diff options
Diffstat (limited to 'drivers/regulator/max77686.c')
| -rw-r--r-- | drivers/regulator/max77686.c | 70 |
1 files changed, 65 insertions, 5 deletions
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index 10d206266ac2..15fb1416bfbd 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -26,6 +26,7 @@ #include <linux/bug.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> @@ -46,6 +47,11 @@ #define MAX77686_DVS_UVSTEP 12500 /* + * Value for configuring buck[89] and LDO{20,21,22} as GPIO control. + * It is the same as 'off' for other regulators. + */ +#define MAX77686_GPIO_CONTROL 0x0 +/* * Values used for configuring LDOs and bucks. * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26 */ @@ -82,6 +88,8 @@ enum max77686_ramp_rate { }; struct max77686_data { + u64 gpio_enabled:MAX77686_REGULATORS; + /* Array indexed by regulator id */ unsigned int opmode[MAX77686_REGULATORS]; }; @@ -100,6 +108,26 @@ static unsigned int max77686_get_opmode_shift(int id) } } +/* + * When regulator is configured for GPIO control then it + * replaces "normal" mode. Any change from low power mode to normal + * should actually change to GPIO control. + * Map normal mode to proper value for such regulators. + */ +static unsigned int max77686_map_normal_mode(struct max77686_data *max77686, + int id) +{ + switch (id) { + case MAX77686_BUCK8: + case MAX77686_BUCK9: + case MAX77686_LDO20 ... MAX77686_LDO22: + if (max77686->gpio_enabled & (1 << id)) + return MAX77686_GPIO_CONTROL; + } + + return MAX77686_NORMAL; +} + /* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */ static int max77686_set_suspend_disable(struct regulator_dev *rdev) { @@ -136,7 +164,7 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev, val = MAX77686_LDO_LOWPOWER_PWRREQ; break; case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ - val = MAX77686_NORMAL; + val = max77686_map_normal_mode(max77686, id); break; default: pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", @@ -160,7 +188,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, { unsigned int val; struct max77686_data *max77686 = rdev_get_drvdata(rdev); - int ret; + int ret, id = rdev_get_id(rdev); switch (mode) { case REGULATOR_MODE_STANDBY: /* switch off */ @@ -170,7 +198,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, val = MAX77686_LDO_LOWPOWER_PWRREQ; break; case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ - val = MAX77686_NORMAL; + val = max77686_map_normal_mode(max77686, id); break; default: pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", @@ -184,7 +212,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, if (ret) return ret; - max77686->opmode[rdev_get_id(rdev)] = val; + max77686->opmode[id] = val; return 0; } @@ -197,7 +225,7 @@ static int max77686_enable(struct regulator_dev *rdev) shift = max77686_get_opmode_shift(id); if (max77686->opmode[id] == MAX77686_OFF_PWRREQ) - max77686->opmode[id] = MAX77686_NORMAL; + max77686->opmode[id] = max77686_map_normal_mode(max77686, id); return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, @@ -229,6 +257,36 @@ static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) MAX77686_RAMP_RATE_MASK, ramp_value << 6); } +static int max77686_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct max77686_data *max77686 = config->driver_data; + + switch (desc->id) { + case MAX77686_BUCK8: + case MAX77686_BUCK9: + case MAX77686_LDO20 ... MAX77686_LDO22: + config->ena_gpio = of_get_named_gpio(np, + "maxim,ena-gpios", 0); + config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; + config->ena_gpio_initialized = true; + break; + default: + return 0; + } + + if (gpio_is_valid(config->ena_gpio)) { + max77686->gpio_enabled |= (1 << desc->id); + + return regmap_update_bits(config->regmap, desc->enable_reg, + desc->enable_mask, + MAX77686_GPIO_CONTROL); + } + + return 0; +} + static struct regulator_ops max77686_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, @@ -283,6 +341,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { .name = "LDO"#num, \ .of_match = of_match_ptr("LDO"#num), \ .regulators_node = of_match_ptr("voltage-regulators"), \ + .of_parse_cb = max77686_of_parse_cb, \ .id = MAX77686_LDO##num, \ .ops = &max77686_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -355,6 +414,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { .name = "BUCK"#num, \ .of_match = of_match_ptr("BUCK"#num), \ .regulators_node = of_match_ptr("voltage-regulators"), \ + .of_parse_cb = max77686_of_parse_cb, \ .id = MAX77686_BUCK##num, \ .ops = &max77686_ops, \ .type = REGULATOR_VOLTAGE, \ |