diff options
Diffstat (limited to 'drivers/phy/phy-exynos4x12-usb2.c')
| -rw-r--r-- | drivers/phy/phy-exynos4x12-usb2.c | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/phy-exynos4x12-usb2.c index 63134d8bda08..0b9de88579b1 100644 --- a/drivers/phy/phy-exynos4x12-usb2.c +++ b/drivers/phy/phy-exynos4x12-usb2.c @@ -67,6 +67,8 @@ #define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0) #define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0) +#define EXYNOS_3250_UPHYCLK_REFCLKSEL (0x2 << 8) + #define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3) #define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4) #define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7) @@ -197,6 +199,10 @@ static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst) clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK); clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK; + + if (drv->cfg->has_refclk_sel) + clk = EXYNOS_3250_UPHYCLK_REFCLKSEL; + clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET; clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON; writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK); @@ -278,7 +284,7 @@ static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst) exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); } - if (inst->cfg->id == EXYNOS4x12_DEVICE) + if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, EXYNOS_4x12_MODE_SWITCH_MASK, EXYNOS_4x12_MODE_SWITCH_DEVICE); @@ -310,7 +316,7 @@ static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst) if (inst->ext_cnt-- > 1) return 0; - if (inst->cfg->id == EXYNOS4x12_DEVICE) + if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, EXYNOS_4x12_MODE_SWITCH_MASK, EXYNOS_4x12_MODE_SWITCH_HOST); @@ -358,6 +364,13 @@ static const struct samsung_usb2_common_phy exynos4x12_phys[] = { {}, }; +const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = { + .has_refclk_sel = 1, + .num_phys = 1, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; + const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { .has_mode_switch = 1, .num_phys = EXYNOS4x12_NUM_PHYS, |