summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/Kconfig17
-rw-r--r--drivers/regulator/Makefile6
-rw-r--r--drivers/regulator/act8865-regulator.c8
-rw-r--r--drivers/regulator/act8945a-regulator.c165
-rw-r--r--drivers/regulator/ad5398.c6
-rw-r--r--drivers/regulator/axp20x-regulator.c56
-rw-r--r--drivers/regulator/core.c53
-rw-r--r--drivers/regulator/da9210-regulator.c5
-rw-r--r--drivers/regulator/fan53555.c18
-rw-r--r--drivers/regulator/gpio-regulator.c6
-rw-r--r--drivers/regulator/hi655x-regulator.c227
-rw-r--r--drivers/regulator/lp872x.c38
-rw-r--r--drivers/regulator/ltc3589.c15
-rw-r--r--drivers/regulator/max77686-regulator.c (renamed from drivers/regulator/max77686.c)0
-rw-r--r--drivers/regulator/max77802-regulator.c (renamed from drivers/regulator/max77802.c)0
-rw-r--r--drivers/regulator/pv88090-regulator.c8
16 files changed, 545 insertions, 83 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index b92214bb8dfb..91040ec8e242 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -78,6 +78,15 @@ config REGULATOR_ACT8865
This driver controls a active-semi act8865 voltage output
regulator via I2C bus.
+config REGULATOR_ACT8945A
+ tristate "Active-semi ACT8945A voltage regulator"
+ depends on MFD_ACT8945A
+ help
+ This driver controls a active-semi ACT8945A voltage regulator
+ via I2C bus. The ACT8945A features three step-down DC/DC converters
+ and four low-dropout linear regulators, along with a ActivePath
+ battery charger.
+
config REGULATOR_AD5398
tristate "Analog Devices AD5398/AD5821 regulators"
depends on I2C
@@ -261,6 +270,14 @@ config REGULATOR_HI6421
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
of them come with support to either ECO (idle) or sleep mode.
+config REGULATOR_HI655X
+ tristate "Hisilicon HI655X PMIC regulators support"
+ depends on ARCH_HISI || COMPILE_TEST
+ depends on MFD_HI655X_PMIC && OF
+ help
+ This driver provides support for the voltage regulators of the
+ Hisilicon Hi655x PMIC device.
+
config REGULATOR_ISL9305
tristate "Intersil ISL9305 regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 2564c0020b4c..a78d8bf27358 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
+obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
@@ -34,6 +35,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
@@ -55,9 +57,9 @@ obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o
obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
-obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
+obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
-obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
+obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index f8d4cd3d1397..000d566e32a4 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -218,7 +218,7 @@ static const struct regulator_desc act8600_regulators[] = {
.ops = &act8865_ldo_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
- .fixed_uV = 1800000,
+ .fixed_uV = 3300000,
.enable_reg = ACT8600_LDO910_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
@@ -369,7 +369,7 @@ static int act8865_pdata_from_dt(struct device *dev,
for (i = 0; i < num_matches; i++) {
regulator->id = i;
regulator->name = matches[i].name;
- regulator->platform_data = matches[i].init_data;
+ regulator->init_data = matches[i].init_data;
of_node[i] = matches[i].of_node;
regulator++;
}
@@ -396,7 +396,7 @@ static struct regulator_init_data
for (i = 0; i < pdata->num_regulators; i++) {
if (pdata->regulators[i].id == id)
- return pdata->regulators[i].platform_data;
+ return pdata->regulators[i].init_data;
}
return NULL;
@@ -415,7 +415,7 @@ static void act8865_power_off(void)
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
- static const struct regulator_desc *regulators;
+ const struct regulator_desc *regulators;
struct act8865_platform_data pdata_of, *pdata;
struct device *dev = &client->dev;
struct device_node **of_node;
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
new file mode 100644
index 000000000000..441864b9fece
--- /dev/null
+++ b/drivers/regulator/act8945a-regulator.c
@@ -0,0 +1,165 @@
+/*
+ * Voltage regulation driver for active-semi ACT8945A PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/**
+ * ACT8945A Global Register Map.
+ */
+#define ACT8945A_SYS_MODE 0x00
+#define ACT8945A_SYS_CTRL 0x01
+#define ACT8945A_DCDC1_VSET1 0x20
+#define ACT8945A_DCDC1_VSET2 0x21
+#define ACT8945A_DCDC1_CTRL 0x22
+#define ACT8945A_DCDC2_VSET1 0x30
+#define ACT8945A_DCDC2_VSET2 0x31
+#define ACT8945A_DCDC2_CTRL 0x32
+#define ACT8945A_DCDC3_VSET1 0x40
+#define ACT8945A_DCDC3_VSET2 0x41
+#define ACT8945A_DCDC3_CTRL 0x42
+#define ACT8945A_LDO1_VSET 0x50
+#define ACT8945A_LDO1_CTRL 0x51
+#define ACT8945A_LDO2_VSET 0x54
+#define ACT8945A_LDO2_CTRL 0x55
+#define ACT8945A_LDO3_VSET 0x60
+#define ACT8945A_LDO3_CTRL 0x61
+#define ACT8945A_LDO4_VSET 0x64
+#define ACT8945A_LDO4_CTRL 0x65
+
+/**
+ * Field Definitions.
+ */
+#define ACT8945A_ENA 0x80 /* ON - [7] */
+#define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */
+
+/**
+ * ACT8945A Voltage Number
+ */
+#define ACT8945A_VOLTAGE_NUM 64
+
+enum {
+ ACT8945A_ID_DCDC1,
+ ACT8945A_ID_DCDC2,
+ ACT8945A_ID_DCDC3,
+ ACT8945A_ID_LDO1,
+ ACT8945A_ID_LDO2,
+ ACT8945A_ID_LDO3,
+ ACT8945A_ID_LDO4,
+ ACT8945A_REG_NUM,
+};
+
+static const struct regulator_linear_range act8945a_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
+ REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
+ REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
+};
+
+static struct regulator_ops act8945a_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \
+ [_family##_ID_##_id] = { \
+ .name = _name, \
+ .supply_name = _supply, \
+ .of_match = of_match_ptr("REG_"#_id), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = _family##_ID_##_id, \
+ .type = REGULATOR_VOLTAGE, \
+ .ops = &act8945a_ops, \
+ .n_voltages = ACT8945A_VOLTAGE_NUM, \
+ .linear_ranges = act8945a_voltage_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(act8945a_voltage_ranges), \
+ .vsel_reg = _family##_##_id##_##_vsel_reg, \
+ .vsel_mask = ACT8945A_VSEL_MASK, \
+ .enable_reg = _family##_##_id##_CTRL, \
+ .enable_mask = ACT8945A_ENA, \
+ .owner = THIS_MODULE, \
+ }
+
+static const struct regulator_desc act8945a_regulators[] = {
+ ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET1, "vp1"),
+ ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET1, "vp2"),
+ ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET1, "vp3"),
+ ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"),
+ ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"),
+ ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"),
+ ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
+};
+
+static const struct regulator_desc act8945a_alt_regulators[] = {
+ ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET2, "vp1"),
+ ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET2, "vp2"),
+ ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET2, "vp3"),
+ ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"),
+ ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"),
+ ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"),
+ ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
+};
+
+static int act8945a_pmic_probe(struct platform_device *pdev)
+{
+ struct regulator_config config = { };
+ const struct regulator_desc *regulators;
+ struct regulator_dev *rdev;
+ int i, num_regulators;
+ bool voltage_select;
+
+ voltage_select = of_property_read_bool(pdev->dev.parent->of_node,
+ "active-semi,vsel-high");
+
+ if (voltage_select) {
+ regulators = act8945a_alt_regulators;
+ num_regulators = ARRAY_SIZE(act8945a_alt_regulators);
+ } else {
+ regulators = act8945a_regulators;
+ num_regulators = ARRAY_SIZE(act8945a_regulators);
+ }
+
+ config.dev = &pdev->dev;
+ config.dev->of_node = pdev->dev.parent->of_node;
+ for (i = 0; i < num_regulators; i++) {
+ rdev = devm_regulator_register(&pdev->dev, &regulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ regulators[i].name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver act8945a_pmic_driver = {
+ .driver = {
+ .name = "act8945a-regulator",
+ },
+ .probe = act8945a_pmic_probe,
+};
+module_platform_driver(act8945a_pmic_driver);
+
+MODULE_DESCRIPTION("Active-semi ACT8945A voltage regulator driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index ea50a886ba63..8b0f788a9bbb 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -58,10 +58,12 @@ static int ad5398_write_reg(struct i2c_client *client, const unsigned short data
val = cpu_to_be16(data);
ret = i2c_master_send(client, (char *)&val, 2);
- if (ret < 0)
+ if (ret != 2) {
dev_err(&client->dev, "I2C write error\n");
+ return ret < 0 ? ret : -EIO;
+ }
- return ret;
+ return 0;
}
static int ad5398_get_current_limit(struct regulator_dev *rdev)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index f2e1a39ce0f3..214e815e98eb 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -39,7 +39,7 @@
#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _enable_val, _disable_val) \
[_family##_##_id] = { \
- .name = #_id, \
+ .name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
@@ -61,7 +61,7 @@
#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask) \
[_family##_##_id] = { \
- .name = #_id, \
+ .name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
@@ -78,21 +78,15 @@
.ops = &axp20x_ops, \
}
-#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
- _vmask, _ereg, _emask) \
+#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask) \
[_family##_##_id] = { \
- .name = #_id, \
+ .name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = _family##_##_id, \
- .n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
- .min_uV = (_min) * 1000, \
- .uV_step = (_step) * 1000, \
- .vsel_reg = (_vreg), \
- .vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.ops = &axp20x_ops_sw, \
@@ -100,7 +94,7 @@
#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \
[_family##_##_id] = { \
- .name = #_id, \
+ .name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
@@ -112,39 +106,34 @@
.ops = &axp20x_ops_fixed \
}
-#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \
- _ereg, _emask) \
+#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \
+ _vreg, _vmask, _ereg, _emask) \
[_family##_##_id] = { \
- .name = #_id, \
+ .name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = _family##_##_id, \
- .n_voltages = ARRAY_SIZE(_table), \
+ .n_voltages = (_n_voltages), \
.owner = THIS_MODULE, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
- .volt_table = (_table), \
- .ops = &axp20x_ops_table, \
+ .linear_ranges = (_ranges), \
+ .n_linear_ranges = ARRAY_SIZE(_ranges), \
+ .ops = &axp20x_ops_range, \
}
-static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000,
- 1700000, 1800000, 1900000, 2000000, 2500000,
- 2700000, 2800000, 3000000, 3100000, 3200000,
- 3300000 };
-
static struct regulator_ops axp20x_ops_fixed = {
.list_voltage = regulator_list_voltage_linear,
};
-static struct regulator_ops axp20x_ops_table = {
+static struct regulator_ops axp20x_ops_range = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = regulator_list_voltage_table,
- .map_voltage = regulator_map_voltage_ascend,
+ .list_voltage = regulator_list_voltage_linear_range,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -160,13 +149,17 @@ static struct regulator_ops axp20x_ops = {
};
static struct regulator_ops axp20x_ops_sw = {
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = regulator_list_voltage_linear,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
+static const struct regulator_linear_range axp20x_ldo4_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1250000, 0x0, 0x0, 0),
+ REGULATOR_LINEAR_RANGE(1300000, 0x1, 0x8, 100000),
+ REGULATOR_LINEAR_RANGE(2500000, 0x9, 0xf, 100000),
+};
+
static const struct regulator_desc axp20x_regulators[] = {
AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
@@ -177,8 +170,9 @@ static const struct regulator_desc axp20x_regulators[] = {
AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25,
AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
- AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
- AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
+ AXP_DESC_RANGES(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_ranges,
+ 16, AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL,
+ 0x08),
AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
@@ -196,8 +190,8 @@ static const struct regulator_desc axp22x_regulators[] = {
AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
/* secondary switchable output of DCDC1 */
- AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100,
- AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)),
+ AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+ BIT(7)),
/* LDO regulator internally chained to DCDC5 */
AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 5b1e049a5930..e0b764284773 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1057,18 +1057,18 @@ static int set_machine_constraints(struct regulator_dev *rdev,
ret = machine_constraints_voltage(rdev, rdev->constraints);
if (ret != 0)
- goto out;
+ return ret;
ret = machine_constraints_current(rdev, rdev->constraints);
if (ret != 0)
- goto out;
+ return ret;
if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
ret = ops->set_input_current_limit(rdev,
rdev->constraints->ilim_uA);
if (ret < 0) {
rdev_err(rdev, "failed to set input limit\n");
- goto out;
+ return ret;
}
}
@@ -1077,21 +1077,20 @@ static int set_machine_constraints(struct regulator_dev *rdev,
ret = suspend_prepare(rdev, rdev->constraints->initial_state);
if (ret < 0) {
rdev_err(rdev, "failed to set suspend state\n");
- goto out;
+ return ret;
}
}
if (rdev->constraints->initial_mode) {
if (!ops->set_mode) {
rdev_err(rdev, "no set_mode operation\n");
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
ret = ops->set_mode(rdev, rdev->constraints->initial_mode);
if (ret < 0) {
rdev_err(rdev, "failed to set initial mode: %d\n", ret);
- goto out;
+ return ret;
}
}
@@ -1102,7 +1101,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
ret = _regulator_do_enable(rdev);
if (ret < 0 && ret != -EINVAL) {
rdev_err(rdev, "failed to enable\n");
- goto out;
+ return ret;
}
}
@@ -1111,7 +1110,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
if (ret < 0) {
rdev_err(rdev, "failed to set ramp_delay\n");
- goto out;
+ return ret;
}
}
@@ -1119,7 +1118,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
ret = ops->set_pull_down(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to set pull down\n");
- goto out;
+ return ret;
}
}
@@ -1127,7 +1126,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
ret = ops->set_soft_start(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to set soft start\n");
- goto out;
+ return ret;
}
}
@@ -1136,7 +1135,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
ret = ops->set_over_current_protection(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to set over current protection\n");
- goto out;
+ return ret;
}
}
@@ -1164,10 +1163,6 @@ static int set_machine_constraints(struct regulator_dev *rdev,
print_constraints(rdev);
return 0;
-out:
- kfree(rdev->constraints);
- rdev->constraints = NULL;
- return ret;
}
/**
@@ -3940,6 +3935,16 @@ regulator_register(const struct regulator_desc *regulator_desc,
goto clean;
}
+ if ((config->ena_gpio || config->ena_gpio_initialized) &&
+ gpio_is_valid(config->ena_gpio)) {
+ ret = regulator_ena_gpio_request(rdev, config);
+ if (ret != 0) {
+ rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
+ config->ena_gpio, ret);
+ goto clean;
+ }
+ }
+
/* register with sysfs */
rdev->dev.class = &regulator_class;
rdev->dev.parent = dev;
@@ -3948,21 +3953,11 @@ regulator_register(const struct regulator_desc *regulator_desc,
ret = device_register(&rdev->dev);
if (ret != 0) {
put_device(&rdev->dev);
- goto clean;
+ goto wash;
}
dev_set_drvdata(&rdev->dev, rdev);
- if ((config->ena_gpio || config->ena_gpio_initialized) &&
- gpio_is_valid(config->ena_gpio)) {
- ret = regulator_ena_gpio_request(rdev, config);
- if (ret != 0) {
- rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
- config->ena_gpio, ret);
- goto wash;
- }
- }
-
/* set regulator constraints */
if (init_data)
constraints = &init_data->constraints;
@@ -4001,13 +3996,13 @@ unset_supplies:
scrub:
regulator_ena_gpio_free(rdev);
- kfree(rdev->constraints);
-wash:
device_unregister(&rdev->dev);
/* device core frees rdev */
rdev = ERR_PTR(ret);
goto out;
+wash:
+ regulator_ena_gpio_free(rdev);
clean:
kfree(rdev);
rdev = ERR_PTR(ret);
diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index 8b3cc9f0cd64..01c0e3709b66 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -132,6 +132,8 @@ static irqreturn_t da9210_irq_handler(int irq, void *data)
if (error < 0)
goto error_i2c;
+ mutex_lock(&chip->rdev->mutex);
+
if (val & DA9210_E_OVCURR) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_OVER_CURRENT,
@@ -155,6 +157,9 @@ static irqreturn_t da9210_irq_handler(int irq, void *data)
NULL);
handled |= DA9210_E_VMAX;
}
+
+ mutex_unlock(&chip->rdev->mutex);
+
if (handled) {
/* Clear handled events */
error = regmap_write(chip->regmap, DA9210_REG_EVENT_B, handled);
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 4940e8287df6..2cb5cc311610 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -114,6 +114,22 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
return 0;
}
+static int fan53555_set_suspend_enable(struct regulator_dev *rdev)
+{
+ struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+
+ return regmap_update_bits(di->regmap, di->sleep_reg,
+ VSEL_BUCK_EN, VSEL_BUCK_EN);
+}
+
+static int fan53555_set_suspend_disable(struct regulator_dev *rdev)
+{
+ struct fan53555_device_info *di = rdev_get_drvdata(rdev);
+
+ return regmap_update_bits(di->regmap, di->sleep_reg,
+ VSEL_BUCK_EN, 0);
+}
+
static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
@@ -192,6 +208,8 @@ static struct regulator_ops fan53555_regulator_ops = {
.set_mode = fan53555_set_mode,
.get_mode = fan53555_get_mode,
.set_ramp_delay = fan53555_set_ramp,
+ .set_suspend_enable = fan53555_set_suspend_enable,
+ .set_suspend_disable = fan53555_set_suspend_disable,
};
static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 7bba8b747f30..a8718e98674a 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -283,8 +283,10 @@ static int gpio_regulator_probe(struct platform_device *pdev)
drvdata->nr_gpios = config->nr_gpios;
ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
if (ret) {
- dev_err(&pdev->dev,
- "Could not obtain regulator setting GPIOs: %d\n", ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Could not obtain regulator setting GPIOs: %d\n",
+ ret);
goto err_memstate;
}
}
diff --git a/drivers/regulator/hi655x-regulator.c b/drivers/regulator/hi655x-regulator.c
new file mode 100644
index 000000000000..aca18466f522
--- /dev/null
+++ b/drivers/regulator/hi655x-regulator.c
@@ -0,0 +1,227 @@
+/*
+ * Device driver for regulators in Hi655x IC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Authors:
+ * Chen Feng <puck.chen@hisilicon.com>
+ * Fei Wang <w.f@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/hi655x-pmic.h>
+
+struct hi655x_regulator {
+ unsigned int disable_reg;
+ unsigned int status_reg;
+ unsigned int ctrl_regs;
+ unsigned int ctrl_mask;
+ struct regulator_desc rdesc;
+};
+
+/* LDO7 & LDO10 */
+static const unsigned int ldo7_voltages[] = {
+ 1800000, 1850000, 2850000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
+};
+
+static const unsigned int ldo19_voltages[] = {
+ 1800000, 1850000, 1900000, 1750000,
+ 2800000, 2850000, 2900000, 3000000,
+};
+
+static const unsigned int ldo22_voltages[] = {
+ 900000, 1000000, 1050000, 1100000,
+ 1150000, 1175000, 1185000, 1200000,
+};
+
+enum hi655x_regulator_id {
+ HI655X_LDO0,
+ HI655X_LDO1,
+ HI655X_LDO2,
+ HI655X_LDO3,
+ HI655X_LDO4,
+ HI655X_LDO5,
+ HI655X_LDO6,
+ HI655X_LDO7,
+ HI655X_LDO8,
+ HI655X_LDO9,
+ HI655X_LDO10,
+ HI655X_LDO11,
+ HI655X_LDO12,
+ HI655X_LDO13,
+ HI655X_LDO14,
+ HI655X_LDO15,
+ HI655X_LDO16,
+ HI655X_LDO17,
+ HI655X_LDO18,
+ HI655X_LDO19,
+ HI655X_LDO20,
+ HI655X_LDO21,
+ HI655X_LDO22,
+};
+
+static int hi655x_is_enabled(struct regulator_dev *rdev)
+{
+ unsigned int value = 0;
+
+ struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
+
+ regmap_read(rdev->regmap, regulator->status_reg, &value);
+ return (value & BIT(regulator->ctrl_mask));
+}
+
+static int hi655x_disable(struct regulator_dev *rdev)
+{
+ int ret = 0;
+
+ struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
+
+ ret = regmap_write(rdev->regmap, regulator->disable_reg,
+ BIT(regulator->ctrl_mask));
+ return ret;
+}
+
+static struct regulator_ops hi655x_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = hi655x_disable,
+ .is_enabled = hi655x_is_enabled,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops hi655x_ldo_linear_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = hi655x_disable,
+ .is_enabled = hi655x_is_enabled,
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+#define HI655X_LDO(_ID, vreg, vmask, ereg, dreg, \
+ sreg, cmask, vtable) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .ops = &hi655x_regulator_ops, \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI655X_##_ID, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(vtable), \
+ .volt_table = vtable, \
+ .vsel_reg = HI655X_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI655X_BUS_ADDR(ereg), \
+ .enable_mask = BIT(cmask), \
+ }, \
+ .disable_reg = HI655X_BUS_ADDR(dreg), \
+ .status_reg = HI655X_BUS_ADDR(sreg), \
+ .ctrl_mask = cmask, \
+}
+
+#define HI655X_LDO_LINEAR(_ID, vreg, vmask, ereg, dreg, \
+ sreg, cmask, minv, nvolt, vstep) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .ops = &hi655x_ldo_linear_ops, \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI655X_##_ID, \
+ .owner = THIS_MODULE, \
+ .min_uV = minv, \
+ .n_voltages = nvolt, \
+ .uV_step = vstep, \
+ .vsel_reg = HI655X_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI655X_BUS_ADDR(ereg), \
+ .enable_mask = BIT(cmask), \
+ }, \
+ .disable_reg = HI655X_BUS_ADDR(dreg), \
+ .status_reg = HI655X_BUS_ADDR(sreg), \
+ .ctrl_mask = cmask, \
+}
+
+static struct hi655x_regulator regulators[] = {
+ HI655X_LDO_LINEAR(LDO2, 0x72, 0x07, 0x29, 0x2a, 0x2b, 0x01,
+ 2500000, 8, 100000),
+ HI655X_LDO(LDO7, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x06, ldo7_voltages),
+ HI655X_LDO(LDO10, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x01, ldo7_voltages),
+ HI655X_LDO_LINEAR(LDO13, 0x7e, 0x07, 0x2c, 0x2d, 0x2e, 0x04,
+ 1600000, 8, 50000),
+ HI655X_LDO_LINEAR(LDO14, 0x7f, 0x07, 0x2c, 0x2d, 0x2e, 0x05,
+ 2500000, 8, 100000),
+ HI655X_LDO_LINEAR(LDO15, 0x80, 0x07, 0x2c, 0x2d, 0x2e, 0x06,
+ 1600000, 8, 50000),
+ HI655X_LDO_LINEAR(LDO17, 0x82, 0x07, 0x2f, 0x30, 0x31, 0x00,
+ 2500000, 8, 100000),
+ HI655X_LDO(LDO19, 0x84, 0x07, 0x2f, 0x30, 0x31, 0x02, ldo19_voltages),
+ HI655X_LDO_LINEAR(LDO21, 0x86, 0x07, 0x2f, 0x30, 0x31, 0x04,
+ 1650000, 8, 50000),
+ HI655X_LDO(LDO22, 0x87, 0x07, 0x2f, 0x30, 0x31, 0x05, ldo22_voltages),
+};
+
+static int hi655x_regulator_probe(struct platform_device *pdev)
+{
+ unsigned int i;
+ struct hi655x_regulator *regulator;
+ struct hi655x_pmic *pmic;
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ if (!pmic) {
+ dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
+ return -ENODEV;
+ }
+
+ regulator = devm_kzalloc(&pdev->dev, sizeof(*regulator), GFP_KERNEL);
+ if (!regulator)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, regulator);
+
+ config.dev = pdev->dev.parent;
+ config.regmap = pmic->regmap;
+ config.driver_data = regulator;
+ for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+ rdev = devm_regulator_register(&pdev->dev,
+ &regulators[i].rdesc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ regulator->rdesc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static struct platform_driver hi655x_regulator_driver = {
+ .driver = {
+ .name = "hi655x-regulator",
+ },
+ .probe = hi655x_regulator_probe,
+};
+module_platform_driver(hi655x_regulator_driver);
+
+MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>");
+MODULE_DESCRIPTION("Hisilicon Hi655x regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 19d758486553..38992112fd6e 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -15,6 +15,7 @@
#include <linux/regmap.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/delay.h>
#include <linux/regulator/lp872x.h>
#include <linux/regulator/driver.h>
#include <linux/platform_device.h>
@@ -738,10 +739,8 @@ static int lp872x_init_dvs(struct lp872x *lp)
goto set_default_dvs_mode;
gpio = dvs->gpio;
- if (!gpio_is_valid(gpio)) {
- dev_warn(lp->dev, "invalid gpio: %d\n", gpio);
+ if (!gpio_is_valid(gpio))
goto set_default_dvs_mode;
- }
pinstate = dvs->init_state;
ret = devm_gpio_request_one(lp->dev, gpio, pinstate, "LP872X DVS");
@@ -759,6 +758,33 @@ set_default_dvs_mode:
default_dvs_mode[lp->chipid]);
}
+static int lp872x_hw_enable(struct lp872x *lp)
+{
+ int ret, gpio;
+
+ if (!lp->pdata)
+ return -EINVAL;
+
+ gpio = lp->pdata->enable_gpio;
+ if (!gpio_is_valid(gpio))
+ return 0;
+
+ /* Always set enable GPIO high. */
+ ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN");
+ if (ret) {
+ dev_err(lp->dev, "gpio request err: %d\n", ret);
+ return ret;
+ }
+
+ /* Each chip has a different enable delay. */
+ if (lp->chipid == LP8720)
+ usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY);
+ else
+ usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY);
+
+ return 0;
+}
+
static int lp872x_config(struct lp872x *lp)
{
struct lp872x_platform_data *pdata = lp->pdata;
@@ -877,6 +903,8 @@ static struct lp872x_platform_data
of_property_read_u8(np, "ti,dvs-state", &dvs_state);
pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW;
+ pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0);
+
if (of_get_child_count(np) == 0)
goto out;
@@ -950,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
lp->chipid = id->driver_data;
i2c_set_clientdata(cl, lp);
+ ret = lp872x_hw_enable(lp);
+ if (ret)
+ return ret;
+
ret = lp872x_config(lp);
if (ret)
return ret;
diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c
index 972c386b2690..47bef328fb58 100644
--- a/drivers/regulator/ltc3589.c
+++ b/drivers/regulator/ltc3589.c
@@ -520,12 +520,15 @@ static int ltc3589_probe(struct i2c_client *client,
}
}
- ret = devm_request_threaded_irq(dev, client->irq, NULL, ltc3589_isr,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- client->name, ltc3589);
- if (ret) {
- dev_err(dev, "Failed to request IRQ: %d\n", ret);
- return ret;
+ if (client->irq) {
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ ltc3589_isr,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ client->name, ltc3589);
+ if (ret) {
+ dev_err(dev, "Failed to request IRQ: %d\n", ret);
+ return ret;
+ }
}
return 0;
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686-regulator.c
index 17ccf365a9c0..17ccf365a9c0 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686-regulator.c
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802-regulator.c
index c07ee13bd470..c07ee13bd470 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802-regulator.c
diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c
index ac15f31b5fe0..0057c6740d6f 100644
--- a/drivers/regulator/pv88090-regulator.c
+++ b/drivers/regulator/pv88090-regulator.c
@@ -283,8 +283,8 @@ static irqreturn_t pv88090_irq_handler(int irq, void *data)
}
}
- err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A,
- PV88090_E_VDD_FLT, PV88090_E_VDD_FLT);
+ err = regmap_write(chip->regmap, PV88090_REG_EVENT_A,
+ PV88090_E_VDD_FLT);
if (err < 0)
goto error_i2c;
@@ -300,8 +300,8 @@ static irqreturn_t pv88090_irq_handler(int irq, void *data)
}
}
- err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A,
- PV88090_E_OVER_TEMP, PV88090_E_OVER_TEMP);
+ err = regmap_write(chip->regmap, PV88090_REG_EVENT_A,
+ PV88090_E_OVER_TEMP);
if (err < 0)
goto error_i2c;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 03:45:09 +0100