diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/host/pci-ftpci100.c | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/drivers/pci/host/pci-ftpci100.c b/drivers/pci/host/pci-ftpci100.c index e938eebcb180..5162dffc102b 100644 --- a/drivers/pci/host/pci-ftpci100.c +++ b/drivers/pci/host/pci-ftpci100.c @@ -25,6 +25,7 @@ #include <linux/irqchip/chained_irq.h> #include <linux/bitops.h> #include <linux/irq.h> +#include <linux/clk.h> /* * Special configuration registers directly in the first few words @@ -37,6 +38,7 @@ #define PCI_CONFIG 0x28 /* PCI configuration command register */ #define PCI_DATA 0x2C +#define FARADAY_PCI_STATUS_CMD 0x04 /* Status and command */ #define FARADAY_PCI_PMC 0x40 /* Power management control */ #define FARADAY_PCI_PMCSR 0x44 /* Power management status */ #define FARADAY_PCI_CTRL1 0x48 /* Control register 1 */ @@ -45,6 +47,8 @@ #define FARADAY_PCI_MEM2_BASE_SIZE 0x54 /* Memory base and size #2 */ #define FARADAY_PCI_MEM3_BASE_SIZE 0x58 /* Memory base and size #3 */ +#define PCI_STATUS_66MHZ_CAPABLE BIT(21) + /* Bits 31..28 gives INTD..INTA status */ #define PCI_CTRL2_INTSTS_SHIFT 28 #define PCI_CTRL2_INTMASK_CMDERR BIT(27) @@ -117,6 +121,7 @@ struct faraday_pci { void __iomem *base; struct irq_domain *irqdomain; struct pci_bus *bus; + struct clk *bus_clk; }; static int faraday_res_to_memcfg(resource_size_t mem_base, @@ -444,6 +449,9 @@ static int faraday_pci_probe(struct platform_device *pdev) struct resource *mem; struct resource *io; struct pci_host_bridge *host; + struct clk *clk; + unsigned char max_bus_speed = PCI_SPEED_33MHz; + unsigned char cur_bus_speed = PCI_SPEED_33MHz; int ret; u32 val; LIST_HEAD(res); @@ -462,6 +470,24 @@ static int faraday_pci_probe(struct platform_device *pdev) host->sysdata = p; p->dev = dev; + /* Retrieve and enable optional clocks */ + clk = devm_clk_get(dev, "PCLK"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "could not prepare PCLK\n"); + return ret; + } + p->bus_clk = devm_clk_get(dev, "PCICLK"); + if (IS_ERR(p->bus_clk)) + return PTR_ERR(clk); + ret = clk_prepare_enable(p->bus_clk); + if (ret) { + dev_err(dev, "could not prepare PCICLK\n"); + return ret; + } + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); p->base = devm_ioremap_resource(dev, regs); if (IS_ERR(p->base)) @@ -524,6 +550,34 @@ static int faraday_pci_probe(struct platform_device *pdev) } } + /* Check bus clock if we can gear up to 66 MHz */ + if (!IS_ERR(p->bus_clk)) { + unsigned long rate; + u32 val; + + faraday_raw_pci_read_config(p, 0, 0, + FARADAY_PCI_STATUS_CMD, 4, &val); + rate = clk_get_rate(p->bus_clk); + + if ((rate == 33000000) && (val & PCI_STATUS_66MHZ_CAPABLE)) { + dev_info(dev, "33MHz bus is 66MHz capable\n"); + max_bus_speed = PCI_SPEED_66MHz; + ret = clk_set_rate(p->bus_clk, 66000000); + if (ret) + dev_err(dev, "failed to set bus clock\n"); + } else { + dev_info(dev, "33MHz only bus\n"); + max_bus_speed = PCI_SPEED_33MHz; + } + + /* Bumping the clock may fail so read back the rate */ + rate = clk_get_rate(p->bus_clk); + if (rate == 33000000) + cur_bus_speed = PCI_SPEED_33MHz; + if (rate == 66000000) + cur_bus_speed = PCI_SPEED_66MHz; + } + ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node); if (ret) return ret; @@ -535,6 +589,8 @@ static int faraday_pci_probe(struct platform_device *pdev) return ret; } p->bus = host->bus; + p->bus->max_bus_speed = max_bus_speed; + p->bus->cur_bus_speed = cur_bus_speed; pci_bus_assign_resources(p->bus); pci_bus_add_devices(p->bus); |