diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/quirks.c | 80 |
1 files changed, 50 insertions, 30 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 1e6eda25c0d8..1e6e1e4d3327 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1218,45 +1218,65 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_a * do this early on to make the additional device appear during * the PCI scanning. */ - -static void quirk_jmicron_dualfn(struct pci_dev *pdev) +static void quirk_jmicron_ata(struct pci_dev *pdev) { - u32 conf; + u32 conf1, conf5; u8 hdr; /* Only poke fn 0 */ if (PCI_FUNC(pdev->devfn)) return; - switch(pdev->device) { - case PCI_DEVICE_ID_JMICRON_JMB365: - case PCI_DEVICE_ID_JMICRON_JMB366: - /* Redirect IDE second PATA port to the right spot */ - pci_read_config_dword(pdev, 0x80, &conf); - conf |= (1 << 24); - /* Fall through */ - pci_write_config_dword(pdev, 0x80, conf); - case PCI_DEVICE_ID_JMICRON_JMB361: - case PCI_DEVICE_ID_JMICRON_JMB363: - pci_read_config_dword(pdev, 0x40, &conf); - /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ - /* Set the class codes correctly and then direct IDE 0 */ - conf &= ~0x000FF200; /* Clear bit 9 and 12-19 */ - conf |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */ - pci_write_config_dword(pdev, 0x40, conf); - - /* Reconfigure so that the PCI scanner discovers the - device is now multifunction */ - - pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); - pdev->hdr_type = hdr & 0x7f; - pdev->multifunction = !!(hdr & 0x80); + pci_read_config_dword(pdev, 0x40, &conf1); + pci_read_config_dword(pdev, 0x80, &conf5); - break; + conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ + conf5 &= ~(1 << 24); /* Clear bit 24 */ + + switch (pdev->device) { + case PCI_DEVICE_ID_JMICRON_JMB360: + /* The controller should be in single function ahci mode */ + conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ + break; + + case PCI_DEVICE_ID_JMICRON_JMB365: + case PCI_DEVICE_ID_JMICRON_JMB366: + /* Redirect IDE second PATA port to the right spot */ + conf5 |= (1 << 24); + /* Fall through */ + case PCI_DEVICE_ID_JMICRON_JMB361: + case PCI_DEVICE_ID_JMICRON_JMB363: + /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ + /* Set the class codes correctly and then direct IDE 0 */ + conf1 |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */ + break; + + case PCI_DEVICE_ID_JMICRON_JMB368: + /* The controller should be in single function IDE mode */ + conf1 |= 0x00C00000; /* Set 22, 23 */ + break; } -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn); + + pci_write_config_dword(pdev, 0x40, conf1); + pci_write_config_dword(pdev, 0x80, conf5); + + /* Update pdev accordingly */ + pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); + pdev->hdr_type = hdr & 0x7f; + pdev->multifunction = !!(hdr & 0x80); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); #endif |