1 files changed, 322 insertions, 0 deletions

diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c
new file mode 100644
index 000000000000..a7743c069339
--- /dev/null
+++ b/drivers/remoteproc/ste_modem_rproc.c
@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2012
+ * Author: Sjur Brændeland <sjur.brandeland@stericsson.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/remoteproc.h>
+#include <linux/ste_modem_shm.h>
+#include "remoteproc_internal.h"
+
+#define SPROC_FW_SIZE (50 * 4096)
+#define SPROC_MAX_TOC_ENTRIES 32
+#define SPROC_MAX_NOTIFY_ID 14
+#define SPROC_RESOURCE_NAME "rsc-table"
+#define SPROC_MODEM_NAME "ste-modem"
+#define SPROC_MODEM_FIRMWARE SPROC_MODEM_NAME "-fw.bin"
+
+#define sproc_dbg(sproc, fmt, ...) \
+	dev_dbg(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__)
+#define sproc_err(sproc, fmt, ...) \
+	dev_err(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__)
+
+/* STE-modem control structure */
+struct sproc {
+	struct rproc *rproc;
+	struct ste_modem_device *mdev;
+	int error;
+	void *fw_addr;
+	size_t fw_size;
+	dma_addr_t fw_dma_addr;
+};
+
+/* STE-Modem firmware entry */
+struct ste_toc_entry {
+	__le32 start;
+	__le32 size;
+	__le32 flags;
+	__le32 entry_point;
+	__le32 load_addr;
+	char name[12];
+};
+
+/*
+ * The Table Of Content is located at the start of the firmware image and
+ * at offset zero in the shared memory region. The resource table typically
+ * contains the initial boot image (boot strap) and other information elements
+ * such as remoteproc resource table. Each entry is identified by a unique
+ * name.
+ */
+struct ste_toc {
+	struct ste_toc_entry table[SPROC_MAX_TOC_ENTRIES];
+};
+
+/* Loads the firmware to shared memory. */
+static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw)
+{
+	struct sproc *sproc = rproc->priv;
+
+	memcpy(sproc->fw_addr, fw->data, fw->size);
+
+	return 0;
+}
+
+/* Find the entry for resource table in the Table of Content */
+static struct ste_toc_entry *sproc_find_rsc_entry(const struct firmware *fw)
+{
+	int i;
+	struct ste_toc *toc;
+
+	if (!fw)
+		return NULL;
+
+	toc = (void *)fw->data;
+
+	/* Search the table for the resource table */
+	for (i = 0; i < SPROC_MAX_TOC_ENTRIES &&
+		    toc->table[i].start != 0xffffffff; i++) {
+
+		if (!strncmp(toc->table[i].name, SPROC_RESOURCE_NAME,
+			     sizeof(toc->table[i].name))) {
+			if (toc->table[i].start > fw->size)
+				return NULL;
+			return &toc->table[i];
+		}
+	}
+
+	return NULL;
+}
+
+/* Find the resource table inside the remote processor's firmware. */
+static struct resource_table *
+sproc_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
+		     int *tablesz)
+{
+	struct sproc *sproc = rproc->priv;
+	struct resource_table *table;
+	struct ste_toc_entry *entry;
+
+	entry = sproc_find_rsc_entry(fw);
+	if (!entry) {
+		sproc_err(sproc, "resource table not found in fw\n");
+		return NULL;
+	}
+
+	table = (void *)(fw->data + entry->start);
+
+	/* sanity check size and offset of resource table */
+	if (entry->start > SPROC_FW_SIZE ||
+	    entry->size > SPROC_FW_SIZE ||
+	    fw->size > SPROC_FW_SIZE ||
+	    entry->start + entry->size > fw->size ||
+	    sizeof(struct resource_table) > entry->size) {
+		sproc_err(sproc, "bad size of fw or resource table\n");
+		return NULL;
+	}
+
+	/* we don't support any version beyond the first */
+	if (table->ver != 1) {
+		sproc_err(sproc, "unsupported fw ver: %d\n", table->ver);
+		return NULL;
+	}
+
+	/* make sure reserved bytes are zeroes */
+	if (table->reserved[0] || table->reserved[1]) {
+		sproc_err(sproc, "non zero reserved bytes\n");
+		return NULL;
+	}
+
+	/* make sure the offsets array isn't truncated */
+	if (table->num > SPROC_MAX_TOC_ENTRIES ||
+	    table->num * sizeof(table->offset[0]) +
+	    sizeof(struct resource_table) > entry->size) {
+		sproc_err(sproc, "resource table incomplete\n");
+		return NULL;
+	}
+
+	/* If the fw size has grown, release the previous fw allocation */
+	if (SPROC_FW_SIZE < fw->size) {
+		sproc_err(sproc, "Insufficient space for fw (%d < %zd)\n",
+			  SPROC_FW_SIZE, fw->size);
+		return NULL;
+	}
+
+	sproc->fw_size = fw->size;
+	*tablesz = entry->size;
+
+	return table;
+}
+
+/* STE modem firmware handler operations */
+const struct rproc_fw_ops sproc_fw_ops = {
+	.load = sproc_load_segments,
+	.find_rsc_table = sproc_find_rsc_table,
+};
+
+/* Kick the modem with specified notification id */
+static void sproc_kick(struct rproc *rproc, int vqid)
+{
+	struct sproc *sproc = rproc->priv;
+
+	sproc_dbg(sproc, "kick vqid:%d\n", vqid);
+
+	/*
+	 * We need different notification IDs for RX and TX so add
+	 * an offset on TX notification IDs.
+	 */
+	sproc->mdev->ops.kick(sproc->mdev, vqid + SPROC_MAX_NOTIFY_ID);
+}
+
+/* Received a kick from a modem, kick the virtqueue */
+static void sproc_kick_callback(struct ste_modem_device *mdev, int vqid)
+{
+	struct sproc *sproc = mdev->drv_data;
+
+	if (rproc_vq_interrupt(sproc->rproc, vqid) == IRQ_NONE)
+		sproc_dbg(sproc, "no message was found in vqid %d\n", vqid);
+}
+
+struct ste_modem_dev_cb sproc_dev_cb = {
+	.kick = sproc_kick_callback,
+};
+
+/* Start the STE modem */
+static int sproc_start(struct rproc *rproc)
+{
+	struct sproc *sproc = rproc->priv;
+	int i, err;
+
+	sproc_dbg(sproc, "start ste-modem\n");
+
+	/* Sanity test the max_notifyid */
+	if (rproc->max_notifyid > SPROC_MAX_NOTIFY_ID) {
+		sproc_err(sproc, "Notification IDs too high:%d\n",
+			  rproc->max_notifyid);
+		return -EINVAL;
+	}
+
+	/* Subscribe to notifications */
+	for (i = 0; i < rproc->max_notifyid; i++) {
+		err = sproc->mdev->ops.kick_subscribe(sproc->mdev, i);
+		if (err) {
+			sproc_err(sproc,
+				  "subscription of kicks failed:%d\n", err);
+			return err;
+		}
+	}
+
+	/* Request modem start-up*/
+	return sproc->mdev->ops.power(sproc->mdev, true);
+}
+
+/* Stop the STE modem */
+static int sproc_stop(struct rproc *rproc)
+{
+	struct sproc *sproc = rproc->priv;
+	sproc_dbg(sproc, "stop ste-modem\n");
+
+	return sproc->mdev->ops.power(sproc->mdev, false);
+}
+
+static struct rproc_ops sproc_ops = {
+	.start		= sproc_start,
+	.stop		= sproc_stop,
+	.kick		= sproc_kick,
+};
+
+/* STE modem device is unregistered */
+static int sproc_drv_remove(struct platform_device *pdev)
+{
+	struct ste_modem_device *mdev =
+		container_of(pdev, struct ste_modem_device, pdev);
+	struct sproc *sproc = mdev->drv_data;
+
+	sproc_dbg(sproc, "remove ste-modem\n");
+
+	/* Reset device callback functions */
+	sproc->mdev->ops.setup(sproc->mdev, NULL);
+
+	/* Unregister as remoteproc device */
+	rproc_del(sproc->rproc);
+	rproc_put(sproc->rproc);
+
+	mdev->drv_data = NULL;
+
+	return 0;
+}
+
+/* Handle probe of a modem device */
+static int sproc_probe(struct platform_device *pdev)
+{
+	struct ste_modem_device *mdev =
+		container_of(pdev, struct ste_modem_device, pdev);
+	struct sproc *sproc;
+	struct rproc *rproc;
+	int err;
+
+	dev_dbg(&mdev->pdev.dev, "probe ste-modem\n");
+
+	if (!mdev->ops.setup || !mdev->ops.kick || !mdev->ops.kick_subscribe ||
+	    !mdev->ops.power) {
+		dev_err(&mdev->pdev.dev, "invalid mdev ops\n");
+		return -EINVAL;
+	}
+
+	rproc = rproc_alloc(&mdev->pdev.dev, mdev->pdev.name, &sproc_ops,
+			    SPROC_MODEM_FIRMWARE, sizeof(*sproc));
+	if (!rproc)
+		return -ENOMEM;
+
+	sproc = rproc->priv;
+	sproc->mdev = mdev;
+	sproc->rproc = rproc;
+	mdev->drv_data = sproc;
+
+	/* Provide callback functions to modem device */
+	sproc->mdev->ops.setup(sproc->mdev, &sproc_dev_cb);
+
+	/* Set the STE-modem specific firmware handler */
+	rproc->fw_ops = &sproc_fw_ops;
+
+	/*
+	 * STE-modem requires the firmware to be located
+	 * at the start of the shared memory region. So we need to
+	 * reserve space for firmware at the start.
+	 */
+	sproc->fw_addr = dma_alloc_coherent(rproc->dev.parent, SPROC_FW_SIZE,
+					    &sproc->fw_dma_addr,
+					    GFP_KERNEL);
+	if (!sproc->fw_addr) {
+		sproc_err(sproc, "Cannot allocate memory for fw\n");
+		err = -ENOMEM;
+		goto free_rproc;
+	}
+
+	/* Register as a remoteproc device */
+	err = rproc_add(rproc);
+	if (err)
+		goto free_rproc;
+
+	return 0;
+
+free_rproc:
+	/* Reset device data upon error */
+	mdev->drv_data = NULL;
+	rproc_put(rproc);
+	return err;
+}
+
+static struct platform_driver sproc_driver = {
+	.driver	= {
+		.name	= SPROC_MODEM_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= sproc_probe,
+	.remove	= sproc_drv_remove,
+};
+
+module_platform_driver(sproc_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STE Modem driver using the Remote Processor Framework");