diff options
Diffstat (limited to 'drivers/pci')
40 files changed, 404 insertions, 303 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 941970936840..952addc7bacf 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -1,61 +1,40 @@ # SPDX-License-Identifier: GPL-2.0 # # Makefile for the PCI bus specific drivers. -# -obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o remove.o pci.o \ - pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ - irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o +obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \ + remove.o pci.o pci-driver.o search.o \ + pci-sysfs.o rom.o setup-res.o irq.o vpd.o \ + setup-bus.o vc.o mmap.o setup-irq.o ifdef CONFIG_PCI -obj-$(CONFIG_PROC_FS) += proc.o -obj-$(CONFIG_SYSFS) += slot.o -obj-$(CONFIG_OF) += of.o +obj-$(CONFIG_PROC_FS) += proc.o +obj-$(CONFIG_SYSFS) += slot.o +obj-$(CONFIG_OF) += of.o endif -obj-$(CONFIG_PCI_QUIRKS) += quirks.o - -# Build PCI Express stuff if needed -obj-$(CONFIG_PCIEPORTBUS) += pcie/ - -# Build the PCI Hotplug drivers if we were asked to -obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ - -# Build the PCI MSI interrupt support -obj-$(CONFIG_PCI_MSI) += msi.o - -obj-$(CONFIG_PCI_ATS) += ats.o -obj-$(CONFIG_PCI_IOV) += iov.o - -# -# ACPI Related PCI FW Functions -# ACPI _DSM provided firmware instance and string name -# -obj-$(CONFIG_ACPI) += pci-acpi.o - -# SMBIOS provided firmware instance and labels -obj-$(CONFIG_PCI_LABEL) += pci-label.o - -# Intel MID platform PM support -obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o - -obj-$(CONFIG_PCI_SYSCALL) += syscall.o - -obj-$(CONFIG_PCI_STUB) += pci-stub.o - -obj-$(CONFIG_PCI_ECAM) += ecam.o - +obj-$(CONFIG_PCI_QUIRKS) += quirks.o +obj-$(CONFIG_PCIEPORTBUS) += pcie/ +obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ +obj-$(CONFIG_PCI_MSI) += msi.o +obj-$(CONFIG_PCI_ATS) += ats.o +obj-$(CONFIG_PCI_IOV) += iov.o +obj-$(CONFIG_ACPI) += pci-acpi.o +obj-$(CONFIG_PCI_LABEL) += pci-label.o +obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o +obj-$(CONFIG_PCI_SYSCALL) += syscall.o +obj-$(CONFIG_PCI_STUB) += pci-stub.o +obj-$(CONFIG_PCI_ECAM) += ecam.o obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o -ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG - -# PCI host controller drivers -obj-y += host/ -obj-y += switch/ +obj-y += host/ +obj-y += switch/ +# Endpoint library must be initialized before its users obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ -# Endpoint library must be initialized before its users obj-$(CONFIG_PCIE_CADENCE) += cadence/ # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW obj-y += dwc/ + +ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 5e9a9822d9d4..dcaacb4bb880 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -17,9 +17,9 @@ DEFINE_RAW_SPINLOCK(pci_lock); /* - * Wrappers for all PCI configuration access functions. They just check - * alignment, do locking and call the low-level functions pointed to - * by pci_dev->ops. + * Wrappers for all PCI configuration access functions. They just check + * alignment, do locking and call the low-level functions pointed to + * by pci_dev->ops. */ #define PCI_byte_BAD 0 @@ -686,8 +686,10 @@ void pci_cfg_access_unlock(struct pci_dev *dev) raw_spin_lock_irqsave(&pci_lock, flags); - /* This indicates a problem in the caller, but we don't need - * to kill them, unlike a double-block above. */ + /* + * This indicates a problem in the caller, but we don't need + * to kill them, unlike a double-block above. + */ WARN_ON(!dev->block_cfg_access); dev->block_cfg_access = 0; diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c index 6ad80a1fd5a7..89305b569d3d 100644 --- a/drivers/pci/ats.c +++ b/drivers/pci/ats.c @@ -1,14 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/ats.c - * - * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com> - * Copyright (C) 2011 Advanced Micro Devices, - * - * PCI Express I/O Virtualization (IOV) support. + * PCI Express I/O Virtualization (IOV) support * Address Translation Service 1.0 * Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com> * PASID support added by Joerg Roedel <joerg.roedel@amd.com> + * + * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com> + * Copyright (C) 2011 Advanced Micro Devices, */ #include <linux/export.h> diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 737d1c52f002..bc2ded4c451f 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/bus.c - * * From setup-res.c, by: * Dave Rusling (david.rusling@reo.mts.dec.com) * David Mosberger (davidm@cs.arizona.edu) diff --git a/drivers/pci/host-bridge.c b/drivers/pci/host-bridge.c index ac8d81268296..e01d53f5b32f 100644 --- a/drivers/pci/host-bridge.c +++ b/drivers/pci/host-bridge.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * host bridge related code + * Host bridge related code */ #include <linux/kernel.h> diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index e2198a2feeca..b45b375c0e6c 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -541,6 +541,7 @@ static unsigned int get_slot_status(struct acpiphp_slot *slot) { unsigned long long sta = 0; struct acpiphp_func *func; + u32 dvid; list_for_each_entry(func, &slot->funcs, sibling) { if (func->flags & FUNC_HAS_STA) { @@ -551,19 +552,27 @@ static unsigned int get_slot_status(struct acpiphp_slot *slot) if (ACPI_SUCCESS(status) && sta) break; } else { - u32 dvid; - - pci_bus_read_config_dword(slot->bus, - PCI_DEVFN(slot->device, - func->function), - PCI_VENDOR_ID, &dvid); - if (dvid != 0xffffffff) { + if (pci_bus_read_dev_vendor_id(slot->bus, + PCI_DEVFN(slot->device, func->function), + &dvid, 0)) { sta = ACPI_STA_ALL; break; } } } + if (!sta) { + /* + * Check for the slot itself since it may be that the + * ACPI slot is a device below PCIe upstream port so in + * that case it may not even be reachable yet. + */ + if (pci_bus_read_dev_vendor_id(slot->bus, + PCI_DEVFN(slot->device, 0), &dvid, 0)) { + sta = ACPI_STA_ALL; + } + } + return (unsigned int)sta; } diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index b1b6e45253b2..616df442520b 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -2812,18 +2812,16 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func dbg("CND: length = 0x%x\n", base); io_node = get_io_resource(&(resources->io_head), base); + if (!io_node) + return -ENOMEM; dbg("Got io_node start = %8.8x, length = %8.8x next (%p)\n", io_node->base, io_node->length, io_node->next); dbg("func (%p) io_head (%p)\n", func, func->io_head); /* allocate the resource to the board */ - if (io_node) { - base = io_node->base; - - io_node->next = func->io_head; - func->io_head = io_node; - } else - return -ENOMEM; + base = io_node->base; + io_node->next = func->io_head; + func->io_head = io_node; } else if ((temp_register & 0x0BL) == 0x08) { /* Map prefetchable memory */ base = temp_register & 0xFFFFFFF0; diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index 677924ae0350..538de9057c23 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -1,12 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/iov.c - * - * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com> - * - * PCI Express I/O Virtualization (IOV) support. + * PCI Express I/O Virtualization (IOV) support * Single Root IOV 1.0 * Address Translation Service 1.0 + * + * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com> */ #include <linux/pci.h> diff --git a/drivers/pci/mmap.c b/drivers/pci/mmap.c index 814a3ce341fc..24505b08de40 100644 --- a/drivers/pci/mmap.c +++ b/drivers/pci/mmap.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * mmap.c — generic PCI resource mmap helper + * Generic PCI resource mmap helper * * Copyright © 2017 Amazon.com, Inc. or its affiliates. * diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 8b0729c94bb7..30250631efe7 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * File: msi.c - * Purpose: PCI Message Signaled Interrupt (MSI) + * PCI Message Signaled Interrupt (MSI) * * Copyright (C) 2003-2004 Intel * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 78157688dcc9..1abdbf267c19 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * File: pci-acpi.c - * Purpose: Provide PCI support in ACPI + * PCI support in ACPI * * Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com> * Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 21eb2f7ad95d..28cf87a7ff4c 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/pci-driver.c - * * (C) Copyright 2002-2004, 2007 Greg Kroah-Hartman <greg@kroah.com> * (C) Copyright 2007 Novell Inc. */ @@ -1532,6 +1530,42 @@ static int pci_uevent(struct device *dev, struct kobj_uevent_env *env) return 0; } +#if defined(CONFIG_PCIEAER) || defined(CONFIG_EEH) +/** + * pci_uevent_ers - emit a uevent during recovery path of PCI device + * @pdev: PCI device undergoing error recovery + * @err_type: type of error event + */ +void pci_uevent_ers(struct pci_dev *pdev, enum pci_ers_result err_type) +{ + int idx = 0; + char *envp[3]; + + switch (err_type) { + case PCI_ERS_RESULT_NONE: + case PCI_ERS_RESULT_CAN_RECOVER: + envp[idx++] = "ERROR_EVENT=BEGIN_RECOVERY"; + envp[idx++] = "DEVICE_ONLINE=0"; + break; + case PCI_ERS_RESULT_RECOVERED: + envp[idx++] = "ERROR_EVENT=SUCCESSFUL_RECOVERY"; + envp[idx++] = "DEVICE_ONLINE=1"; + break; + case PCI_ERS_RESULT_DISCONNECT: + envp[idx++] = "ERROR_EVENT=FAILED_RECOVERY"; + envp[idx++] = "DEVICE_ONLINE=0"; + break; + default: + break; + } + + if (idx > 0) { + envp[idx++] = NULL; + kobject_uevent_env(&pdev->dev.kobj, KOBJ_CHANGE, envp); + } +} +#endif + static int pci_bus_num_vf(struct device *dev) { return pci_num_vf(to_pci_dev(dev)); diff --git a/drivers/pci/pci-label.c b/drivers/pci/pci-label.c index a961a71d950f..a5910f942857 100644 --- a/drivers/pci/pci-label.c +++ b/drivers/pci/pci-label.c @@ -1,7 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Purpose: Export the firmware instance and label associated with - * a pci device to sysfs + * Export the firmware instance and label associated with a PCI device to + * sysfs + * * Copyright (C) 2010 Dell Inc. * by Narendra K <Narendra_K@dell.com>, * Jordan Hargrave <Jordan_Hargrave@dell.com> diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c index 10d54f939048..66f8a59fadbd 100644 --- a/drivers/pci/pci-stub.c +++ b/drivers/pci/pci-stub.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 -/* pci-stub - simple stub driver to reserve a pci device +/* + * Simple stub driver to reserve a PCI device * * Copyright (C) 2008 Red Hat, Inc. * Author: diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index eb6bee8724cc..478dde8330c3 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/pci-sysfs.c - * * (C) Copyright 2002-2004 Greg Kroah-Hartman <greg@kroah.com> * (C) Copyright 2002-2004 IBM Corp. * (C) Copyright 2003 Matthew Wilcox @@ -12,7 +10,6 @@ * File attributes for PCI devices * * Modeled after usb's driverfs.c - * */ @@ -158,45 +155,18 @@ static DEVICE_ATTR_RO(resource); static ssize_t max_link_speed_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct pci_dev *pci_dev = to_pci_dev(dev); - u32 linkcap; - int err; - const char *speed; - - err = pcie_capability_read_dword(pci_dev, PCI_EXP_LNKCAP, &linkcap); - if (err) - return -EINVAL; - - switch (linkcap & PCI_EXP_LNKCAP_SLS) { - case PCI_EXP_LNKCAP_SLS_8_0GB: - speed = "8 GT/s"; - break; - case PCI_EXP_LNKCAP_SLS_5_0GB: - speed = "5 GT/s"; - break; - case PCI_EXP_LNKCAP_SLS_2_5GB: - speed = "2.5 GT/s"; - break; - default: - speed = "Unknown speed"; - } + struct pci_dev *pdev = to_pci_dev(dev); - return sprintf(buf, "%s\n", speed); + return sprintf(buf, "%s\n", PCIE_SPEED2STR(pcie_get_speed_cap(pdev))); } static DEVICE_ATTR_RO(max_link_speed); static ssize_t max_link_width_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct pci_dev *pci_dev = to_pci_dev(dev); - u32 linkcap; - int err; - - err = pcie_capability_read_dword(pci_dev, PCI_EXP_LNKCAP, &linkcap); - if (err) - return -EINVAL; + struct pci_dev *pdev = to_pci_dev(dev); - return sprintf(buf, "%u\n", (linkcap & PCI_EXP_LNKCAP_MLW) >> 4); + return sprintf(buf, "%u\n", pcie_get_width_cap(pdev)); } static DEVICE_ATTR_RO(max_link_width); @@ -213,6 +183,9 @@ static ssize_t current_link_speed_show(struct device *dev, return -EINVAL; switch (linkstat & PCI_EXP_LNKSTA_CLS) { + case PCI_EXP_LNKSTA_CLS_16_0GB: + speed = "16 GT/s"; + break; case PCI_EXP_LNKSTA_CLS_8_0GB: speed = "8 GT/s"; break; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 120e3393fc35..bfac1d5ae842 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1,11 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /* - * PCI Bus Services, see include/linux/pci.h for further explanation. + * PCI Bus Services, see include/linux/pci.h for further explanation. * - * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter, - * David Mosberger-Tang + * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter, + * David Mosberger-Tang * - * Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz> + * Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz> */ #include <linux/acpi.h> @@ -22,6 +22,7 @@ #include <linux/spinlock.h> #include <linux/string.h> #include <linux/log2.h> +#include <linux/logic_pio.h> #include <linux/pci-aspm.h> #include <linux/pm_wakeup.h> #include <linux/interrupt.h> @@ -3449,68 +3450,35 @@ int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name) } EXPORT_SYMBOL(pci_request_regions_exclusive); -#ifdef PCI_IOBASE -struct io_range { - struct list_head list; - phys_addr_t start; - resource_size_t size; -}; - -static LIST_HEAD(io_range_list); -static DEFINE_SPINLOCK(io_range_lock); -#endif - /* * Record the PCI IO range (expressed as CPU physical address + size). * Return a negative value if an error has occured, zero otherwise */ -int __weak pci_register_io_range(phys_addr_t addr, resource_size_t size) +int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr, + resource_size_t size) { - int err = 0; - + int ret = 0; #ifdef PCI_IOBASE - struct io_range *range; - resource_size_t allocated_size = 0; - - /* check if the range hasn't been previously recorded */ - spin_lock(&io_range_lock); - list_for_each_entry(range, &io_range_list, list) { - if (addr >= range->start && addr + size <= range->start + size) { - /* range already registered, bail out */ - goto end_register; - } - allocated_size += range->size; - } - - /* range not registed yet, check for available space */ - if (allocated_size + size - 1 > IO_SPACE_LIMIT) { - /* if it's too big check if 64K space can be reserved */ - if (allocated_size + SZ_64K - 1 > IO_SPACE_LIMIT) { - err = -E2BIG; - goto end_register; - } + struct logic_pio_hwaddr *range; - size = SZ_64K; - pr_warn("Requested IO range too big, new size set to 64K\n"); - } + if (!size || addr + size < addr) + return -EINVAL; - /* add the range to the list */ range = kzalloc(sizeof(*range), GFP_ATOMIC); - if (!range) { - err = -ENOMEM; - goto end_register; - } + if (!range) + return -ENOMEM; - range->start = addr; + range->fwnode = fwnode; range->size = size; + range->hw_start = addr; + range->flags = LOGIC_PIO_CPU_MMIO; - list_add_tail(&range->list, &io_range_list); - -end_register: - spin_unlock(&io_range_lock); + ret = logic_pio_register_range(range); + if (ret) + kfree(range); #endif - return err; + return ret; } phys_addr_t pci_pio_to_address(unsigned long pio) @@ -3518,21 +3486,10 @@ phys_addr_t pci_pio_to_address(unsigned long pio) phys_addr_t address = (phys_addr_t)OF_BAD_ADDR; #ifdef PCI_IOBASE - struct io_range *range; - resource_size_t allocated_size = 0; - - if (pio > IO_SPACE_LIMIT) + if (pio >= MMIO_UPPER_LIMIT) return address; - spin_lock(&io_range_lock); - list_for_each_entry(range, &io_range_list, list) { - if (pio >= allocated_size && pio < allocated_size + range->size) { - address = range->start + pio - allocated_size; - break; - } - allocated_size += range->size; - } - spin_unlock(&io_range_lock); + address = logic_pio_to_hwaddr(pio); #endif return address; @@ -3541,21 +3498,7 @@ phys_addr_t pci_pio_to_address(unsigned long pio) unsigned long __weak pci_address_to_pio(phys_addr_t address) { #ifdef PCI_IOBASE - struct io_range *res; - resource_size_t offset = 0; - unsigned long addr = -1; - - spin_lock(&io_range_lock); - list_for_each_entry(res, &io_range_list, list) { - if (address >= res->start && address < res->start + res->size) { - addr = address - res->start + offset; - break; - } - offset += res->size; - } - spin_unlock(&io_range_lock); - - return addr; + return logic_pio_trans_cpuaddr(address); #else if (address > IO_SPACE_LIMIT) return (unsigned long)-1; @@ -4192,6 +4135,7 @@ void pci_reset_secondary_bus(struct pci_dev *dev) pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); ctrl |= PCI_BRIDGE_CTL_BUS_RESET; pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + /* * PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms. Double * this to 2ms to ensure that we meet the minimum requirement. @@ -5156,6 +5100,180 @@ int pcie_get_minimum_link(struct pci_dev *dev, enum pci_bus_speed *speed, EXPORT_SYMBOL(pcie_get_minimum_link); /** + * pcie_bandwidth_available - determine minimum link settings of a PCIe + * device and its bandwidth limitation + * @dev: PCI device to query + * @limiting_dev: storage for device causing the bandwidth limitation + * @speed: storage for speed of limiting device + * @width: storage for width of limiting device + * + * Walk up the PCI device chain and find the point where the minimum + * bandwidth is available. Return the bandwidth available there and (if + * limiting_dev, speed, and width pointers are supplied) information about + * that point. The bandwidth returned is in Mb/s, i.e., megabits/second of + * raw bandwidth. + */ +u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev, + enum pci_bus_speed *speed, + enum pcie_link_width *width) +{ + u16 lnksta; + enum pci_bus_speed next_speed; + enum pcie_link_width next_width; + u32 bw, next_bw; + + if (speed) + *speed = PCI_SPEED_UNKNOWN; + if (width) + *width = PCIE_LNK_WIDTH_UNKNOWN; + + bw = 0; + + while (dev) { + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta); + + next_speed = pcie_link_speed[lnksta & PCI_EXP_LNKSTA_CLS]; + next_width = (lnksta & PCI_EXP_LNKSTA_NLW) >> + PCI_EXP_LNKSTA_NLW_SHIFT; + + next_bw = next_width * PCIE_SPEED2MBS_ENC(next_speed); + + /* Check if current device limits the total bandwidth */ + if (!bw || next_bw <= bw) { + bw = next_bw; + + if (limiting_dev) + *limiting_dev = dev; + if (speed) + *speed = next_speed; + if (width) + *width = next_width; + } + + dev = pci_upstream_bridge(dev); + } + + return bw; +} +EXPORT_SYMBOL(pcie_bandwidth_available); + +/** + * pcie_get_speed_cap - query for the PCI device's link speed capability + * @dev: PCI device to query + * + * Query the PCI device speed capability. Return the maximum link speed + * supported by the device. + */ +enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev) +{ + u32 lnkcap2, lnkcap; + + /* + * PCIe r4.0 sec 7.5.3.18 recommends using the Supported Link + * Speeds Vector in Link Capabilities 2 when supported, falling + * back to Max Link Speed in Link Capabilities otherwise. + */ + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2); + if (lnkcap2) { /* PCIe r3.0-compliant */ + if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_16_0GB) + return PCIE_SPEED_16_0GT; + else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_8_0GB) + return PCIE_SPEED_8_0GT; + else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_5_0GB) + return PCIE_SPEED_5_0GT; + else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_2_5GB) + return PCIE_SPEED_2_5GT; + return PCI_SPEED_UNKNOWN; + } + + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); + if (lnkcap) { + if (lnkcap & PCI_EXP_LNKCAP_SLS_16_0GB) + return PCIE_SPEED_16_0GT; + else if (lnkcap & PCI_EXP_LNKCAP_SLS_8_0GB) + return PCIE_SPEED_8_0GT; + else if (lnkcap & PCI_EXP_LNKCAP_SLS_5_0GB) + return PCIE_SPEED_5_0GT; + else if (lnkcap & PCI_EXP_LNKCAP_SLS_2_5GB) + return PCIE_SPEED_2_5GT; + } + + return PCI_SPEED_UNKNOWN; +} + +/** + * pcie_get_width_cap - query for the PCI device's link width capability + * @dev: PCI device to query + * + * Query the PCI device width capability. Return the maximum link width + * supported by the device. + */ +enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev) +{ + u32 lnkcap; + + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); + if (lnkcap) + return (lnkcap & PCI_EXP_LNKCAP_MLW) >> 4; + + return PCIE_LNK_WIDTH_UNKNOWN; +} + +/** + * pcie_bandwidth_capable - calculate a PCI device's link bandwidth capability + * @dev: PCI device + * @speed: storage for link speed + * @width: storage for link width + * + * Calculate a PCI device's link bandwidth by querying for its link speed + * and width, multiplying them, and applying encoding overhead. The result + * is in Mb/s, i.e., megabits/second of raw bandwidth. + */ +u32 pcie_bandwidth_capable(struct pci_dev *dev, enum pci_bus_speed *speed, + enum pcie_link_width *width) +{ + *speed = pcie_get_speed_cap(dev); + *width = pcie_get_width_cap(dev); + + if (*speed == PCI_SPEED_UNKNOWN || *width == PCIE_LNK_WIDTH_UNKNOWN) + return 0; + + return *width * PCIE_SPEED2MBS_ENC(*speed); +} + +/** + * pcie_print_link_status - Report the PCI device's link speed and width + * @dev: PCI device to query + * + * Report the available bandwidth at the device. If this is less than the + * device is capable of, report the device's maximum possible bandwidth and + * the upstream link that limits its performance to less than that. + */ +void pcie_print_link_status(struct pci_dev *dev) +{ + enum pcie_link_width width, width_cap; + enum pci_bus_speed speed, speed_cap; + struct pci_dev *limiting_dev = NULL; + u32 bw_avail, bw_cap; + + bw_cap = pcie_bandwidth_capable(dev, &speed_cap, &width_cap); + bw_avail = pcie_bandwidth_available(dev, &limiting_dev, &speed, &width); + + if (bw_avail >= bw_cap) + pci_info(dev, "%u.%03u Gb/s available bandwidth (%s x%d link)\n", + bw_cap / 1000, bw_cap % 1000, + PCIE_SPEED2STR(speed_cap), width_cap); + else + pci_info(dev, "%u.%03u Gb/s available bandwidth, limited by %s x%d link at %s (capable of %u.%03u Gb/s with %s x%d link)\n", + bw_avail / 1000, bw_avail % 1000, + PCIE_SPEED2STR(speed), width, + limiting_dev ? pci_name(limiting_dev) : "<unknown>", + bw_cap / 1000, bw_cap % 1000, + PCIE_SPEED2STR(speed_cap), width_cap); +} +EXPORT_SYMBOL(pcie_print_link_status); + +/** * pci_select_bars - Make BAR mask from the type of resource * @dev: the PCI device for which BAR mask is made * @flags: resource type mask to be selected @@ -5620,8 +5738,9 @@ static int of_pci_bus_find_domain_nr(struct device *parent) use_dt_domains = 0; domain = pci_get_new_domain_nr(); } else { - dev_err(parent, "Node %pOF has inconsistent \"linux,pci-domain\" property in DT\n", - parent->of_node); + if (parent) + pr_err("Node %pOF has ", parent->of_node); + pr_err("Inconsistent \"linux,pci-domain\" property in DT\n"); domain = -1; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 813ca2c895d8..38b2596df38a 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -254,6 +254,27 @@ bool pci_bus_clip_resource(struct pci_dev *dev, int idx); void pci_reassigndev_resource_alignment(struct pci_dev *dev); void pci_disable_bridge_window(struct pci_dev *dev); +/* PCIe link information */ +#define PCIE_SPEED2STR(speed) \ + ((speed) == PCIE_SPEED_16_0GT ? "16 GT/s" : \ + (speed) == PCIE_SPEED_8_0GT ? "8 GT/s" : \ + (speed) == PCIE_SPEED_5_0GT ? "5 GT/s" : \ + (speed) == PCIE_SPEED_2_5GT ? "2.5 GT/s" : \ + "Unknown speed") + +/* PCIe speed to Mb/s reduced by encoding overhead */ +#define PCIE_SPEED2MBS_ENC(speed) \ + ((speed) == PCIE_SPEED_16_0GT ? 16000*128/130 : \ + (speed) == PCIE_SPEED_8_0GT ? 8000*128/130 : \ + (speed) == PCIE_SPEED_5_0GT ? 5000*8/10 : \ + (speed) == PCIE_SPEED_2_5GT ? 2500*8/10 : \ + 0) + +enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev); +enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev); +u32 pcie_bandwidth_capable(struct pci_dev *dev, enum pci_bus_speed *speed, + enum pcie_link_width *width); + /* Single Root I/O Virtualization */ struct pci_sriov { int pos; /* Capability position */ diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile index 30557a567ee7..800e1d404a45 100644 --- a/drivers/pci/pcie/Makefile +++ b/drivers/pci/pcie/Makefile @@ -1,19 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 # -# Makefile for PCI-Express PORT Driver -# - -# Build PCI Express ASPM if needed -obj-$(CONFIG_PCIEASPM) += aspm.o +# Makefile for PCI Express features and port driver pcieportdrv-y := portdrv_core.o portdrv_pci.o obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o -# Build PCI Express AER if needed +obj-$(CONFIG_PCIEASPM) += aspm.o obj-$(CONFIG_PCIEAER) += aer/ - -obj-$(CONFIG_PCIE_PME) += pme.o - -obj-$(CONFIG_PCIE_DPC) += dpc.o -obj-$(CONFIG_PCIE_PTM) += ptm.o +obj-$(CONFIG_PCIE_PME) += pme.o +obj-$(CONFIG_PCIE_DPC) += dpc.o +obj-$(CONFIG_PCIE_PTM) += ptm.o diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 28329e16ad8f..779b3879b1b5 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -1,15 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/pcie/aer/aerdrv.c - * - * This file implements the AER root port service driver. The driver will - * register an irq handler. When root port triggers an AER interrupt, the irq - * handler will collect root port status and schedule a work. + * Implement the AER root port service driver. The driver registers an IRQ + * handler. When a root port triggers an AER interrupt, the IRQ handler + * collects root port status and schedules work. * * Copyright (C) 2006 Intel Corp. * Tom Long Nguyen (tom.l.nguyen@intel.com) * Zhang Yanmin (yanmin.zhang@intel.com) - * */ #include <linux/pci.h> diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index a884f68bada4..08b4584f62fe 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -3,7 +3,6 @@ * Copyright (C) 2006 Intel Corp. * Tom Long Nguyen (tom.l.nguyen@intel.com) * Zhang Yanmin (yanmin.zhang@intel.com) - * */ #ifndef _AERDRV_H_ diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index b2019440e882..08c87de13cb8 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -5,7 +5,6 @@ * Copyright (C) 2006 Intel Corp. * Tom Long Nguyen (tom.l.nguyen@intel.com) * Zhang Yanmin (yanmin.zhang@intel.com) - * */ #include <linux/module.h> diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index a4bfea52e7d4..0ea5acc40323 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -1,16 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/pcie/aer/aerdrv_core.c - * - * This file implements the core part of PCIe AER. When a PCIe - * error is delivered, an error message will be collected and printed to - * console, then, an error recovery procedure will be executed by following - * the PCI error recovery rules. + * Implement the core part of PCIe AER. When a PCIe error is delivered, an + * error message will be collected and printed to console, then an error + * recovery procedure will be executed by following the PCI error recovery + * rules. * * Copyright (C) 2006 Intel Corp. * Tom Long Nguyen (tom.l.nguyen@intel.com) * Zhang Yanmin (yanmin.zhang@intel.com) - * */ #include <linux/module.h> diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 6a352e638699..cfc89dd57831 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -1,13 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/pcie/aer/aerdrv_errprint.c - * * Format error messages and print them to console. * * Copyright (C) 2006 Intel Corp. * Tom Long Nguyen (tom.l.nguyen@intel.com) * Zhang Yanmin (yanmin.zhang@intel.com) - * */ #include <linux/module.h> diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c index afb5f761f5d4..039efb606e31 100644 --- a/drivers/pci/pcie/aer/ecrc.c +++ b/drivers/pci/pcie/aer/ecrc.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Enables/disables PCIe ECRC checking. + * Enable/disable PCIe ECRC checking * - * (C) Copyright 2009 Hewlett-Packard Development Company, L.P. + * (C) Copyright 2009 Hewlett-Packard Development Company, L.P. * Andrew Patterson <andrew.patterson@hp.com> */ diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 57feef2ecfe7..f76eb7704f64 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * File: drivers/pci/pcie/aspm.c - * Enabling PCIe link L0s/L1 state and Clock Power Management + * Enable PCIe link L0s/L1 state and Clock Power Management * * Copyright (C) 2007 Intel * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) @@ -228,6 +227,24 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) if (!(reg16 & PCI_EXP_LNKSTA_SLC)) same_clock = 0; + /* Port might be already in common clock mode */ + pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16); + if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) { + bool consistent = true; + + list_for_each_entry(child, &linkbus->devices, bus_list) { + pcie_capability_read_word(child, PCI_EXP_LNKCTL, + ®16); + if (!(reg16 & PCI_EXP_LNKCTL_CCC)) { + consistent = false; + break; + } + } + if (consistent) + return; + pci_warn(parent, "ASPM: current common clock configuration is broken, reconfiguring\n"); + } + /* Configure downstream component, all functions */ list_for_each_entry(child, &linkbus->devices, bus_list) { pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); @@ -322,7 +339,7 @@ static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val) static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value) { - u64 threshold_ns = threshold_us * 1000; + u32 threshold_ns = threshold_us * 1000; /* See PCIe r3.1, sec 7.33.3 and sec 6.18 */ if (threshold_ns < 32) { diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 3e0058a5500f..d0c6783dbfe3 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -1,7 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * File: portdrv.h - * Purpose: PCI Express Port Bus Driver's Data Structures + * Purpose: PCI Express Port Bus Driver's Internal Data Structures * * Copyright (C) 2004 Intel * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 4ba4d05a5e4c..c9c0663db282 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /* - * File: portdrv_core.c * Purpose: PCI Express Port Bus Driver's Core Functions * * Copyright (C) 2004 Intel diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 8e4260d25941..973f1b80a038 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -1,9 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* - * File: portdrv_pci.c * Purpose: PCI Express Port Bus Driver * Author: Tom Nguyen <tom.l.nguyen@intel.com> - * Version: v1.0 * * Copyright (C) 2004 Intel * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index a00de697a970..f26fcbf6942e 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * probe.c - PCI detection and setup code + * PCI detection and setup code */ #include <linux/kernel.h> @@ -602,7 +602,7 @@ const unsigned char pcie_link_speed[] = { PCIE_SPEED_2_5GT, /* 1 */ PCIE_SPEED_5_0GT, /* 2 */ PCIE_SPEED_8_0GT, /* 3 */ - PCI_SPEED_UNKNOWN, /* 4 */ + PCIE_SPEED_16_0GT, /* 4 */ PCI_SPEED_UNKNOWN, /* 5 */ PCI_SPEED_UNKNOWN, /* 6 */ PCI_SPEED_UNKNOWN, /* 7 */ diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 58a662e3c4a6..1ee8927a0635 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Procfs interface for the PCI bus. + * Procfs interface for the PCI bus * - * Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz> + * Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz> */ #include <linux/init.h> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index fc734014206f..8bf0ad91432a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1,15 +1,15 @@ // SPDX-License-Identifier: GPL-2.0 /* - * This file contains work-arounds for many known PCI hardware - * bugs. Devices present only on certain architectures (host - * bridges et cetera) should be handled in arch-specific code. + * This file contains work-arounds for many known PCI hardware bugs. + * Devices present only on certain architectures (host bridges et cetera) + * should be handled in arch-specific code. * - * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. + * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. * - * Copyright (c) 1999 Martin Mares <mj@ucw.cz> + * Copyright (c) 1999 Martin Mares <mj@ucw.cz> * - * Init/reset quirks for USB host controllers should be in the - * USB quirks file, where their drivers can access reuse it. + * Init/reset quirks for USB host controllers should be in the USB quirks + * file, where their drivers can use them. */ #include <linux/types.h> @@ -3104,16 +3104,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); static ktime_t fixup_debug_start(struct pci_dev *dev, void (*fn)(struct pci_dev *dev)) { - ktime_t calltime = 0; + if (initcall_debug) + pci_info(dev, "calling %pF @ %i\n", fn, task_pid_nr(current)); - pci_dbg(dev, "calling %pF\n", fn); - if (initcall_debug) { - pr_debug("calling %pF @ %i for %s\n", - fn, task_pid_nr(current), dev_name(&dev->dev)); - calltime = ktime_get(); - } - - return calltime; + return ktime_get(); } static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, @@ -3122,13 +3116,11 @@ static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, ktime_t delta, rettime; unsigned long long duration; - if (initcall_debug) { - rettime = ktime_get(); - delta = ktime_sub(rettime, calltime); - duration = (unsigned long long) ktime_to_ns(delta) >> 10; - pr_debug("pci fixup %pF returned after %lld usecs for %s\n", - fn, duration, dev_name(&dev->dev)); - } + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + if (initcall_debug || duration > 10000) + pci_info(dev, "%pF took %lld usecs\n", fn, duration); } /* diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 374a33443be9..a7b5c37a85ec 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -1,11 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/rom.c + * PCI ROM access routines * * (C) Copyright 2004 Jon Smirl <jonsmirl@yahoo.com> * (C) Copyright 2004 Silicon Graphics, Inc. Jesse Barnes <jbarnes@sgi.com> - * - * PCI ROM access routines */ #include <linux/kernel.h> #include <linux/export.h> diff --git a/drivers/pci/search.c b/drivers/pci/search.c index bc1e023f1353..2b5f720862d3 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -1,11 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /* - * PCI searching functions. + * PCI searching functions * - * Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter, + * Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter, * David Mosberger-Tang - * Copyright (C) 1997 -- 2000 Martin Mares <mj@ucw.cz> - * Copyright (C) 2003 -- 2004 Greg Kroah-Hartman <greg@kroah.com> + * Copyright (C) 1997 -- 2000 Martin Mares <mj@ucw.cz> + * Copyright (C) 2003 -- 2004 Greg Kroah-Hartman <greg@kroah.com> */ #include <linux/pci.h> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 3cce29a069e6..072784f55ea5 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1,16 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/setup-bus.c + * Support routines for initializing a PCI subsystem * * Extruded from code written by * Dave Rusling (david.rusling@reo.mts.dec.com) * David Mosberger (davidm@cs.arizona.edu) * David Miller (davem@redhat.com) * - * Support routines for initializing a PCI subsystem. - */ - -/* * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru> * PCI-PCI bridges cleanup, sorted resource allocation. * Feb 2002, Ivan Kokshaysky <ink@jurassic.park.msu.ru> diff --git a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c index 5ad4ee7d7b1e..7129494754dd 100644 --- a/drivers/pci/setup-irq.c +++ b/drivers/pci/setup-irq.c @@ -1,13 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/setup-irq.c + * Support routines for initializing a PCI subsystem * * Extruded from code written by * Dave Rusling (david.rusling@reo.mts.dec.com) * David Mosberger (davidm@cs.arizona.edu) * David Miller (davem@redhat.com) - * - * Support routines for initializing a PCI subsystem. */ diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 369d48d6c6f1..1ef01d79b52e 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -1,18 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/setup-res.c + * Support routines for initializing a PCI subsystem * * Extruded from code written by * Dave Rusling (david.rusling@reo.mts.dec.com) * David Mosberger (davidm@cs.arizona.edu) * David Miller (davem@redhat.com) * - * Support routines for initializing a PCI subsystem. - */ - -/* fixed for multiple pci buses, 1999 Andrea Arcangeli <andrea@suse.de> */ - -/* + * Fixed for multiple PCI buses, 1999 Andrea Arcangeli <andrea@suse.de> + * * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru> * Resource sorting */ diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index d10f556dc03e..e634229ece89 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/pci/slot.c * Copyright (C) 2006 Matthew Wilcox <matthew@wil.cx> * Copyright (C) 2006-2009 Hewlett-Packard Development Company, L.P. * Alex Chiang <achiang@hp.com> @@ -76,6 +75,7 @@ static const char *pci_bus_speed_strings[] = { "2.5 GT/s PCIe", /* 0x14 */ "5.0 GT/s PCIe", /* 0x15 */ "8.0 GT/s PCIe", /* 0x16 */ + "16.0 GT/s PCIe", /* 0x17 */ }; static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf) diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c index e725f99b5479..d96626c614f5 100644 --- a/drivers/pci/syscall.c +++ b/drivers/pci/syscall.c @@ -1,11 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* - * pci_syscall.c - * - * For architectures where we want to allow direct access - * to the PCI config stuff - it would probably be preferable - * on PCs too, but there people just do it by hand with the - * magic northbridge registers.. + * For architectures where we want to allow direct access to the PCI config + * stuff - it would probably be preferable on PCs too, but there people + * just do it by hand with the magic northbridge registers. */ #include <linux/errno.h> diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c index 70fba57d6103..4b22885f4e9c 100644 --- a/drivers/pci/vpd.c +++ b/drivers/pci/vpd.c @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * File: vpd.c - * Purpose: Provide PCI VPD support + * PCI VPD support * * Copyright (C) 2010 Broadcom Corporation. */ diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index 8785014f656e..eba6e33147a2 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Xen PCI Frontend. + * Xen PCI Frontend * - * Author: Ryan Wilson <hap9@epoch.ncsc.mil> + * Author: Ryan Wilson <hap9@epoch.ncsc.mil> */ #include <linux/module.h> #include <linux/init.h> |