diff options
Diffstat (limited to 'drivers/power/reset')
-rw-r--r-- | drivers/power/reset/Kconfig | 10 | ||||
-rw-r--r-- | drivers/power/reset/Makefile | 1 | ||||
-rw-r--r-- | drivers/power/reset/brcm-kona-reset.c | 73 |
3 files changed, 84 insertions, 0 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 7053abced0bc..3bfac539334b 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -46,6 +46,16 @@ config POWER_RESET_AXXIA Say Y if you have an Axxia family SoC. +config POWER_RESET_BRCMKONA + bool "Broadcom Kona reset driver" + depends on ARM || COMPILE_TEST + default ARCH_BCM_MOBILE + help + This driver provides restart support for Broadcom Kona chips. + + Say Y here if you have a Broadcom Kona-based board and you wish + to have restart support. + config POWER_RESET_BRCMSTB bool "Broadcom STB reset driver" depends on ARM || MIPS || COMPILE_TEST diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index d6b2560d5c4a..1be307c7fc25 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o +obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o diff --git a/drivers/power/reset/brcm-kona-reset.c b/drivers/power/reset/brcm-kona-reset.c new file mode 100644 index 000000000000..8eaa959d8be6 --- /dev/null +++ b/drivers/power/reset/brcm-kona-reset.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2016 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/reboot.h> + +#define RSTMGR_REG_WR_ACCESS_OFFSET 0 +#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4 + +#define RSTMGR_WR_PASSWORD 0xa5a5 +#define RSTMGR_WR_PASSWORD_SHIFT 8 +#define RSTMGR_WR_ACCESS_ENABLE 1 + +static void __iomem *kona_reset_base; + +static int kona_reset_handler(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + /* + * A soft reset is triggered by writing a 0 to bit 0 of the soft reset + * register. To write to that register we must first write the password + * and the enable bit in the write access enable register. + */ + writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) | + RSTMGR_WR_ACCESS_ENABLE, + kona_reset_base + RSTMGR_REG_WR_ACCESS_OFFSET); + writel(0, kona_reset_base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET); + + return NOTIFY_DONE; +} + +static struct notifier_block kona_reset_nb = { + .notifier_call = kona_reset_handler, + .priority = 128, +}; + +static int kona_reset_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + kona_reset_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kona_reset_base)) + return PTR_ERR(kona_reset_base); + + return register_restart_handler(&kona_reset_nb); +} + +static const struct of_device_id of_match[] = { + { .compatible = "brcm,bcm21664-resetmgr" }, + {}, +}; + +static struct platform_driver bcm_kona_reset_driver = { + .probe = kona_reset_probe, + .driver = { + .name = "brcm-kona-reset", + .of_match_table = of_match, + }, +}; + +builtin_platform_driver(bcm_kona_reset_driver); |