diff options
Diffstat (limited to 'drivers/phy/amlogic/phy-meson-gxl-usb2.c')
| -rw-r--r-- | drivers/phy/amlogic/phy-meson-gxl-usb2.c | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c new file mode 100644 index 000000000000..e90c4ee25dfe --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -0,0 +1,273 @@ +/* + * Meson GXL and GXM USB2 PHY driver + * + * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/usb/of.h> + +/* bits [31:27] are read-only */ +#define U2P_R0 0x0 + #define U2P_R0_BYPASS_SEL BIT(0) + #define U2P_R0_BYPASS_DM_EN BIT(1) + #define U2P_R0_BYPASS_DP_EN BIT(2) + #define U2P_R0_TXBITSTUFF_ENH BIT(3) + #define U2P_R0_TXBITSTUFF_EN BIT(4) + #define U2P_R0_DM_PULLDOWN BIT(5) + #define U2P_R0_DP_PULLDOWN BIT(6) + #define U2P_R0_DP_VBUS_VLD_EXT_SEL BIT(7) + #define U2P_R0_DP_VBUS_VLD_EXT BIT(8) + #define U2P_R0_ADP_PRB_EN BIT(9) + #define U2P_R0_ADP_DISCHARGE BIT(10) + #define U2P_R0_ADP_CHARGE BIT(11) + #define U2P_R0_DRV_VBUS BIT(12) + #define U2P_R0_ID_PULLUP BIT(13) + #define U2P_R0_LOOPBACK_EN_B BIT(14) + #define U2P_R0_OTG_DISABLE BIT(15) + #define U2P_R0_COMMON_ONN BIT(16) + #define U2P_R0_FSEL_MASK GENMASK(19, 17) + #define U2P_R0_REF_CLK_SEL_MASK GENMASK(21, 20) + #define U2P_R0_POWER_ON_RESET BIT(22) + #define U2P_R0_V_ATE_TEST_EN_B_MASK GENMASK(24, 23) + #define U2P_R0_ID_SET_ID_DQ BIT(25) + #define U2P_R0_ATE_RESET BIT(26) + #define U2P_R0_FSV_MINUS BIT(27) + #define U2P_R0_FSV_PLUS BIT(28) + #define U2P_R0_BYPASS_DM_DATA BIT(29) + #define U2P_R0_BYPASS_DP_DATA BIT(30) + +#define U2P_R1 0x4 + #define U2P_R1_BURN_IN_TEST BIT(0) + #define U2P_R1_ACA_ENABLE BIT(1) + #define U2P_R1_DCD_ENABLE BIT(2) + #define U2P_R1_VDAT_SRC_EN_B BIT(3) + #define U2P_R1_VDAT_DET_EN_B BIT(4) + #define U2P_R1_CHARGES_SEL BIT(5) + #define U2P_R1_TX_PREEMP_PULSE_TUNE BIT(6) + #define U2P_R1_TX_PREEMP_AMP_TUNE_MASK GENMASK(8, 7) + #define U2P_R1_TX_RES_TUNE_MASK GENMASK(10, 9) + #define U2P_R1_TX_RISE_TUNE_MASK GENMASK(12, 11) + #define U2P_R1_TX_VREF_TUNE_MASK GENMASK(16, 13) + #define U2P_R1_TX_FSLS_TUNE_MASK GENMASK(20, 17) + #define U2P_R1_TX_HSXV_TUNE_MASK GENMASK(22, 21) + #define U2P_R1_OTG_TUNE_MASK GENMASK(25, 23) + #define U2P_R1_SQRX_TUNE_MASK GENMASK(28, 26) + #define U2P_R1_COMP_DIS_TUNE_MASK GENMASK(31, 29) + +/* bits [31:14] are read-only */ +#define U2P_R2 0x8 + #define U2P_R2_DATA_IN_MASK GENMASK(3, 0) + #define U2P_R2_DATA_IN_EN_MASK GENMASK(7, 4) + #define U2P_R2_ADDR_MASK GENMASK(11, 8) + #define U2P_R2_DATA_OUT_SEL BIT(12) + #define U2P_R2_CLK BIT(13) + #define U2P_R2_DATA_OUT_MASK GENMASK(17, 14) + #define U2P_R2_ACA_PIN_RANGE_C BIT(18) + #define U2P_R2_ACA_PIN_RANGE_B BIT(19) + #define U2P_R2_ACA_PIN_RANGE_A BIT(20) + #define U2P_R2_ACA_PIN_GND BIT(21) + #define U2P_R2_ACA_PIN_FLOAT BIT(22) + #define U2P_R2_CHARGE_DETECT BIT(23) + #define U2P_R2_DEVICE_SESSION_VALID BIT(24) + #define U2P_R2_ADP_PROBE BIT(25) + #define U2P_R2_ADP_SENSE BIT(26) + #define U2P_R2_SESSION_END BIT(27) + #define U2P_R2_VBUS_VALID BIT(28) + #define U2P_R2_B_VALID BIT(29) + #define U2P_R2_A_VALID BIT(30) + #define U2P_R2_ID_DIG BIT(31) + +#define U2P_R3 0xc + +#define RESET_COMPLETE_TIME 500 + +struct phy_meson_gxl_usb2_priv { + struct regmap *regmap; + enum phy_mode mode; + int is_enabled; +}; + +static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = U2P_R3, +}; + +static int phy_meson_gxl_usb2_reset(struct phy *phy) +{ + struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); + + if (priv->is_enabled) { + /* reset the PHY and wait until settings are stabilized */ + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, + U2P_R0_POWER_ON_RESET); + udelay(RESET_COMPLETE_TIME); + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, + 0); + udelay(RESET_COMPLETE_TIME); + } + + return 0; +} + +static int phy_meson_gxl_usb2_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); + + switch (mode) { + case PHY_MODE_USB_HOST: + case PHY_MODE_USB_OTG: + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN, + U2P_R0_DM_PULLDOWN); + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN, + U2P_R0_DP_PULLDOWN); + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP, 0); + break; + + case PHY_MODE_USB_DEVICE: + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN, + 0); + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN, + 0); + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP, + U2P_R0_ID_PULLUP); + break; + + default: + return -EINVAL; + } + + phy_meson_gxl_usb2_reset(phy); + + priv->mode = mode; + + return 0; +} + +static int phy_meson_gxl_usb2_power_off(struct phy *phy) +{ + struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); + + priv->is_enabled = 0; + + /* power off the PHY by putting it into reset mode */ + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, + U2P_R0_POWER_ON_RESET); + + return 0; +} + +static int phy_meson_gxl_usb2_power_on(struct phy *phy) +{ + struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); + int ret; + + priv->is_enabled = 1; + + /* power on the PHY by taking it out of reset mode */ + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0); + + ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode); + if (ret) { + phy_meson_gxl_usb2_power_off(phy); + + dev_err(&phy->dev, "Failed to initialize PHY with mode %d\n", + priv->mode); + return ret; + } + + return 0; +} + +static const struct phy_ops phy_meson_gxl_usb2_ops = { + .power_on = phy_meson_gxl_usb2_power_on, + .power_off = phy_meson_gxl_usb2_power_off, + .set_mode = phy_meson_gxl_usb2_set_mode, + .reset = phy_meson_gxl_usb2_reset, + .owner = THIS_MODULE, +}; + +static int phy_meson_gxl_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct resource *res; + struct phy_meson_gxl_usb2_priv *priv; + struct phy *phy; + void __iomem *base; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + switch (of_usb_get_dr_mode_by_phy(dev->of_node, -1)) { + case USB_DR_MODE_PERIPHERAL: + priv->mode = PHY_MODE_USB_DEVICE; + break; + case USB_DR_MODE_OTG: + priv->mode = PHY_MODE_USB_OTG; + break; + case USB_DR_MODE_HOST: + default: + priv->mode = PHY_MODE_USB_HOST; + break; + } + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_meson_gxl_usb2_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id phy_meson_gxl_usb2_of_match[] = { + { .compatible = "amlogic,meson-gxl-usb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb2_of_match); + +static struct platform_driver phy_meson_gxl_usb2_driver = { + .probe = phy_meson_gxl_usb2_probe, + .driver = { + .name = "phy-meson-gxl-usb2", + .of_match_table = phy_meson_gxl_usb2_of_match, + }, +}; +module_platform_driver(phy_meson_gxl_usb2_driver); + +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); +MODULE_DESCRIPTION("Meson GXL and GXM USB2 PHY driver"); +MODULE_LICENSE("GPL v2"); |