diff options
Diffstat (limited to 'drivers/phy/phy-qcom-ufs-qmp-20nm.c')
| -rw-r--r-- | drivers/phy/phy-qcom-ufs-qmp-20nm.c | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c new file mode 100644 index 000000000000..8332f96b2c4a --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c @@ -0,0 +1,257 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "phy-qcom-ufs-qmp-20nm.h" + +#define UFS_PHY_NAME "ufs_phy_qmp_20nm" + +static +int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + bool is_rate_B) +{ + struct ufs_qcom_phy_calibration *tbl_A, *tbl_B; + int tbl_size_A, tbl_size_B; + u8 major = ufs_qcom_phy->host_ctrl_rev_major; + u16 minor = ufs_qcom_phy->host_ctrl_rev_minor; + u16 step = ufs_qcom_phy->host_ctrl_rev_step; + int err; + + if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) { + tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0); + tbl_A = phy_cal_table_rate_A_1_2_0; + } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) { + tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0); + tbl_A = phy_cal_table_rate_A_1_3_0; + } else { + dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n", + __func__); + err = -ENODEV; + goto out; + } + + tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); + tbl_B = phy_cal_table_rate_B; + + err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A, + tbl_B, tbl_size_B, is_rate_B); + + if (err) + dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n", + __func__, err); + +out: + return err; +} + +static +void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common) +{ + phy_common->quirks = + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; +} + +static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy) +{ + struct ufs_qcom_phy_qmp_20nm *phy = phy_get_drvdata(generic_phy); + struct ufs_qcom_phy *phy_common = &phy->common_cfg; + int err = 0; + + err = ufs_qcom_phy_init_clks(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n", + __func__, err); + goto out; + } + + err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n", + __func__, err); + goto out; + } + + ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common); + +out: + return err; +} + +static +void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val) +{ + bool hibern8_exit_after_pwr_collapse = phy->quirks & + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; + + if (val) { + writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); + /* + * Before any transactions involving PHY, ensure PHY knows + * that it's analog rail is powered ON. + */ + mb(); + + if (hibern8_exit_after_pwr_collapse) { + /* + * Give atleast 1us delay after restoring PHY analog + * power. + */ + usleep_range(1, 2); + writel_relaxed(0x0A, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + writel_relaxed(0x08, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + /* + * Make sure workaround is deactivated before proceeding + * with normal PHY operations. + */ + mb(); + } + } else { + if (hibern8_exit_after_pwr_collapse) { + writel_relaxed(0x0A, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + writel_relaxed(0x02, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + /* + * Make sure that above workaround is activated before + * PHY analog power collapse. + */ + mb(); + } + + writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); + /* + * ensure that PHY knows its PHY analog rail is going + * to be powered down + */ + mb(); + } +} + +static +void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) +{ + writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK, + phy->mmio + UFS_PHY_TX_LANE_ENABLE); + mb(); +} + +static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy) +{ + u32 tmp; + + tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); + tmp &= ~MASK_SERDES_START; + tmp |= (1 << OFFSET_SERDES_START); + writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); + mb(); +} + +static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) +{ + int err = 0; + u32 val; + + err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, + val, (val & MASK_PCS_READY), 10, 1000000); + if (err) + dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", + __func__, err); + return err; +} + +static struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { + .init = ufs_qcom_phy_qmp_20nm_init, + .exit = ufs_qcom_phy_exit, + .power_on = ufs_qcom_phy_power_on, + .power_off = ufs_qcom_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct ufs_qcom_phy_specific_ops phy_20nm_ops = { + .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate, + .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes, + .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready, + .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable, + .power_control = ufs_qcom_phy_qmp_20nm_power_control, +}; + +static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct ufs_qcom_phy_qmp_20nm *phy; + int err = 0; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(dev, "%s: failed to allocate phy\n", __func__); + err = -ENOMEM; + goto out; + } + + generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg, + &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops); + + if (!generic_phy) { + dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n", + __func__); + err = -EIO; + goto out; + } + + phy_set_drvdata(generic_phy, phy); + + strlcpy(phy->common_cfg.name, UFS_PHY_NAME, + sizeof(phy->common_cfg.name)); + +out: + return err; +} + +static int ufs_qcom_phy_qmp_20nm_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy = to_phy(dev); + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int err = 0; + + err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy); + if (err) + dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n", + __func__, err); + + return err; +} + +static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = { + {.compatible = "qcom,ufs-phy-qmp-20nm"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match); + +static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = { + .probe = ufs_qcom_phy_qmp_20nm_probe, + .remove = ufs_qcom_phy_qmp_20nm_remove, + .driver = { + .of_match_table = ufs_qcom_phy_qmp_20nm_of_match, + .name = "ufs_qcom_phy_qmp_20nm", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ufs_qcom_phy_qmp_20nm_driver); + +MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm"); +MODULE_LICENSE("GPL v2"); |