diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/power/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/ds2780_battery.c | 853 | ||||
| -rw-r--r-- | drivers/power/ds2782_battery.c | 4 | ||||
| -rw-r--r-- | drivers/power/intel_mid_battery.c | 2 | ||||
| -rw-r--r-- | drivers/power/max8925_power.c | 10 |
6 files changed, 866 insertions, 11 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index fddc392369ed..57de051a74b3 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -68,6 +68,13 @@ config BATTERY_DS2760 help Say Y here to enable support for batteries with ds2760 chip. +config BATTERY_DS2780 + tristate "DS2780 battery driver" + select W1 + select W1_SLAVE_DS2780 + help + Say Y here to enable support for batteries with ds2780 chip. + config BATTERY_DS2782 tristate "DS2782/DS2786 standalone gas-gauge" depends on I2C diff --git a/drivers/power/Makefile b/drivers/power/Makefile index a18e899b1f46..b4af13dd8b66 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_TEST_POWER) += test_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o +obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c new file mode 100644 index 000000000000..1fefe82e12e3 --- /dev/null +++ b/drivers/power/ds2780_battery.c @@ -0,0 +1,853 @@ +/* + * 1-wire client/driver for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC + * + * Copyright (C) 2010 Indesign, LLC + * + * Author: Clifton Barnes <cabarnes@indesign-llc.com> + * + * Based on ds2760_battery and ds2782_battery drivers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/param.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/idr.h> + +#include "../w1/w1.h" +#include "../w1/slaves/w1_ds2780.h" + +/* Current unit measurement in uA for a 1 milli-ohm sense resistor */ +#define DS2780_CURRENT_UNITS 1563 +/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */ +#define DS2780_CHARGE_UNITS 6250 +/* Number of bytes in user EEPROM space */ +#define DS2780_USER_EEPROM_SIZE (DS2780_EEPROM_BLOCK0_END - \ + DS2780_EEPROM_BLOCK0_START + 1) +/* Number of bytes in parameter EEPROM space */ +#define DS2780_PARAM_EEPROM_SIZE (DS2780_EEPROM_BLOCK1_END - \ + DS2780_EEPROM_BLOCK1_START + 1) + +struct ds2780_device_info { + struct device *dev; + struct power_supply bat; + struct device *w1_dev; +}; + +enum current_types { + CURRENT_NOW, + CURRENT_AVG, +}; + +static const char model[] = "DS2780"; +static const char manufacturer[] = "Maxim/Dallas"; + +static inline struct ds2780_device_info *to_ds2780_device_info( + struct power_supply *psy) +{ + return container_of(psy, struct ds2780_device_info, bat); +} + +static inline struct power_supply *to_power_supply(struct device *dev) +{ + return dev_get_drvdata(dev); +} + +static inline int ds2780_read8(struct device *dev, u8 *val, int addr) +{ + return w1_ds2780_io(dev, val, addr, sizeof(u8), 0); +} + +static int ds2780_read16(struct device *dev, s16 *val, int addr) +{ + int ret; + u8 raw[2]; + + ret = w1_ds2780_io(dev, raw, addr, sizeof(u8) * 2, 0); + if (ret < 0) + return ret; + + *val = (raw[0] << 8) | raw[1]; + + return 0; +} + +static inline int ds2780_read_block(struct device *dev, u8 *val, int addr, + size_t count) +{ + return w1_ds2780_io(dev, val, addr, count, 0); +} + +static inline int ds2780_write(struct device *dev, u8 *val, int addr, + size_t count) +{ + return w1_ds2780_io(dev, val, addr, count, 1); +} + +static inline int ds2780_store_eeprom(struct device *dev, int addr) +{ + return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_COPY_DATA); +} + +static inline int ds2780_recall_eeprom(struct device *dev, int addr) +{ + return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_RECALL_DATA); +} + +static int ds2780_save_eeprom(struct ds2780_device_info *dev_info, int reg) +{ + int ret; + + ret = ds2780_store_eeprom(dev_info->w1_dev, reg); + if (ret < 0) + return ret; + + ret = ds2780_recall_eeprom(dev_info->w1_dev, reg); + if (ret < 0) + return ret; + + return 0; +} + +/* Set sense resistor value in mhos */ +static int ds2780_set_sense_register(struct ds2780_device_info *dev_info, + u8 conductance) +{ + int ret; + + ret = ds2780_write(dev_info->w1_dev, &conductance, + DS2780_RSNSP_REG, sizeof(u8)); + if (ret < 0) + return ret; + + return ds2780_save_eeprom(dev_info, DS2780_RSNSP_REG); +} + +/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */ +static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info, + u16 *rsgain) +{ + return ds2780_read16(dev_info->w1_dev, rsgain, DS2780_RSGAIN_MSB_REG); +} + +/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */ +static int ds2780_set_rsgain_register(struct ds2780_device_info *dev_info, + u16 rsgain) +{ + int ret; + u8 raw[] = {rsgain >> 8, rsgain & 0xFF}; + + ret = ds2780_write(dev_info->w1_dev, raw, + DS2780_RSGAIN_MSB_REG, sizeof(u8) * 2); + if (ret < 0) + return ret; + + return ds2780_save_eeprom(dev_info, DS2780_RSGAIN_MSB_REG); +} + +static int ds2780_get_voltage(struct ds2780_device_info *dev_info, + int *voltage_uV) +{ + int ret; + s16 voltage_raw; + + /* + * The voltage value is located in 10 bits across the voltage MSB + * and LSB registers in two's compliment form + * Sign bit of the voltage value is in bit 7 of the voltage MSB register + * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the + * voltage MSB register + * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the + * voltage LSB register + */ + ret = ds2780_read16(dev_info->w1_dev, &voltage_raw, + DS2780_VOLT_MSB_REG); + if (ret < 0) + return ret; + + /* + * DS2780 reports voltage in units of 4.88mV, but the battery class + * reports in units of uV, so convert by multiplying by 4880. + */ + *voltage_uV = (voltage_raw / 32) * 4880; + return 0; +} + +static int ds2780_get_temperature(struct ds2780_device_info *dev_info, + int *temperature) +{ + int ret; + s16 temperature_raw; + + /* + * The temperature value is located in 10 bits across the temperature + * MSB and LSB registers in two's compliment form + * Sign bit of the temperature value is in bit 7 of the temperature + * MSB register + * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the + * temperature MSB register + * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the + * temperature LSB register + */ + ret = ds2780_read16(dev_info->w1_dev, &temperature_raw, + DS2780_TEMP_MSB_REG); + if (ret < 0) + return ret; + + /* + * Temperature is measured in units of 0.125 degrees celcius, the + * power_supply class measures temperature in tenths of degrees + * celsius. The temperature value is stored as a 10 bit number, plus + * sign in the upper bits of a 16 bit register. + */ + *temperature = ((temperature_raw / 32) * 125) / 100; + return 0; +} + +static int ds2780_get_current(struct ds2780_device_info *dev_info, + enum current_types type, int *current_uA) +{ + int ret, sense_res; + s16 current_raw; + u8 sense_res_raw, reg_msb; + + /* + * The units of measurement for current are dependent on the value of + * the sense resistor. + */ + ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG); + if (ret < 0) + return ret; + + if (sense_res_raw == 0) { + dev_err(dev_info->dev, "sense resistor value is 0\n"); + return -ENXIO; + } + sense_res = 1000 / sense_res_raw; + + if (type == CURRENT_NOW) + reg_msb = DS2780_CURRENT_MSB_REG; + else if (type == CURRENT_AVG) + reg_msb = DS2780_IAVG_MSB_REG; + else + return -EINVAL; + + /* + * The current value is located in 16 bits across the current MSB + * and LSB registers in two's compliment form + * Sign bit of the current value is in bit 7 of the current MSB register + * Bits 14 - 8 of the current value are in bits 6 - 0 of the current + * MSB register + * Bits 7 - 0 of the current value are in bits 7 - 0 of the current + * LSB register + */ + ret = ds2780_read16(dev_info->w1_dev, ¤t_raw, reg_msb); + if (ret < 0) + return ret; + + *current_uA = current_raw * (DS2780_CURRENT_UNITS / sense_res); + return 0; +} + +static int ds2780_get_accumulated_current(struct ds2780_device_info *dev_info, + int *accumulated_current) +{ + int ret, sense_res; + s16 current_raw; + u8 sense_res_raw; + + /* + * The units of measurement for accumulated current are dependent on + * the value of the sense resistor. + */ + ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG); + if (ret < 0) + return ret; + + if (sense_res_raw == 0) { + dev_err(dev_info->dev, "sense resistor value is 0\n"); + return -ENXIO; + } + sense_res = 1000 / sense_res_raw; + + /* + * The ACR value is located in 16 bits across the ACR MSB and + * LSB registers + * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR + * MSB register + * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR + * LSB register + */ + ret = ds2780_read16(dev_info->w1_dev, ¤t_raw, DS2780_ACR_MSB_REG); + if (ret < 0) + return ret; + + *accumulated_current = current_raw * (DS2780_CHARGE_UNITS / sense_res); + return 0; +} + +static int ds2780_get_capacity(struct ds2780_device_info *dev_info, + int *capacity) +{ + int ret; + u8 raw; + + ret = ds2780_read8(dev_info->w1_dev, &raw, DS2780_RARC_REG); + if (ret < 0) + return ret; + + *capacity = raw; + return raw; +} + +static int ds2780_get_status(struct ds2780_device_info *dev_info, int *status) +{ + int ret, current_uA, capacity; + + ret = ds2780_get_current(dev_info, CURRENT_NOW, ¤t_uA); + if (ret < 0) + return ret; + + ret = ds2780_get_capacity(dev_info, &capacity); + if (ret < 0) + return ret; + + if (capacity == 100) + *status = POWER_SUPPLY_STATUS_FULL; + else if (current_uA == 0) + *status = POWER_SUPPLY_STATUS_NOT_CHARGING; + else if (current_uA < 0) + *status = POWER_SUPPLY_STATUS_DISCHARGING; + else + *status = POWER_SUPPLY_STATUS_CHARGING; + + return 0; +} + +static int ds2780_get_charge_now(struct ds2780_device_info *dev_info, + int *charge_now) +{ + int ret; + u16 charge_raw; + + /* + * The RAAC value is located in 16 bits across the RAAC MSB and + * LSB registers + * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC + * MSB register + * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC + * LSB register + */ + ret = ds2780_read16(dev_info->w1_dev, &charge_raw, DS2780_RAAC_MSB_REG); + if (ret < 0) + return ret; + + *charge_now = charge_raw * 1600; + return 0; +} + +static int ds2780_get_control_register(struct ds2780_device_info *dev_info, + u8 *control_reg) +{ + return ds2780_read8(dev_info->w1_dev, control_reg, DS2780_CONTROL_REG); +} + +static int ds2780_set_control_register(struct ds2780_device_info *dev_info, + u8 control_reg) +{ + int ret; + + ret = ds2780_write(dev_info->w1_dev, &control_reg, + DS2780_CONTROL_REG, sizeof(u8)); + if (ret < 0) + return ret; + + return ds2780_save_eeprom(dev_info, DS2780_CONTROL_REG); +} + +static int ds2780_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = ds2780_get_voltage(dev_info, &val->intval); + break; + + case POWER_SUPPLY_PROP_TEMP: + ret = ds2780_get_temperature(dev_info, &val->intval); + break; + + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = model; + break; + + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = manufacturer; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = ds2780_get_current(dev_info, CURRENT_NOW, &val->intval); + break; + + case POWER_SUPPLY_PROP_CURRENT_AVG: + ret = ds2780_get_current(dev_info, CURRENT_AVG, &val->intval); + break; + + case POWER_SUPPLY_PROP_STATUS: + ret = ds2780_get_status(dev_info, &val->intval); + break; + + case POWER_SUPPLY_PROP_CAPACITY: + ret = ds2780_get_capacity(dev_info, &val->intval); + break; + + case POWER_SUPPLY_PROP_CHARGE_COUNTER: + ret = ds2780_get_accumulated_current(dev_info, &val->intval); + break; + + case POWER_SUPPLY_PROP_CHARGE_NOW: + ret = ds2780_get_charge_now(dev_info, &val->intval); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static enum power_supply_property ds2780_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CHARGE_COUNTER, + POWER_SUPPLY_PROP_CHARGE_NOW, +}; + +static ssize_t ds2780_get_pmod_enabled(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 control_reg; + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + /* Get power mode */ + ret = ds2780_get_control_register(dev_info, &control_reg); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", + !!(control_reg & DS2780_CONTROL_REG_PMOD)); +} + +static ssize_t ds2780_set_pmod_enabled(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + int ret; + u8 control_reg, new_setting; + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + /* Set power mode */ + ret = ds2780_get_control_register(dev_info, &control_reg); + if (ret < 0) + return ret; + + ret = kstrtou8(buf, 0, &new_setting); + if (ret < 0) + return ret; + + if ((new_setting != 0) && (new_setting != 1)) { + dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n"); + return -EINVAL; + } + + if (new_setting) + control_reg |= DS2780_CONTROL_REG_PMOD; + else + control_reg &= ~DS2780_CONTROL_REG_PMOD; + + ret = ds2780_set_control_register(dev_info, control_reg); + if (ret < 0) + return ret; + + return count; +} + +static ssize_t ds2780_get_sense_resistor_value(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 sense_resistor; + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + ret = ds2780_read8(dev_info->w1_dev, &sense_resistor, DS2780_RSNSP_REG); + if (ret < 0) + return ret; + + ret = sprintf(buf, "%d\n", sense_resistor); + return ret; +} + +static ssize_t ds2780_set_sense_resistor_value(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + int ret; + u8 new_setting; + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + ret = kstrtou8(buf, 0, &new_setting); + if (ret < 0) + return ret; + + ret = ds2780_set_sense_register(dev_info, new_setting); + if (ret < 0) + return ret; + + return count; +} + +static ssize_t ds2780_get_rsgain_setting(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u16 rsgain; + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + ret = ds2780_get_rsgain_register(dev_info, &rsgain); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", rsgain); +} + +static ssize_t ds2780_set_rsgain_setting(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + int ret; + u16 new_setting; + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + ret = kstrtou16(buf, 0, &new_setting); + if (ret < 0) + return ret; + + /* Gain can only be from 0 to 1.999 in steps of .001 */ + if (new_setting > 1999) { + dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n"); + return -EINVAL; + } + + ret = ds2780_set_rsgain_register(dev_info, new_setting); + if (ret < 0) + return ret; + + return count; +} + +static ssize_t ds2780_get_pio_pin(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 sfr; + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + ret = ds2780_read8(dev_info->w1_dev, &sfr, DS2780_SFR_REG); + if (ret < 0) + return ret; + + ret = sprintf(buf, "%d\n", sfr & DS2780_SFR_REG_PIOSC); + return ret; +} + +static ssize_t ds2780_set_pio_pin(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + int ret; + u8 new_setting; + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + ret = kstrtou8(buf, 0, &new_setting); + if (ret < 0) + return ret; + + if ((new_setting != 0) && (new_setting != 1)) { + dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n"); + return -EINVAL; + } + + ret = ds2780_write(dev_info->w1_dev, &new_setting, + DS2780_SFR_REG, sizeof(u8)); + if (ret < 0) + return ret; + + return count; +} + +static ssize_t ds2780_read_param_eeprom_bin(struct file *filp, + struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + count = min_t(loff_t, count, + DS2780_EEPROM_BLOCK1_END - + DS2780_EEPROM_BLOCK1_START + 1 - off); + + return ds2780_read_block(dev_info->w1_dev, buf, + DS2780_EEPROM_BLOCK1_START + off, count); +} + +static ssize_t ds2780_write_param_eeprom_bin(struct file *filp, + struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + int ret; + + count = min_t(loff_t, count, + DS2780_EEPROM_BLOCK1_END - + DS2780_EEPROM_BLOCK1_START + 1 - off); + + ret = ds2780_write(dev_info->w1_dev, buf, + DS2780_EEPROM_BLOCK1_START + off, count); + if (ret < 0) + return ret; + + ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK1_START); + if (ret < 0) + return ret; + + return count; +} + +static struct bin_attribute ds2780_param_eeprom_bin_attr = { + .attr = { + .name = "param_eeprom", + .mode = S_IRUGO | S_IWUSR, + }, + .size = DS2780_EEPROM_BLOCK1_END - DS2780_EEPROM_BLOCK1_START + 1, + .read = ds2780_read_param_eeprom_bin, + .write = ds2780_write_param_eeprom_bin, +}; + +static ssize_t ds2780_read_user_eeprom_bin(struct file *filp, + struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + + count = min_t(loff_t, count, + DS2780_EEPROM_BLOCK0_END - + DS2780_EEPROM_BLOCK0_START + 1 - off); + + return ds2780_read_block(dev_info->w1_dev, buf, + DS2780_EEPROM_BLOCK0_START + off, count); + +} + +static ssize_t ds2780_write_user_eeprom_bin(struct file *filp, + struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct power_supply *psy = to_power_supply(dev); + struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); + int ret; + + count = min_t(loff_t, count, + DS2780_EEPROM_BLOCK0_END - + DS2780_EEPROM_BLOCK0_START + 1 - off); + + ret = ds2780_write(dev_info->w1_dev, buf, + DS2780_EEPROM_BLOCK0_START + off, count); + if (ret < 0) + return ret; + + ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK0_START); + if (ret < 0) + return ret; + + return count; +} + +static struct bin_attribute ds2780_user_eeprom_bin_attr = { + .attr = { + .name = "user_eeprom", + .mode = S_IRUGO | S_IWUSR, + }, + .size = DS2780_EEPROM_BLOCK0_END - DS2780_EEPROM_BLOCK0_START + 1, + .read = ds2780_read_user_eeprom_bin, + .write = ds2780_write_user_eeprom_bin, +}; + +static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2780_get_pmod_enabled, + ds2780_set_pmod_enabled); +static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR, + ds2780_get_sense_resistor_value, ds2780_set_sense_resistor_value); +static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2780_get_rsgain_setting, + ds2780_set_rsgain_setting); +static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2780_get_pio_pin, + ds2780_set_pio_pin); + + +static struct attribute *ds2780_attributes[] = { + &dev_attr_pmod_enabled.attr, + &dev_attr_sense_resistor_value.attr, + &dev_attr_rsgain_setting.attr, + &dev_attr_pio_pin.attr, + NULL +}; + +static const struct attribute_group ds2780_attr_group = { + .attrs = ds2780_attributes, +}; + +static int __devinit ds2780_battery_probe(struct platform_device *pdev) +{ + int ret = 0; + struct ds2780_device_info *dev_info; + + dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL); + if (!dev_info) { + ret = -ENOMEM; + goto fail; + } + + platform_set_drvdata(pdev, dev_info); + + dev_info->dev = &pdev->dev; + dev_info->w1_dev = pdev->dev.parent; + dev_info->bat.name = dev_name(&pdev->dev); + dev_info->bat.type = POWER_SUPPLY_TYPE_BATTERY; + dev_info->bat.properties = ds2780_battery_props; + dev_info->bat.num_properties = ARRAY_SIZE(ds2780_battery_props); + dev_info->bat.get_property = ds2780_battery_get_property; + + ret = power_supply_register(&pdev->dev, &dev_info->bat); + if (ret) { + dev_err(dev_info->dev, "failed to register battery\n"); + goto fail_free_info; + } + + ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); + if (ret) { + dev_err(dev_info->dev, "failed to create sysfs group\n"); + goto fail_unregister; + } + + ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj, + &ds2780_param_eeprom_bin_attr); + if (ret) { + dev_err(dev_info->dev, + "failed to create param eeprom bin file"); + goto fail_remove_group; + } + + ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj, + &ds2780_user_eeprom_bin_attr); + if (ret) { + dev_err(dev_info->dev, + "failed to create user eeprom bin file"); + goto fail_remove_bin_file; + } + + return 0; + +fail_remove_bin_file: + sysfs_remove_bin_file(&dev_info->bat.dev->kobj, + &ds2780_param_eeprom_bin_attr); +fail_remove_group: + sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); +fail_unregister: + power_supply_unregister(&dev_info->bat); +fail_free_info: + kfree(dev_info); +fail: + return ret; +} + +static int __devexit ds2780_battery_remove(struct platform_device *pdev) +{ + struct ds2780_device_info *dev_info = platform_get_drvdata(pdev); + + /* remove attributes */ + sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); + + power_supply_unregister(&dev_info->bat); + + kfree(dev_info); + return 0; +} + +MODULE_ALIAS("platform:ds2780-battery"); + +static struct platform_driver ds2780_battery_driver = { + .driver = { + .name = "ds2780-battery", + }, + .probe = ds2780_battery_probe, + .remove = ds2780_battery_remove, +}; + +static int __init ds2780_battery_init(void) +{ + return platform_driver_register(&ds2780_battery_driver); +} + +static void __exit ds2780_battery_exit(void) +{ + platform_driver_unregister(&ds2780_battery_driver); +} + +module_init(ds2780_battery_init); +module_exit(ds2780_battery_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>"); +MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver"); diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c index 4d2dc4fa2888..bfbce5de49da 100644 --- a/drivers/power/ds2782_battery.c +++ b/drivers/power/ds2782_battery.c @@ -3,7 +3,7 @@ * * Copyright (C) 2009 Bluewater Systems Ltd * - * Author: Ryan Mallon <ryan@bluewatersys.com> + * Author: Ryan Mallon * * DS2786 added by Yulia Vilensky <vilensky@compulab.co.il> * @@ -416,6 +416,6 @@ static void __exit ds278x_exit(void) } module_exit(ds278x_exit); -MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>"); +MODULE_AUTHOR("Ryan Mallon"); MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c index bce3a01da2f0..cffcb7c00b00 100644 --- a/drivers/power/intel_mid_battery.c +++ b/drivers/power/intel_mid_battery.c @@ -522,7 +522,7 @@ static int pmic_battery_set_charger(struct pmic_power_module_info *pbi, if (retval) { dev_warn(pbi->dev, "%s(): ipc pmic read failed\n", __func__); - return retval;; + return retval; } return 0; diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c index 8e5aec260866..a70e16d3a3dc 100644 --- a/drivers/power/max8925_power.c +++ b/drivers/power/max8925_power.c @@ -425,16 +425,11 @@ static __devexit int max8925_deinit_charger(struct max8925_power_info *info) static __devinit int max8925_power_probe(struct platform_device *pdev) { struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); - struct max8925_platform_data *max8925_pdata; struct max8925_power_pdata *pdata = NULL; struct max8925_power_info *info; int ret; - if (pdev->dev.parent->platform_data) { - max8925_pdata = pdev->dev.parent->platform_data; - pdata = max8925_pdata->power; - } - + pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "platform data isn't assigned to " "power supply\n"); @@ -447,6 +442,7 @@ static __devinit int max8925_power_probe(struct platform_device *pdev) info->chip = chip; info->gpm = chip->i2c; info->adc = chip->adc; + platform_set_drvdata(pdev, info); info->ac.name = "max8925-ac"; info->ac.type = POWER_SUPPLY_TYPE_MAINS; @@ -482,8 +478,6 @@ static __devinit int max8925_power_probe(struct platform_device *pdev) info->topoff_threshold = pdata->topoff_threshold; info->fast_charge = pdata->fast_charge; info->set_charger = pdata->set_charger; - dev_set_drvdata(&pdev->dev, info); - platform_set_drvdata(pdev, info); max8925_init_charger(chip, info); return 0; |