diff options
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/phy-omap-usb2.c | 92 |
1 files changed, 75 insertions, 17 deletions
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index c79633efd7fc..c134989052f5 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -29,6 +29,8 @@ #include <linux/delay.h> #include <linux/phy/omap_control_phy.h> #include <linux/phy/phy.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <linux/of_platform.h> #define USB2PHY_DISCON_BYP_LATCH (1 << 31) @@ -97,22 +99,38 @@ static int omap_usb_set_peripheral(struct usb_otg *otg, return 0; } +static int omap_usb_phy_power(struct omap_usb *phy, int on) +{ + u32 val; + int ret; + + if (!phy->syscon_phy_power) { + omap_control_phy_power(phy->control_dev, on); + return 0; + } + + if (on) + val = phy->power_on; + else + val = phy->power_off; + + ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg, + phy->mask, val); + return ret; +} + static int omap_usb_power_off(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_phy_power(phy->control_dev, 0); - - return 0; + return omap_usb_phy_power(phy, false); } static int omap_usb_power_on(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_phy_power(phy->control_dev, 1); - - return 0; + return omap_usb_phy_power(phy, true); } static int omap_usb_init(struct phy *x) @@ -147,21 +165,38 @@ static const struct phy_ops ops = { static const struct usb_phy_data omap_usb2_data = { .label = "omap_usb2", .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, }; static const struct usb_phy_data omap5_usb2_data = { .label = "omap5_usb2", .flags = 0, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, }; static const struct usb_phy_data dra7x_usb2_data = { .label = "dra7x_usb2", .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, +}; + +static const struct usb_phy_data dra7x_usb2_phy2_data = { + .label = "dra7x_usb2_phy2", + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .mask = OMAP_USB2_PHY_PD, + .power_off = OMAP_USB2_PHY_PD, }; static const struct usb_phy_data am437x_usb2_data = { .label = "am437x_usb2", .flags = 0, + .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD | + AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, + .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, + .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD, }; static const struct of_device_id omap_usb2_id_table[] = { @@ -178,6 +213,10 @@ static const struct of_device_id omap_usb2_id_table[] = { .data = &dra7x_usb2_data, }, { + .compatible = "ti,dra7x-usb2-phy2", + .data = &dra7x_usb2_phy2_data, + }, + { .compatible = "ti,am437x-usb2", .data = &am437x_usb2_data, }, @@ -219,6 +258,9 @@ static int omap_usb2_probe(struct platform_device *pdev) phy->phy.label = phy_data->label; phy->phy.otg = otg; phy->phy.type = USB_PHY_TYPE_USB2; + phy->mask = phy_data->mask; + phy->power_on = phy_data->power_on; + phy->power_off = phy_data->power_off; if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -228,20 +270,36 @@ static int omap_usb2_probe(struct platform_device *pdev) phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; } - control_node = of_parse_phandle(node, "ctrl-module", 0); - if (!control_node) { - dev_err(&pdev->dev, "Failed to get control device phandle\n"); - return -EINVAL; - } + phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node, + "syscon-phy-power"); + if (IS_ERR(phy->syscon_phy_power)) { + dev_dbg(&pdev->dev, + "can't get syscon-phy-power, using control device\n"); + phy->syscon_phy_power = NULL; + + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(&pdev->dev, + "Failed to get control device phandle\n"); + return -EINVAL; + } - control_pdev = of_find_device_by_node(control_node); - if (!control_pdev) { - dev_err(&pdev->dev, "Failed to get control device\n"); - return -EINVAL; + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + return -EINVAL; + } + phy->control_dev = &control_pdev->dev; + } else { + if (of_property_read_u32_index(node, + "syscon-phy-power", 1, + &phy->power_reg)) { + dev_err(&pdev->dev, + "couldn't get power reg. offset\n"); + return -EINVAL; + } } - phy->control_dev = &control_pdev->dev; - otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS) |