diff options
Diffstat (limited to 'drivers/phy/broadcom/phy-bcm-sr-usb.c')
| -rw-r--r-- | drivers/phy/broadcom/phy-bcm-sr-usb.c | 57 |
1 files changed, 3 insertions, 54 deletions
diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c index fe6c58910e4c..77c025a0720c 100644 --- a/drivers/phy/broadcom/phy-bcm-sr-usb.c +++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c @@ -16,8 +16,6 @@ enum bcm_usb_phy_version { }; enum bcm_usb_phy_reg { - PLL_NDIV_FRAC, - PLL_NDIV_INT, PLL_CTRL, PHY_CTRL, PHY_PLL_CTRL, @@ -31,18 +29,11 @@ static const u8 bcm_usb_combo_phy_ss[] = { }; static const u8 bcm_usb_combo_phy_hs[] = { - [PLL_NDIV_FRAC] = 0x04, - [PLL_NDIV_INT] = 0x08, [PLL_CTRL] = 0x0c, [PHY_CTRL] = 0x10, }; -#define HSPLL_NDIV_INT_VAL 0x13 -#define HSPLL_NDIV_FRAC_VAL 0x1005 - static const u8 bcm_usb_hs_phy[] = { - [PLL_NDIV_FRAC] = 0x0, - [PLL_NDIV_INT] = 0x4, [PLL_CTRL] = 0x8, [PHY_CTRL] = 0xc, }; @@ -52,7 +43,6 @@ enum pll_ctrl_bits { SSPLL_SUSPEND_EN, PLL_SEQ_START, PLL_LOCK, - PLL_PDIV, }; static const u8 u3pll_ctrl[] = { @@ -66,29 +56,17 @@ static const u8 u3pll_ctrl[] = { #define HSPLL_PDIV_VAL 0x1 static const u8 u2pll_ctrl[] = { - [PLL_PDIV] = 1, [PLL_RESETB] = 5, [PLL_LOCK] = 6, }; enum bcm_usb_phy_ctrl_bits { CORERDY, - AFE_LDO_PWRDWNB, - AFE_PLL_PWRDWNB, - AFE_BG_PWRDWNB, - PHY_ISO, PHY_RESETB, PHY_PCTL, }; #define PHY_PCTL_MASK 0xffff -/* - * 0x0806 of PCTL_VAL has below bits set - * BIT-8 : refclk divider 1 - * BIT-3:2: device mode; mode is not effect - * BIT-1: soft reset active low - */ -#define HSPHY_PCTL_VAL 0x0806 #define SSPHY_PCTL_VAL 0x0006 static const u8 u3phy_ctrl[] = { @@ -98,10 +76,6 @@ static const u8 u3phy_ctrl[] = { static const u8 u2phy_ctrl[] = { [CORERDY] = 0, - [AFE_LDO_PWRDWNB] = 1, - [AFE_PLL_PWRDWNB] = 2, - [AFE_BG_PWRDWNB] = 3, - [PHY_ISO] = 4, [PHY_RESETB] = 5, [PHY_PCTL] = 6, }; @@ -186,38 +160,13 @@ static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg) int ret = 0; void __iomem *regs = phy_cfg->regs; const u8 *offset; - u32 rd_data; offset = phy_cfg->offset; - writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]); - writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]); - - rd_data = readl(regs + offset[PLL_CTRL]); - rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]); - rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]); - writel(rd_data, regs + offset[PLL_CTRL]); - - /* Set Core Ready high */ - bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], - BIT(u2phy_ctrl[CORERDY])); - - /* Maximum timeout for Core Ready done */ - msleep(30); - + bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL], + BIT(u2pll_ctrl[PLL_RESETB])); bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], BIT(u2pll_ctrl[PLL_RESETB])); - bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], - BIT(u2phy_ctrl[PHY_RESETB])); - - - rd_data = readl(regs + offset[PHY_CTRL]); - rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]); - rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]); - writel(rd_data, regs + offset[PHY_CTRL]); - - /* Maximum timeout for PLL reset done */ - msleep(30); ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], BIT(u2pll_ctrl[PLL_LOCK])); @@ -256,7 +205,7 @@ static int bcm_usb_phy_init(struct phy *phy) return ret; } -static struct phy_ops sr_phy_ops = { +static const struct phy_ops sr_phy_ops = { .init = bcm_usb_phy_init, .reset = bcm_usb_phy_reset, .owner = THIS_MODULE, |