1 files changed, 171 insertions, 90 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 07bbb9b3b93f..7b70312181d7 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -485,6 +485,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
 		pmcsr |= state;
 		break;
+	case PCI_D3hot:
+	case PCI_D3cold:
 	case PCI_UNKNOWN: /* Boot-up */
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
 		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
@@ -844,6 +846,8 @@ pci_restore_state(struct pci_dev *dev)
 	int i;
 	u32 val;
 
+	if (!dev->state_saved)
+		return 0;
 	/* PCI Express register must be restored first */
 	pci_restore_pcie_state(dev);
 
@@ -1208,7 +1212,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
  * Error code depending on the platform is returned if both the platform and
  * the native mechanism fail to enable the generation of wake-up events
  */
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
+int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
 {
 	int error = 0;
 	bool pme_done = false;
@@ -1287,15 +1291,14 @@ pci_power_t pci_target_state(struct pci_dev *dev)
 		default:
 			target_state = state;
 		}
+	} else if (!dev->pm_cap) {
+		target_state = PCI_D0;
 	} else if (device_may_wakeup(&dev->dev)) {
 		/*
 		 * Find the deepest state from which the device can generate
 		 * wake-up events, make it the target state and enable device
 		 * to generate PME#.
 		 */
-		if (!dev->pm_cap)
-			return PCI_POWER_ERROR;
-
 		if (dev->pme_support) {
 			while (target_state
 			      && !(dev->pme_support & (1 << target_state)))
@@ -1516,11 +1519,20 @@ void pci_enable_ari(struct pci_dev *dev)
  *
  * Perform INTx swizzling for a device behind one level of bridge.  This is
  * required by section 9.1 of the PCI-to-PCI bridge specification for devices
- * behind bridges on add-in cards.
+ * behind bridges on add-in cards.  For devices with ARI enabled, the slot
+ * number is always 0 (see the Implementation Note in section 2.2.8.1 of
+ * the PCI Express Base Specification, Revision 2.1)
  */
 u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
 {
-	return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+	int slot;
+
+	if (pci_ari_enabled(dev->bus))
+		slot = 0;
+	else
+		slot = PCI_SLOT(dev->devfn);
+
+	return (((pin - 1) + slot) % 4) + 1;
 }
 
 int
@@ -1532,7 +1544,7 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
 	if (!pin)
 		return -1;
 
-	while (dev->bus->parent) {
+	while (!pci_is_root_bus(dev->bus)) {
 		pin = pci_swizzle_interrupt_pin(dev, pin);
 		dev = dev->bus->self;
 	}
@@ -1552,7 +1564,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	u8 pin = *pinp;
 
-	while (dev->bus->parent) {
+	while (!pci_is_root_bus(dev->bus)) {
 		pin = pci_swizzle_interrupt_pin(dev, pin);
 		dev = dev->bus->self;
 	}
@@ -2058,111 +2070,177 @@ int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
 EXPORT_SYMBOL(pci_set_dma_seg_boundary);
 #endif
 
-static int __pcie_flr(struct pci_dev *dev, int probe)
+static int pcie_flr(struct pci_dev *dev, int probe)
 {
-	u16 status;
+	int i;
+	int pos;
 	u32 cap;
-	int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	u16 status;
 
-	if (!exppos)
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (!pos)
 		return -ENOTTY;
-	pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap);
+
+	pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
 	if (!(cap & PCI_EXP_DEVCAP_FLR))
 		return -ENOTTY;
 
 	if (probe)
 		return 0;
 
-	pci_block_user_cfg_access(dev);
-
 	/* Wait for Transaction Pending bit clean */
-	pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
-	if (!(status & PCI_EXP_DEVSTA_TRPND))
-		goto transaction_done;
+	for (i = 0; i < 4; i++) {
+		if (i)
+			msleep((1 << (i - 1)) * 100);
 
-	msleep(100);
-	pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
-	if (!(status & PCI_EXP_DEVSTA_TRPND))
-		goto transaction_done;
-
-	dev_info(&dev->dev, "Busy after 100ms while trying to reset; "
-			"sleeping for 1 second\n");
-	ssleep(1);
-	pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
-	if (status & PCI_EXP_DEVSTA_TRPND)
-		dev_info(&dev->dev, "Still busy after 1s; "
-				"proceeding with reset anyway\n");
-
-transaction_done:
-	pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL,
+		pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
+		if (!(status & PCI_EXP_DEVSTA_TRPND))
+			goto clear;
+	}
+
+	dev_err(&dev->dev, "transaction is not cleared; "
+			"proceeding with reset anyway\n");
+
+clear:
+	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
 				PCI_EXP_DEVCTL_BCR_FLR);
-	mdelay(100);
+	msleep(100);
 
-	pci_unblock_user_cfg_access(dev);
 	return 0;
 }
 
-static int __pci_af_flr(struct pci_dev *dev, int probe)
+static int pci_af_flr(struct pci_dev *dev, int probe)
 {
-	int cappos = pci_find_capability(dev, PCI_CAP_ID_AF);
-	u8 status;
+	int i;
+	int pos;
 	u8 cap;
+	u8 status;
 
-	if (!cappos)
+	pos = pci_find_capability(dev, PCI_CAP_ID_AF);
+	if (!pos)
 		return -ENOTTY;
-	pci_read_config_byte(dev, cappos + PCI_AF_CAP, &cap);
+
+	pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
 	if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
 		return -ENOTTY;
 
 	if (probe)
 		return 0;
 
-	pci_block_user_cfg_access(dev);
-
 	/* Wait for Transaction Pending bit clean */
-	pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
-	if (!(status & PCI_AF_STATUS_TP))
-		goto transaction_done;
+	for (i = 0; i < 4; i++) {
+		if (i)
+			msleep((1 << (i - 1)) * 100);
+
+		pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status);
+		if (!(status & PCI_AF_STATUS_TP))
+			goto clear;
+	}
 
+	dev_err(&dev->dev, "transaction is not cleared; "
+			"proceeding with reset anyway\n");
+
+clear:
+	pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
 	msleep(100);
-	pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
-	if (!(status & PCI_AF_STATUS_TP))
-		goto transaction_done;
-
-	dev_info(&dev->dev, "Busy after 100ms while trying to"
-			" reset; sleeping for 1 second\n");
-	ssleep(1);
-	pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
-	if (status & PCI_AF_STATUS_TP)
-		dev_info(&dev->dev, "Still busy after 1s; "
-				"proceeding with reset anyway\n");
-
-transaction_done:
-	pci_write_config_byte(dev, cappos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
-	mdelay(100);
-
-	pci_unblock_user_cfg_access(dev);
+
 	return 0;
 }
 
-static int __pci_reset_function(struct pci_dev *pdev, int probe)
+static int pci_pm_reset(struct pci_dev *dev, int probe)
 {
-	int res;
+	u16 csr;
 
-	res = __pcie_flr(pdev, probe);
-	if (res != -ENOTTY)
-		return res;
+	if (!dev->pm_cap)
+		return -ENOTTY;
+
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
+	if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
+		return -ENOTTY;
+
+	if (probe)
+		return 0;
+
+	if (dev->current_state != PCI_D0)
+		return -EINVAL;
 
-	res = __pci_af_flr(pdev, probe);
-	if (res != -ENOTTY)
-		return res;
+	csr &= ~PCI_PM_CTRL_STATE_MASK;
+	csr |= PCI_D3hot;
+	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+	msleep(pci_pm_d3_delay);
 
-	return res;
+	csr &= ~PCI_PM_CTRL_STATE_MASK;
+	csr |= PCI_D0;
+	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+	msleep(pci_pm_d3_delay);
+
+	return 0;
+}
+
+static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+{
+	u16 ctrl;
+	struct pci_dev *pdev;
+
+	if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
+		return -ENOTTY;
+
+	list_for_each_entry(pdev, &dev->bus->devices, bus_list)
+		if (pdev != dev)
+			return -ENOTTY;
+
+	if (probe)
+		return 0;
+
+	pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
+	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+	msleep(100);
+
+	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+	msleep(100);
+
+	return 0;
+}
+
+static int pci_dev_reset(struct pci_dev *dev, int probe)
+{
+	int rc;
+
+	might_sleep();
+
+	if (!probe) {
+		pci_block_user_cfg_access(dev);
+		/* block PM suspend, driver probe, etc. */
+		down(&dev->dev.sem);
+	}
+
+	rc = pcie_flr(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
+	rc = pci_af_flr(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
+	rc = pci_pm_reset(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
+	rc = pci_parent_bus_reset(dev, probe);
+done:
+	if (!probe) {
+		up(&dev->dev.sem);
+		pci_unblock_user_cfg_access(dev);
+	}
+
+	return rc;
 }
 
 /**
- * pci_execute_reset_function() - Reset a PCI device function
- * @dev: Device function to reset
+ * __pci_reset_function - reset a PCI device function
+ * @dev: PCI device to reset
  *
  * Some devices allow an individual function to be reset without affecting
  * other functions in the same device.  The PCI device must be responsive
@@ -2174,18 +2252,18 @@ static int __pci_reset_function(struct pci_dev *pdev, int probe)
  * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
  * etc.
  *
- * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * Returns 0 if the device function was successfully reset or negative if the
  * device doesn't support resetting a single function.
  */
-int pci_execute_reset_function(struct pci_dev *dev)
+int __pci_reset_function(struct pci_dev *dev)
 {
-	return __pci_reset_function(dev, 0);
+	return pci_dev_reset(dev, 0);
 }
-EXPORT_SYMBOL_GPL(pci_execute_reset_function);
+EXPORT_SYMBOL_GPL(__pci_reset_function);
 
 /**
- * pci_reset_function() - quiesce and reset a PCI device function
- * @dev: Device function to reset
+ * pci_reset_function - quiesce and reset a PCI device function
+ * @dev: PCI device to reset
  *
  * Some devices allow an individual function to be reset without affecting
  * other functions in the same device.  The PCI device must be responsive
@@ -2193,32 +2271,33 @@ EXPORT_SYMBOL_GPL(pci_execute_reset_function);
  *
  * This function does not just reset the PCI portion of a device, but
  * clears all the state associated with the device.  This function differs
- * from pci_execute_reset_function in that it saves and restores device state
+ * from __pci_reset_function in that it saves and restores device state
  * over the reset.
  *
- * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * Returns 0 if the device function was successfully reset or negative if the
  * device doesn't support resetting a single function.
  */
 int pci_reset_function(struct pci_dev *dev)
 {
-	int r = __pci_reset_function(dev, 1);
+	int rc;
 
-	if (r < 0)
-		return r;
+	rc = pci_dev_reset(dev, 1);
+	if (rc)
+		return rc;
 
-	if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
-		disable_irq(dev->irq);
 	pci_save_state(dev);
 
+	/*
+	 * both INTx and MSI are disabled after the Interrupt Disable bit
+	 * is set and the Bus Master bit is cleared.
+	 */
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
 
-	r = pci_execute_reset_function(dev);
+	rc = pci_dev_reset(dev, 0);
 
 	pci_restore_state(dev);
-	if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
-		enable_irq(dev->irq);
 
-	return r;
+	return rc;
 }
 EXPORT_SYMBOL_GPL(pci_reset_function);
 
@@ -2591,6 +2670,8 @@ static int __init pci_setup(char *str)
 			} else if (!strncmp(str, "resource_alignment=", 19)) {
 				pci_set_resource_alignment_param(str + 19,
 							strlen(str + 19));
+			} else if (!strncmp(str, "ecrc=", 5)) {
+				pcie_ecrc_get_policy(str + 5);
 			} else {
 				printk(KERN_ERR "PCI: Unknown option `%s'\n",
 						str);