diff options
Diffstat (limited to 'drivers/pci/quirks.c')
-rw-r--r-- | drivers/pci/quirks.c | 182 |
1 files changed, 31 insertions, 151 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 36db2098ee18..2990ad1e7c99 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1,15 +1,15 @@ // SPDX-License-Identifier: GPL-2.0 /* - * This file contains work-arounds for many known PCI hardware - * bugs. Devices present only on certain architectures (host - * bridges et cetera) should be handled in arch-specific code. + * This file contains work-arounds for many known PCI hardware bugs. + * Devices present only on certain architectures (host bridges et cetera) + * should be handled in arch-specific code. * - * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. + * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. * - * Copyright (c) 1999 Martin Mares <mj@ucw.cz> + * Copyright (c) 1999 Martin Mares <mj@ucw.cz> * - * Init/reset quirks for USB host controllers should be in the - * USB quirks file, where their drivers can access reuse it. + * Init/reset quirks for USB host controllers should be in the USB quirks + * file, where their drivers can use them. */ #include <linux/types.h> @@ -1968,31 +1968,6 @@ static void quirk_netmos(struct pci_dev *dev) DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); -/* - * Quirk non-zero PCI functions to route VPD access through function 0 for - * devices that share VPD resources between functions. The functions are - * expected to be identical devices. - */ -static void quirk_f0_vpd_link(struct pci_dev *dev) -{ - struct pci_dev *f0; - - if (!PCI_FUNC(dev->devfn)) - return; - - f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); - if (!f0) - return; - - if (f0->vpd && dev->class == f0->class && - dev->vendor == f0->vendor && dev->device == f0->device) - dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0; - - pci_dev_put(f0); -} -DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, - PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link); - static void quirk_e100_interrupt(struct pci_dev *dev) { u16 command, pmcsr; @@ -2183,83 +2158,6 @@ static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); -/* - * If a device follows the VPD format spec, the PCI core will not read or - * write past the VPD End Tag. But some vendors do not follow the VPD - * format spec, so we can't tell how much data is safe to access. Devices - * may behave unpredictably if we access too much. Blacklist these devices - * so we don't touch VPD at all. - */ -static void quirk_blacklist_vpd(struct pci_dev *dev) -{ - if (dev->vpd) { - dev->vpd->len = 0; - pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n"); - } -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, - quirk_blacklist_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd); - -/* - * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the - * VPD end tag will hang the device. This problem was initially - * observed when a vpd entry was created in sysfs - * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry - * will dump 32k of data. Reading a full 32k will cause an access - * beyond the VPD end tag causing the device to hang. Once the device - * is hung, the bnx2 driver will not be able to reset the device. - * We believe that it is legal to read beyond the end tag and - * therefore the solution is to limit the read/write length. - */ -static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) -{ - /* - * Only disable the VPD capability for 5706, 5706S, 5708, - * 5708S and 5709 rev. A - */ - if ((dev->device == PCI_DEVICE_ID_NX2_5706) || - (dev->device == PCI_DEVICE_ID_NX2_5706S) || - (dev->device == PCI_DEVICE_ID_NX2_5708) || - (dev->device == PCI_DEVICE_ID_NX2_5708S) || - ((dev->device == PCI_DEVICE_ID_NX2_5709) && - (dev->revision & 0xf0) == 0x0)) { - if (dev->vpd) - dev->vpd->len = 0x80; - } -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5706, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5706S, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5708, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5708S, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5709, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5709S, - quirk_brcm_570x_limit_vpd); - static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) { u32 rev; @@ -3086,16 +2984,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); static ktime_t fixup_debug_start(struct pci_dev *dev, void (*fn)(struct pci_dev *dev)) { - ktime_t calltime = 0; + if (initcall_debug) + pci_info(dev, "calling %pF @ %i\n", fn, task_pid_nr(current)); - pci_dbg(dev, "calling %pF\n", fn); - if (initcall_debug) { - pr_debug("calling %pF @ %i for %s\n", - fn, task_pid_nr(current), dev_name(&dev->dev)); - calltime = ktime_get(); - } - - return calltime; + return ktime_get(); } static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, @@ -3104,13 +2996,11 @@ static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, ktime_t delta, rettime; unsigned long long duration; - if (initcall_debug) { - rettime = ktime_get(); - delta = ktime_sub(rettime, calltime); - duration = (unsigned long long) ktime_to_ns(delta) >> 10; - pr_debug("pci fixup %pF returned after %lld usecs for %s\n", - fn, duration, dev_name(&dev->dev)); - } + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + if (initcall_debug || duration > 10000) + pci_info(dev, "%pF took %lld usecs\n", fn, duration); } /* @@ -3399,32 +3289,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE, quirk_thunderbolt_hotplug_msi); -static void quirk_chelsio_extend_vpd(struct pci_dev *dev) -{ - int chip = (dev->device & 0xf000) >> 12; - int func = (dev->device & 0x0f00) >> 8; - int prod = (dev->device & 0x00ff) >> 0; - - /* - * If this is a T3-based adapter, there's a 1KB VPD area at offset - * 0xc00 which contains the preferred VPD values. If this is a T4 or - * later based adapter, the special VPD is at offset 0x400 for the - * Physical Functions (the SR-IOV Virtual Functions have no VPD - * Capabilities). The PCI VPD Access core routines will normally - * compute the size of the VPD by parsing the VPD Data Structure at - * offset 0x000. This will result in silent failures when attempting - * to accesses these other VPD areas which are beyond those computed - * limits. - */ - if (chip == 0x0 && prod >= 0x20) - pci_set_vpd_size(dev, 8192); - else if (chip >= 0x4 && func < 0x8) - pci_set_vpd_size(dev, 2048); -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, - quirk_chelsio_extend_vpd); - #ifdef CONFIG_ACPI /* * Apple: Shutdown Cactus Ridge Thunderbolt controller. @@ -3885,6 +3749,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182, /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220, + quirk_dma_func1_alias); /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, quirk_dma_func1_alias); @@ -4505,6 +4372,15 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, /* APM X-Gene */ { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs }, + /* Ampere Computing */ + { PCI_VENDOR_ID_AMPERE, 0xE005, pci_quirk_xgene_acs }, + { PCI_VENDOR_ID_AMPERE, 0xE006, pci_quirk_xgene_acs }, + { PCI_VENDOR_ID_AMPERE, 0xE007, pci_quirk_xgene_acs }, + { PCI_VENDOR_ID_AMPERE, 0xE008, pci_quirk_xgene_acs }, + { PCI_VENDOR_ID_AMPERE, 0xE009, pci_quirk_xgene_acs }, + { PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs }, + { PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs }, + { PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs }, { 0 } }; @@ -4797,9 +4673,13 @@ static void quirk_no_ext_tags(struct pci_dev *pdev) pci_walk_bus(bridge->bus, pci_configure_extended_tags, NULL); } +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0132, quirk_no_ext_tags); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0140, quirk_no_ext_tags); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0141, quirk_no_ext_tags); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0142, quirk_no_ext_tags); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0144, quirk_no_ext_tags); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0420, quirk_no_ext_tags); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0422, quirk_no_ext_tags); #ifdef CONFIG_PCI_ATS /* |