diff options
Diffstat (limited to 'drivers/power')
26 files changed, 3468 insertions, 1440 deletions
diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c index d49579b227ec..63c57dc82ac1 100644 --- a/drivers/power/88pm860x_battery.c +++ b/drivers/power/88pm860x_battery.c @@ -954,47 +954,33 @@ static int pm860x_battery_probe(struct platform_device *pdev) else info->resistor = 300; /* set default internal resistor */ - info->battery = power_supply_register(&pdev->dev, &pm860x_battery_desc, - NULL); + info->battery = devm_power_supply_register(&pdev->dev, + &pm860x_battery_desc, + NULL); if (IS_ERR(info->battery)) return PTR_ERR(info->battery); info->battery->dev.parent = &pdev->dev; - ret = request_threaded_irq(info->irq_cc, NULL, - pm860x_coulomb_handler, IRQF_ONESHOT, - "coulomb", info); + ret = devm_request_threaded_irq(chip->dev, info->irq_cc, NULL, + pm860x_coulomb_handler, IRQF_ONESHOT, + "coulomb", info); if (ret < 0) { dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", info->irq_cc, ret); - goto out_reg; + return ret; } - ret = request_threaded_irq(info->irq_batt, NULL, pm860x_batt_handler, - IRQF_ONESHOT, "battery", info); + ret = devm_request_threaded_irq(chip->dev, info->irq_batt, NULL, + pm860x_batt_handler, + IRQF_ONESHOT, "battery", info); if (ret < 0) { dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", info->irq_batt, ret); - goto out_coulomb; + return ret; } return 0; - -out_coulomb: - free_irq(info->irq_cc, info); -out_reg: - power_supply_unregister(info->battery); - return ret; -} - -static int pm860x_battery_remove(struct platform_device *pdev) -{ - struct pm860x_battery_info *info = platform_get_drvdata(pdev); - - free_irq(info->irq_batt, info); - free_irq(info->irq_cc, info); - power_supply_unregister(info->battery); - return 0; } #ifdef CONFIG_PM_SLEEP @@ -1028,7 +1014,6 @@ static struct platform_driver pm860x_battery_driver = { .pm = &pm860x_battery_pm_ops, }, .probe = pm860x_battery_probe, - .remove = pm860x_battery_remove, }; module_platform_driver(pm860x_battery_driver); diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 8d53f58f20dd..237d7aa73e8c 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -157,26 +157,25 @@ config BATTERY_SBS Say Y to include support for SBS battery driver for SBS-compliant gas gauges. -config BATTERY_BQ27x00 - tristate "BQ27x00 battery driver" - depends on I2C || I2C=n +config BATTERY_BQ27XXX + tristate "BQ27xxx battery driver" help - Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. + Say Y here to enable support for batteries with BQ27xxx (I2C/HDQ) chips. -config BATTERY_BQ27X00_I2C - bool "BQ27200/BQ27500 support" - depends on BATTERY_BQ27x00 +config BATTERY_BQ27XXX_I2C + bool "BQ27xxx I2C support" + depends on BATTERY_BQ27XXX depends on I2C default y help - Say Y here to enable support for batteries with BQ27x00 (I2C) chips. + Say Y here to enable support for batteries with BQ27xxx (I2C) chips. -config BATTERY_BQ27X00_PLATFORM - bool "BQ27000 support" - depends on BATTERY_BQ27x00 +config BATTERY_BQ27XXX_PLATFORM + bool "BQ27xxx HDQ support" + depends on BATTERY_BQ27XXX default y help - Say Y here to enable support for batteries with BQ27000 (HDQ) chips. + Say Y here to enable support for batteries with BQ27xxx (HDQ) chips. config BATTERY_DA9030 tristate "DA9030 battery driver" @@ -323,7 +322,7 @@ config CHARGER_MAX8903 config CHARGER_TWL4030 tristate "OMAP TWL4030 BCI charger driver" - depends on TWL4030_CORE + depends on IIO && TWL4030_CORE help Say Y here to enable support for TWL4030 Battery Charge Interface. @@ -389,6 +388,18 @@ config CHARGER_MAX8998 Say Y to enable support for the battery charger control sysfs and platform data of MAX8998/LP3974 PMICs. +config CHARGER_QCOM_SMBB + tristate "Qualcomm Switch-Mode Battery Charger and Boost" + depends on MFD_SPMI_PMIC || COMPILE_TEST + depends on OF + help + Say Y to include support for the Switch-Mode Battery Charger and + Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger + is an integrated, single-cell lithium-ion battery charger. DT + configuration is required for loading, see the devicetree + documentation for more detail. The base name for this driver is + 'pm8941_charger'. + config CHARGER_BQ2415X tristate "TI BQ2415x battery charger driver" depends on I2C @@ -407,12 +418,13 @@ config CHARGER_BQ24190 Say Y to enable support for the TI BQ24190 battery charger. config CHARGER_BQ24257 - tristate "TI BQ24257 battery charger driver" + tristate "TI BQ24250/24251/24257 battery charger driver" depends on I2C depends on GPIOLIB || COMPILE_TEST depends on REGMAP_I2C help - Say Y to enable support for the TI BQ24257 battery charger. + Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery + chargers. config CHARGER_BQ24735 tristate "TI BQ24735 battery charger support" @@ -444,6 +456,13 @@ config CHARGER_TPS65090 Say Y here to enable support for battery charging with TPS65090 PMIC chips. +config CHARGER_TPS65217 + tristate "TPS65217 battery charger driver" + depends on MFD_TPS65217 + help + Say Y here to enable support for battery charging with TPS65217 + PMIC chips. + config BATTERY_GAUGE_LTC2941 tristate "LTC2941/LTC2943 Battery Gauge Driver" depends on I2C @@ -482,6 +501,13 @@ config CHARGER_RT9455 help Say Y to enable support for Richtek RT9455 battery charger. +config AXP20X_POWER + tristate "AXP20x power supply driver" + depends on MFD_AXP20X + help + This driver provides support for the power supply features of + AXP20x PMIC. + source "drivers/power/reset/Kconfig" endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index cbdf89d595a3..b656638f8b39 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o obj-$(CONFIG_PDA_POWER) += pda_power.o obj-$(CONFIG_APM_POWER) += apm_power.o +obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o obj-$(CONFIG_MAX8925_POWER) += max8925_power.o obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o obj-$(CONFIG_WM831X_POWER) += wm831x_power.o @@ -29,7 +30,7 @@ obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o -obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o +obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o obj-$(CONFIG_CHARGER_DA9150) += da9150-charger.o @@ -58,6 +59,7 @@ obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o +obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o @@ -66,6 +68,7 @@ obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o +obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o obj-$(CONFIG_POWER_RESET) += reset/ obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o diff --git a/drivers/power/avs/rockchip-io-domain.c b/drivers/power/avs/rockchip-io-domain.c index 2e300028f0f7..80994566a1c8 100644 --- a/drivers/power/avs/rockchip-io-domain.c +++ b/drivers/power/avs/rockchip-io-domain.c @@ -271,6 +271,7 @@ static const struct of_device_id rockchip_iodomain_match[] = { }, { /* sentinel */ }, }; +MODULE_DEVICE_TABLE(of, rockchip_iodomain_match); static int rockchip_iodomain_probe(struct platform_device *pdev) { diff --git a/drivers/power/axp20x_usb_power.c b/drivers/power/axp20x_usb_power.c new file mode 100644 index 000000000000..421a90b83567 --- /dev/null +++ b/drivers/power/axp20x_usb_power.c @@ -0,0 +1,248 @@ +/* + * AXP20x PMIC USB power supply status driver + * + * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> + * Copyright (C) 2014 Bruno Prémont <bonbons@linux-vserver.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/axp20x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define DRVNAME "axp20x-usb-power-supply" + +#define AXP20X_PWR_STATUS_VBUS_PRESENT BIT(5) +#define AXP20X_PWR_STATUS_VBUS_USED BIT(4) + +#define AXP20X_USB_STATUS_VBUS_VALID BIT(2) + +#define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000) +#define AXP20X_VBUS_CLIMIT_MASK 3 +#define AXP20X_VBUC_CLIMIT_900mA 0 +#define AXP20X_VBUC_CLIMIT_500mA 1 +#define AXP20X_VBUC_CLIMIT_100mA 2 +#define AXP20X_VBUC_CLIMIT_NONE 3 + +#define AXP20X_ADC_EN1_VBUS_CURR BIT(2) +#define AXP20X_ADC_EN1_VBUS_VOLT BIT(3) + +#define AXP20X_VBUS_MON_VBUS_VALID BIT(3) + +struct axp20x_usb_power { + struct regmap *regmap; + struct power_supply *supply; +}; + +static irqreturn_t axp20x_usb_power_irq(int irq, void *devid) +{ + struct axp20x_usb_power *power = devid; + + power_supply_changed(power->supply); + + return IRQ_HANDLED; +} + +static int axp20x_usb_power_get_property(struct power_supply *psy, + enum power_supply_property psp, union power_supply_propval *val) +{ + struct axp20x_usb_power *power = power_supply_get_drvdata(psy); + unsigned int input, v; + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v); + if (ret) + return ret; + + val->intval = AXP20X_VBUS_VHOLD_uV(v); + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = axp20x_read_variable_width(power->regmap, + AXP20X_VBUS_V_ADC_H, 12); + if (ret < 0) + return ret; + + val->intval = ret * 1700; /* 1 step = 1.7 mV */ + return 0; + case POWER_SUPPLY_PROP_CURRENT_MAX: + ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v); + if (ret) + return ret; + + switch (v & AXP20X_VBUS_CLIMIT_MASK) { + case AXP20X_VBUC_CLIMIT_100mA: + val->intval = 100000; + break; + case AXP20X_VBUC_CLIMIT_500mA: + val->intval = 500000; + break; + case AXP20X_VBUC_CLIMIT_900mA: + val->intval = 900000; + break; + case AXP20X_VBUC_CLIMIT_NONE: + val->intval = -1; + break; + } + return 0; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = axp20x_read_variable_width(power->regmap, + AXP20X_VBUS_I_ADC_H, 12); + if (ret < 0) + return ret; + + val->intval = ret * 375; /* 1 step = 0.375 mA */ + return 0; + default: + break; + } + + /* All the properties below need the input-status reg value */ + ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input); + if (ret) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (!(input & AXP20X_PWR_STATUS_VBUS_PRESENT)) { + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; + break; + } + + ret = regmap_read(power->regmap, AXP20X_USB_OTG_STATUS, &v); + if (ret) + return ret; + + if (!(v & AXP20X_USB_STATUS_VBUS_VALID)) { + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + } + + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT); + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_USED); + break; + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property axp20x_usb_power_properties[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static const struct power_supply_desc axp20x_usb_power_desc = { + .name = "axp20x-usb", + .type = POWER_SUPPLY_TYPE_USB, + .properties = axp20x_usb_power_properties, + .num_properties = ARRAY_SIZE(axp20x_usb_power_properties), + .get_property = axp20x_usb_power_get_property, +}; + +static int axp20x_usb_power_probe(struct platform_device *pdev) +{ + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + struct power_supply_config psy_cfg = {}; + struct axp20x_usb_power *power; + static const char * const irq_names[] = { "VBUS_PLUGIN", + "VBUS_REMOVAL", "VBUS_VALID", "VBUS_NOT_VALID" }; + int i, irq, ret; + + if (!of_device_is_available(pdev->dev.of_node)) + return -ENODEV; + + if (!axp20x) { + dev_err(&pdev->dev, "Parent drvdata not set\n"); + return -EINVAL; + } + + power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL); + if (!power) + return -ENOMEM; + + power->regmap = axp20x->regmap; + + /* Enable vbus valid checking */ + ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON, + AXP20X_VBUS_MON_VBUS_VALID, AXP20X_VBUS_MON_VBUS_VALID); + if (ret) + return ret; + + /* Enable vbus voltage and current measurement */ + ret = regmap_update_bits(power->regmap, AXP20X_ADC_EN1, + AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT, + AXP20X_ADC_EN1_VBUS_CURR | AXP20X_ADC_EN1_VBUS_VOLT); + if (ret) + return ret; + + psy_cfg.of_node = pdev->dev.of_node; + psy_cfg.drv_data = power; + + power->supply = devm_power_supply_register(&pdev->dev, + &axp20x_usb_power_desc, &psy_cfg); + if (IS_ERR(power->supply)) + return PTR_ERR(power->supply); + + /* Request irqs after registering, as irqs may trigger immediately */ + for (i = 0; i < ARRAY_SIZE(irq_names); i++) { + irq = platform_get_irq_byname(pdev, irq_names[i]); + if (irq < 0) { + dev_warn(&pdev->dev, "No IRQ for %s: %d\n", + irq_names[i], irq); + continue; + } + irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq); + ret = devm_request_any_context_irq(&pdev->dev, irq, + axp20x_usb_power_irq, 0, DRVNAME, power); + if (ret < 0) + dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n", + irq_names[i], ret); + } + + return 0; +} + +static const struct of_device_id axp20x_usb_power_match[] = { + { .compatible = "x-powers,axp202-usb-power-supply" }, + { } +}; +MODULE_DEVICE_TABLE(of, axp20x_usb_power_match); + +static struct platform_driver axp20x_usb_power_driver = { + .probe = axp20x_usb_power_probe, + .driver = { + .name = DRVNAME, + .of_match_table = axp20x_usb_power_match, + }, +}; + +module_platform_driver(axp20x_usb_power_driver); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("AXP20x PMIC USB power supply status driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c index ec212b5be755..4afd76848bce 100644 --- a/drivers/power/bq2415x_charger.c +++ b/drivers/power/bq2415x_charger.c @@ -1704,7 +1704,7 @@ error_4: error_3: bq2415x_power_supply_exit(bq); error_2: - if (bq->notify_node) + if (bq && bq->notify_node) of_node_put(bq->notify_node); kfree(name); error_1: diff --git a/drivers/power/bq24190_charger.c b/drivers/power/bq24190_charger.c index 469a452cbe10..f5746b9f4e83 100644 --- a/drivers/power/bq24190_charger.c +++ b/drivers/power/bq24190_charger.c @@ -1543,5 +1543,4 @@ module_i2c_driver(bq24190_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>"); -MODULE_ALIAS("i2c:bq24190-charger"); MODULE_DESCRIPTION("TI BQ24190 Charger Driver"); diff --git a/drivers/power/bq24257_charger.c b/drivers/power/bq24257_charger.c index 5859bc7c1616..1fea2c7ef97f 100644 --- a/drivers/power/bq24257_charger.c +++ b/drivers/power/bq24257_charger.c @@ -13,6 +13,10 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * + * Datasheets: + * http://www.ti.com/product/bq24250 + * http://www.ti.com/product/bq24251 + * http://www.ti.com/product/bq24257 */ #include <linux/module.h> @@ -36,18 +40,33 @@ #define BQ24257_REG_7 0x06 #define BQ24257_MANUFACTURER "Texas Instruments" -#define BQ24257_STAT_IRQ "stat" #define BQ24257_PG_GPIO "pg" #define BQ24257_ILIM_SET_DELAY 1000 /* msec */ +/* + * When adding support for new devices make sure that enum bq2425x_chip and + * bq2425x_chip_name[] always stay in sync! + */ +enum bq2425x_chip { + BQ24250, + BQ24251, + BQ24257, +}; + +static const char *const bq2425x_chip_name[] = { + "bq24250", + "bq24251", + "bq24257", +}; + enum bq24257_fields { F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT, /* REG 1 */ F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE, /* REG 2 */ F_VBAT, F_USB_DET, /* REG 3 */ F_ICHG, F_ITERM, /* REG 4 */ F_LOOP_STATUS, F_LOW_CHG, F_DPDM_EN, F_CE_STATUS, F_VINDPM, /* REG 5 */ - F_X2_TMR_EN, F_TMR, F_SYSOFF, F_TS_STAT, /* REG 6 */ + F_X2_TMR_EN, F_TMR, F_SYSOFF, F_TS_EN, F_TS_STAT, /* REG 6 */ F_VOVP, F_CLR_VDP, F_FORCE_BATDET, F_FORCE_PTM, /* REG 7 */ F_MAX_FIELDS @@ -58,6 +77,9 @@ struct bq24257_init_data { u8 ichg; /* charge current */ u8 vbat; /* regulation voltage */ u8 iterm; /* termination current */ + u8 iilimit; /* input current limit */ + u8 vovp; /* over voltage protection voltage */ + u8 vindpm; /* VDMP input threshold voltage */ }; struct bq24257_state { @@ -71,6 +93,8 @@ struct bq24257_device { struct device *dev; struct power_supply *charger; + enum bq2425x_chip chip; + struct regmap *rmap; struct regmap_field *rmap_fields[F_MAX_FIELDS]; @@ -82,6 +106,8 @@ struct bq24257_device { struct bq24257_state state; struct mutex lock; /* protect state data */ + + bool iilimit_autoset_enable; }; static bool bq24257_is_volatile_reg(struct device *dev, unsigned int reg) @@ -135,6 +161,7 @@ static const struct reg_field bq24257_reg_fields[] = { [F_X2_TMR_EN] = REG_FIELD(BQ24257_REG_6, 7, 7), [F_TMR] = REG_FIELD(BQ24257_REG_6, 5, 6), [F_SYSOFF] = REG_FIELD(BQ24257_REG_6, 4, 4), + [F_TS_EN] = REG_FIELD(BQ24257_REG_6, 3, 3), [F_TS_STAT] = REG_FIELD(BQ24257_REG_6, 0, 2), /* REG 7 */ [F_VOVP] = REG_FIELD(BQ24257_REG_7, 5, 7), @@ -169,6 +196,26 @@ static const u32 bq24257_iterm_map[] = { #define BQ24257_ITERM_MAP_SIZE ARRAY_SIZE(bq24257_iterm_map) +static const u32 bq24257_iilimit_map[] = { + 100000, 150000, 500000, 900000, 1500000, 2000000 +}; + +#define BQ24257_IILIMIT_MAP_SIZE ARRAY_SIZE(bq24257_iilimit_map) + +static const u32 bq24257_vovp_map[] = { + 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000, + 10500000 +}; + +#define BQ24257_VOVP_MAP_SIZE ARRAY_SIZE(bq24257_vovp_map) + +static const u32 bq24257_vindpm_map[] = { + 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000, + 4760000 +}; + +#define BQ24257_VINDPM_MAP_SIZE ARRAY_SIZE(bq24257_vindpm_map) + static int bq24257_field_read(struct bq24257_device *bq, enum bq24257_fields field_id) { @@ -220,6 +267,47 @@ enum bq24257_fault { FAULT_INPUT_LDO_LOW, }; +static int bq24257_get_input_current_limit(struct bq24257_device *bq, + union power_supply_propval *val) +{ + int ret; + + ret = bq24257_field_read(bq, F_IILIMIT); + if (ret < 0) + return ret; + + /* + * The "External ILIM" and "Production & Test" modes are not exposed + * through this driver and not being covered by the lookup table. + * Should such a mode have become active let's return an error rather + * than exceeding the bounds of the lookup table and returning + * garbage. + */ + if (ret >= BQ24257_IILIMIT_MAP_SIZE) + return -ENODATA; + + val->intval = bq24257_iilimit_map[ret]; + + return 0; +} + +static int bq24257_set_input_current_limit(struct bq24257_device *bq, + const union power_supply_propval *val) +{ + /* + * Address the case where the user manually sets an input current limit + * while the charger auto-detection mechanism is is active. In this + * case we want to abort and go straight to the user-specified value. + */ + if (bq->iilimit_autoset_enable) + cancel_delayed_work_sync(&bq->iilimit_setup_work); + + return bq24257_field_write(bq, F_IILIMIT, + bq24257_find_idx(val->intval, + bq24257_iilimit_map, + BQ24257_IILIMIT_MAP_SIZE)); +} + static int bq24257_power_supply_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -249,6 +337,10 @@ static int bq24257_power_supply_get_property(struct power_supply *psy, val->strval = BQ24257_MANUFACTURER; break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = bq2425x_chip_name[bq->chip]; + break; + case POWER_SUPPLY_PROP_ONLINE: val->intval = state.power_good; break; @@ -300,6 +392,9 @@ static int bq24257_power_supply_get_property(struct power_supply *psy, val->intval = bq24257_iterm_map[bq->init_data.iterm]; break; + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + return bq24257_get_input_current_limit(bq, val); + default: return -EINVAL; } @@ -307,6 +402,31 @@ static int bq24257_power_supply_get_property(struct power_supply *psy, return 0; } +static int bq24257_power_supply_set_property(struct power_supply *psy, + enum power_supply_property prop, + const union power_supply_propval *val) +{ + struct bq24257_device *bq = power_supply_get_drvdata(psy); + + switch (prop) { + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + return bq24257_set_input_current_limit(bq, val); + default: + return -EINVAL; + } +} + +static int bq24257_power_supply_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + return true; + default: + return false; + } +} + static int bq24257_get_chip_state(struct bq24257_device *bq, struct bq24257_state *state) { @@ -324,7 +444,26 @@ static int bq24257_get_chip_state(struct bq24257_device *bq, state->fault = ret; - state->power_good = !gpiod_get_value_cansleep(bq->pg); + if (bq->pg) + state->power_good = !gpiod_get_value_cansleep(bq->pg); + else + /* + * If we have a chip without a dedicated power-good GPIO or + * some other explicit bit that would provide this information + * assume the power is good if there is no supply related + * fault - and not good otherwise. There is a possibility for + * other errors to mask that power in fact is not good but this + * is probably the best we can do here. + */ + switch (state->fault) { + case FAULT_INPUT_OVP: + case FAULT_INPUT_UVLO: + case FAULT_INPUT_LDO_LOW: + state->power_good = false; + break; + default: + state->power_good = true; + } return 0; } @@ -361,6 +500,28 @@ enum bq24257_in_ilimit { IILIMIT_NONE, }; +enum bq24257_vovp { + VOVP_6000, + VOVP_6500, + VOVP_7000, + VOVP_8000, + VOVP_9000, + VOVP_9500, + VOVP_10000, + VOVP_10500 +}; + +enum bq24257_vindpm { + VINDPM_4200, + VINDPM_4280, + VINDPM_4360, + VINDPM_4440, + VINDPM_4520, + VINDPM_4600, + VINDPM_4680, + VINDPM_4760 +}; + enum bq24257_port_type { PORT_TYPE_DCP, /* Dedicated Charging Port */ PORT_TYPE_CDP, /* Charging Downstream Port */ @@ -449,41 +610,43 @@ static void bq24257_handle_state_change(struct bq24257_device *bq, { int ret; struct bq24257_state old_state; - bool reset_iilimit = false; - bool config_iilimit = false; mutex_lock(&bq->lock); old_state = bq->state; mutex_unlock(&bq->lock); - if (!new_state->power_good) { /* power removed */ - cancel_delayed_work_sync(&bq->iilimit_setup_work); - - /* activate D+/D- port detection algorithm */ - ret = bq24257_field_write(bq, F_DPDM_EN, 1); + /* + * Handle BQ2425x state changes observing whether the D+/D- based input + * current limit autoset functionality is enabled. + */ + if (!new_state->power_good) { + dev_dbg(bq->dev, "Power removed\n"); + if (bq->iilimit_autoset_enable) { + cancel_delayed_work_sync(&bq->iilimit_setup_work); + + /* activate D+/D- port detection algorithm */ + ret = bq24257_field_write(bq, F_DPDM_EN, 1); + if (ret < 0) + goto error; + } + /* + * When power is removed always return to the default input + * current limit as configured during probe. + */ + ret = bq24257_field_write(bq, F_IILIMIT, bq->init_data.iilimit); if (ret < 0) goto error; + } else if (!old_state.power_good) { + dev_dbg(bq->dev, "Power inserted\n"); - reset_iilimit = true; - } else if (!old_state.power_good) { /* power inserted */ - config_iilimit = true; - } else if (new_state->fault == FAULT_NO_BAT) { /* battery removed */ - cancel_delayed_work_sync(&bq->iilimit_setup_work); - - reset_iilimit = true; - } else if (old_state.fault == FAULT_NO_BAT) { /* battery connected */ - config_iilimit = true; - } else if (new_state->fault == FAULT_TIMER) { /* safety timer expired */ - dev_err(bq->dev, "Safety timer expired! Battery dead?\n"); - } - - if (reset_iilimit) { - ret = bq24257_field_write(bq, F_IILIMIT, IILIMIT_500); - if (ret < 0) - goto error; - } else if (config_iilimit) { - schedule_delayed_work(&bq->iilimit_setup_work, + if (bq->iilimit_autoset_enable) + /* configure input current limit */ + schedule_delayed_work(&bq->iilimit_setup_work, msecs_to_jiffies(BQ24257_ILIM_SET_DELAY)); + } else if (new_state->fault == FAULT_NO_BAT) { + dev_warn(bq->dev, "Battery removed\n"); + } else if (new_state->fault == FAULT_TIMER) { + dev_err(bq->dev, "Safety timer expired! Battery dead?\n"); } return; @@ -531,7 +694,9 @@ static int bq24257_hw_init(struct bq24257_device *bq) } init_data[] = { {F_ICHG, bq->init_data.ichg}, {F_VBAT, bq->init_data.vbat}, - {F_ITERM, bq->init_data.iterm} + {F_ITERM, bq->init_data.iterm}, + {F_VOVP, bq->init_data.vovp}, + {F_VINDPM, bq->init_data.vindpm}, }; /* @@ -558,7 +723,16 @@ static int bq24257_hw_init(struct bq24257_device *bq) bq->state = state; mutex_unlock(&bq->lock); - if (!state.power_good) + if (!bq->iilimit_autoset_enable) { + dev_dbg(bq->dev, "manually setting iilimit = %u\n", + bq->init_data.iilimit); + + /* program fixed input current limit */ + ret = bq24257_field_write(bq, F_IILIMIT, + bq->init_data.iilimit); + if (ret < 0) + return ret; + } else if (!state.power_good) /* activate D+/D- detection algorithm */ ret = bq24257_field_write(bq, F_DPDM_EN, 1); else if (state.fault != FAULT_NO_BAT) @@ -569,6 +743,7 @@ static int bq24257_hw_init(struct bq24257_device *bq) static enum power_supply_property bq24257_power_supply_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_HEALTH, @@ -577,6 +752,7 @@ static enum power_supply_property bq24257_power_supply_props[] = { POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, }; static char *bq24257_charger_supplied_to[] = { @@ -589,45 +765,127 @@ static const struct power_supply_desc bq24257_power_supply_desc = { .properties = bq24257_power_supply_props, .num_properties = ARRAY_SIZE(bq24257_power_supply_props), .get_property = bq24257_power_supply_get_property, + .set_property = bq24257_power_supply_set_property, + .property_is_writeable = bq24257_power_supply_property_is_writeable, }; -static int bq24257_power_supply_init(struct bq24257_device *bq) +static ssize_t bq24257_show_ovp_voltage(struct device *dev, + struct device_attribute *attr, + char *buf) { - struct power_supply_config psy_cfg = { .drv_data = bq, }; + struct power_supply *psy = dev_get_drvdata(dev); + struct bq24257_device *bq = power_supply_get_drvdata(psy); - psy_cfg.supplied_to = bq24257_charger_supplied_to; - psy_cfg.num_supplicants = ARRAY_SIZE(bq24257_charger_supplied_to); + return scnprintf(buf, PAGE_SIZE, "%u\n", + bq24257_vovp_map[bq->init_data.vovp]); +} - bq->charger = power_supply_register(bq->dev, &bq24257_power_supply_desc, - &psy_cfg); - if (IS_ERR(bq->charger)) - return PTR_ERR(bq->charger); +static ssize_t bq24257_show_in_dpm_voltage(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct power_supply *psy = dev_get_drvdata(dev); + struct bq24257_device *bq = power_supply_get_drvdata(psy); - return 0; + return scnprintf(buf, PAGE_SIZE, "%u\n", + bq24257_vindpm_map[bq->init_data.vindpm]); } -static int bq24257_irq_probe(struct bq24257_device *bq) +static ssize_t bq24257_sysfs_show_enable(struct device *dev, + struct device_attribute *attr, + char *buf) { - struct gpio_desc *stat_irq; + struct power_supply *psy = dev_get_drvdata(dev); + struct bq24257_device *bq = power_supply_get_drvdata(psy); + int ret; - stat_irq = devm_gpiod_get_index(bq->dev, BQ24257_STAT_IRQ, 0, GPIOD_IN); - if (IS_ERR(stat_irq)) { - dev_err(bq->dev, "could not probe stat_irq pin\n"); - return PTR_ERR(stat_irq); - } + if (strcmp(attr->attr.name, "high_impedance_enable") == 0) + ret = bq24257_field_read(bq, F_HZ_MODE); + else if (strcmp(attr->attr.name, "sysoff_enable") == 0) + ret = bq24257_field_read(bq, F_SYSOFF); + else + return -EINVAL; - return gpiod_to_irq(stat_irq); + if (ret < 0) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%d\n", ret); } -static int bq24257_pg_gpio_probe(struct bq24257_device *bq) +static ssize_t bq24257_sysfs_set_enable(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) { - bq->pg = devm_gpiod_get_index(bq->dev, BQ24257_PG_GPIO, 0, GPIOD_IN); - if (IS_ERR(bq->pg)) { - dev_err(bq->dev, "could not probe PG pin\n"); - return PTR_ERR(bq->pg); + struct power_supply *psy = dev_get_drvdata(dev); + struct bq24257_device *bq = power_supply_get_drvdata(psy); + long val; + int ret; + + if (kstrtol(buf, 10, &val) < 0) + return -EINVAL; + + if (strcmp(attr->attr.name, "high_impedance_enable") == 0) + ret = bq24257_field_write(bq, F_HZ_MODE, (bool)val); + else if (strcmp(attr->attr.name, "sysoff_enable") == 0) + ret = bq24257_field_write(bq, F_SYSOFF, (bool)val); + else + return -EINVAL; + + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(ovp_voltage, S_IRUGO, bq24257_show_ovp_voltage, NULL); +static DEVICE_ATTR(in_dpm_voltage, S_IRUGO, bq24257_show_in_dpm_voltage, NULL); +static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO, + bq24257_sysfs_show_enable, bq24257_sysfs_set_enable); +static DEVICE_ATTR(sysoff_enable, S_IWUSR | S_IRUGO, + bq24257_sysfs_show_enable, bq24257_sysfs_set_enable); + +static struct attribute *bq24257_charger_attr[] = { + &dev_attr_ovp_voltage.attr, + &dev_attr_in_dpm_voltage.attr, + &dev_attr_high_impedance_enable.attr, + &dev_attr_sysoff_enable.attr, + NULL, +}; + +static const struct attribute_group bq24257_attr_group = { + .attrs = bq24257_charger_attr, +}; + +static int bq24257_power_supply_init(struct bq24257_device *bq) +{ + struct power_supply_config psy_cfg = { .drv_data = bq, }; + + psy_cfg.supplied_to = bq24257_charger_supplied_to; + psy_cfg.num_supplicants = ARRAY_SIZE(bq24257_charger_supplied_to); + + bq->charger = devm_power_supply_register(bq->dev, + &bq24257_power_supply_desc, + &psy_cfg); + + return PTR_ERR_OR_ZERO(bq->charger); +} + +static void bq24257_pg_gpio_probe(struct bq24257_device *bq) +{ + bq->pg = devm_gpiod_get_optional(bq->dev, BQ24257_PG_GPIO, GPIOD_IN); + + if (PTR_ERR(bq->pg) == -EPROBE_DEFER) { + dev_info(bq->dev, "probe retry requested for PG pin\n"); + return; + } else if (IS_ERR(bq->pg)) { + dev_err(bq->dev, "error probing PG pin\n"); + bq->pg = NULL; + return; } - return 0; + if (bq->pg) + dev_dbg(bq->dev, "probed PG pin = %d\n", desc_to_gpio(bq->pg)); } static int bq24257_fw_probe(struct bq24257_device *bq) @@ -635,6 +893,7 @@ static int bq24257_fw_probe(struct bq24257_device *bq) int ret; u32 property; + /* Required properties */ ret = device_property_read_u32(bq->dev, "ti,charge-current", &property); if (ret < 0) return ret; @@ -658,6 +917,43 @@ static int bq24257_fw_probe(struct bq24257_device *bq) bq->init_data.iterm = bq24257_find_idx(property, bq24257_iterm_map, BQ24257_ITERM_MAP_SIZE); + /* Optional properties. If not provided use reasonable default. */ + ret = device_property_read_u32(bq->dev, "ti,current-limit", + &property); + if (ret < 0) { + bq->iilimit_autoset_enable = true; + + /* + * Explicitly set a default value which will be needed for + * devices that don't support the automatic setting of the input + * current limit through the charger type detection mechanism. + */ + bq->init_data.iilimit = IILIMIT_500; + } else + bq->init_data.iilimit = + bq24257_find_idx(property, + bq24257_iilimit_map, + BQ24257_IILIMIT_MAP_SIZE); + + ret = device_property_read_u32(bq->dev, "ti,ovp-voltage", + &property); + if (ret < 0) + bq->init_data.vovp = VOVP_6500; + else + bq->init_data.vovp = bq24257_find_idx(property, + bq24257_vovp_map, + BQ24257_VOVP_MAP_SIZE); + + ret = device_property_read_u32(bq->dev, "ti,in-dpm-voltage", + &property); + if (ret < 0) + bq->init_data.vindpm = VINDPM_4360; + else + bq->init_data.vindpm = + bq24257_find_idx(property, + bq24257_vindpm_map, + BQ24257_VINDPM_MAP_SIZE); + return 0; } @@ -666,6 +962,7 @@ static int bq24257_probe(struct i2c_client *client, { struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct device *dev = &client->dev; + const struct acpi_device_id *acpi_id; struct bq24257_device *bq; int ret; int i; @@ -682,6 +979,18 @@ static int bq24257_probe(struct i2c_client *client, bq->client = client; bq->dev = dev; + if (ACPI_HANDLE(dev)) { + acpi_id = acpi_match_device(dev->driver->acpi_match_table, + &client->dev); + if (!acpi_id) { + dev_err(dev, "Failed to match ACPI device\n"); + return -ENODEV; + } + bq->chip = (enum bq2425x_chip)acpi_id->driver_data; + } else { + bq->chip = (enum bq2425x_chip)id->driver_data; + } + mutex_init(&bq->lock); bq->rmap = devm_regmap_init_i2c(client, &bq24257_regmap_config); @@ -703,8 +1012,6 @@ static int bq24257_probe(struct i2c_client *client, i2c_set_clientdata(client, bq); - INIT_DELAYED_WORK(&bq->iilimit_setup_work, bq24257_iilimit_setup_work); - if (!dev->platform_data) { ret = bq24257_fw_probe(bq); if (ret < 0) { @@ -715,10 +1022,31 @@ static int bq24257_probe(struct i2c_client *client, return -ENODEV; } - /* we can only check Power Good status by probing the PG pin */ - ret = bq24257_pg_gpio_probe(bq); - if (ret < 0) - return ret; + /* + * The BQ24250 doesn't support the D+/D- based charger type detection + * used for the automatic setting of the input current limit setting so + * explicitly disable that feature. + */ + if (bq->chip == BQ24250) + bq->iilimit_autoset_enable = false; + + if (bq->iilimit_autoset_enable) + INIT_DELAYED_WORK(&bq->iilimit_setup_work, + bq24257_iilimit_setup_work); + + /* + * The BQ24250 doesn't have a dedicated Power Good (PG) pin so let's + * not probe for it and instead use a SW-based approach to determine + * the PG state. We also use a SW-based approach for all other devices + * if the PG pin is either not defined or can't be probed. + */ + if (bq->chip != BQ24250) + bq24257_pg_gpio_probe(bq); + + if (PTR_ERR(bq->pg) == -EPROBE_DEFER) + return PTR_ERR(bq->pg); + else if (!bq->pg) + dev_info(bq->dev, "using SW-based power-good detection\n"); /* reset all registers to defaults */ ret = bq24257_field_write(bq, F_RESET, 1); @@ -740,36 +1068,39 @@ static int bq24257_probe(struct i2c_client *client, return ret; } - if (client->irq <= 0) - client->irq = bq24257_irq_probe(bq); - - if (client->irq < 0) { - dev_err(dev, "no irq resource found\n"); - return client->irq; - } - ret = devm_request_threaded_irq(dev, client->irq, NULL, bq24257_irq_handler_thread, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, - BQ24257_STAT_IRQ, bq); - if (ret) + bq2425x_chip_name[bq->chip], bq); + if (ret) { + dev_err(dev, "Failed to request IRQ #%d\n", client->irq); return ret; + } ret = bq24257_power_supply_init(bq); - if (ret < 0) + if (ret < 0) { dev_err(dev, "Failed to register power supply\n"); + return ret; + } - return ret; + ret = sysfs_create_group(&bq->charger->dev.kobj, &bq24257_attr_group); + if (ret < 0) { + dev_err(dev, "Can't create sysfs entries\n"); + return ret; + } + + return 0; } static int bq24257_remove(struct i2c_client *client) { struct bq24257_device *bq = i2c_get_clientdata(client); - cancel_delayed_work_sync(&bq->iilimit_setup_work); + if (bq->iilimit_autoset_enable) + cancel_delayed_work_sync(&bq->iilimit_setup_work); - power_supply_unregister(bq->charger); + sysfs_remove_group(&bq->charger->dev.kobj, &bq24257_attr_group); bq24257_field_write(bq, F_RESET, 1); /* reset to defaults */ @@ -782,7 +1113,8 @@ static int bq24257_suspend(struct device *dev) struct bq24257_device *bq = dev_get_drvdata(dev); int ret = 0; - cancel_delayed_work_sync(&bq->iilimit_setup_work); + if (bq->iilimit_autoset_enable) + cancel_delayed_work_sync(&bq->iilimit_setup_work); /* reset all registers to default (and activate standalone mode) */ ret = bq24257_field_write(bq, F_RESET, 1); @@ -823,19 +1155,25 @@ static const struct dev_pm_ops bq24257_pm = { }; static const struct i2c_device_id bq24257_i2c_ids[] = { - { "bq24257", 0 }, + { "bq24250", BQ24250 }, + { "bq24251", BQ24251 }, + { "bq24257", BQ24257 }, {}, }; MODULE_DEVICE_TABLE(i2c, bq24257_i2c_ids); static const struct of_device_id bq24257_of_match[] = { + { .compatible = "ti,bq24250", }, + { .compatible = "ti,bq24251", }, { .compatible = "ti,bq24257", }, { }, }; MODULE_DEVICE_TABLE(of, bq24257_of_match); static const struct acpi_device_id bq24257_acpi_match[] = { - {"BQ242570", 0}, + { "BQ242500", BQ24250 }, + { "BQ242510", BQ24251 }, + { "BQ242570", BQ24257 }, {}, }; MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match); diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c deleted file mode 100644 index 8287261fd978..000000000000 --- a/drivers/power/bq27x00_battery.c +++ /dev/null @@ -1,1129 +0,0 @@ -/* - * BQ27x00 battery driver - * - * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it> - * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it> - * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de> - * Copyright (C) 2011 Pali Rohár <pali.rohar@gmail.com> - * - * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - * - * Datasheets: - * http://focus.ti.com/docs/prod/folders/print/bq27000.html - * http://focus.ti.com/docs/prod/folders/print/bq27500.html - * http://www.ti.com/product/bq27425-g1 - * http://www.ti.com/product/BQ27742-G1 - * http://www.ti.com/product/BQ27510-G3 - */ - -#include <linux/device.h> -#include <linux/module.h> -#include <linux/param.h> -#include <linux/jiffies.h> -#include <linux/workqueue.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/power_supply.h> -#include <linux/idr.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <asm/unaligned.h> - -#include <linux/power/bq27x00_battery.h> - -#define DRIVER_VERSION "1.2.0" - -#define BQ27XXX_MANUFACTURER "Texas Instruments" - -#define BQ27x00_REG_TEMP 0x06 -#define BQ27x00_REG_VOLT 0x08 -#define BQ27x00_REG_AI 0x14 -#define BQ27x00_REG_FLAGS 0x0A -#define BQ27x00_REG_TTE 0x16 -#define BQ27x00_REG_TTF 0x18 -#define BQ27x00_REG_TTECP 0x26 -#define BQ27x00_REG_NAC 0x0C /* Nominal available capacity */ -#define BQ27x00_REG_LMD 0x12 /* Last measured discharge */ -#define BQ27x00_REG_CYCT 0x2A /* Cycle count total */ -#define BQ27x00_REG_AE 0x22 /* Available energy */ -#define BQ27x00_POWER_AVG 0x24 - -#define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */ -#define BQ27000_REG_ILMD 0x76 /* Initial last measured discharge */ -#define BQ27000_FLAG_EDVF BIT(0) /* Final End-of-Discharge-Voltage flag */ -#define BQ27000_FLAG_EDV1 BIT(1) /* First End-of-Discharge-Voltage flag */ -#define BQ27000_FLAG_CI BIT(4) /* Capacity Inaccurate flag */ -#define BQ27000_FLAG_FC BIT(5) -#define BQ27000_FLAG_CHGS BIT(7) /* Charge state flag */ - -#define BQ27500_REG_SOC 0x2C -#define BQ27500_REG_DCAP 0x3C /* Design capacity */ -#define BQ27500_FLAG_DSC BIT(0) -#define BQ27500_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */ -#define BQ27500_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */ -#define BQ27500_FLAG_FC BIT(9) -#define BQ27500_FLAG_OTC BIT(15) - -#define BQ27742_POWER_AVG 0x76 - -#define BQ27510_REG_SOC 0x20 -#define BQ27510_REG_DCAP 0x2E /* Design capacity */ -#define BQ27510_REG_CYCT 0x1E /* Cycle count total */ - -/* bq27425 register addresses are same as bq27x00 addresses minus 4 */ -#define BQ27425_REG_OFFSET 0x04 -#define BQ27425_REG_SOC (0x1C + BQ27425_REG_OFFSET) -#define BQ27425_REG_DCAP (0x3C + BQ27425_REG_OFFSET) - -#define BQ27000_RS 20 /* Resistor sense */ -#define BQ27x00_POWER_CONSTANT (256 * 29200 / 1000) - -struct bq27x00_device_info; -struct bq27x00_access_methods { - int (*read)(struct bq27x00_device_info *di, u8 reg, bool single); -}; - -enum bq27x00_chip { BQ27000, BQ27500, BQ27425, BQ27742, BQ27510}; - -struct bq27x00_reg_cache { - int temperature; - int time_to_empty; - int time_to_empty_avg; - int time_to_full; - int charge_full; - int cycle_count; - int capacity; - int energy; - int flags; - int power_avg; - int health; -}; - -struct bq27x00_device_info { - struct device *dev; - int id; - enum bq27x00_chip chip; - - struct bq27x00_reg_cache cache; - int charge_design_full; - - unsigned long last_update; - struct delayed_work work; - - struct power_supply *bat; - - struct bq27x00_access_methods bus; - - struct mutex lock; -}; - -static enum power_supply_property bq27x00_battery_props[] = { - POWER_SUPPLY_PROP_STATUS, - POWER_SUPPLY_PROP_PRESENT, - POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_CURRENT_NOW, - POWER_SUPPLY_PROP_CAPACITY, - POWER_SUPPLY_PROP_CAPACITY_LEVEL, - POWER_SUPPLY_PROP_TEMP, - POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, - POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, - POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, - POWER_SUPPLY_PROP_TECHNOLOGY, - POWER_SUPPLY_PROP_CHARGE_FULL, - POWER_SUPPLY_PROP_CHARGE_NOW, - POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, - POWER_SUPPLY_PROP_CYCLE_COUNT, - POWER_SUPPLY_PROP_ENERGY_NOW, - POWER_SUPPLY_PROP_POWER_AVG, - POWER_SUPPLY_PROP_HEALTH, - POWER_SUPPLY_PROP_MANUFACTURER, -}; - -static enum power_supply_property bq27425_battery_props[] = { - POWER_SUPPLY_PROP_STATUS, - POWER_SUPPLY_PROP_PRESENT, - POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_CURRENT_NOW, - POWER_SUPPLY_PROP_CAPACITY, - POWER_SUPPLY_PROP_CAPACITY_LEVEL, - POWER_SUPPLY_PROP_TEMP, - POWER_SUPPLY_PROP_TECHNOLOGY, - POWER_SUPPLY_PROP_CHARGE_FULL, - POWER_SUPPLY_PROP_CHARGE_NOW, - POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, - POWER_SUPPLY_PROP_MANUFACTURER, -}; - -static enum power_supply_property bq27742_battery_props[] = { - POWER_SUPPLY_PROP_STATUS, - POWER_SUPPLY_PROP_PRESENT, - POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_CURRENT_NOW, - POWER_SUPPLY_PROP_CAPACITY, - POWER_SUPPLY_PROP_CAPACITY_LEVEL, - POWER_SUPPLY_PROP_TEMP, - POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, - POWER_SUPPLY_PROP_TECHNOLOGY, - POWER_SUPPLY_PROP_CHARGE_FULL, - POWER_SUPPLY_PROP_CHARGE_NOW, - POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, - POWER_SUPPLY_PROP_CYCLE_COUNT, - POWER_SUPPLY_PROP_POWER_AVG, - POWER_SUPPLY_PROP_HEALTH, - POWER_SUPPLY_PROP_MANUFACTURER, -}; - -static enum power_supply_property bq27510_battery_props[] = { - POWER_SUPPLY_PROP_STATUS, - POWER_SUPPLY_PROP_PRESENT, - POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_CURRENT_NOW, - POWER_SUPPLY_PROP_CAPACITY, - POWER_SUPPLY_PROP_CAPACITY_LEVEL, - POWER_SUPPLY_PROP_TEMP, - POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, - POWER_SUPPLY_PROP_TECHNOLOGY, - POWER_SUPPLY_PROP_CHARGE_FULL, - POWER_SUPPLY_PROP_CHARGE_NOW, - POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, - POWER_SUPPLY_PROP_CYCLE_COUNT, - POWER_SUPPLY_PROP_POWER_AVG, - POWER_SUPPLY_PROP_HEALTH, - POWER_SUPPLY_PROP_MANUFACTURER, -}; - -static unsigned int poll_interval = 360; -module_param(poll_interval, uint, 0644); -MODULE_PARM_DESC(poll_interval, - "battery poll interval in seconds - 0 disables polling"); - -/* - * Common code for BQ27x00 devices - */ - -static inline int bq27x00_read(struct bq27x00_device_info *di, u8 reg, - bool single) -{ - if (di->chip == BQ27425) - return di->bus.read(di, reg - BQ27425_REG_OFFSET, single); - return di->bus.read(di, reg, single); -} - -/* - * Higher versions of the chip like BQ27425 and BQ27500 - * differ from BQ27000 and BQ27200 in calculation of certain - * parameters. Hence we need to check for the chip type. - */ -static bool bq27xxx_is_chip_version_higher(struct bq27x00_device_info *di) -{ - if (di->chip == BQ27425 || di->chip == BQ27500 || di->chip == BQ27742 - || di->chip == BQ27510) - return true; - return false; -} - -/* - * Return the battery Relative State-of-Charge - * Or < 0 if something fails. - */ -static int bq27x00_battery_read_rsoc(struct bq27x00_device_info *di) -{ - int rsoc; - - if (di->chip == BQ27500 || di->chip == BQ27742) - rsoc = bq27x00_read(di, BQ27500_REG_SOC, false); - else if (di->chip == BQ27510) - rsoc = bq27x00_read(di, BQ27510_REG_SOC, false); - else if (di->chip == BQ27425) - rsoc = bq27x00_read(di, BQ27425_REG_SOC, false); - else - rsoc = bq27x00_read(di, BQ27000_REG_RSOC, true); - - if (rsoc < 0) - dev_dbg(di->dev, "error reading relative State-of-Charge\n"); - - return rsoc; -} - -/* - * Return a battery charge value in µAh - * Or < 0 if something fails. - */ -static int bq27x00_battery_read_charge(struct bq27x00_device_info *di, u8 reg) -{ - int charge; - - charge = bq27x00_read(di, reg, false); - if (charge < 0) { - dev_dbg(di->dev, "error reading charge register %02x: %d\n", - reg, charge); - return charge; - } - - if (bq27xxx_is_chip_version_higher(di)) - charge *= 1000; - else - charge = charge * 3570 / BQ27000_RS; - - return charge; -} - -/* - * Return the battery Nominal available capaciy in µAh - * Or < 0 if something fails. - */ -static inline int bq27x00_battery_read_nac(struct bq27x00_device_info *di) -{ - int flags; - bool is_bq27500 = di->chip == BQ27500; - bool is_bq27742 = di->chip == BQ27742; - bool is_higher = bq27xxx_is_chip_version_higher(di); - bool flags_1b = !(is_bq27500 || is_bq27742); - - flags = bq27x00_read(di, BQ27x00_REG_FLAGS, flags_1b); - if (flags >= 0 && !is_higher && (flags & BQ27000_FLAG_CI)) - return -ENODATA; - - return bq27x00_battery_read_charge(di, BQ27x00_REG_NAC); -} - -/* - * Return the battery Last measured discharge in µAh - * Or < 0 if something fails. - */ -static inline int bq27x00_battery_read_lmd(struct bq27x00_device_info *di) -{ - return bq27x00_battery_read_charge(di, BQ27x00_REG_LMD); -} - -/* - * Return the battery Initial last measured discharge in µAh - * Or < 0 if something fails. - */ -static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di) -{ - int ilmd; - - if (bq27xxx_is_chip_version_higher(di)) { - if (di->chip == BQ27425) - ilmd = bq27x00_read(di, BQ27425_REG_DCAP, false); - else if (di->chip == BQ27510) - ilmd = bq27x00_read(di, BQ27510_REG_DCAP, false); - else - ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false); - } else { - ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true); - } - - if (ilmd < 0) { - dev_dbg(di->dev, "error reading initial last measured discharge\n"); - return ilmd; - } - - if (bq27xxx_is_chip_version_higher(di)) - ilmd *= 1000; - else - ilmd = ilmd * 256 * 3570 / BQ27000_RS; - - return ilmd; -} - -/* - * Return the battery Available energy in µWh - * Or < 0 if something fails. - */ -static int bq27x00_battery_read_energy(struct bq27x00_device_info *di) -{ - int ae; - - ae = bq27x00_read(di, BQ27x00_REG_AE, false); - if (ae < 0) { - dev_dbg(di->dev, "error reading available energy\n"); - return ae; - } - - if (di->chip == BQ27500) - ae *= 1000; - else - ae = ae * 29200 / BQ27000_RS; - - return ae; -} - -/* - * Return the battery temperature in tenths of degree Kelvin - * Or < 0 if something fails. - */ -static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di) -{ - int temp; - - temp = bq27x00_read(di, BQ27x00_REG_TEMP, false); - if (temp < 0) { - dev_err(di->dev, "error reading temperature\n"); - return temp; - } - - if (!bq27xxx_is_chip_version_higher(di)) - temp = 5 * temp / 2; - - return temp; -} - -/* - * Return the battery Cycle count total - * Or < 0 if something fails. - */ -static int bq27x00_battery_read_cyct(struct bq27x00_device_info *di) -{ - int cyct; - - if (di->chip == BQ27510) - cyct = bq27x00_read(di, BQ27510_REG_CYCT, false); - else - cyct = bq27x00_read(di, BQ27x00_REG_CYCT, false); - if (cyct < 0) - dev_err(di->dev, "error reading cycle count total\n"); - - return cyct; -} - -/* - * Read a time register. - * Return < 0 if something fails. - */ -static int bq27x00_battery_read_time(struct bq27x00_device_info *di, u8 reg) -{ - int tval; - - tval = bq27x00_read(di, reg, false); - if (tval < 0) { - dev_dbg(di->dev, "error reading time register %02x: %d\n", - reg, tval); - return tval; - } - - if (tval == 65535) - return -ENODATA; - - return tval * 60; -} - -/* - * Read a power avg register. - * Return < 0 if something fails. - */ -static int bq27x00_battery_read_pwr_avg(struct bq27x00_device_info *di, u8 reg) -{ - int tval; - - tval = bq27x00_read(di, reg, false); - if (tval < 0) { - dev_err(di->dev, "error reading power avg rgister %02x: %d\n", - reg, tval); - return tval; - } - - if (di->chip == BQ27500) - return tval; - else - return (tval * BQ27x00_POWER_CONSTANT) / BQ27000_RS; -} - -/* - * Read flag register. - * Return < 0 if something fails. - */ -static int bq27x00_battery_read_health(struct bq27x00_device_info *di) -{ - int tval; - - tval = bq27x00_read(di, BQ27x00_REG_FLAGS, false); - if (tval < 0) { - dev_err(di->dev, "error reading flag register:%d\n", tval); - return tval; - } - - if (di->chip == BQ27500) { - if (tval & BQ27500_FLAG_SOCF) - tval = POWER_SUPPLY_HEALTH_DEAD; - else if (tval & BQ27500_FLAG_OTC) - tval = POWER_SUPPLY_HEALTH_OVERHEAT; - else - tval = POWER_SUPPLY_HEALTH_GOOD; - return tval; - } else if (di->chip == BQ27510) { - if (tval & BQ27500_FLAG_OTC) - return POWER_SUPPLY_HEALTH_OVERHEAT; - return POWER_SUPPLY_HEALTH_GOOD; - } else { - if (tval & BQ27000_FLAG_EDV1) - tval = POWER_SUPPLY_HEALTH_DEAD; - else - tval = POWER_SUPPLY_HEALTH_GOOD; - return tval; - } - - return -1; -} - -static void bq27x00_update(struct bq27x00_device_info *di) -{ - struct bq27x00_reg_cache cache = {0, }; - bool is_bq27500 = di->chip == BQ27500; - bool is_bq27510 = di->chip == BQ27510; - bool is_bq27425 = di->chip == BQ27425; - bool is_bq27742 = di->chip == BQ27742; - bool flags_1b = !(is_bq27500 || is_bq27742); - - cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, flags_1b); - if ((cache.flags & 0xff) == 0xff) - /* read error */ - cache.flags = -1; - if (cache.flags >= 0) { - if (!is_bq27500 && !is_bq27425 && !is_bq27742 && !is_bq27510 - && (cache.flags & BQ27000_FLAG_CI)) { - dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n"); - cache.capacity = -ENODATA; - cache.energy = -ENODATA; - cache.time_to_empty = -ENODATA; - cache.time_to_empty_avg = -ENODATA; - cache.time_to_full = -ENODATA; - cache.charge_full = -ENODATA; - cache.health = -ENODATA; - } else { - cache.capacity = bq27x00_battery_read_rsoc(di); - if (is_bq27742 || is_bq27510) - cache.time_to_empty = - bq27x00_battery_read_time(di, - BQ27x00_REG_TTE); - else if (!is_bq27425) { - cache.energy = bq27x00_battery_read_energy(di); - cache.time_to_empty = - bq27x00_battery_read_time(di, - BQ27x00_REG_TTE); - cache.time_to_empty_avg = - bq27x00_battery_read_time(di, - BQ27x00_REG_TTECP); - cache.time_to_full = - bq27x00_battery_read_time(di, - BQ27x00_REG_TTF); - } - cache.charge_full = bq27x00_battery_read_lmd(di); - cache.health = bq27x00_battery_read_health(di); - } - cache.temperature = bq27x00_battery_read_temperature(di); - if (!is_bq27425) - cache.cycle_count = bq27x00_battery_read_cyct(di); - if (is_bq27742) - cache.power_avg = - bq27x00_battery_read_pwr_avg(di, - BQ27742_POWER_AVG); - else - cache.power_avg = - bq27x00_battery_read_pwr_avg(di, - BQ27x00_POWER_AVG); - - /* We only have to read charge design full once */ - if (di->charge_design_full <= 0) - di->charge_design_full = bq27x00_battery_read_ilmd(di); - } - - if (di->cache.capacity != cache.capacity) - power_supply_changed(di->bat); - - if (memcmp(&di->cache, &cache, sizeof(cache)) != 0) - di->cache = cache; - - di->last_update = jiffies; -} - -static void bq27x00_battery_poll(struct work_struct *work) -{ - struct bq27x00_device_info *di = - container_of(work, struct bq27x00_device_info, work.work); - - bq27x00_update(di); - - if (poll_interval > 0) { - /* The timer does not have to be accurate. */ - set_timer_slack(&di->work.timer, poll_interval * HZ / 4); - schedule_delayed_work(&di->work, poll_interval * HZ); - } -} - -/* - * Return the battery average current in µA - * Note that current can be negative signed as well - * Or 0 if something fails. - */ -static int bq27x00_battery_current(struct bq27x00_device_info *di, - union power_supply_propval *val) -{ - int curr; - int flags; - - curr = bq27x00_read(di, BQ27x00_REG_AI, false); - if (curr < 0) { - dev_err(di->dev, "error reading current\n"); - return curr; - } - - if (bq27xxx_is_chip_version_higher(di)) { - /* bq27500 returns signed value */ - val->intval = (int)((s16)curr) * 1000; - } else { - flags = bq27x00_read(di, BQ27x00_REG_FLAGS, false); - if (flags & BQ27000_FLAG_CHGS) { - dev_dbg(di->dev, "negative current!\n"); - curr = -curr; - } - - val->intval = curr * 3570 / BQ27000_RS; - } - - return 0; -} - -static int bq27x00_battery_status(struct bq27x00_device_info *di, - union power_supply_propval *val) -{ - int status; - - if (bq27xxx_is_chip_version_higher(di)) { - if (di->cache.flags & BQ27500_FLAG_FC) - status = POWER_SUPPLY_STATUS_FULL; - else if (di->cache.flags & BQ27500_FLAG_DSC) - status = POWER_SUPPLY_STATUS_DISCHARGING; - else - status = POWER_SUPPLY_STATUS_CHARGING; - } else { - if (di->cache.flags & BQ27000_FLAG_FC) - status = POWER_SUPPLY_STATUS_FULL; - else if (di->cache.flags & BQ27000_FLAG_CHGS) - status = POWER_SUPPLY_STATUS_CHARGING; - else if (power_supply_am_i_supplied(di->bat)) - status = POWER_SUPPLY_STATUS_NOT_CHARGING; - else - status = POWER_SUPPLY_STATUS_DISCHARGING; - } - - val->intval = status; - - return 0; -} - -static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di, - union power_supply_propval *val) -{ - int level; - - if (bq27xxx_is_chip_version_higher(di)) { - if (di->cache.flags & BQ27500_FLAG_FC) - level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; - else if (di->cache.flags & BQ27500_FLAG_SOC1) - level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; - else if (di->cache.flags & BQ27500_FLAG_SOCF) - level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; - else - level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; - } else { - if (di->cache.flags & BQ27000_FLAG_FC) - level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; - else if (di->cache.flags & BQ27000_FLAG_EDV1) - level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; - else if (di->cache.flags & BQ27000_FLAG_EDVF) - level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; - else - level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; - } - - val->intval = level; - - return 0; -} - -/* - * Return the battery Voltage in millivolts - * Or < 0 if something fails. - */ -static int bq27x00_battery_voltage(struct bq27x00_device_info *di, - union power_supply_propval *val) -{ - int volt; - - volt = bq27x00_read(di, BQ27x00_REG_VOLT, false); - if (volt < 0) { - dev_err(di->dev, "error reading voltage\n"); - return volt; - } - - val->intval = volt * 1000; - - return 0; -} - -static int bq27x00_simple_value(int value, - union power_supply_propval *val) -{ - if (value < 0) - return value; - - val->intval = value; - - return 0; -} - -static int bq27x00_battery_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - int ret = 0; - struct bq27x00_device_info *di = power_supply_get_drvdata(psy); - - mutex_lock(&di->lock); - if (time_is_before_jiffies(di->last_update + 5 * HZ)) { - cancel_delayed_work_sync(&di->work); - bq27x00_battery_poll(&di->work.work); - } - mutex_unlock(&di->lock); - - if (psp != POWER_SUPPLY_PROP_PRESENT && di->cache.flags < 0) - return -ENODEV; - - switch (psp) { - case POWER_SUPPLY_PROP_STATUS: - ret = bq27x00_battery_status(di, val); - break; - case POWER_SUPPLY_PROP_VOLTAGE_NOW: - ret = bq27x00_battery_voltage(di, val); - break; - case POWER_SUPPLY_PROP_PRESENT: - val->intval = di->cache.flags < 0 ? 0 : 1; - break; - case POWER_SUPPLY_PROP_CURRENT_NOW: - ret = bq27x00_battery_current(di, val); - break; - case POWER_SUPPLY_PROP_CAPACITY: - ret = bq27x00_simple_value(di->cache.capacity, val); - break; - case POWER_SUPPLY_PROP_CAPACITY_LEVEL: - ret = bq27x00_battery_capacity_level(di, val); - break; - case POWER_SUPPLY_PROP_TEMP: - ret = bq27x00_simple_value(di->cache.temperature, val); - if (ret == 0) - val->intval -= 2731; - break; - case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: - ret = bq27x00_simple_value(di->cache.time_to_empty, val); - break; - case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: - ret = bq27x00_simple_value(di->cache.time_to_empty_avg, val); - break; - case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: - ret = bq27x00_simple_value(di->cache.time_to_full, val); - break; - case POWER_SUPPLY_PROP_TECHNOLOGY: - val->intval = POWER_SUPPLY_TECHNOLOGY_LION; - break; - case POWER_SUPPLY_PROP_CHARGE_NOW: - ret = bq27x00_simple_value(bq27x00_battery_read_nac(di), val); - break; - case POWER_SUPPLY_PROP_CHARGE_FULL: - ret = bq27x00_simple_value(di->cache.charge_full, val); - break; - case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: - ret = bq27x00_simple_value(di->charge_design_full, val); - break; - case POWER_SUPPLY_PROP_CYCLE_COUNT: - ret = bq27x00_simple_value(di->cache.cycle_count, val); - break; - case POWER_SUPPLY_PROP_ENERGY_NOW: - ret = bq27x00_simple_value(di->cache.energy, val); - break; - case POWER_SUPPLY_PROP_POWER_AVG: - ret = bq27x00_simple_value(di->cache.power_avg, val); - break; - case POWER_SUPPLY_PROP_HEALTH: - ret = bq27x00_simple_value(di->cache.health, val); - break; - case POWER_SUPPLY_PROP_MANUFACTURER: - val->strval = BQ27XXX_MANUFACTURER; - break; - default: - return -EINVAL; - } - - return ret; -} - -static void bq27x00_external_power_changed(struct power_supply *psy) -{ - struct bq27x00_device_info *di = power_supply_get_drvdata(psy); - - cancel_delayed_work_sync(&di->work); - schedule_delayed_work(&di->work, 0); -} - -static int bq27x00_powersupply_init(struct bq27x00_device_info *di, - const char *name) -{ - int ret; - struct power_supply_desc *psy_desc; - struct power_supply_config psy_cfg = { .drv_data = di, }; - - psy_desc = devm_kzalloc(di->dev, sizeof(*psy_desc), GFP_KERNEL); - if (!psy_desc) - return -ENOMEM; - - psy_desc->name = name; - psy_desc->type = POWER_SUPPLY_TYPE_BATTERY; - if (di->chip == BQ27425) { - psy_desc->properties = bq27425_battery_props; - psy_desc->num_properties = ARRAY_SIZE(bq27425_battery_props); - } else if (di->chip == BQ27742) { - psy_desc->properties = bq27742_battery_props; - psy_desc->num_properties = ARRAY_SIZE(bq27742_battery_props); - } else if (di->chip == BQ27510) { - psy_desc->properties = bq27510_battery_props; - psy_desc->num_properties = ARRAY_SIZE(bq27510_battery_props); - } else { - psy_desc->properties = bq27x00_battery_props; - psy_desc->num_properties = ARRAY_SIZE(bq27x00_battery_props); - } - psy_desc->get_property = bq27x00_battery_get_property; - psy_desc->external_power_changed = bq27x00_external_power_changed; - - INIT_DELAYED_WORK(&di->work, bq27x00_battery_poll); - mutex_init(&di->lock); - - di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg); - if (IS_ERR(di->bat)) { - ret = PTR_ERR(di->bat); - dev_err(di->dev, "failed to register battery: %d\n", ret); - return ret; - } - - dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION); - - bq27x00_update(di); - - return 0; -} - -static void bq27x00_powersupply_unregister(struct bq27x00_device_info *di) -{ - /* - * power_supply_unregister call bq27x00_battery_get_property which - * call bq27x00_battery_poll. - * Make sure that bq27x00_battery_poll will not call - * schedule_delayed_work again after unregister (which cause OOPS). - */ - poll_interval = 0; - - cancel_delayed_work_sync(&di->work); - - power_supply_unregister(di->bat); - - mutex_destroy(&di->lock); -} - -/* i2c specific code */ -#ifdef CONFIG_BATTERY_BQ27X00_I2C - -/* If the system has several batteries we need a different name for each - * of them... - */ -static DEFINE_IDR(battery_id); -static DEFINE_MUTEX(battery_mutex); - -static int bq27x00_read_i2c(struct bq27x00_device_info *di, u8 reg, bool single) -{ - struct i2c_client *client = to_i2c_client(di->dev); - struct i2c_msg msg[2]; - unsigned char data[2]; - int ret; - - if (!client->adapter) - return -ENODEV; - - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].buf = ® - msg[0].len = sizeof(reg); - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = data; - if (single) - msg[1].len = 1; - else - msg[1].len = 2; - - ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); - if (ret < 0) - return ret; - - if (!single) - ret = get_unaligned_le16(data); - else - ret = data[0]; - - return ret; -} - -static int bq27x00_battery_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - char *name; - struct bq27x00_device_info *di; - int num; - int retval = 0; - - /* Get new ID for the new battery device */ - mutex_lock(&battery_mutex); - num = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL); - mutex_unlock(&battery_mutex); - if (num < 0) - return num; - - name = devm_kasprintf(&client->dev, GFP_KERNEL, "%s-%d", id->name, num); - if (!name) { - retval = -ENOMEM; - goto batt_failed; - } - - di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL); - if (!di) { - retval = -ENOMEM; - goto batt_failed; - } - - di->id = num; - di->dev = &client->dev; - di->chip = id->driver_data; - di->bus.read = &bq27x00_read_i2c; - - retval = bq27x00_powersupply_init(di, name); - if (retval) - goto batt_failed; - - i2c_set_clientdata(client, di); - - return 0; - -batt_failed: - mutex_lock(&battery_mutex); - idr_remove(&battery_id, num); - mutex_unlock(&battery_mutex); - - return retval; -} - -static int bq27x00_battery_remove(struct i2c_client *client) -{ - struct bq27x00_device_info *di = i2c_get_clientdata(client); - - bq27x00_powersupply_unregister(di); - - mutex_lock(&battery_mutex); - idr_remove(&battery_id, di->id); - mutex_unlock(&battery_mutex); - - return 0; -} - -static const struct i2c_device_id bq27x00_id[] = { - { "bq27200", BQ27000 }, /* bq27200 is same as bq27000, but with i2c */ - { "bq27500", BQ27500 }, - { "bq27425", BQ27425 }, - { "bq27742", BQ27742 }, - { "bq27510", BQ27510 }, - {}, -}; -MODULE_DEVICE_TABLE(i2c, bq27x00_id); - -static struct i2c_driver bq27x00_battery_driver = { - .driver = { - .name = "bq27x00-battery", - }, - .probe = bq27x00_battery_probe, - .remove = bq27x00_battery_remove, - .id_table = bq27x00_id, -}; - -static inline int bq27x00_battery_i2c_init(void) -{ - int ret = i2c_add_driver(&bq27x00_battery_driver); - - if (ret) - pr_err("Unable to register BQ27x00 i2c driver\n"); - - return ret; -} - -static inline void bq27x00_battery_i2c_exit(void) -{ - i2c_del_driver(&bq27x00_battery_driver); -} - -#else - -static inline int bq27x00_battery_i2c_init(void) { return 0; } -static inline void bq27x00_battery_i2c_exit(void) {}; - -#endif - -/* platform specific code */ -#ifdef CONFIG_BATTERY_BQ27X00_PLATFORM - -static int bq27000_read_platform(struct bq27x00_device_info *di, u8 reg, - bool single) -{ - struct device *dev = di->dev; - struct bq27000_platform_data *pdata = dev->platform_data; - unsigned int timeout = 3; - int upper, lower; - int temp; - - if (!single) { - /* Make sure the value has not changed in between reading the - * lower and the upper part */ - upper = pdata->read(dev, reg + 1); - do { - temp = upper; - if (upper < 0) - return upper; - - lower = pdata->read(dev, reg); - if (lower < 0) - return lower; - - upper = pdata->read(dev, reg + 1); - } while (temp != upper && --timeout); - - if (timeout == 0) - return -EIO; - - return (upper << 8) | lower; - } - - return pdata->read(dev, reg); -} - -static int bq27000_battery_probe(struct platform_device *pdev) -{ - struct bq27x00_device_info *di; - struct bq27000_platform_data *pdata = pdev->dev.platform_data; - const char *name; - - if (!pdata) { - dev_err(&pdev->dev, "no platform_data supplied\n"); - return -EINVAL; - } - - if (!pdata->read) { - dev_err(&pdev->dev, "no hdq read callback supplied\n"); - return -EINVAL; - } - - di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); - if (!di) - return -ENOMEM; - - platform_set_drvdata(pdev, di); - - di->dev = &pdev->dev; - di->chip = BQ27000; - - name = pdata->name ?: dev_name(&pdev->dev); - di->bus.read = &bq27000_read_platform; - - return bq27x00_powersupply_init(di, name); -} - -static int bq27000_battery_remove(struct platform_device *pdev) -{ - struct bq27x00_device_info *di = platform_get_drvdata(pdev); - - bq27x00_powersupply_unregister(di); - - return 0; -} - -static struct platform_driver bq27000_battery_driver = { - .probe = bq27000_battery_probe, - .remove = bq27000_battery_remove, - .driver = { - .name = "bq27000-battery", - }, -}; - -static inline int bq27x00_battery_platform_init(void) -{ - int ret = platform_driver_register(&bq27000_battery_driver); - - if (ret) - pr_err("Unable to register BQ27000 platform driver\n"); - - return ret; -} - -static inline void bq27x00_battery_platform_exit(void) -{ - platform_driver_unregister(&bq27000_battery_driver); -} - -#else - -static inline int bq27x00_battery_platform_init(void) { return 0; } -static inline void bq27x00_battery_platform_exit(void) {}; - -#endif - -/* - * Module stuff - */ - -static int __init bq27x00_battery_init(void) -{ - int ret; - - ret = bq27x00_battery_i2c_init(); - if (ret) - return ret; - - ret = bq27x00_battery_platform_init(); - if (ret) - bq27x00_battery_i2c_exit(); - - return ret; -} -module_init(bq27x00_battery_init); - -static void __exit bq27x00_battery_exit(void) -{ - bq27x00_battery_platform_exit(); - bq27x00_battery_i2c_exit(); -} -module_exit(bq27x00_battery_exit); - -#ifdef CONFIG_BATTERY_BQ27X00_PLATFORM -MODULE_ALIAS("platform:bq27000-battery"); -#endif - -#ifdef CONFIG_BATTERY_BQ27X00_I2C -MODULE_ALIAS("i2c:bq27000-battery"); -#endif - -MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); -MODULE_DESCRIPTION("BQ27x00 battery monitor driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/power/bq27xxx_battery.c b/drivers/power/bq27xxx_battery.c new file mode 100644 index 000000000000..880233ce9343 --- /dev/null +++ b/drivers/power/bq27xxx_battery.c @@ -0,0 +1,1375 @@ +/* + * BQ27xxx battery driver + * + * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it> + * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it> + * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de> + * Copyright (C) 2011 Pali Rohár <pali.rohar@gmail.com> + * + * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc. + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + * + * Datasheets: + * http://www.ti.com/product/bq27000 + * http://www.ti.com/product/bq27200 + * http://www.ti.com/product/bq27010 + * http://www.ti.com/product/bq27210 + * http://www.ti.com/product/bq27500 + * http://www.ti.com/product/bq27510-g3 + * http://www.ti.com/product/bq27520-g4 + * http://www.ti.com/product/bq27530-g1 + * http://www.ti.com/product/bq27531-g1 + * http://www.ti.com/product/bq27541-g1 + * http://www.ti.com/product/bq27542-g1 + * http://www.ti.com/product/bq27546-g1 + * http://www.ti.com/product/bq27742-g1 + * http://www.ti.com/product/bq27545-g1 + * http://www.ti.com/product/bq27421-g1 + * http://www.ti.com/product/bq27425-g1 + * http://www.ti.com/product/bq27411-g1 + * http://www.ti.com/product/bq27621-g1 + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/param.h> +#include <linux/jiffies.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/idr.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <asm/unaligned.h> + +#include <linux/power/bq27xxx_battery.h> + +#define DRIVER_VERSION "1.2.0" + +#define BQ27XXX_MANUFACTURER "Texas Instruments" + +/* BQ27XXX Flags */ +#define BQ27XXX_FLAG_DSC BIT(0) +#define BQ27XXX_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */ +#define BQ27XXX_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */ +#define BQ27XXX_FLAG_FC BIT(9) +#define BQ27XXX_FLAG_OTD BIT(14) +#define BQ27XXX_FLAG_OTC BIT(15) +#define BQ27XXX_FLAG_UT BIT(14) +#define BQ27XXX_FLAG_OT BIT(15) + +/* BQ27000 has different layout for Flags register */ +#define BQ27000_FLAG_EDVF BIT(0) /* Final End-of-Discharge-Voltage flag */ +#define BQ27000_FLAG_EDV1 BIT(1) /* First End-of-Discharge-Voltage flag */ +#define BQ27000_FLAG_CI BIT(4) /* Capacity Inaccurate flag */ +#define BQ27000_FLAG_FC BIT(5) +#define BQ27000_FLAG_CHGS BIT(7) /* Charge state flag */ + +#define BQ27XXX_RS (20) /* Resistor sense mOhm */ +#define BQ27XXX_POWER_CONSTANT (29200) /* 29.2 µV^2 * 1000 */ +#define BQ27XXX_CURRENT_CONSTANT (3570) /* 3.57 µV * 1000 */ + +struct bq27xxx_device_info; +struct bq27xxx_access_methods { + int (*read)(struct bq27xxx_device_info *di, u8 reg, bool single); +}; + +#define INVALID_REG_ADDR 0xff + +/* + * bq27xxx_reg_index - Register names + * + * These are indexes into a device's register mapping array. + */ +enum bq27xxx_reg_index { + BQ27XXX_REG_CTRL = 0, /* Control */ + BQ27XXX_REG_TEMP, /* Temperature */ + BQ27XXX_REG_INT_TEMP, /* Internal Temperature */ + BQ27XXX_REG_VOLT, /* Voltage */ + BQ27XXX_REG_AI, /* Average Current */ + BQ27XXX_REG_FLAGS, /* Flags */ + BQ27XXX_REG_TTE, /* Time-to-Empty */ + BQ27XXX_REG_TTF, /* Time-to-Full */ + BQ27XXX_REG_TTES, /* Time-to-Empty Standby */ + BQ27XXX_REG_TTECP, /* Time-to-Empty at Constant Power */ + BQ27XXX_REG_NAC, /* Nominal Available Capacity */ + BQ27XXX_REG_FCC, /* Full Charge Capacity */ + BQ27XXX_REG_CYCT, /* Cycle Count */ + BQ27XXX_REG_AE, /* Available Energy */ + BQ27XXX_REG_SOC, /* State-of-Charge */ + BQ27XXX_REG_DCAP, /* Design Capacity */ + BQ27XXX_REG_AP, /* Average Power */ +}; + +struct bq27xxx_reg_cache { + int temperature; + int time_to_empty; + int time_to_empty_avg; + int time_to_full; + int charge_full; + int cycle_count; + int capacity; + int energy; + int flags; + int power_avg; + int health; +}; + +struct bq27xxx_device_info { + struct device *dev; + int id; + enum bq27xxx_chip chip; + + struct bq27xxx_reg_cache cache; + int charge_design_full; + + unsigned long last_update; + struct delayed_work work; + + struct power_supply *bat; + + struct bq27xxx_access_methods bus; + + struct mutex lock; + + u8 *regs; +}; + +/* Register mappings */ +static u8 bq27000_regs[] = { + 0x00, /* CONTROL */ + 0x06, /* TEMP */ + INVALID_REG_ADDR, /* INT TEMP - NA*/ + 0x08, /* VOLT */ + 0x14, /* AVG CURR */ + 0x0a, /* FLAGS */ + 0x16, /* TTE */ + 0x18, /* TTF */ + 0x1c, /* TTES */ + 0x26, /* TTECP */ + 0x0c, /* NAC */ + 0x12, /* LMD(FCC) */ + 0x2a, /* CYCT */ + 0x22, /* AE */ + 0x0b, /* SOC(RSOC) */ + 0x76, /* DCAP(ILMD) */ + 0x24, /* AP */ +}; + +static u8 bq27010_regs[] = { + 0x00, /* CONTROL */ + 0x06, /* TEMP */ + INVALID_REG_ADDR, /* INT TEMP - NA*/ + 0x08, /* VOLT */ + 0x14, /* AVG CURR */ + 0x0a, /* FLAGS */ + 0x16, /* TTE */ + 0x18, /* TTF */ + 0x1c, /* TTES */ + 0x26, /* TTECP */ + 0x0c, /* NAC */ + 0x12, /* LMD(FCC) */ + 0x2a, /* CYCT */ + INVALID_REG_ADDR, /* AE - NA */ + 0x0b, /* SOC(RSOC) */ + 0x76, /* DCAP(ILMD) */ + INVALID_REG_ADDR, /* AP - NA */ +}; + +static u8 bq27500_regs[] = { + 0x00, /* CONTROL */ + 0x06, /* TEMP */ + 0x28, /* INT TEMP */ + 0x08, /* VOLT */ + 0x14, /* AVG CURR */ + 0x0a, /* FLAGS */ + 0x16, /* TTE */ + INVALID_REG_ADDR, /* TTF - NA */ + 0x1a, /* TTES */ + INVALID_REG_ADDR, /* TTECP - NA */ + 0x0c, /* NAC */ + 0x12, /* LMD(FCC) */ + 0x1e, /* CYCT */ + INVALID_REG_ADDR, /* AE - NA */ + 0x20, /* SOC(RSOC) */ + 0x2e, /* DCAP(ILMD) */ + INVALID_REG_ADDR, /* AP - NA */ +}; + +static u8 bq27530_regs[] = { + 0x00, /* CONTROL */ + 0x06, /* TEMP */ + 0x32, /* INT TEMP */ + 0x08, /* VOLT */ + 0x14, /* AVG CURR */ + 0x0a, /* FLAGS */ + 0x16, /* TTE */ + INVALID_REG_ADDR, /* TTF - NA */ + INVALID_REG_ADDR, /* TTES - NA */ + INVALID_REG_ADDR, /* TTECP - NA */ + 0x0c, /* NAC */ + 0x12, /* LMD(FCC) */ + 0x2a, /* CYCT */ + INVALID_REG_ADDR, /* AE - NA */ + 0x2c, /* SOC(RSOC) */ + INVALID_REG_ADDR, /* DCAP - NA */ + 0x24, /* AP */ +}; + +static u8 bq27541_regs[] = { + 0x00, /* CONTROL */ + 0x06, /* TEMP */ + 0x28, /* INT TEMP */ + 0x08, /* VOLT */ + 0x14, /* AVG CURR */ + 0x0a, /* FLAGS */ + 0x16, /* TTE */ + INVALID_REG_ADDR, /* TTF - NA */ + INVALID_REG_ADDR, /* TTES - NA */ + INVALID_REG_ADDR, /* TTECP - NA */ + 0x0c, /* NAC */ + 0x12, /* LMD(FCC) */ + 0x2a, /* CYCT */ + INVALID_REG_ADDR, /* AE - NA */ + 0x2c, /* SOC(RSOC) */ + 0x3c, /* DCAP */ + 0x76, /* AP */ +}; + +static u8 bq27545_regs[] = { + 0x00, /* CONTROL */ + 0x06, /* TEMP */ + 0x28, /* INT TEMP */ + 0x08, /* VOLT */ + 0x14, /* AVG CURR */ + 0x0a, /* FLAGS */ + 0x16, /* TTE */ + INVALID_REG_ADDR, /* TTF - NA */ + INVALID_REG_ADDR, /* TTES - NA */ + INVALID_REG_ADDR, /* TTECP - NA */ + 0x0c, /* NAC */ + 0x12, /* LMD(FCC) */ + 0x2a, /* CYCT */ + INVALID_REG_ADDR, /* AE - NA */ + 0x2c, /* SOC(RSOC) */ + INVALID_REG_ADDR, /* DCAP - NA */ + 0x24, /* AP */ +}; + +static u8 bq27421_regs[] = { + 0x00, /* CONTROL */ + 0x02, /* TEMP */ + 0x1e, /* INT TEMP */ + 0x04, /* VOLT */ + 0x10, /* AVG CURR */ + 0x06, /* FLAGS */ + INVALID_REG_ADDR, /* TTE - NA */ + INVALID_REG_ADDR, /* TTF - NA */ + INVALID_REG_ADDR, /* TTES - NA */ + INVALID_REG_ADDR, /* TTECP - NA */ + 0x08, /* NAC */ + 0x0e, /* FCC */ + INVALID_REG_ADDR, /* CYCT - NA */ + INVALID_REG_ADDR, /* AE - NA */ + 0x1c, /* SOC */ + 0x3c, /* DCAP */ + 0x18, /* AP */ +}; + +static u8 *bq27xxx_regs[] = { + [BQ27000] = bq27000_regs, + [BQ27010] = bq27010_regs, + [BQ27500] = bq27500_regs, + [BQ27530] = bq27530_regs, + [BQ27541] = bq27541_regs, + [BQ27545] = bq27545_regs, + [BQ27421] = bq27421_regs, +}; + +static enum power_supply_property bq27000_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27010_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27500_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27530_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27541_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27545_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property bq27421_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +#define BQ27XXX_PROP(_id, _prop) \ + [_id] = { \ + .props = _prop, \ + .size = ARRAY_SIZE(_prop), \ + } + +static struct { + enum power_supply_property *props; + size_t size; +} bq27xxx_battery_props[] = { + BQ27XXX_PROP(BQ27000, bq27000_battery_props), + BQ27XXX_PROP(BQ27010, bq27010_battery_props), + BQ27XXX_PROP(BQ27500, bq27500_battery_props), + BQ27XXX_PROP(BQ27530, bq27530_battery_props), + BQ27XXX_PROP(BQ27541, bq27541_battery_props), + BQ27XXX_PROP(BQ27545, bq27545_battery_props), + BQ27XXX_PROP(BQ27421, bq27421_battery_props), +}; + +static unsigned int poll_interval = 360; +module_param(poll_interval, uint, 0644); +MODULE_PARM_DESC(poll_interval, + "battery poll interval in seconds - 0 disables polling"); + +/* + * Common code for BQ27xxx devices + */ + +static inline int bq27xxx_read(struct bq27xxx_device_info *di, int reg_index, + bool single) +{ + /* Reports EINVAL for invalid/missing registers */ + if (!di || di->regs[reg_index] == INVALID_REG_ADDR) + return -EINVAL; + + return di->bus.read(di, di->regs[reg_index], single); +} + +/* + * Return the battery State-of-Charge + * Or < 0 if something fails. + */ +static int bq27xxx_battery_read_soc(struct bq27xxx_device_info *di) +{ + int soc; + + soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false); + + if (soc < 0) + dev_dbg(di->dev, "error reading State-of-Charge\n"); + + return soc; +} + +/* + * Return a battery charge value in µAh + * Or < 0 if something fails. + */ +static int bq27xxx_battery_read_charge(struct bq27xxx_device_info *di, u8 reg) +{ + int charge; + + charge = bq27xxx_read(di, reg, false); + if (charge < 0) { + dev_dbg(di->dev, "error reading charge register %02x: %d\n", + reg, charge); + return charge; + } + + if (di->chip == BQ27000 || di->chip == BQ27010) + charge *= BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS; + else + charge *= 1000; + + return charge; +} + +/* + * Return the battery Nominal available capacity in µAh + * Or < 0 if something fails. + */ +static inline int bq27xxx_battery_read_nac(struct bq27xxx_device_info *di) +{ + int flags; + + if (di->chip == BQ27000 || di->chip == BQ27010) { + flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true); + if (flags >= 0 && (flags & BQ27000_FLAG_CI)) + return -ENODATA; + } + + return bq27xxx_battery_read_charge(di, BQ27XXX_REG_NAC); +} + +/* + * Return the battery Full Charge Capacity in µAh + * Or < 0 if something fails. + */ +static inline int bq27xxx_battery_read_fcc(struct bq27xxx_device_info *di) +{ + return bq27xxx_battery_read_charge(di, BQ27XXX_REG_FCC); +} + +/* + * Return the Design Capacity in µAh + * Or < 0 if something fails. + */ +static int bq27xxx_battery_read_dcap(struct bq27xxx_device_info *di) +{ + int dcap; + + dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, false); + + if (dcap < 0) { + dev_dbg(di->dev, "error reading initial last measured discharge\n"); + return dcap; + } + + if (di->chip == BQ27000 || di->chip == BQ27010) + dcap *= BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS; + else + dcap *= 1000; + + return dcap; +} + +/* + * Return the battery Available energy in µWh + * Or < 0 if something fails. + */ +static int bq27xxx_battery_read_energy(struct bq27xxx_device_info *di) +{ + int ae; + + ae = bq27xxx_read(di, BQ27XXX_REG_AE, false); + if (ae < 0) { + dev_dbg(di->dev, "error reading available energy\n"); + return ae; + } + + if (di->chip == BQ27000 || di->chip == BQ27010) + ae *= BQ27XXX_POWER_CONSTANT / BQ27XXX_RS; + else + ae *= 1000; + + return ae; +} + +/* + * Return the battery temperature in tenths of degree Kelvin + * Or < 0 if something fails. + */ +static int bq27xxx_battery_read_temperature(struct bq27xxx_device_info *di) +{ + int temp; + + temp = bq27xxx_read(di, BQ27XXX_REG_TEMP, false); + if (temp < 0) { + dev_err(di->dev, "error reading temperature\n"); + return temp; + } + + if (di->chip == BQ27000 || di->chip == BQ27010) + temp = 5 * temp / 2; + + return temp; +} + +/* + * Return the battery Cycle count total + * Or < 0 if something fails. + */ +static int bq27xxx_battery_read_cyct(struct bq27xxx_device_info *di) +{ + int cyct; + + cyct = bq27xxx_read(di, BQ27XXX_REG_CYCT, false); + if (cyct < 0) + dev_err(di->dev, "error reading cycle count total\n"); + + return cyct; +} + +/* + * Read a time register. + * Return < 0 if something fails. + */ +static int bq27xxx_battery_read_time(struct bq27xxx_device_info *di, u8 reg) +{ + int tval; + + tval = bq27xxx_read(di, reg, false); + if (tval < 0) { + dev_dbg(di->dev, "error reading time register %02x: %d\n", + reg, tval); + return tval; + } + + if (tval == 65535) + return -ENODATA; + + return tval * 60; +} + +/* + * Read an average power register. + * Return < 0 if something fails. + */ +static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di) +{ + int tval; + + tval = bq27xxx_read(di, BQ27XXX_REG_AP, false); + if (tval < 0) { + dev_err(di->dev, "error reading average power register %02x: %d\n", + BQ27XXX_REG_AP, tval); + return tval; + } + + if (di->chip == BQ27000 || di->chip == BQ27010) + return (tval * BQ27XXX_POWER_CONSTANT) / BQ27XXX_RS; + else + return tval; +} + +/* + * Returns true if a battery over temperature condition is detected + */ +static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags) +{ + if (di->chip == BQ27500 || di->chip == BQ27541 || di->chip == BQ27545) + return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD); + if (di->chip == BQ27530 || di->chip == BQ27421) + return flags & BQ27XXX_FLAG_OT; + + return false; +} + +/* + * Returns true if a battery under temperature condition is detected + */ +static bool bq27xxx_battery_undertemp(struct bq27xxx_device_info *di, u16 flags) +{ + if (di->chip == BQ27530 || di->chip == BQ27421) + return flags & BQ27XXX_FLAG_UT; + + return false; +} + +/* + * Returns true if a low state of charge condition is detected + */ +static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags) +{ + if (di->chip == BQ27000 || di->chip == BQ27010) + return flags & (BQ27000_FLAG_EDV1 | BQ27000_FLAG_EDVF); + else + return flags & (BQ27XXX_FLAG_SOC1 | BQ27XXX_FLAG_SOCF); +} + +/* + * Read flag register. + * Return < 0 if something fails. + */ +static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di) +{ + int flags; + + flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, false); + if (flags < 0) { + dev_err(di->dev, "error reading flag register:%d\n", flags); + return flags; + } + + /* Unlikely but important to return first */ + if (unlikely(bq27xxx_battery_overtemp(di, flags))) + return POWER_SUPPLY_HEALTH_OVERHEAT; + if (unlikely(bq27xxx_battery_undertemp(di, flags))) + return POWER_SUPPLY_HEALTH_COLD; + if (unlikely(bq27xxx_battery_dead(di, flags))) + return POWER_SUPPLY_HEALTH_DEAD; + + return POWER_SUPPLY_HEALTH_GOOD; +} + +static void bq27xxx_battery_update(struct bq27xxx_device_info *di) +{ + struct bq27xxx_reg_cache cache = {0, }; + bool has_ci_flag = di->chip == BQ27000 || di->chip == BQ27010; + bool has_singe_flag = di->chip == BQ27000 || di->chip == BQ27010; + + cache.flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag); + if ((cache.flags & 0xff) == 0xff) + cache.flags = -1; /* read error */ + if (cache.flags >= 0) { + cache.temperature = bq27xxx_battery_read_temperature(di); + if (has_ci_flag && (cache.flags & BQ27000_FLAG_CI)) { + dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n"); + cache.capacity = -ENODATA; + cache.energy = -ENODATA; + cache.time_to_empty = -ENODATA; + cache.time_to_empty_avg = -ENODATA; + cache.time_to_full = -ENODATA; + cache.charge_full = -ENODATA; + cache.health = -ENODATA; + } else { + if (di->regs[BQ27XXX_REG_TTE] != INVALID_REG_ADDR) + cache.time_to_empty = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTE); + if (di->regs[BQ27XXX_REG_TTECP] != INVALID_REG_ADDR) + cache.time_to_empty_avg = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP); + if (di->regs[BQ27XXX_REG_TTF] != INVALID_REG_ADDR) + cache.time_to_full = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF); + cache.charge_full = bq27xxx_battery_read_fcc(di); + cache.capacity = bq27xxx_battery_read_soc(di); + if (di->regs[BQ27XXX_REG_AE] != INVALID_REG_ADDR) + cache.energy = bq27xxx_battery_read_energy(di); + cache.health = bq27xxx_battery_read_health(di); + } + if (di->regs[BQ27XXX_REG_CYCT] != INVALID_REG_ADDR) + cache.cycle_count = bq27xxx_battery_read_cyct(di); + if (di->regs[BQ27XXX_REG_AP] != INVALID_REG_ADDR) + cache.power_avg = bq27xxx_battery_read_pwr_avg(di); + + /* We only have to read charge design full once */ + if (di->charge_design_full <= 0) + di->charge_design_full = bq27xxx_battery_read_dcap(di); + } + + if (di->cache.capacity != cache.capacity) + power_supply_changed(di->bat); + + if (memcmp(&di->cache, &cache, sizeof(cache)) != 0) + di->cache = cache; + + di->last_update = jiffies; +} + +static void bq27xxx_battery_poll(struct work_struct *work) +{ + struct bq27xxx_device_info *di = + container_of(work, struct bq27xxx_device_info, + work.work); + + bq27xxx_battery_update(di); + + if (poll_interval > 0) { + /* The timer does not have to be accurate. */ + set_timer_slack(&di->work.timer, poll_interval * HZ / 4); + schedule_delayed_work(&di->work, poll_interval * HZ); + } +} + +/* + * Return the battery average current in µA + * Note that current can be negative signed as well + * Or 0 if something fails. + */ +static int bq27xxx_battery_current(struct bq27xxx_device_info *di, + union power_supply_propval *val) +{ + int curr; + int flags; + + curr = bq27xxx_read(di, BQ27XXX_REG_AI, false); + if (curr < 0) { + dev_err(di->dev, "error reading current\n"); + return curr; + } + + if (di->chip == BQ27000 || di->chip == BQ27010) { + flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, false); + if (flags & BQ27000_FLAG_CHGS) { + dev_dbg(di->dev, "negative current!\n"); + curr = -curr; + } + + val->intval = curr * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS; + } else { + /* Other gauges return signed value */ + val->intval = (int)((s16)curr) * 1000; + } + + return 0; +} + +static int bq27xxx_battery_status(struct bq27xxx_device_info *di, + union power_supply_propval *val) +{ + int status; + + if (di->chip == BQ27000 || di->chip == BQ27010) { + if (di->cache.flags & BQ27000_FLAG_FC) + status = POWER_SUPPLY_STATUS_FULL; + else if (di->cache.flags & BQ27000_FLAG_CHGS) + status = POWER_SUPPLY_STATUS_CHARGING; + else if (power_supply_am_i_supplied(di->bat)) + status = POWER_SUPPLY_STATUS_NOT_CHARGING; + else + status = POWER_SUPPLY_STATUS_DISCHARGING; + } else { + if (di->cache.flags & BQ27XXX_FLAG_FC) + status = POWER_SUPPLY_STATUS_FULL; + else if (di->cache.flags & BQ27XXX_FLAG_DSC) + status = POWER_SUPPLY_STATUS_DISCHARGING; + else + status = POWER_SUPPLY_STATUS_CHARGING; + } + + val->intval = status; + + return 0; +} + +static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di, + union power_supply_propval *val) +{ + int level; + + if (di->chip == BQ27000 || di->chip == BQ27010) { + if (di->cache.flags & BQ27000_FLAG_FC) + level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + else if (di->cache.flags & BQ27000_FLAG_EDV1) + level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + else if (di->cache.flags & BQ27000_FLAG_EDVF) + level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + else + level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + } else { + if (di->cache.flags & BQ27XXX_FLAG_FC) + level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + else if (di->cache.flags & BQ27XXX_FLAG_SOC1) + level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + else if (di->cache.flags & BQ27XXX_FLAG_SOCF) + level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + else + level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + } + + val->intval = level; + + return 0; +} + +/* + * Return the battery Voltage in millivolts + * Or < 0 if something fails. + */ +static int bq27xxx_battery_voltage(struct bq27xxx_device_info *di, + union power_supply_propval *val) +{ + int volt; + + volt = bq27xxx_read(di, BQ27XXX_REG_VOLT, false); + if (volt < 0) { + dev_err(di->dev, "error reading voltage\n"); + return volt; + } + + val->intval = volt * 1000; + + return 0; +} + +static int bq27xxx_simple_value(int value, + union power_supply_propval *val) +{ + if (value < 0) + return value; + + val->intval = value; + + return 0; +} + +static int bq27xxx_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct bq27xxx_device_info *di = power_supply_get_drvdata(psy); + + mutex_lock(&di->lock); + if (time_is_before_jiffies(di->last_update + 5 * HZ)) { + cancel_delayed_work_sync(&di->work); + bq27xxx_battery_poll(&di->work.work); + } + mutex_unlock(&di->lock); + + if (psp != POWER_SUPPLY_PROP_PRESENT && di->cache.flags < 0) + return -ENODEV; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + ret = bq27xxx_battery_status(di, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = bq27xxx_battery_voltage(di, val); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->cache.flags < 0 ? 0 : 1; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = bq27xxx_battery_current(di, val); + break; + case POWER_SUPPLY_PROP_CAPACITY: + ret = bq27xxx_simple_value(di->cache.capacity, val); + break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + ret = bq27xxx_battery_capacity_level(di, val); + break; + case POWER_SUPPLY_PROP_TEMP: + ret = bq27xxx_simple_value(di->cache.temperature, val); + if (ret == 0) + val->intval -= 2731; /* convert decidegree k to c */ + break; + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: + ret = bq27xxx_simple_value(di->cache.time_to_empty, val); + break; + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: + ret = bq27xxx_simple_value(di->cache.time_to_empty_avg, val); + break; + case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: + ret = bq27xxx_simple_value(di->cache.time_to_full, val); + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + ret = bq27xxx_simple_value(bq27xxx_battery_read_nac(di), val); + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + ret = bq27xxx_simple_value(di->cache.charge_full, val); + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + ret = bq27xxx_simple_value(di->charge_design_full, val); + break; + case POWER_SUPPLY_PROP_CYCLE_COUNT: + ret = bq27xxx_simple_value(di->cache.cycle_count, val); + break; + case POWER_SUPPLY_PROP_ENERGY_NOW: + ret = bq27xxx_simple_value(di->cache.energy, val); + break; + case POWER_SUPPLY_PROP_POWER_AVG: + ret = bq27xxx_simple_value(di->cache.power_avg, val); + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = bq27xxx_simple_value(di->cache.health, val); + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = BQ27XXX_MANUFACTURER; + break; + default: + return -EINVAL; + } + + return ret; +} + +static void bq27xxx_external_power_changed(struct power_supply *psy) +{ + struct bq27xxx_device_info *di = power_supply_get_drvdata(psy); + + cancel_delayed_work_sync(&di->work); + schedule_delayed_work(&di->work, 0); +} + +static int bq27xxx_powersupply_init(struct bq27xxx_device_info *di, + const char *name) +{ + int ret; + struct power_supply_desc *psy_desc; + struct power_supply_config psy_cfg = { .drv_data = di, }; + + psy_desc = devm_kzalloc(di->dev, sizeof(*psy_desc), GFP_KERNEL); + if (!psy_desc) + return -ENOMEM; + + psy_desc->name = name; + psy_desc->type = POWER_SUPPLY_TYPE_BATTERY; + psy_desc->properties = bq27xxx_battery_props[di->chip].props; + psy_desc->num_properties = bq27xxx_battery_props[di->chip].size; + psy_desc->get_property = bq27xxx_battery_get_property; + psy_desc->external_power_changed = bq27xxx_external_power_changed; + + INIT_DELAYED_WORK(&di->work, bq27xxx_battery_poll); + mutex_init(&di->lock); + + di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg); + if (IS_ERR(di->bat)) { + ret = PTR_ERR(di->bat); + dev_err(di->dev, "failed to register battery: %d\n", ret); + return ret; + } + + dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION); + + bq27xxx_battery_update(di); + + return 0; +} + +static void bq27xxx_powersupply_unregister(struct bq27xxx_device_info *di) +{ + /* + * power_supply_unregister call bq27xxx_battery_get_property which + * call bq27xxx_battery_poll. + * Make sure that bq27xxx_battery_poll will not call + * schedule_delayed_work again after unregister (which cause OOPS). + */ + poll_interval = 0; + + cancel_delayed_work_sync(&di->work); + + power_supply_unregister(di->bat); + + mutex_destroy(&di->lock); +} + +/* i2c specific code */ +#ifdef CONFIG_BATTERY_BQ27XXX_I2C + +/* If the system has several batteries we need a different name for each + * of them... + */ +static DEFINE_IDR(battery_id); +static DEFINE_MUTEX(battery_mutex); + +static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data) +{ + struct bq27xxx_device_info *di = data; + + bq27xxx_battery_update(di); + + return IRQ_HANDLED; +} + +static int bq27xxx_battery_i2c_read(struct bq27xxx_device_info *di, u8 reg, + bool single) +{ + struct i2c_client *client = to_i2c_client(di->dev); + struct i2c_msg msg[2]; + unsigned char data[2]; + int ret; + + if (!client->adapter) + return -ENODEV; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].buf = ® + msg[0].len = sizeof(reg); + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = data; + if (single) + msg[1].len = 1; + else + msg[1].len = 2; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret < 0) + return ret; + + if (!single) + ret = get_unaligned_le16(data); + else + ret = data[0]; + + return ret; +} + +static int bq27xxx_battery_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + char *name; + struct bq27xxx_device_info *di; + int num; + int retval = 0; + + /* Get new ID for the new battery device */ + mutex_lock(&battery_mutex); + num = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL); + mutex_unlock(&battery_mutex); + if (num < 0) + return num; + + name = devm_kasprintf(&client->dev, GFP_KERNEL, "%s-%d", id->name, num); + if (!name) { + retval = -ENOMEM; + goto batt_failed; + } + + di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL); + if (!di) { + retval = -ENOMEM; + goto batt_failed; + } + + di->id = num; + di->dev = &client->dev; + di->chip = id->driver_data; + di->bus.read = &bq27xxx_battery_i2c_read; + di->regs = bq27xxx_regs[di->chip]; + + retval = bq27xxx_powersupply_init(di, name); + if (retval) + goto batt_failed; + + /* Schedule a polling after about 1 min */ + schedule_delayed_work(&di->work, 60 * HZ); + + i2c_set_clientdata(client, di); + + if (client->irq) { + retval = devm_request_threaded_irq(&client->dev, client->irq, + NULL, bq27xxx_battery_irq_handler_thread, + IRQF_ONESHOT, + name, di); + if (retval) { + dev_err(&client->dev, + "Unable to register IRQ %d error %d\n", + client->irq, retval); + return retval; + } + } + + return 0; + +batt_failed: + mutex_lock(&battery_mutex); + idr_remove(&battery_id, num); + mutex_unlock(&battery_mutex); + + return retval; +} + +static int bq27xxx_battery_i2c_remove(struct i2c_client *client) +{ + struct bq27xxx_device_info *di = i2c_get_clientdata(client); + + bq27xxx_powersupply_unregister(di); + + mutex_lock(&battery_mutex); + idr_remove(&battery_id, di->id); + mutex_unlock(&battery_mutex); + + return 0; +} + +static const struct i2c_device_id bq27xxx_id[] = { + { "bq27200", BQ27000 }, + { "bq27210", BQ27010 }, + { "bq27500", BQ27500 }, + { "bq27510", BQ27500 }, + { "bq27520", BQ27500 }, + { "bq27530", BQ27530 }, + { "bq27531", BQ27530 }, + { "bq27541", BQ27541 }, + { "bq27542", BQ27541 }, + { "bq27546", BQ27541 }, + { "bq27742", BQ27541 }, + { "bq27545", BQ27545 }, + { "bq27421", BQ27421 }, + { "bq27425", BQ27421 }, + { "bq27441", BQ27421 }, + { "bq27621", BQ27421 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, bq27xxx_id); + +static struct i2c_driver bq27xxx_battery_i2c_driver = { + .driver = { + .name = "bq27xxx-battery", + }, + .probe = bq27xxx_battery_i2c_probe, + .remove = bq27xxx_battery_i2c_remove, + .id_table = bq27xxx_id, +}; + +static inline int bq27xxx_battery_i2c_init(void) +{ + int ret = i2c_add_driver(&bq27xxx_battery_i2c_driver); + + if (ret) + pr_err("Unable to register BQ27xxx i2c driver\n"); + + return ret; +} + +static inline void bq27xxx_battery_i2c_exit(void) +{ + i2c_del_driver(&bq27xxx_battery_i2c_driver); +} + +#else + +static inline int bq27xxx_battery_i2c_init(void) { return 0; } +static inline void bq27xxx_battery_i2c_exit(void) {}; + +#endif + +/* platform specific code */ +#ifdef CONFIG_BATTERY_BQ27XXX_PLATFORM + +static int bq27xxx_battery_platform_read(struct bq27xxx_device_info *di, u8 reg, + bool single) +{ + struct device *dev = di->dev; + struct bq27xxx_platform_data *pdata = dev->platform_data; + unsigned int timeout = 3; + int upper, lower; + int temp; + + if (!single) { + /* Make sure the value has not changed in between reading the + * lower and the upper part */ + upper = pdata->read(dev, reg + 1); + do { + temp = upper; + if (upper < 0) + return upper; + + lower = pdata->read(dev, reg); + if (lower < 0) + return lower; + + upper = pdata->read(dev, reg + 1); + } while (temp != upper && --timeout); + + if (timeout == 0) + return -EIO; + + return (upper << 8) | lower; + } + + return pdata->read(dev, reg); +} + +static int bq27xxx_battery_platform_probe(struct platform_device *pdev) +{ + struct bq27xxx_device_info *di; + struct bq27xxx_platform_data *pdata = pdev->dev.platform_data; + const char *name; + + if (!pdata) { + dev_err(&pdev->dev, "no platform_data supplied\n"); + return -EINVAL; + } + + if (!pdata->read) { + dev_err(&pdev->dev, "no hdq read callback supplied\n"); + return -EINVAL; + } + + if (!pdata->chip) { + dev_err(&pdev->dev, "no device supplied\n"); + return -EINVAL; + } + + di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); + if (!di) + return -ENOMEM; + + platform_set_drvdata(pdev, di); + + di->dev = &pdev->dev; + di->chip = pdata->chip; + di->regs = bq27xxx_regs[di->chip]; + + name = pdata->name ?: dev_name(&pdev->dev); + di->bus.read = &bq27xxx_battery_platform_read; + + return bq27xxx_powersupply_init(di, name); +} + +static int bq27xxx_battery_platform_remove(struct platform_device *pdev) +{ + struct bq27xxx_device_info *di = platform_get_drvdata(pdev); + + bq27xxx_powersupply_unregister(di); + + return 0; +} + +static struct platform_driver bq27xxx_battery_platform_driver = { + .probe = bq27xxx_battery_platform_probe, + .remove = bq27xxx_battery_platform_remove, + .driver = { + .name = "bq27000-battery", + }, +}; + +static inline int bq27xxx_battery_platform_init(void) +{ + int ret = platform_driver_register(&bq27xxx_battery_platform_driver); + + if (ret) + pr_err("Unable to register BQ27xxx platform driver\n"); + + return ret; +} + +static inline void bq27xxx_battery_platform_exit(void) +{ + platform_driver_unregister(&bq27xxx_battery_platform_driver); +} + +#else + +static inline int bq27xxx_battery_platform_init(void) { return 0; } +static inline void bq27xxx_battery_platform_exit(void) {}; + +#endif + +/* + * Module stuff + */ + +static int __init bq27xxx_battery_init(void) +{ + int ret; + + ret = bq27xxx_battery_i2c_init(); + if (ret) + return ret; + + ret = bq27xxx_battery_platform_init(); + if (ret) + bq27xxx_battery_i2c_exit(); + + return ret; +} +module_init(bq27xxx_battery_init); + +static void __exit bq27xxx_battery_exit(void) +{ + bq27xxx_battery_platform_exit(); + bq27xxx_battery_i2c_exit(); +} +module_exit(bq27xxx_battery_exit); + +#ifdef CONFIG_BATTERY_BQ27XXX_PLATFORM +MODULE_ALIAS("platform:bq27000-battery"); +#endif + +MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); +MODULE_DESCRIPTION("BQ27xxx battery monitor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c index 907293e6f2a4..1ea5d1aa268b 100644 --- a/drivers/power/charger-manager.c +++ b/drivers/power/charger-manager.c @@ -1581,8 +1581,10 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev) cables = devm_kzalloc(dev, sizeof(*cables) * chg_regs->num_cables, GFP_KERNEL); - if (!cables) + if (!cables) { + of_node_put(child); return ERR_PTR(-ENOMEM); + } chg_regs->cables = cables; diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c index 7e741f1d3cd5..042fb3dacb46 100644 --- a/drivers/power/lp8727_charger.c +++ b/drivers/power/lp8727_charger.c @@ -508,23 +508,23 @@ out: return param; } -static int lp8727_parse_dt(struct device *dev) +static struct lp8727_platform_data *lp8727_parse_dt(struct device *dev) { struct device_node *np = dev->of_node; struct device_node *child; struct lp8727_platform_data *pdata; const char *type; - /* If charging parameter is not defined, just skip parsing the dt */ - if (of_get_child_count(np) == 0) - goto out; - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) - return -ENOMEM; + return ERR_PTR(-ENOMEM); of_property_read_u32(np, "debounce-ms", &pdata->debounce_msec); + /* If charging parameter is not defined, just skip parsing the dt */ + if (of_get_child_count(np) == 0) + return pdata; + for_each_child_of_node(np, child) { of_property_read_string(child, "charger-type", &type); @@ -535,29 +535,30 @@ static int lp8727_parse_dt(struct device *dev) pdata->usb = lp8727_parse_charge_pdata(dev, child); } - dev->platform_data = pdata; -out: - return 0; + return pdata; } #else -static int lp8727_parse_dt(struct device *dev) +static struct lp8727_platform_data *lp8727_parse_dt(struct device *dev) { - return 0; + return NULL; } #endif static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id) { struct lp8727_chg *pchg; + struct lp8727_platform_data *pdata; int ret; if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) return -EIO; if (cl->dev.of_node) { - ret = lp8727_parse_dt(&cl->dev); - if (ret) - return ret; + pdata = lp8727_parse_dt(&cl->dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } else { + pdata = dev_get_platdata(&cl->dev); } pchg = devm_kzalloc(&cl->dev, sizeof(*pchg), GFP_KERNEL); @@ -566,7 +567,7 @@ static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id) pchg->client = cl; pchg->dev = &cl->dev; - pchg->pdata = cl->dev.platform_data; + pchg->pdata = pdata; i2c_set_clientdata(cl, pchg); mutex_init(&pchg->xfer_lock); diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c index e89255764745..9c65f134d447 100644 --- a/drivers/power/max17042_battery.c +++ b/drivers/power/max17042_battery.c @@ -909,18 +909,21 @@ static int max17042_probe(struct i2c_client *client, regmap_write(chip->regmap, MAX17042_LearnCFG, 0x0007); } - chip->battery = power_supply_register(&client->dev, max17042_desc, - &psy_cfg); + chip->battery = devm_power_supply_register(&client->dev, max17042_desc, + &psy_cfg); if (IS_ERR(chip->battery)) { dev_err(&client->dev, "failed: power supply register\n"); return PTR_ERR(chip->battery); } if (client->irq) { - ret = request_threaded_irq(client->irq, NULL, - max17042_thread_handler, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - chip->battery->desc->name, chip); + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, + max17042_thread_handler, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + chip->battery->desc->name, + chip); if (!ret) { regmap_update_bits(chip->regmap, MAX17042_CONFIG, CONFIG_ALRT_BIT_ENBL, @@ -944,16 +947,6 @@ static int max17042_probe(struct i2c_client *client, return 0; } -static int max17042_remove(struct i2c_client *client) -{ - struct max17042_chip *chip = i2c_get_clientdata(client); - - if (client->irq) - free_irq(client->irq, chip); - power_supply_unregister(chip->battery); - return 0; -} - #ifdef CONFIG_PM_SLEEP static int max17042_suspend(struct device *dev) { @@ -1014,7 +1007,6 @@ static struct i2c_driver max17042_i2c_driver = { .pm = &max17042_pm_ops, }, .probe = max17042_probe, - .remove = max17042_remove, .id_table = max17042_id, }; module_i2c_driver(max17042_i2c_driver); diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c index bf2b4b3a7cae..6d39d52040d4 100644 --- a/drivers/power/max8903_charger.c +++ b/drivers/power/max8903_charger.c @@ -201,8 +201,7 @@ static int max8903_probe(struct platform_device *pdev) if (pdata->dc_valid == false && pdata->usb_valid == false) { dev_err(dev, "No valid power sources.\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } if (pdata->dc_valid) { @@ -216,8 +215,7 @@ static int max8903_probe(struct platform_device *pdev) } else { dev_err(dev, "When DC is wired, DOK and DCM should" " be wired as well.\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } } else { if (pdata->dcm) { @@ -225,8 +223,7 @@ static int max8903_probe(struct platform_device *pdev) gpio_set_value(pdata->dcm, 0); else { dev_err(dev, "Invalid pin: dcm.\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } } } @@ -238,8 +235,7 @@ static int max8903_probe(struct platform_device *pdev) } else { dev_err(dev, "When USB is wired, UOK should be wired." "as well.\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } } @@ -248,32 +244,28 @@ static int max8903_probe(struct platform_device *pdev) gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1); } else { dev_err(dev, "Invalid pin: cen.\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } } if (pdata->chg) { if (!gpio_is_valid(pdata->chg)) { dev_err(dev, "Invalid pin: chg.\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } } if (pdata->flt) { if (!gpio_is_valid(pdata->flt)) { dev_err(dev, "Invalid pin: flt.\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } } if (pdata->usus) { if (!gpio_is_valid(pdata->usus)) { dev_err(dev, "Invalid pin: usus.\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } } @@ -291,85 +283,56 @@ static int max8903_probe(struct platform_device *pdev) psy_cfg.drv_data = data; - data->psy = power_supply_register(dev, &data->psy_desc, &psy_cfg); + data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg); if (IS_ERR(data->psy)) { dev_err(dev, "failed: power supply register.\n"); - ret = PTR_ERR(data->psy); - goto err; + return PTR_ERR(data->psy); } if (pdata->dc_valid) { - ret = request_threaded_irq(gpio_to_irq(pdata->dok), - NULL, max8903_dcin, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "MAX8903 DC IN", data); + ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->dok), + NULL, max8903_dcin, + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, + "MAX8903 DC IN", data); if (ret) { dev_err(dev, "Cannot request irq %d for DC (%d)\n", gpio_to_irq(pdata->dok), ret); - goto err_psy; + return ret; } } if (pdata->usb_valid) { - ret = request_threaded_irq(gpio_to_irq(pdata->uok), - NULL, max8903_usbin, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "MAX8903 USB IN", data); + ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->uok), + NULL, max8903_usbin, + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, + "MAX8903 USB IN", data); if (ret) { dev_err(dev, "Cannot request irq %d for USB (%d)\n", gpio_to_irq(pdata->uok), ret); - goto err_dc_irq; + return ret; } } if (pdata->flt) { - ret = request_threaded_irq(gpio_to_irq(pdata->flt), - NULL, max8903_fault, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "MAX8903 Fault", data); + ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->flt), + NULL, max8903_fault, + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, + "MAX8903 Fault", data); if (ret) { dev_err(dev, "Cannot request irq %d for Fault (%d)\n", gpio_to_irq(pdata->flt), ret); - goto err_usb_irq; + return ret; } } return 0; - -err_usb_irq: - if (pdata->usb_valid) - free_irq(gpio_to_irq(pdata->uok), data); -err_dc_irq: - if (pdata->dc_valid) - free_irq(gpio_to_irq(pdata->dok), data); -err_psy: - power_supply_unregister(data->psy); -err: - return ret; -} - -static int max8903_remove(struct platform_device *pdev) -{ - struct max8903_data *data = platform_get_drvdata(pdev); - - if (data) { - struct max8903_pdata *pdata = &data->pdata; - - if (pdata->flt) - free_irq(gpio_to_irq(pdata->flt), data); - if (pdata->usb_valid) - free_irq(gpio_to_irq(pdata->uok), data); - if (pdata->dc_valid) - free_irq(gpio_to_irq(pdata->dok), data); - power_supply_unregister(data->psy); - } - - return 0; } static struct platform_driver max8903_driver = { .probe = max8903_probe, - .remove = max8903_remove, .driver = { .name = "max8903-charger", }, diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c index 47448d4bc6cd..b64cf0f14142 100644 --- a/drivers/power/max8998_charger.c +++ b/drivers/power/max8998_charger.c @@ -117,8 +117,7 @@ static int max8998_battery_probe(struct platform_device *pdev) "EOC value not set: leave it unchanged.\n"); } else { dev_err(max8998->dev, "Invalid EOC value\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } /* Setup Charge Restart Level */ @@ -141,8 +140,7 @@ static int max8998_battery_probe(struct platform_device *pdev) break; default: dev_err(max8998->dev, "Invalid Restart Level\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } /* Setup Charge Full Timeout */ @@ -165,34 +163,22 @@ static int max8998_battery_probe(struct platform_device *pdev) break; default: dev_err(max8998->dev, "Invalid Full Timeout value\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } psy_cfg.drv_data = max8998; - max8998->battery = power_supply_register(max8998->dev, - &max8998_battery_desc, - &psy_cfg); + max8998->battery = devm_power_supply_register(max8998->dev, + &max8998_battery_desc, + &psy_cfg); if (IS_ERR(max8998->battery)) { ret = PTR_ERR(max8998->battery); dev_err(max8998->dev, "failed: power supply register: %d\n", ret); - goto err; + return ret; } return 0; -err: - return ret; -} - -static int max8998_battery_remove(struct platform_device *pdev) -{ - struct max8998_battery_data *max8998 = platform_get_drvdata(pdev); - - power_supply_unregister(max8998->battery); - - return 0; } static const struct platform_device_id max8998_battery_id[] = { @@ -205,7 +191,6 @@ static struct platform_driver max8998_battery_driver = { .name = "max8998-battery", }, .probe = max8998_battery_probe, - .remove = max8998_battery_remove, .id_table = max8998_battery_id, }; diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c index 3a45cc0c4dce..8f9bd1d0eeb6 100644 --- a/drivers/power/pm2301_charger.c +++ b/drivers/power/pm2301_charger.c @@ -1264,5 +1264,4 @@ module_exit(pm2xxx_charger_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay"); -MODULE_ALIAS("i2c:pm2xxx-charger"); MODULE_DESCRIPTION("PM2xxx charger management driver"); diff --git a/drivers/power/qcom_smbb.c b/drivers/power/qcom_smbb.c new file mode 100644 index 000000000000..5eb1e9e543e2 --- /dev/null +++ b/drivers/power/qcom_smbb.c @@ -0,0 +1,951 @@ +/* Copyright (c) 2014, Sony Mobile Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is for the multi-block Switch-Mode Battery Charger and Boost + * (SMBB) hardware, found in Qualcomm PM8941 PMICs. The charger is an + * integrated, single-cell lithium-ion battery charger. + * + * Sub-components: + * - Charger core + * - Buck + * - DC charge-path + * - USB charge-path + * - Battery interface + * - Boost (not implemented) + * - Misc + * - HF-Buck + */ + +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define SMBB_CHG_VMAX 0x040 +#define SMBB_CHG_VSAFE 0x041 +#define SMBB_CHG_CFG 0x043 +#define SMBB_CHG_IMAX 0x044 +#define SMBB_CHG_ISAFE 0x045 +#define SMBB_CHG_VIN_MIN 0x047 +#define SMBB_CHG_CTRL 0x049 +#define CTRL_EN BIT(7) +#define SMBB_CHG_VBAT_WEAK 0x052 +#define SMBB_CHG_IBAT_TERM_CHG 0x05b +#define IBAT_TERM_CHG_IEOC BIT(7) +#define IBAT_TERM_CHG_IEOC_BMS BIT(7) +#define IBAT_TERM_CHG_IEOC_CHG 0 +#define SMBB_CHG_VBAT_DET 0x05d +#define SMBB_CHG_TCHG_MAX_EN 0x060 +#define TCHG_MAX_EN BIT(7) +#define SMBB_CHG_WDOG_TIME 0x062 +#define SMBB_CHG_WDOG_EN 0x065 +#define WDOG_EN BIT(7) + +#define SMBB_BUCK_REG_MODE 0x174 +#define BUCK_REG_MODE BIT(0) +#define BUCK_REG_MODE_VBAT BIT(0) +#define BUCK_REG_MODE_VSYS 0 + +#define SMBB_BAT_PRES_STATUS 0x208 +#define PRES_STATUS_BAT_PRES BIT(7) +#define SMBB_BAT_TEMP_STATUS 0x209 +#define TEMP_STATUS_OK BIT(7) +#define TEMP_STATUS_HOT BIT(6) +#define SMBB_BAT_BTC_CTRL 0x249 +#define BTC_CTRL_COMP_EN BIT(7) +#define BTC_CTRL_COLD_EXT BIT(1) +#define BTC_CTRL_HOT_EXT_N BIT(0) + +#define SMBB_USB_IMAX 0x344 +#define SMBB_USB_ENUM_TIMER_STOP 0x34e +#define ENUM_TIMER_STOP BIT(0) +#define SMBB_USB_SEC_ACCESS 0x3d0 +#define SEC_ACCESS_MAGIC 0xa5 +#define SMBB_USB_REV_BST 0x3ed +#define REV_BST_CHG_GONE BIT(7) + +#define SMBB_DC_IMAX 0x444 + +#define SMBB_MISC_REV2 0x601 +#define SMBB_MISC_BOOT_DONE 0x642 +#define BOOT_DONE BIT(7) + +#define STATUS_USBIN_VALID BIT(0) /* USB connection is valid */ +#define STATUS_DCIN_VALID BIT(1) /* DC connection is valid */ +#define STATUS_BAT_HOT BIT(2) /* Battery temp 1=Hot, 0=Cold */ +#define STATUS_BAT_OK BIT(3) /* Battery temp OK */ +#define STATUS_BAT_PRESENT BIT(4) /* Battery is present */ +#define STATUS_CHG_DONE BIT(5) /* Charge cycle is complete */ +#define STATUS_CHG_TRKL BIT(6) /* Trickle charging */ +#define STATUS_CHG_FAST BIT(7) /* Fast charging */ +#define STATUS_CHG_GONE BIT(8) /* No charger is connected */ + +enum smbb_attr { + ATTR_BAT_ISAFE, + ATTR_BAT_IMAX, + ATTR_USBIN_IMAX, + ATTR_DCIN_IMAX, + ATTR_BAT_VSAFE, + ATTR_BAT_VMAX, + ATTR_BAT_VMIN, + ATTR_CHG_VDET, + ATTR_VIN_MIN, + _ATTR_CNT, +}; + +struct smbb_charger { + unsigned int revision; + unsigned int addr; + struct device *dev; + + bool dc_disabled; + bool jeita_ext_temp; + unsigned long status; + struct mutex statlock; + + unsigned int attr[_ATTR_CNT]; + + struct power_supply *usb_psy; + struct power_supply *dc_psy; + struct power_supply *bat_psy; + struct regmap *regmap; +}; + +static int smbb_vbat_weak_fn(unsigned int index) +{ + return 2100000 + index * 100000; +} + +static int smbb_vin_fn(unsigned int index) +{ + if (index > 42) + return 5600000 + (index - 43) * 200000; + return 3400000 + index * 50000; +} + +static int smbb_vmax_fn(unsigned int index) +{ + return 3240000 + index * 10000; +} + +static int smbb_vbat_det_fn(unsigned int index) +{ + return 3240000 + index * 20000; +} + +static int smbb_imax_fn(unsigned int index) +{ + if (index < 2) + return 100000 + index * 50000; + return index * 100000; +} + +static int smbb_bat_imax_fn(unsigned int index) +{ + return index * 50000; +} + +static unsigned int smbb_hw_lookup(unsigned int val, int (*fn)(unsigned int)) +{ + unsigned int widx; + unsigned int sel; + + for (widx = sel = 0; (*fn)(widx) <= val; ++widx) + sel = widx; + + return sel; +} + +static const struct smbb_charger_attr { + const char *name; + unsigned int reg; + unsigned int safe_reg; + unsigned int max; + unsigned int min; + unsigned int fail_ok; + int (*hw_fn)(unsigned int); +} smbb_charger_attrs[] = { + [ATTR_BAT_ISAFE] = { + .name = "qcom,fast-charge-safe-current", + .reg = SMBB_CHG_ISAFE, + .max = 3000000, + .min = 200000, + .hw_fn = smbb_bat_imax_fn, + .fail_ok = 1, + }, + [ATTR_BAT_IMAX] = { + .name = "qcom,fast-charge-current-limit", + .reg = SMBB_CHG_IMAX, + .safe_reg = SMBB_CHG_ISAFE, + .max = 3000000, + .min = 200000, + .hw_fn = smbb_bat_imax_fn, + }, + [ATTR_DCIN_IMAX] = { + .name = "qcom,dc-current-limit", + .reg = SMBB_DC_IMAX, + .max = 2500000, + .min = 100000, + .hw_fn = smbb_imax_fn, + }, + [ATTR_BAT_VSAFE] = { + .name = "qcom,fast-charge-safe-voltage", + .reg = SMBB_CHG_VSAFE, + .max = 5000000, + .min = 3240000, + .hw_fn = smbb_vmax_fn, + .fail_ok = 1, + }, + [ATTR_BAT_VMAX] = { + .name = "qcom,fast-charge-high-threshold-voltage", + .reg = SMBB_CHG_VMAX, + .safe_reg = SMBB_CHG_VSAFE, + .max = 5000000, + .min = 3240000, + .hw_fn = smbb_vmax_fn, + }, + [ATTR_BAT_VMIN] = { + .name = "qcom,fast-charge-low-threshold-voltage", + .reg = SMBB_CHG_VBAT_WEAK, + .max = 3600000, + .min = 2100000, + .hw_fn = smbb_vbat_weak_fn, + }, + [ATTR_CHG_VDET] = { + .name = "qcom,auto-recharge-threshold-voltage", + .reg = SMBB_CHG_VBAT_DET, + .max = 5000000, + .min = 3240000, + .hw_fn = smbb_vbat_det_fn, + }, + [ATTR_VIN_MIN] = { + .name = "qcom,minimum-input-voltage", + .reg = SMBB_CHG_VIN_MIN, + .max = 9600000, + .min = 4200000, + .hw_fn = smbb_vin_fn, + }, + [ATTR_USBIN_IMAX] = { + .name = "usb-charge-current-limit", + .reg = SMBB_USB_IMAX, + .max = 2500000, + .min = 100000, + .hw_fn = smbb_imax_fn, + }, +}; + +static int smbb_charger_attr_write(struct smbb_charger *chg, + enum smbb_attr which, unsigned int val) +{ + const struct smbb_charger_attr *prop; + unsigned int wval; + unsigned int out; + int rc; + + prop = &smbb_charger_attrs[which]; + + if (val > prop->max || val < prop->min) { + dev_err(chg->dev, "value out of range for %s [%u:%u]\n", + prop->name, prop->min, prop->max); + return -EINVAL; + } + + if (prop->safe_reg) { + rc = regmap_read(chg->regmap, + chg->addr + prop->safe_reg, &wval); + if (rc) { + dev_err(chg->dev, + "unable to read safe value for '%s'\n", + prop->name); + return rc; + } + + wval = prop->hw_fn(wval); + + if (val > wval) { + dev_warn(chg->dev, + "%s above safe value, clamping at %u\n", + prop->name, wval); + val = wval; + } + } + + wval = smbb_hw_lookup(val, prop->hw_fn); + + rc = regmap_write(chg->regmap, chg->addr + prop->reg, wval); + if (rc) { + dev_err(chg->dev, "unable to update %s", prop->name); + return rc; + } + out = prop->hw_fn(wval); + if (out != val) { + dev_warn(chg->dev, + "%s inaccurate, rounded to %u\n", + prop->name, out); + } + + dev_dbg(chg->dev, "%s <= %d\n", prop->name, out); + + chg->attr[which] = out; + + return 0; +} + +static int smbb_charger_attr_read(struct smbb_charger *chg, + enum smbb_attr which) +{ + const struct smbb_charger_attr *prop; + unsigned int val; + int rc; + + prop = &smbb_charger_attrs[which]; + + rc = regmap_read(chg->regmap, chg->addr + prop->reg, &val); + if (rc) { + dev_err(chg->dev, "failed to read %s\n", prop->name); + return rc; + } + val = prop->hw_fn(val); + dev_dbg(chg->dev, "%s => %d\n", prop->name, val); + + chg->attr[which] = val; + + return 0; +} + +static int smbb_charger_attr_parse(struct smbb_charger *chg, + enum smbb_attr which) +{ + const struct smbb_charger_attr *prop; + unsigned int val; + int rc; + + prop = &smbb_charger_attrs[which]; + + rc = of_property_read_u32(chg->dev->of_node, prop->name, &val); + if (rc == 0) { + rc = smbb_charger_attr_write(chg, which, val); + if (!rc || !prop->fail_ok) + return rc; + } + return smbb_charger_attr_read(chg, which); +} + +static void smbb_set_line_flag(struct smbb_charger *chg, int irq, int flag) +{ + bool state; + int ret; + + ret = irq_get_irqchip_state(irq, IRQCHIP_STATE_LINE_LEVEL, &state); + if (ret < 0) { + dev_err(chg->dev, "failed to read irq line\n"); + return; + } + + mutex_lock(&chg->statlock); + if (state) + chg->status |= flag; + else + chg->status &= ~flag; + mutex_unlock(&chg->statlock); + + dev_dbg(chg->dev, "status = %03lx\n", chg->status); +} + +static irqreturn_t smbb_usb_valid_handler(int irq, void *_data) +{ + struct smbb_charger *chg = _data; + + smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID); + power_supply_changed(chg->usb_psy); + + return IRQ_HANDLED; +} + +static irqreturn_t smbb_dc_valid_handler(int irq, void *_data) +{ + struct smbb_charger *chg = _data; + + smbb_set_line_flag(chg, irq, STATUS_DCIN_VALID); + if (!chg->dc_disabled) + power_supply_changed(chg->dc_psy); + + return IRQ_HANDLED; +} + +static irqreturn_t smbb_bat_temp_handler(int irq, void *_data) +{ + struct smbb_charger *chg = _data; + unsigned int val; + int rc; + + rc = regmap_read(chg->regmap, chg->addr + SMBB_BAT_TEMP_STATUS, &val); + if (rc) + return IRQ_HANDLED; + + mutex_lock(&chg->statlock); + if (val & TEMP_STATUS_OK) { + chg->status |= STATUS_BAT_OK; + } else { + chg->status &= ~STATUS_BAT_OK; + if (val & TEMP_STATUS_HOT) + chg->status |= STATUS_BAT_HOT; + } + mutex_unlock(&chg->statlock); + + power_supply_changed(chg->bat_psy); + return IRQ_HANDLED; +} + +static irqreturn_t smbb_bat_present_handler(int irq, void *_data) +{ + struct smbb_charger *chg = _data; + + smbb_set_line_flag(chg, irq, STATUS_BAT_PRESENT); + power_supply_changed(chg->bat_psy); + + return IRQ_HANDLED; +} + +static irqreturn_t smbb_chg_done_handler(int irq, void *_data) +{ + struct smbb_charger *chg = _data; + + smbb_set_line_flag(chg, irq, STATUS_CHG_DONE); + power_supply_changed(chg->bat_psy); + + return IRQ_HANDLED; +} + +static irqreturn_t smbb_chg_gone_handler(int irq, void *_data) +{ + struct smbb_charger *chg = _data; + + smbb_set_line_flag(chg, irq, STATUS_CHG_GONE); + power_supply_changed(chg->bat_psy); + power_supply_changed(chg->usb_psy); + if (!chg->dc_disabled) + power_supply_changed(chg->dc_psy); + + return IRQ_HANDLED; +} + +static irqreturn_t smbb_chg_fast_handler(int irq, void *_data) +{ + struct smbb_charger *chg = _data; + + smbb_set_line_flag(chg, irq, STATUS_CHG_FAST); + power_supply_changed(chg->bat_psy); + + return IRQ_HANDLED; +} + +static irqreturn_t smbb_chg_trkl_handler(int irq, void *_data) +{ + struct smbb_charger *chg = _data; + + smbb_set_line_flag(chg, irq, STATUS_CHG_TRKL); + power_supply_changed(chg->bat_psy); + + return IRQ_HANDLED; +} + +static const struct smbb_irq { + const char *name; + irqreturn_t (*handler)(int, void *); +} smbb_charger_irqs[] = { + { "chg-done", smbb_chg_done_handler }, + { "chg-fast", smbb_chg_fast_handler }, + { "chg-trkl", smbb_chg_trkl_handler }, + { "bat-temp-ok", smbb_bat_temp_handler }, + { "bat-present", smbb_bat_present_handler }, + { "chg-gone", smbb_chg_gone_handler }, + { "usb-valid", smbb_usb_valid_handler }, + { "dc-valid", smbb_dc_valid_handler }, +}; + +static int smbb_usbin_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct smbb_charger *chg = power_supply_get_drvdata(psy); + int rc = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + mutex_lock(&chg->statlock); + val->intval = !(chg->status & STATUS_CHG_GONE) && + (chg->status & STATUS_USBIN_VALID); + mutex_unlock(&chg->statlock); + break; + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: + val->intval = chg->attr[ATTR_USBIN_IMAX]; + break; + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: + val->intval = 2500000; + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static int smbb_usbin_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct smbb_charger *chg = power_supply_get_drvdata(psy); + int rc; + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: + rc = smbb_charger_attr_write(chg, ATTR_USBIN_IMAX, + val->intval); + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static int smbb_dcin_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct smbb_charger *chg = power_supply_get_drvdata(psy); + int rc = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + mutex_lock(&chg->statlock); + val->intval = !(chg->status & STATUS_CHG_GONE) && + (chg->status & STATUS_DCIN_VALID); + mutex_unlock(&chg->statlock); + break; + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: + val->intval = chg->attr[ATTR_DCIN_IMAX]; + break; + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: + val->intval = 2500000; + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static int smbb_dcin_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct smbb_charger *chg = power_supply_get_drvdata(psy); + int rc; + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: + rc = smbb_charger_attr_write(chg, ATTR_DCIN_IMAX, + val->intval); + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static int smbb_charger_writable_property(struct power_supply *psy, + enum power_supply_property psp) +{ + return psp == POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT; +} + +static int smbb_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct smbb_charger *chg = power_supply_get_drvdata(psy); + unsigned long status; + int rc = 0; + + mutex_lock(&chg->statlock); + status = chg->status; + mutex_unlock(&chg->statlock); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (status & STATUS_CHG_GONE) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (!(status & (STATUS_DCIN_VALID | STATUS_USBIN_VALID))) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (status & STATUS_CHG_DONE) + val->intval = POWER_SUPPLY_STATUS_FULL; + else if (!(status & STATUS_BAT_OK)) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (status & (STATUS_CHG_FAST | STATUS_CHG_TRKL)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else /* everything is ok for charging, but we are not... */ + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + case POWER_SUPPLY_PROP_HEALTH: + if (status & STATUS_BAT_OK) + val->intval = POWER_SUPPLY_HEALTH_GOOD; + else if (status & STATUS_BAT_HOT) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else + val->intval = POWER_SUPPLY_HEALTH_COLD; + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (status & STATUS_CHG_FAST) + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + else if (status & STATUS_CHG_TRKL) + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + else + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = !!(status & STATUS_BAT_PRESENT); + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + val->intval = chg->attr[ATTR_BAT_IMAX]; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + val->intval = chg->attr[ATTR_BAT_VMAX]; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + /* this charger is a single-cell lithium-ion battery charger + * only. If you hook up some other technology, there will be + * fireworks. + */ + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = 3000000; /* single-cell li-ion low end */ + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static int smbb_battery_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct smbb_charger *chg = power_supply_get_drvdata(psy); + int rc; + + switch (psp) { + case POWER_SUPPLY_PROP_CURRENT_MAX: + rc = smbb_charger_attr_write(chg, ATTR_BAT_IMAX, val->intval); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + rc = smbb_charger_attr_write(chg, ATTR_BAT_VMAX, val->intval); + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static int smbb_battery_writable_property(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_CURRENT_MAX: + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + return 1; + default: + return 0; + } +} + +static enum power_supply_property smbb_charger_properties[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, +}; + +static enum power_supply_property smbb_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_TECHNOLOGY, +}; + +static const struct reg_off_mask_default { + unsigned int offset; + unsigned int mask; + unsigned int value; + unsigned int rev_mask; +} smbb_charger_setup[] = { + /* The bootloader is supposed to set this... make sure anyway. */ + { SMBB_MISC_BOOT_DONE, BOOT_DONE, BOOT_DONE }, + + /* Disable software timer */ + { SMBB_CHG_TCHG_MAX_EN, TCHG_MAX_EN, 0 }, + + /* Clear and disable watchdog */ + { SMBB_CHG_WDOG_TIME, 0xff, 160 }, + { SMBB_CHG_WDOG_EN, WDOG_EN, 0 }, + + /* Use charger based EoC detection */ + { SMBB_CHG_IBAT_TERM_CHG, IBAT_TERM_CHG_IEOC, IBAT_TERM_CHG_IEOC_CHG }, + + /* Disable GSM PA load adjustment. + * The PA signal is incorrectly connected on v2. + */ + { SMBB_CHG_CFG, 0xff, 0x00, BIT(3) }, + + /* Use VBAT (not VSYS) to compensate for IR drop during fast charging */ + { SMBB_BUCK_REG_MODE, BUCK_REG_MODE, BUCK_REG_MODE_VBAT }, + + /* Enable battery temperature comparators */ + { SMBB_BAT_BTC_CTRL, BTC_CTRL_COMP_EN, BTC_CTRL_COMP_EN }, + + /* Stop USB enumeration timer */ + { SMBB_USB_ENUM_TIMER_STOP, ENUM_TIMER_STOP, ENUM_TIMER_STOP }, + +#if 0 /* FIXME supposedly only to disable hardware ARB termination */ + { SMBB_USB_SEC_ACCESS, SEC_ACCESS_MAGIC }, + { SMBB_USB_REV_BST, 0xff, REV_BST_CHG_GONE }, +#endif + + /* Stop USB enumeration timer, again */ + { SMBB_USB_ENUM_TIMER_STOP, ENUM_TIMER_STOP, ENUM_TIMER_STOP }, + + /* Enable charging */ + { SMBB_CHG_CTRL, CTRL_EN, CTRL_EN }, +}; + +static char *smbb_bif[] = { "smbb-bif" }; + +static const struct power_supply_desc bat_psy_desc = { + .name = "smbb-bif", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = smbb_battery_properties, + .num_properties = ARRAY_SIZE(smbb_battery_properties), + .get_property = smbb_battery_get_property, + .set_property = smbb_battery_set_property, + .property_is_writeable = smbb_battery_writable_property, +}; + +static const struct power_supply_desc usb_psy_desc = { + .name = "smbb-usbin", + .type = POWER_SUPPLY_TYPE_USB, + .properties = smbb_charger_properties, + .num_properties = ARRAY_SIZE(smbb_charger_properties), + .get_property = smbb_usbin_get_property, + .set_property = smbb_usbin_set_property, + .property_is_writeable = smbb_charger_writable_property, +}; + +static const struct power_supply_desc dc_psy_desc = { + .name = "smbb-dcin", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = smbb_charger_properties, + .num_properties = ARRAY_SIZE(smbb_charger_properties), + .get_property = smbb_dcin_get_property, + .set_property = smbb_dcin_set_property, + .property_is_writeable = smbb_charger_writable_property, +}; + +static int smbb_charger_probe(struct platform_device *pdev) +{ + struct power_supply_config bat_cfg = {}; + struct power_supply_config usb_cfg = {}; + struct power_supply_config dc_cfg = {}; + struct smbb_charger *chg; + int rc, i; + + chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL); + if (!chg) + return -ENOMEM; + + chg->dev = &pdev->dev; + mutex_init(&chg->statlock); + + chg->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!chg->regmap) { + dev_err(&pdev->dev, "failed to locate regmap\n"); + return -ENODEV; + } + + rc = of_property_read_u32(pdev->dev.of_node, "reg", &chg->addr); + if (rc) { + dev_err(&pdev->dev, "missing or invalid 'reg' property\n"); + return rc; + } + + rc = regmap_read(chg->regmap, chg->addr + SMBB_MISC_REV2, &chg->revision); + if (rc) { + dev_err(&pdev->dev, "unable to read revision\n"); + return rc; + } + + chg->revision += 1; + if (chg->revision != 2 && chg->revision != 3) { + dev_err(&pdev->dev, "v1 hardware not supported\n"); + return -ENODEV; + } + dev_info(&pdev->dev, "Initializing SMBB rev %u", chg->revision); + + chg->dc_disabled = of_property_read_bool(pdev->dev.of_node, "qcom,disable-dc"); + + for (i = 0; i < _ATTR_CNT; ++i) { + rc = smbb_charger_attr_parse(chg, i); + if (rc) { + dev_err(&pdev->dev, "failed to parse/apply settings\n"); + return rc; + } + } + + bat_cfg.drv_data = chg; + bat_cfg.of_node = pdev->dev.of_node; + chg->bat_psy = devm_power_supply_register(&pdev->dev, + &bat_psy_desc, + &bat_cfg); + if (IS_ERR(chg->bat_psy)) { + dev_err(&pdev->dev, "failed to register battery\n"); + return PTR_ERR(chg->bat_psy); + } + + usb_cfg.drv_data = chg; + usb_cfg.supplied_to = smbb_bif; + usb_cfg.num_supplicants = ARRAY_SIZE(smbb_bif); + chg->usb_psy = devm_power_supply_register(&pdev->dev, + &usb_psy_desc, + &usb_cfg); + if (IS_ERR(chg->usb_psy)) { + dev_err(&pdev->dev, "failed to register USB power supply\n"); + return PTR_ERR(chg->usb_psy); + } + + if (!chg->dc_disabled) { + dc_cfg.drv_data = chg; + dc_cfg.supplied_to = smbb_bif; + dc_cfg.num_supplicants = ARRAY_SIZE(smbb_bif); + chg->dc_psy = devm_power_supply_register(&pdev->dev, + &dc_psy_desc, + &dc_cfg); + if (IS_ERR(chg->dc_psy)) { + dev_err(&pdev->dev, "failed to register DC power supply\n"); + return PTR_ERR(chg->dc_psy); + } + } + + for (i = 0; i < ARRAY_SIZE(smbb_charger_irqs); ++i) { + int irq; + + irq = platform_get_irq_byname(pdev, smbb_charger_irqs[i].name); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get irq '%s'\n", + smbb_charger_irqs[i].name); + return irq; + } + + smbb_charger_irqs[i].handler(irq, chg); + + rc = devm_request_threaded_irq(&pdev->dev, irq, NULL, + smbb_charger_irqs[i].handler, IRQF_ONESHOT, + smbb_charger_irqs[i].name, chg); + if (rc) { + dev_err(&pdev->dev, "failed to request irq '%s'\n", + smbb_charger_irqs[i].name); + return rc; + } + } + + chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node, + "qcom,jeita-extended-temp-range"); + + /* Set temperature range to [35%:70%] or [25%:80%] accordingly */ + rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_BAT_BTC_CTRL, + BTC_CTRL_COLD_EXT | BTC_CTRL_HOT_EXT_N, + chg->jeita_ext_temp ? + BTC_CTRL_COLD_EXT : + BTC_CTRL_HOT_EXT_N); + if (rc) { + dev_err(&pdev->dev, + "unable to set %s temperature range\n", + chg->jeita_ext_temp ? "JEITA extended" : "normal"); + return rc; + } + + for (i = 0; i < ARRAY_SIZE(smbb_charger_setup); ++i) { + const struct reg_off_mask_default *r = &smbb_charger_setup[i]; + + if (r->rev_mask & BIT(chg->revision)) + continue; + + rc = regmap_update_bits(chg->regmap, chg->addr + r->offset, + r->mask, r->value); + if (rc) { + dev_err(&pdev->dev, + "unable to initializing charging, bailing\n"); + return rc; + } + } + + platform_set_drvdata(pdev, chg); + + return 0; +} + +static int smbb_charger_remove(struct platform_device *pdev) +{ + struct smbb_charger *chg; + + chg = platform_get_drvdata(pdev); + + regmap_update_bits(chg->regmap, chg->addr + SMBB_CHG_CTRL, CTRL_EN, 0); + + return 0; +} + +static const struct of_device_id smbb_charger_id_table[] = { + { .compatible = "qcom,pm8941-charger" }, + { } +}; +MODULE_DEVICE_TABLE(of, smbb_charger_id_table); + +static struct platform_driver smbb_charger_driver = { + .probe = smbb_charger_probe, + .remove = smbb_charger_remove, + .driver = { + .name = "qcom-smbb", + .of_match_table = smbb_charger_id_table, + }, +}; +module_platform_driver(smbb_charger_driver); + +MODULE_DESCRIPTION("Qualcomm Switch-Mode Battery Charger and Boost driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 5a0189bf19bb..1131cf75acc6 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -15,7 +15,7 @@ config POWER_RESET_AS3722 This driver supports turning off board via a ams AS3722 power-off. config POWER_RESET_AT91_POWEROFF - bool "Atmel AT91 poweroff driver" + tristate "Atmel AT91 poweroff driver" depends on ARCH_AT91 default SOC_AT91SAM9 || SOC_SAMA5 help @@ -23,7 +23,7 @@ config POWER_RESET_AT91_POWEROFF SoCs config POWER_RESET_AT91_RESET - bool "Atmel AT91 reset driver" + tristate "Atmel AT91 reset driver" depends on ARCH_AT91 default SOC_AT91SAM9 || SOC_SAMA5 help diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c index 9847cfb7e23d..e9e24df35f26 100644 --- a/drivers/power/reset/at91-poweroff.c +++ b/drivers/power/reset/at91-poweroff.c @@ -10,6 +10,7 @@ * warranty of any kind, whether express or implied. */ +#include <linux/clk.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> @@ -48,6 +49,7 @@ static const char *shdwc_wakeup_modes[] = { }; static void __iomem *at91_shdwc_base; +static struct clk *sclk; static void __init at91_wakeup_status(void) { @@ -119,9 +121,10 @@ static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev) writel(wakeup_mode | mode, at91_shdwc_base + AT91_SHDW_MR); } -static int at91_poweroff_probe(struct platform_device *pdev) +static int __init at91_poweroff_probe(struct platform_device *pdev) { struct resource *res; + int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res); @@ -130,6 +133,16 @@ static int at91_poweroff_probe(struct platform_device *pdev) return PTR_ERR(at91_shdwc_base); } + sclk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(sclk)) + return PTR_ERR(sclk); + + ret = clk_prepare_enable(sclk); + if (ret) { + dev_err(&pdev->dev, "Could not enable slow clock\n"); + return ret; + } + at91_wakeup_status(); if (pdev->dev.of_node) @@ -140,6 +153,16 @@ static int at91_poweroff_probe(struct platform_device *pdev) return 0; } +static int __exit at91_poweroff_remove(struct platform_device *pdev) +{ + if (pm_power_off == at91_poweroff) + pm_power_off = NULL; + + clk_disable_unprepare(sclk); + + return 0; +} + static const struct of_device_id at91_poweroff_of_match[] = { { .compatible = "atmel,at91sam9260-shdwc", }, { .compatible = "atmel,at91sam9rl-shdwc", }, @@ -148,10 +171,14 @@ static const struct of_device_id at91_poweroff_of_match[] = { }; static struct platform_driver at91_poweroff_driver = { - .probe = at91_poweroff_probe, + .remove = __exit_p(at91_poweroff_remove), .driver = { .name = "at91-poweroff", .of_match_table = at91_poweroff_of_match, }, }; -module_platform_driver(at91_poweroff_driver); +module_platform_driver_probe(at91_poweroff_driver, at91_poweroff_probe); + +MODULE_AUTHOR("Atmel Corporation"); +MODULE_DESCRIPTION("Shutdown driver for Atmel SoCs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c index c378d4ec826f..3f6b5dd7c3d4 100644 --- a/drivers/power/reset/at91-reset.c +++ b/drivers/power/reset/at91-reset.c @@ -1,5 +1,5 @@ /* - * Atmel AT91 SAM9 SoCs reset code + * Atmel AT91 SAM9 & SAMA5 SoCs reset code * * Copyright (C) 2007 Atmel Corporation. * Copyright (C) BitBox Ltd 2010 @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include <linux/clk.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of_address.h> @@ -46,6 +47,7 @@ enum reset_type { }; static void __iomem *at91_ramc_base[2], *at91_rstc_base; +static struct clk *sclk; /* * unless the SDRAM is cleanly shutdown before we hit the @@ -178,11 +180,11 @@ static struct notifier_block at91_restart_nb = { .priority = 192, }; -static int at91_reset_of_probe(struct platform_device *pdev) +static int __init at91_reset_probe(struct platform_device *pdev) { const struct of_device_id *match; struct device_node *np; - int idx = 0; + int ret, idx = 0; at91_rstc_base = of_iomap(pdev->dev.of_node, 0); if (!at91_rstc_base) { @@ -204,53 +206,32 @@ static int at91_reset_of_probe(struct platform_device *pdev) match = of_match_node(at91_reset_of_match, pdev->dev.of_node); at91_restart_nb.notifier_call = match->data; - return register_restart_handler(&at91_restart_nb); -} -static int at91_reset_platform_probe(struct platform_device *pdev) -{ - const struct platform_device_id *match; - struct resource *res; - int idx = 0; + sclk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(sclk)) + return PTR_ERR(sclk); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - at91_rstc_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(at91_rstc_base)) { - dev_err(&pdev->dev, "Could not map reset controller address\n"); - return PTR_ERR(at91_rstc_base); + ret = clk_prepare_enable(sclk); + if (ret) { + dev_err(&pdev->dev, "Could not enable slow clock\n"); + return ret; } - for (idx = 0; idx < 2; idx++) { - res = platform_get_resource(pdev, IORESOURCE_MEM, idx + 1 ); - at91_ramc_base[idx] = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); - if (!at91_ramc_base[idx]) { - dev_err(&pdev->dev, "Could not map ram controller address\n"); - return -ENOMEM; - } + ret = register_restart_handler(&at91_restart_nb); + if (ret) { + clk_disable_unprepare(sclk); + return ret; } - match = platform_get_device_id(pdev); - at91_restart_nb.notifier_call = - (int (*)(struct notifier_block *, - unsigned long, void *)) match->driver_data; + at91_reset_status(pdev); - return register_restart_handler(&at91_restart_nb); + return 0; } -static int at91_reset_probe(struct platform_device *pdev) +static int __exit at91_reset_remove(struct platform_device *pdev) { - int ret; - - if (pdev->dev.of_node) - ret = at91_reset_of_probe(pdev); - else - ret = at91_reset_platform_probe(pdev); - - if (ret) - return ret; - - at91_reset_status(pdev); + unregister_restart_handler(&at91_restart_nb); + clk_disable_unprepare(sclk); return 0; } @@ -262,11 +243,15 @@ static const struct platform_device_id at91_reset_plat_match[] = { }; static struct platform_driver at91_reset_driver = { - .probe = at91_reset_probe, + .remove = __exit_p(at91_reset_remove), .driver = { .name = "at91-reset", .of_match_table = at91_reset_of_match, }, .id_table = at91_reset_plat_match, }; -module_platform_driver(at91_reset_driver); +module_platform_driver_probe(at91_reset_driver, at91_reset_probe); + +MODULE_AUTHOR("Atmel Corporation"); +MODULE_DESCRIPTION("Reset driver for Atmel SoCs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/rt9455_charger.c b/drivers/power/rt9455_charger.c index a49a9d44bdda..cfdbde9daf94 100644 --- a/drivers/power/rt9455_charger.c +++ b/drivers/power/rt9455_charger.c @@ -1760,5 +1760,4 @@ module_i2c_driver(rt9455_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Anda-Maria Nicolae <anda-maria.nicolae@intel.com>"); -MODULE_ALIAS("i2c:rt9455-charger"); MODULE_DESCRIPTION("Richtek RT9455 Charger Driver"); diff --git a/drivers/power/smb347-charger.c b/drivers/power/smb347-charger.c index 0b60a0b5878b..072c5189bd6d 100644 --- a/drivers/power/smb347-charger.c +++ b/drivers/power/smb347-charger.c @@ -1332,4 +1332,3 @@ MODULE_AUTHOR("Bruce E. Robertson <bruce.e.robertson@intel.com>"); MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); MODULE_DESCRIPTION("SMB347 battery charger driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("i2c:smb347"); diff --git a/drivers/power/tps65090-charger.c b/drivers/power/tps65090-charger.c index 7e8fbd29c30e..1b4b5e09538e 100644 --- a/drivers/power/tps65090-charger.c +++ b/drivers/power/tps65090-charger.c @@ -353,6 +353,7 @@ static const struct of_device_id of_tps65090_charger_match[] = { { .compatible = "ti,tps65090-charger", }, { /* end */ } }; +MODULE_DEVICE_TABLE(of, of_tps65090_charger_match); static struct platform_driver tps65090_charger_driver = { .driver = { diff --git a/drivers/power/tps65217_charger.c b/drivers/power/tps65217_charger.c new file mode 100644 index 000000000000..d9f56730c735 --- /dev/null +++ b/drivers/power/tps65217_charger.c @@ -0,0 +1,264 @@ +/* + * Battery charger driver for TI's tps65217 + * + * Copyright (c) 2015, Collabora Ltd. + + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * Battery charger driver for TI's tps65217 + */ +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/power_supply.h> + +#include <linux/mfd/core.h> +#include <linux/mfd/tps65217.h> + +#define POLL_INTERVAL (HZ * 2) + +struct tps65217_charger { + struct tps65217 *tps; + struct device *dev; + struct power_supply *ac; + + int ac_online; + int prev_ac_online; + + struct task_struct *poll_task; +}; + +static enum power_supply_property tps65217_ac_props[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int tps65217_config_charger(struct tps65217_charger *charger) +{ + int ret; + + dev_dbg(charger->dev, "%s\n", __func__); + + /* + * tps65217 rev. G, p. 31 (see p. 32 for NTC schematic) + * + * The device can be configured to support a 100k NTC (B = 3960) by + * setting the the NTC_TYPE bit in register CHGCONFIG1 to 1. However it + * is not recommended to do so. In sleep mode, the charger continues + * charging the battery, but all register values are reset to default + * values. Therefore, the charger would get the wrong temperature + * information. If 100k NTC setting is required, please contact the + * factory. + * + * ATTENTION, conflicting information, from p. 46 + * + * NTC TYPE (for battery temperature measurement) + * 0 – 100k (curve 1, B = 3960) + * 1 – 10k (curve 2, B = 3480) (default on reset) + * + */ + ret = tps65217_clear_bits(charger->tps, TPS65217_REG_CHGCONFIG1, + TPS65217_CHGCONFIG1_NTC_TYPE, + TPS65217_PROTECT_NONE); + if (ret) { + dev_err(charger->dev, + "failed to set 100k NTC setting: %d\n", ret); + return ret; + } + + return 0; +} + +static int tps65217_enable_charging(struct tps65217_charger *charger) +{ + int ret; + + /* charger already enabled */ + if (charger->ac_online) + return 0; + + dev_dbg(charger->dev, "%s: enable charging\n", __func__); + ret = tps65217_set_bits(charger->tps, TPS65217_REG_CHGCONFIG1, + TPS65217_CHGCONFIG1_CHG_EN, + TPS65217_CHGCONFIG1_CHG_EN, + TPS65217_PROTECT_NONE); + if (ret) { + dev_err(charger->dev, + "%s: Error in writing CHG_EN in reg 0x%x: %d\n", + __func__, TPS65217_REG_CHGCONFIG1, ret); + return ret; + } + + charger->ac_online = 1; + + return 0; +} + +static int tps65217_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct tps65217_charger *charger = power_supply_get_drvdata(psy); + + if (psp == POWER_SUPPLY_PROP_ONLINE) { + val->intval = charger->ac_online; + return 0; + } + return -EINVAL; +} + +static irqreturn_t tps65217_charger_irq(int irq, void *dev) +{ + int ret, val; + struct tps65217_charger *charger = dev; + + charger->prev_ac_online = charger->ac_online; + + ret = tps65217_reg_read(charger->tps, TPS65217_REG_STATUS, &val); + if (ret < 0) { + dev_err(charger->dev, "%s: Error in reading reg 0x%x\n", + __func__, TPS65217_REG_STATUS); + return IRQ_HANDLED; + } + + dev_dbg(charger->dev, "%s: 0x%x\n", __func__, val); + + /* check for AC status bit */ + if (val & TPS65217_STATUS_ACPWR) { + ret = tps65217_enable_charging(charger); + if (ret) { + dev_err(charger->dev, + "failed to enable charger: %d\n", ret); + return IRQ_HANDLED; + } + } else { + charger->ac_online = 0; + } + + if (charger->prev_ac_online != charger->ac_online) + power_supply_changed(charger->ac); + + ret = tps65217_reg_read(charger->tps, TPS65217_REG_CHGCONFIG0, &val); + if (ret < 0) { + dev_err(charger->dev, "%s: Error in reading reg 0x%x\n", + __func__, TPS65217_REG_CHGCONFIG0); + return IRQ_HANDLED; + } + + if (val & TPS65217_CHGCONFIG0_ACTIVE) + dev_dbg(charger->dev, "%s: charger is charging\n", __func__); + else + dev_dbg(charger->dev, + "%s: charger is NOT charging\n", __func__); + + return IRQ_HANDLED; +} + +static int tps65217_charger_poll_task(void *data) +{ + set_freezable(); + + while (!kthread_should_stop()) { + schedule_timeout_interruptible(POLL_INTERVAL); + try_to_freeze(); + tps65217_charger_irq(-1, data); + } + return 0; +} + +static const struct power_supply_desc tps65217_charger_desc = { + .name = "tps65217-ac", + .type = POWER_SUPPLY_TYPE_MAINS, + .get_property = tps65217_ac_get_property, + .properties = tps65217_ac_props, + .num_properties = ARRAY_SIZE(tps65217_ac_props), +}; + +static int tps65217_charger_probe(struct platform_device *pdev) +{ + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct tps65217_charger *charger; + int ret; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); + if (!charger) + return -ENOMEM; + + charger->tps = tps; + charger->dev = &pdev->dev; + + charger->ac = devm_power_supply_register(&pdev->dev, + &tps65217_charger_desc, + NULL); + if (IS_ERR(charger->ac)) { + dev_err(&pdev->dev, "failed: power supply register\n"); + return PTR_ERR(charger->ac); + } + + ret = tps65217_config_charger(charger); + if (ret < 0) { + dev_err(charger->dev, "charger config failed, err %d\n", ret); + return ret; + } + + charger->poll_task = kthread_run(tps65217_charger_poll_task, + charger, "ktps65217charger"); + if (IS_ERR(charger->poll_task)) { + ret = PTR_ERR(charger->poll_task); + dev_err(charger->dev, "Unable to run kthread err %d\n", ret); + return ret; + } + + return 0; +} + +static int tps65217_charger_remove(struct platform_device *pdev) +{ + struct tps65217_charger *charger = platform_get_drvdata(pdev); + + kthread_stop(charger->poll_task); + + return 0; +} + +static const struct of_device_id tps65217_charger_match_table[] = { + { .compatible = "ti,tps65217-charger", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, tps65217_charger_match_table); + +static struct platform_driver tps65217_charger_driver = { + .probe = tps65217_charger_probe, + .remove = tps65217_charger_remove, + .driver = { + .name = "tps65217-charger", + .of_match_table = of_match_ptr(tps65217_charger_match_table), + }, + +}; +module_platform_driver(tps65217_charger_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@collabora.com>"); +MODULE_DESCRIPTION("TPS65217 battery charger driver"); diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c index 74f2d3ff1d7c..bcd4dc304f27 100644 --- a/drivers/power/twl4030_charger.c +++ b/drivers/power/twl4030_charger.c @@ -22,7 +22,7 @@ #include <linux/power_supply.h> #include <linux/notifier.h> #include <linux/usb/otg.h> -#include <linux/i2c/twl4030-madc.h> +#include <linux/iio/consumer.h> #define TWL4030_BCIMDEN 0x00 #define TWL4030_BCIMDKEY 0x01 @@ -91,21 +91,23 @@ #define TWL4030_MSTATEC_COMPLETE1 0x0b #define TWL4030_MSTATEC_COMPLETE4 0x0e -#if IS_REACHABLE(CONFIG_TWL4030_MADC) /* * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11) * then AC is available. */ -static inline int ac_available(void) +static inline int ac_available(struct iio_channel *channel_vac) { - return twl4030_get_madc_conversion(11) > 4500; -} -#else -static inline int ac_available(void) -{ - return 0; + int val, err; + + if (!channel_vac) + return 0; + + err = iio_read_channel_processed(channel_vac, &val); + if (err < 0) + return 0; + return val > 4500; } -#endif + static bool allow_usb; module_param(allow_usb, bool, 0644); MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current"); @@ -128,6 +130,7 @@ struct twl4030_bci { */ unsigned int ichg_eoc, ichg_lo, ichg_hi; unsigned int usb_cur, ac_cur; + struct iio_channel *channel_vac; bool ac_is_active; int usb_mode, ac_mode; /* charging mode requested */ #define CHARGE_OFF 0 @@ -278,7 +281,7 @@ static int twl4030_charger_update_current(struct twl4030_bci *bci) * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11) * and AC is enabled, set current for 'ac' */ - if (ac_available()) { + if (ac_available(bci->channel_vac)) { cur = bci->ac_cur; bci->ac_is_active = true; } else { @@ -1048,6 +1051,12 @@ static int twl4030_bci_probe(struct platform_device *pdev) return ret; } + bci->channel_vac = iio_channel_get(&pdev->dev, "vac"); + if (IS_ERR(bci->channel_vac)) { + bci->channel_vac = NULL; + dev_warn(&pdev->dev, "could not request vac iio channel"); + } + INIT_WORK(&bci->work, twl4030_bci_usb_work); INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker); @@ -1069,7 +1078,7 @@ static int twl4030_bci_probe(struct platform_device *pdev) TWL4030_INTERRUPTS_BCIIMR1A); if (ret < 0) { dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret); - return ret; + goto fail; } reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV); @@ -1102,6 +1111,10 @@ static int twl4030_bci_probe(struct platform_device *pdev) twl4030_charger_enable_backup(0, 0); return 0; +fail: + iio_channel_release(bci->channel_vac); + + return ret; } static int __exit twl4030_bci_remove(struct platform_device *pdev) @@ -1112,6 +1125,8 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev) twl4030_charger_enable_usb(bci, false); twl4030_charger_enable_backup(0, 0); + iio_channel_release(bci->channel_vac); + device_remove_file(&bci->usb->dev, &dev_attr_max_current); device_remove_file(&bci->usb->dev, &dev_attr_mode); device_remove_file(&bci->ac->dev, &dev_attr_max_current); diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c index db11ae6599f3..7082301da945 100644 --- a/drivers/power/wm831x_power.c +++ b/drivers/power/wm831x_power.c @@ -499,7 +499,8 @@ static int wm831x_power_probe(struct platform_device *pdev) struct wm831x_power *power; int ret, irq, i; - power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL); + power = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_power), + GFP_KERNEL); if (power == NULL) return -ENOMEM; @@ -536,7 +537,7 @@ static int wm831x_power_probe(struct platform_device *pdev) NULL); if (IS_ERR(power->wall)) { ret = PTR_ERR(power->wall); - goto err_kmalloc; + goto err; } power->usb_desc.name = power->usb_name, @@ -572,7 +573,7 @@ static int wm831x_power_probe(struct platform_device *pdev) irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO")); ret = request_threaded_irq(irq, NULL, wm831x_syslo_irq, - IRQF_TRIGGER_RISING, "System power low", + IRQF_TRIGGER_RISING | IRQF_ONESHOT, "System power low", power); if (ret != 0) { dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n", @@ -582,7 +583,7 @@ static int wm831x_power_probe(struct platform_device *pdev) irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC")); ret = request_threaded_irq(irq, NULL, wm831x_pwr_src_irq, - IRQF_TRIGGER_RISING, "Power source", + IRQF_TRIGGER_RISING | IRQF_ONESHOT, "Power source", power); if (ret != 0) { dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n", @@ -595,7 +596,7 @@ static int wm831x_power_probe(struct platform_device *pdev) platform_get_irq_byname(pdev, wm831x_bat_irqs[i])); ret = request_threaded_irq(irq, NULL, wm831x_bat_irq, - IRQF_TRIGGER_RISING, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, wm831x_bat_irqs[i], power); if (ret != 0) { @@ -626,8 +627,7 @@ err_usb: power_supply_unregister(power->usb); err_wall: power_supply_unregister(power->wall); -err_kmalloc: - kfree(power); +err: return ret; } @@ -654,7 +654,6 @@ static int wm831x_power_remove(struct platform_device *pdev) power_supply_unregister(wm831x_power->battery); power_supply_unregister(wm831x_power->wall); power_supply_unregister(wm831x_power->usb); - kfree(wm831x_power); return 0; } |