diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/da9052-regulator.c | 600 |
3 files changed, 608 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4e919b2ac7ee..7a61b17ddd04 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -178,6 +178,13 @@ config REGULATOR_DA903X Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. +config REGULATOR_DA9052 + tristate "Dialog DA9052/DA9053 regulators" + depends on PMIC_DA9052 + help + This driver supports the voltage regulators of DA9052-BC and + DA9053-AA/Bx PMIC. + config REGULATOR_PCF50633 tristate "PCF50633 regulator driver" depends on MFD_PCF50633 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index c75a5229cb27..503bac87715e 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o +obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c new file mode 100644 index 000000000000..30c647f80574 --- /dev/null +++ b/drivers/regulator/da9052-regulator.c @@ -0,0 +1,600 @@ +/* +* da9052-regulator.c: Regulator driver for DA9052 +* +* Copyright(c) 2011 Dialog Semiconductor Ltd. +* +* Author: David Dajun Chen <dchen@diasemi.com> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> +#include <linux/mfd/da9052/pdata.h> + +/* Buck step size */ +#define DA9052_BUCK_PERI_3uV_STEP 100000 +#define DA9052_BUCK_PERI_REG_MAP_UPTO_3uV 24 +#define DA9052_CONST_3uV 3000000 + +#define DA9052_MIN_UA 0 +#define DA9052_MAX_UA 3 +#define DA9052_CURRENT_RANGE 4 + +/* Bit masks */ +#define DA9052_BUCK_ILIM_MASK_EVEN 0x0c +#define DA9052_BUCK_ILIM_MASK_ODD 0xc0 + +static const u32 da9052_current_limits[3][4] = { + {700000, 800000, 1000000, 1200000}, /* DA9052-BC BUCKs */ + {1600000, 2000000, 2400000, 3000000}, /* DA9053-AA/Bx BUCK-CORE */ + {800000, 1000000, 1200000, 1500000}, /* DA9053-AA/Bx BUCK-PRO, + * BUCK-MEM and BUCK-PERI + */ +}; + +struct da9052_regulator_info { + struct regulator_desc reg_desc; + int step_uV; + int min_uV; + int max_uV; + unsigned char volt_shift; + unsigned char en_bit; + unsigned char activate_bit; +}; + +struct da9052_regulator { + struct da9052 *da9052; + struct da9052_regulator_info *info; + struct regulator_dev *rdev; +}; + +static int verify_range(struct da9052_regulator_info *info, + int min_uV, int max_uV) +{ + if (min_uV > info->max_uV || max_uV < info->min_uV) + return -EINVAL; + + return 0; +} + +static int da9052_regulator_enable(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + 1 << info->en_bit, 1 << info->en_bit); +} + +static int da9052_regulator_disable(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + 1 << info->en_bit, 0); +} + +static int da9052_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + return ret & (1 << info->en_bit); +} + +static int da9052_dcdc_get_current_limit(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + int offset = rdev_get_id(rdev); + int ret, row = 2; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKA_REG + offset/2); + if (ret < 0) + return ret; + + /* Determine the even or odd position of the buck current limit + * register field + */ + if (offset % 2 == 0) + ret = (ret & DA9052_BUCK_ILIM_MASK_EVEN) >> 2; + else + ret = (ret & DA9052_BUCK_ILIM_MASK_ODD) >> 6; + + /* Select the appropriate current limit range */ + if (regulator->da9052->chip_id == DA9052) + row = 0; + else if (offset == 0) + row = 1; + + return da9052_current_limits[row][ret]; +} + +static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + int offset = rdev_get_id(rdev); + int reg_val = 0; + int i, row = 2; + + /* Select the appropriate current limit range */ + if (regulator->da9052->chip_id == DA9052) + row = 0; + else if (offset == 0) + row = 1; + + if (min_uA > da9052_current_limits[row][DA9052_MAX_UA] || + max_uA < da9052_current_limits[row][DA9052_MIN_UA]) + return -EINVAL; + + for (i = 0; i < DA9052_CURRENT_RANGE; i++) { + if (min_uA <= da9052_current_limits[row][i]) { + reg_val = i; + break; + } + } + + /* Determine the even or odd position of the buck current limit + * register field + */ + if (offset % 2 == 0) + return da9052_reg_update(regulator->da9052, + DA9052_BUCKA_REG + offset/2, + DA9052_BUCK_ILIM_MASK_EVEN, + reg_val << 2); + else + return da9052_reg_update(regulator->da9052, + DA9052_BUCKA_REG + offset/2, + DA9052_BUCK_ILIM_MASK_ODD, + reg_val << 6); +} + +static int da9052_list_buckperi_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int volt_uV; + + if ((regulator->da9052->chip_id == DA9052) && + (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) { + volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV) + + info->min_uV); + volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) + * (DA9052_BUCK_PERI_3uV_STEP); + } else + volt_uV = (selector * info->step_uV) + info->min_uV; + + if (volt_uV > info->max_uV) + return -EINVAL; + + return volt_uV; +} + +static int da9052_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int volt_uV; + + volt_uV = info->min_uV + info->step_uV * selector; + + if (volt_uV > info->max_uV) + return -EINVAL; + + return volt_uV; +} + +static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = verify_range(info, min_uV, max_uV); + if (ret < 0) + return ret; + + if (min_uV < info->min_uV) + min_uV = info->min_uV; + + *selector = (min_uV - info->min_uV) / info->step_uV; + + ret = da9052_list_voltage(rdev, *selector); + if (ret < 0) + return ret; + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + (1 << info->volt_shift) - 1, *selector); +} + +static int da9052_set_ldo_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + return da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); +} + +static int da9052_set_ldo5_6_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int ret; + + ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); + if (ret < 0) + return ret; + + /* Some LDOs are DVC controlled which requires enabling of + * the LDO activate bit to implment the changes on the + * LDO output. + */ + return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0, + info->activate_bit); +} + +static int da9052_set_dcdc_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int ret; + + ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); + if (ret < 0) + return ret; + + /* Some DCDCs are DVC controlled which requires enabling of + * the DCDC activate bit to implment the changes on the + * DCDC output. + */ + return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0, + info->activate_bit); +} + +static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + ret &= ((1 << info->volt_shift) - 1); + + return ret; +} + +static int da9052_set_buckperi_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV, unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = verify_range(info, min_uV, max_uV); + if (ret < 0) + return ret; + + if (min_uV < info->min_uV) + min_uV = info->min_uV; + + if ((regulator->da9052->chip_id == DA9052) && + (min_uV >= DA9052_CONST_3uV)) + *selector = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV + + ((min_uV - DA9052_CONST_3uV) / + (DA9052_BUCK_PERI_3uV_STEP)); + else + *selector = (min_uV - info->min_uV) / info->step_uV; + + ret = da9052_list_buckperi_voltage(rdev, *selector); + if (ret < 0) + return ret; + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + (1 << info->volt_shift) - 1, *selector); +} + +static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + ret &= ((1 << info->volt_shift) - 1); + + return ret; +} + +static struct regulator_ops da9052_buckperi_ops = { + .list_voltage = da9052_list_buckperi_voltage, + .get_voltage_sel = da9052_get_buckperi_voltage_sel, + .set_voltage = da9052_set_buckperi_voltage, + + .get_current_limit = da9052_dcdc_get_current_limit, + .set_current_limit = da9052_dcdc_set_current_limit, + + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_dcdc_ops = { + .set_voltage = da9052_set_dcdc_voltage, + .get_current_limit = da9052_dcdc_get_current_limit, + .set_current_limit = da9052_dcdc_set_current_limit, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_ldo5_6_ops = { + .set_voltage = da9052_set_ldo5_6_voltage, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_ldo_ops = { + .set_voltage = da9052_set_ldo_voltage, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +#define DA9052_LDO5_6(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "LDO" #_id,\ + .ops = &da9052_ldo5_6_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "LDO" #_id,\ + .ops = &da9052_ldo_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "BUCK" #_id,\ + .ops = &da9052_dcdc_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_BUCKPERI(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "BUCK" #_id,\ + .ops = &da9052_buckperi_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +struct da9052_regulator_info da9052_regulator_info[] = { + /* Buck1 - 4 */ + DA9052_DCDC(0, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), + DA9052_DCDC(1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), + DA9052_DCDC(2, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_BUCKPERI(3, 50, 1800, 3600, 5, 6, 0), + /* LD01 - LDO10 */ + DA9052_LDO(4, 50, 600, 1800, 5, 6, 0), + DA9052_LDO5_6(5, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), + DA9052_LDO5_6(6, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), + DA9052_LDO(7, 25, 1725, 3300, 6, 6, 0), + DA9052_LDO(8, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(9, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(10, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(11, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(12, 50, 1250, 3650, 6, 6, 0), + DA9052_LDO(13, 50, 1200, 3600, 6, 6, 0), +}; + +struct da9052_regulator_info da9053_regulator_info[] = { + /* Buck1 - 4 */ + DA9052_DCDC(0, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), + DA9052_DCDC(1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), + DA9052_DCDC(2, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_BUCKPERI(3, 25, 925, 2500, 6, 6, 0), + /* LD01 - LDO10 */ + DA9052_LDO(4, 50, 600, 1800, 5, 6, 0), + DA9052_LDO5_6(5, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), + DA9052_LDO5_6(6, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), + DA9052_LDO(7, 25, 1725, 3300, 6, 6, 0), + DA9052_LDO(8, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(9, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(10, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(11, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(12, 50, 1250, 3650, 6, 6, 0), + DA9052_LDO(13, 50, 1200, 3600, 6, 6, 0), +}; + +static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id, + int id) +{ + struct da9052_regulator_info *info; + int i; + + if (chip_id == DA9052) { + for (i = 0; i < ARRAY_SIZE(da9052_regulator_info); i++) { + info = &da9052_regulator_info[i]; + if (info->reg_desc.id == id) + return info; + } + } else { + for (i = 0; i < ARRAY_SIZE(da9053_regulator_info); i++) { + info = &da9053_regulator_info[i]; + if (info->reg_desc.id == id) + return info; + } + } + + return NULL; +} + +static int __devinit da9052_regulator_probe(struct platform_device *pdev) +{ + struct da9052_regulator *regulator; + struct da9052 *da9052; + struct da9052_pdata *pdata; + int ret; + + regulator = kzalloc(sizeof(struct da9052_regulator), GFP_KERNEL); + if (!regulator) + return -ENOMEM; + + da9052 = dev_get_drvdata(pdev->dev.parent); + pdata = da9052->dev->platform_data; + regulator->da9052 = da9052; + + regulator->info = find_regulator_info(regulator->da9052->chip_id, + pdev->id); + if (regulator->info == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + ret = -EINVAL; + goto err; + } + regulator->rdev = regulator_register(®ulator->info->reg_desc, + &pdev->dev, + pdata->regulators[pdev->id], + regulator); + if (IS_ERR(regulator->rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + regulator->info->reg_desc.name); + ret = PTR_ERR(regulator->rdev); + goto err; + } + + platform_set_drvdata(pdev, regulator); + + return 0; +err: + kfree(regulator); + return ret; +} + +static int __devexit da9052_regulator_remove(struct platform_device *pdev) +{ + struct da9052_regulator *regulator = platform_get_drvdata(pdev); + + regulator_unregister(regulator->rdev); + kfree(regulator); + + return 0; +} + +static struct platform_driver da9052_regulator_driver = { + .probe = da9052_regulator_probe, + .remove = __devexit_p(da9052_regulator_remove), + .driver = { + .name = "da9052-regulator", + .owner = THIS_MODULE, + }, +}; + +static int __init da9052_regulator_init(void) +{ + return platform_driver_register(&da9052_regulator_driver); +} +subsys_initcall(da9052_regulator_init); + +static void __exit da9052_regulator_exit(void) +{ + platform_driver_unregister(&da9052_regulator_driver); +} +module_exit(da9052_regulator_exit); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9052 PMIC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-regulator"); |