summaryrefslogtreecommitdiffstats
path: root/drivers/rtc/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc/Kconfig')
-rw-r--r--drivers/rtc/Kconfig100
1 files changed, 72 insertions, 28 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 123092d8a984..4ad831de41ad 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -35,8 +35,8 @@ config RTC_HCTOSYS_DEVICE
default "rtc0"
help
The RTC device that will be used to (re)initialize the system
- clock, usually rtc0. Initialization is done when the system
- starts up, and when it resumes from a low power state. This
+ clock, usually rtc0. Initialization is done when the system
+ starts up, and when it resumes from a low power state. This
device should record time in UTC, since the kernel won't do
timezone correction.
@@ -44,7 +44,7 @@ config RTC_HCTOSYS_DEVICE
functions run, so it must usually be statically linked.
This clock should be battery-backed, so that it reads the correct
- time when the system boots from a power-off state. Otherwise, your
+ time when the system boots from a power-off state. Otherwise, your
system will need an external clock source (like an NTP server).
If the clock you specify here is not battery backed, it may still
@@ -69,8 +69,7 @@ config RTC_INTF_SYSFS
Say yes here if you want to use your RTCs using sysfs interfaces,
/sys/class/rtc/rtc0 through /sys/.../rtcN.
- This driver can also be built as a module. If so, the module
- will be called rtc-sysfs.
+ If unsure, say Y.
config RTC_INTF_PROC
boolean "/proc/driver/rtc (procfs for rtc0)"
@@ -78,11 +77,10 @@ config RTC_INTF_PROC
default RTC_CLASS
help
Say yes here if you want to use your first RTC through the proc
- interface, /proc/driver/rtc. Other RTCs will not be available
+ interface, /proc/driver/rtc. Other RTCs will not be available
through that API.
- This driver can also be built as a module. If so, the module
- will be called rtc-proc.
+ If unsure, say Y.
config RTC_INTF_DEV
boolean "/dev/rtcN (character devices)"
@@ -90,21 +88,27 @@ config RTC_INTF_DEV
help
Say yes here if you want to use your RTCs using the /dev
interfaces, which "udev" sets up as /dev/rtc0 through
- /dev/rtcN. You may want to set up a symbolic link so one
- of these can be accessed as /dev/rtc, which is a name
- expected by "hwclock" and some other programs.
+ /dev/rtcN.
- This driver can also be built as a module. If so, the module
- will be called rtc-dev.
+ You may want to set up a symbolic link so one of these
+ can be accessed as /dev/rtc, which is a name
+ expected by "hwclock" and some other programs. Recent
+ versions of "udev" are known to set up the symlink for you.
+
+ If unsure, say Y.
config RTC_INTF_DEV_UIE_EMUL
bool "RTC UIE emulation on dev interface"
depends on RTC_INTF_DEV
help
Provides an emulation for RTC_UIE if the underlying rtc chip
- driver does not expose RTC_UIE ioctls. Those requests generate
+ driver does not expose RTC_UIE ioctls. Those requests generate
once-per-second update interrupts, used for synchronization.
+ The emulation code will read the time from the hardware
+ clock several times per second, please enable this option
+ only if you know that you really need it.
+
config RTC_DRV_TEST
tristate "Test driver/device"
help
@@ -128,14 +132,14 @@ config RTC_DRV_DS1307
tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00"
help
If you say yes here you get support for various compatible RTC
- chips (often with battery backup) connected with I2C. This driver
+ chips (often with battery backup) connected with I2C. This driver
should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00,
- and probably other chips. In some cases the RTC must already
+ and probably other chips. In some cases the RTC must already
have been initialized (by manufacturing or a bootloader).
The first seven registers on these chips hold an RTC, and other
registers may add features such as NVRAM, a trickle charger for
- the RTC/NVRAM backup power, and alarms. NVRAM is visible in
+ the RTC/NVRAM backup power, and alarms. NVRAM is visible in
sysfs, but other chip features may not be available.
This driver can also be built as a module. If so, the module
@@ -146,10 +150,10 @@ config RTC_DRV_DS1374
depends on RTC_CLASS && I2C
help
If you say yes here you get support for Dallas Semiconductor
- DS1374 real-time clock chips. If an interrupt is associated
+ DS1374 real-time clock chips. If an interrupt is associated
with the device, the alarm functionality is supported.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called rtc-ds1374.
config RTC_DRV_DS1672
@@ -243,7 +247,7 @@ config RTC_DRV_TWL92330
help
If you say yes here you get support for the RTC on the
TWL92330 "Menelaus" power management chip, used with OMAP2
- platforms. The support is integrated with the rest of
+ platforms. The support is integrated with the rest of
the Menelaus driver; it's not separate module.
config RTC_DRV_TWL4030
@@ -304,7 +308,7 @@ config RTC_DRV_DS1305
tristate "Dallas/Maxim DS1305/DS1306"
help
Select this driver to get support for the Dallas/Maxim DS1305
- and DS1306 real time clock chips. These support a trickle
+ and DS1306 real time clock chips. These support a trickle
charger, alarms, and NVRAM in addition to the clock.
This driver can also be built as a module. If so, the module
@@ -313,7 +317,8 @@ config RTC_DRV_DS1305
config RTC_DRV_DS1390
tristate "Dallas/Maxim DS1390/93/94"
help
- If you say yes here you get support for the DS1390/93/94 chips.
+ If you say yes here you get support for the
+ Dallas/Maxim DS1390/93/94 chips.
This driver only supports the RTC feature, and not other chip
features such as alarms and trickle charging.
@@ -377,7 +382,7 @@ config RTC_DRV_CMOS
or LPC bus chips, and so on.
Your system will need to define the platform device used by
- this driver, otherwise it won't be accessible. This means
+ this driver, otherwise it won't be accessible. This means
you can safely enable this driver if you don't know whether
or not your board has this kind of hardware.
@@ -594,7 +599,7 @@ config RTC_DRV_AT91RM9200
depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL
help
Driver for the internal RTC (Realtime Clock) module found on
- Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
+ Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
this is powered by the backup power supply.
config RTC_DRV_AT91SAM9
@@ -616,8 +621,8 @@ config RTC_DRV_AT91SAM9_RTT
prompt "RTT module Number" if ARCH_AT91SAM9263
depends on RTC_DRV_AT91SAM9
help
- More than one RTT module is available. You can choose which
- one will be used as an RTC. The default of zero is normally
+ More than one RTT module is available. You can choose which
+ one will be used as an RTC. The default of zero is normally
OK to use, though some systems use that for non-RTC purposes.
config RTC_DRV_AT91SAM9_GPBR
@@ -629,10 +634,20 @@ config RTC_DRV_AT91SAM9_GPBR
depends on RTC_DRV_AT91SAM9
help
The RTC driver needs to use one of the General Purpose Backup
- Registers (GPBRs) as well as the RTT. You can choose which one
- will be used. The default of zero is normally OK to use, but
+ Registers (GPBRs) as well as the RTT. You can choose which one
+ will be used. The default of zero is normally OK to use, but
on some systems other software needs to use that register.
+config RTC_DRV_AU1XXX
+ tristate "Au1xxx Counter0 RTC support"
+ depends on SOC_AU1X00
+ help
+ This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
+ counter) to be used as a RTC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-au1xxx.
+
config RTC_DRV_BFIN
tristate "Blackfin On-Chip RTC"
depends on BLACKFIN && !BF561
@@ -665,6 +680,17 @@ config RTC_DRV_PPC
the RTC. This exposes that functionality through the generic RTC
class.
+config RTC_DRV_PXA
+ tristate "PXA27x/PXA3xx"
+ depends on ARCH_PXA
+ help
+ If you say Y here you will get access to the real time clock
+ built into your PXA27x or PXA3xx CPU.
+
+ This RTC driver uses PXA RTC registers available since pxa27x
+ series (RDxR, RYxR) instead of legacy RCNR, RTAR.
+
+
config RTC_DRV_SUN4V
bool "SUN4V Hypervisor RTC"
depends on SPARC64
@@ -679,4 +705,22 @@ config RTC_DRV_STARFIRE
If you say Y here you will get support for the RTC found on
Starfire systems.
+config RTC_DRV_TX4939
+ tristate "TX4939 SoC"
+ depends on SOC_TX4939
+ help
+ Driver for the internal RTC (Realtime Clock) module found on
+ Toshiba TX4939 SoC.
+
+config RTC_DRV_MV
+ tristate "Marvell SoC RTC"
+ depends on ARCH_KIRKWOOD
+ help
+ If you say yes here you will get support for the in-chip RTC
+ that can be found in some of Marvell's SoC devices, such as
+ the Kirkwood 88F6281 and 88F6192.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-mv.
+
endif # RTC_CLASS