base_to_fuse_addr_mappings); i++) { + if (base_to_fuse_addr_mappings[i][0] == base_addr_offset) + return base_to_fuse_addr_mappings[i][1]; + } + + return -EINVAL; +} + +static int vf610_ocotp_write(void *context, const void *data, size_t count) +{ + return 0; +} + +static int vf610_ocotp_read(void *context, + const void *off, size_t reg_size, + void *val, size_t val_size) +{ + struct vf610_ocotp *ocotp = context; + void __iomem *base = ocotp->base; + unsigned int offset = *(u32 *)off; + u32 reg, *buf = val; + int fuse_addr; + int ret; + + while (val_size > 0) { + fuse_addr = vf610_get_fuse_address(offset); + if (fuse_addr > 0) { + writel(ocotp->timing, base + OCOTP_TIMING); + ret = vf610_ocotp_wait_busy(base + OCOTP_CTRL_REG); + if (ret) + return ret; + + reg = readl(base + OCOTP_CTRL_REG); + reg &= ~OCOTP_CTRL_ADDR_MASK; + reg &= ~OCOTP_CTRL_WR_UNLOCK_MASK; + reg |= BF(fuse_addr, OCOTP_CTRL_ADDR); + writel(reg, base + OCOTP_CTRL_REG); + + writel(OCOTP_READ_CTRL_READ_FUSE, + base + OCOTP_READ_CTRL_REG); + ret = vf610_ocotp_wait_busy(base + OCOTP_CTRL_REG); + if (ret) + return ret; + + if (readl(base) & OCOTP_CTRL_ERR) { + dev_dbg(ocotp->dev, "Error reading from fuse address %x\n", + fuse_addr); + writel(OCOTP_CTRL_ERR, base + OCOTP_CTRL_CLR); + } + + /* + * In case of error, we do not abort and expect to read + * 0xBADABADA as mentioned by the TRM. We just read this + * value and return. + */ + *buf = readl(base + OCOTP_READ_FUSE_DATA); + } else { + *buf = 0; + } + + buf++; + val_size--; + offset += reg_size; + } + + return 0; +} + +static struct regmap_bus vf610_ocotp_bus = { + .read = vf610_ocotp_read, + .write = vf610_ocotp_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static struct regmap_config ocotp_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static struct nvmem_config ocotp_config = { + .name = "ocotp", + .owner = THIS_MODULE, +}; + +static const struct of_device_id ocotp_of_match[] = { + { .compatible = "fsl,vf610-ocotp", }, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, ocotp_of_match); + +static int vf610_ocotp_remove(struct platform_device *pdev) +{ + struct vf610_ocotp *ocotp_dev = platform_get_drvdata(pdev); + + return nvmem_unregister(ocotp_dev->nvmem); +} + +static int vf610_ocotp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct regmap *regmap; + struct vf610_ocotp *ocotp_dev; + + ocotp_dev = devm_kzalloc(&pdev->dev, + sizeof(struct vf610_ocotp), GFP_KERNEL); + if (!ocotp_dev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ocotp_dev->base = devm_ioremap_resource(dev, res); + if (IS_ERR(ocotp_dev->base)) + return PTR_ERR(ocotp_dev->base); + + ocotp_dev->clk = devm_clk_get(dev, NULL); + if (IS_ERR(ocotp_dev->clk)) { + dev_err(dev, "failed getting clock, err = %ld\n", + PTR_ERR(ocotp_dev->clk)); + return PTR_ERR(ocotp_dev->clk); + } + + ocotp_regmap_config.max_register = resource_size(res); + regmap = devm_regmap_init(dev, + &vf610_ocotp_bus, ocotp_dev, &ocotp_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + ocotp_config.dev = dev; + + ocotp_dev->nvmem = nvmem_register(&ocotp_config); + if (IS_ERR(ocotp_dev->nvmem)) + return PTR_ERR(ocotp_dev->nvmem); + + ocotp_dev->dev = dev; + platform_set_drvdata(pdev, ocotp_dev); + + ocotp_dev->timing = vf610_ocotp_calculate_timing(ocotp_dev); + + return 0; +} + +static struct platform_driver vf610_ocotp_driver = { + .probe = vf610_ocotp_probe, + .remove = vf610_ocotp_remove, + .driver = { + .name = "vf610-ocotp", + .of_match_table = ocotp_of_match, + }, +}; +module_platform_driver(vf610_ocotp_driver); +MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>"); +MODULE_DESCRIPTION("Vybrid OCOTP driver"); +MODULE_LICENSE("GPL v2"); |