diff options
Diffstat (limited to 'drivers/rtc')
-rw-r--r-- | drivers/rtc/Kconfig | 10 | ||||
-rw-r--r-- | drivers/rtc/Makefile | 1 | ||||
-rw-r--r-- | drivers/rtc/rtc-isl12057.c | 643 |
3 files changed, 0 insertions, 654 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 83a788416721..23acc3f536b3 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -388,16 +388,6 @@ config RTC_DRV_ISL12022 This driver can also be built as a module. If so, the module will be called rtc-isl12022. -config RTC_DRV_ISL12057 - select REGMAP_I2C - tristate "Intersil ISL12057" - help - If you say yes here you get support for the Intersil ISL12057 - I2C RTC chip. - - This driver can also be built as a module. If so, the module - will be called rtc-isl12057. - config RTC_DRV_X1205 tristate "Xicor/Intersil X1205" help diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 8fb994bacdf7..1ac694a330c8 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -72,7 +72,6 @@ obj-$(CONFIG_RTC_DRV_HID_SENSOR_TIME) += rtc-hid-sensor-time.o obj-$(CONFIG_RTC_DRV_HYM8563) += rtc-hym8563.o obj-$(CONFIG_RTC_DRV_IMXDI) += rtc-imxdi.o obj-$(CONFIG_RTC_DRV_ISL12022) += rtc-isl12022.o -obj-$(CONFIG_RTC_DRV_ISL12057) += rtc-isl12057.o obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o obj-$(CONFIG_RTC_DRV_JZ4740) += rtc-jz4740.o obj-$(CONFIG_RTC_DRV_LP8788) += rtc-lp8788.o diff --git a/drivers/rtc/rtc-isl12057.c b/drivers/rtc/rtc-isl12057.c deleted file mode 100644 index 0e7f0f52bfe4..000000000000 --- a/drivers/rtc/rtc-isl12057.c +++ /dev/null @@ -1,643 +0,0 @@ -/* - * rtc-isl12057 - Driver for Intersil ISL12057 I2C Real Time Clock - * - * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> - * - * This work is largely based on Intersil ISL1208 driver developed by - * Hebert Valerio Riedel <hvr@gnu.org>. - * - * Detailed datasheet on which this development is based is available here: - * - * http://natisbad.org/NAS2/refs/ISL12057.pdf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/rtc.h> -#include <linux/i2c.h> -#include <linux/bcd.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/regmap.h> - -#define DRV_NAME "rtc-isl12057" - -/* RTC section */ -#define ISL12057_REG_RTC_SC 0x00 /* Seconds */ -#define ISL12057_REG_RTC_MN 0x01 /* Minutes */ -#define ISL12057_REG_RTC_HR 0x02 /* Hours */ -#define ISL12057_REG_RTC_HR_PM BIT(5) /* AM/PM bit in 12h format */ -#define ISL12057_REG_RTC_HR_MIL BIT(6) /* 24h/12h format */ -#define ISL12057_REG_RTC_DW 0x03 /* Day of the Week */ -#define ISL12057_REG_RTC_DT 0x04 /* Date */ -#define ISL12057_REG_RTC_MO 0x05 /* Month */ -#define ISL12057_REG_RTC_MO_CEN BIT(7) /* Century bit */ -#define ISL12057_REG_RTC_YR 0x06 /* Year */ -#define ISL12057_RTC_SEC_LEN 7 - -/* Alarm 1 section */ -#define ISL12057_REG_A1_SC 0x07 /* Alarm 1 Seconds */ -#define ISL12057_REG_A1_MN 0x08 /* Alarm 1 Minutes */ -#define ISL12057_REG_A1_HR 0x09 /* Alarm 1 Hours */ -#define ISL12057_REG_A1_HR_PM BIT(5) /* AM/PM bit in 12h format */ -#define ISL12057_REG_A1_HR_MIL BIT(6) /* 24h/12h format */ -#define ISL12057_REG_A1_DWDT 0x0A /* Alarm 1 Date / Day of the week */ -#define ISL12057_REG_A1_DWDT_B BIT(6) /* DW / DT selection bit */ -#define ISL12057_A1_SEC_LEN 4 - -/* Alarm 2 section */ -#define ISL12057_REG_A2_MN 0x0B /* Alarm 2 Minutes */ -#define ISL12057_REG_A2_HR 0x0C /* Alarm 2 Hours */ -#define ISL12057_REG_A2_DWDT 0x0D /* Alarm 2 Date / Day of the week */ -#define ISL12057_A2_SEC_LEN 3 - -/* Control/Status registers */ -#define ISL12057_REG_INT 0x0E -#define ISL12057_REG_INT_A1IE BIT(0) /* Alarm 1 interrupt enable bit */ -#define ISL12057_REG_INT_A2IE BIT(1) /* Alarm 2 interrupt enable bit */ -#define ISL12057_REG_INT_INTCN BIT(2) /* Interrupt control enable bit */ -#define ISL12057_REG_INT_RS1 BIT(3) /* Freq out control bit 1 */ -#define ISL12057_REG_INT_RS2 BIT(4) /* Freq out control bit 2 */ -#define ISL12057_REG_INT_EOSC BIT(7) /* Oscillator enable bit */ - -#define ISL12057_REG_SR 0x0F -#define ISL12057_REG_SR_A1F BIT(0) /* Alarm 1 interrupt bit */ -#define ISL12057_REG_SR_A2F BIT(1) /* Alarm 2 interrupt bit */ -#define ISL12057_REG_SR_OSF BIT(7) /* Oscillator failure bit */ - -/* Register memory map length */ -#define ISL12057_MEM_MAP_LEN 0x10 - -struct isl12057_rtc_data { - struct rtc_device *rtc; - struct regmap *regmap; - struct mutex lock; - int irq; -}; - -static void isl12057_rtc_regs_to_tm(struct rtc_time *tm, u8 *regs) -{ - tm->tm_sec = bcd2bin(regs[ISL12057_REG_RTC_SC]); - tm->tm_min = bcd2bin(regs[ISL12057_REG_RTC_MN]); - - if (regs[ISL12057_REG_RTC_HR] & ISL12057_REG_RTC_HR_MIL) { /* AM/PM */ - tm->tm_hour = bcd2bin(regs[ISL12057_REG_RTC_HR] & 0x1f); - if (regs[ISL12057_REG_RTC_HR] & ISL12057_REG_RTC_HR_PM) - tm->tm_hour += 12; - } else { /* 24 hour mode */ - tm->tm_hour = bcd2bin(regs[ISL12057_REG_RTC_HR] & 0x3f); - } - - tm->tm_mday = bcd2bin(regs[ISL12057_REG_RTC_DT]); - tm->tm_wday = bcd2bin(regs[ISL12057_REG_RTC_DW]) - 1; /* starts at 1 */ - tm->tm_mon = bcd2bin(regs[ISL12057_REG_RTC_MO] & 0x1f) - 1; /* ditto */ - tm->tm_year = bcd2bin(regs[ISL12057_REG_RTC_YR]) + 100; - - /* Check if years register has overflown from 99 to 00 */ - if (regs[ISL12057_REG_RTC_MO] & ISL12057_REG_RTC_MO_CEN) - tm->tm_year += 100; -} - -static int isl12057_rtc_tm_to_regs(u8 *regs, struct rtc_time *tm) -{ - u8 century_bit; - - /* - * The clock has an 8 bit wide bcd-coded register for the year. - * It also has a century bit encoded in MO flag which provides - * information about overflow of year register from 99 to 00. - * tm_year is an offset from 1900 and we are interested in the - * 2000-2199 range, so any value less than 100 or larger than - * 299 is invalid. - */ - if (tm->tm_year < 100 || tm->tm_year > 299) - return -EINVAL; - - century_bit = (tm->tm_year > 199) ? ISL12057_REG_RTC_MO_CEN : 0; - - regs[ISL12057_REG_RTC_SC] = bin2bcd(tm->tm_sec); - regs[ISL12057_REG_RTC_MN] = bin2bcd(tm->tm_min); - regs[ISL12057_REG_RTC_HR] = bin2bcd(tm->tm_hour); /* 24-hour format */ - regs[ISL12057_REG_RTC_DT] = bin2bcd(tm->tm_mday); - regs[ISL12057_REG_RTC_MO] = bin2bcd(tm->tm_mon + 1) | century_bit; - regs[ISL12057_REG_RTC_YR] = bin2bcd(tm->tm_year % 100); - regs[ISL12057_REG_RTC_DW] = bin2bcd(tm->tm_wday + 1); - - return 0; -} - -/* - * Try and match register bits w/ fixed null values to see whether we - * are dealing with an ISL12057. Note: this function is called early - * during init and hence does need mutex protection. - */ -static int isl12057_i2c_validate_chip(struct regmap *regmap) -{ - u8 regs[ISL12057_MEM_MAP_LEN]; - static const u8 mask[ISL12057_MEM_MAP_LEN] = { 0x80, 0x80, 0x80, 0xf8, - 0xc0, 0x60, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x60, 0x7c }; - int ret, i; - - ret = regmap_bulk_read(regmap, 0, regs, ISL12057_MEM_MAP_LEN); - if (ret) - return ret; - - for (i = 0; i < ISL12057_MEM_MAP_LEN; ++i) { - if (regs[i] & mask[i]) /* check if bits are cleared */ - return -ENODEV; - } - - return 0; -} - -static int _isl12057_rtc_clear_alarm(struct device *dev) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - int ret; - - ret = regmap_update_bits(data->regmap, ISL12057_REG_SR, - ISL12057_REG_SR_A1F, 0); - if (ret) - dev_err(dev, "%s: clearing alarm failed (%d)\n", __func__, ret); - - return ret; -} - -static int _isl12057_rtc_update_alarm(struct device *dev, int enable) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - int ret; - - ret = regmap_update_bits(data->regmap, ISL12057_REG_INT, - ISL12057_REG_INT_A1IE, - enable ? ISL12057_REG_INT_A1IE : 0); - if (ret) - dev_err(dev, "%s: changing alarm interrupt flag failed (%d)\n", - __func__, ret); - - return ret; -} - -/* - * Note: as we only read from device and do not perform any update, there is - * no need for an equivalent function which would try and get driver's main - * lock. Here, it is safe for everyone if we just use regmap internal lock - * on the device when reading. - */ -static int _isl12057_rtc_read_time(struct device *dev, struct rtc_time *tm) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - u8 regs[ISL12057_RTC_SEC_LEN]; - unsigned int sr; - int ret; - - ret = regmap_read(data->regmap, ISL12057_REG_SR, &sr); - if (ret) { - dev_err(dev, "%s: unable to read oscillator status flag (%d)\n", - __func__, ret); - goto out; - } else { - if (sr & ISL12057_REG_SR_OSF) { - ret = -ENODATA; - goto out; - } - } - - ret = regmap_bulk_read(data->regmap, ISL12057_REG_RTC_SC, regs, - ISL12057_RTC_SEC_LEN); - if (ret) - dev_err(dev, "%s: unable to read RTC time section (%d)\n", - __func__, ret); - -out: - if (ret) - return ret; - - isl12057_rtc_regs_to_tm(tm, regs); - - return rtc_valid_tm(tm); -} - -static int isl12057_rtc_update_alarm(struct device *dev, int enable) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - int ret; - - mutex_lock(&data->lock); - ret = _isl12057_rtc_update_alarm(dev, enable); - mutex_unlock(&data->lock); - - return ret; -} - -static int isl12057_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - struct rtc_time *alarm_tm = &alarm->time; - u8 regs[ISL12057_A1_SEC_LEN]; - unsigned int ir; - int ret; - - mutex_lock(&data->lock); - ret = regmap_bulk_read(data->regmap, ISL12057_REG_A1_SC, regs, - ISL12057_A1_SEC_LEN); - if (ret) { - dev_err(dev, "%s: reading alarm section failed (%d)\n", - __func__, ret); - goto err_unlock; - } - - alarm_tm->tm_sec = bcd2bin(regs[0] & 0x7f); - alarm_tm->tm_min = bcd2bin(regs[1] & 0x7f); - alarm_tm->tm_hour = bcd2bin(regs[2] & 0x3f); - alarm_tm->tm_mday = bcd2bin(regs[3] & 0x3f); - - ret = regmap_read(data->regmap, ISL12057_REG_INT, &ir); - if (ret) { - dev_err(dev, "%s: reading alarm interrupt flag failed (%d)\n", - __func__, ret); - goto err_unlock; - } - - alarm->enabled = !!(ir & ISL12057_REG_INT_A1IE); - -err_unlock: - mutex_unlock(&data->lock); - - return ret; -} - -static int isl12057_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - struct rtc_time *alarm_tm = &alarm->time; - unsigned long rtc_secs, alarm_secs; - u8 regs[ISL12057_A1_SEC_LEN]; - struct rtc_time rtc_tm; - int ret, enable = 1; - - mutex_lock(&data->lock); - ret = _isl12057_rtc_read_time(dev, &rtc_tm); - if (ret) - goto err_unlock; - - ret = rtc_tm_to_time(&rtc_tm, &rtc_secs); - if (ret) - goto err_unlock; - - ret = rtc_tm_to_time(alarm_tm, &alarm_secs); - if (ret) - goto err_unlock; - - /* If alarm time is before current time, disable the alarm */ - if (!alarm->enabled || alarm_secs <= rtc_secs) { - enable = 0; - } else { - /* - * Chip only support alarms up to one month in the future. Let's - * return an error if we get something after that limit. - * Comparison is done by incrementing rtc_tm month field by one - * and checking alarm value is still below. - */ - if (rtc_tm.tm_mon == 11) { /* handle year wrapping */ - rtc_tm.tm_mon = 0; - rtc_tm.tm_year += 1; - } else { - rtc_tm.tm_mon += 1; - } - - ret = rtc_tm_to_time(&rtc_tm, &rtc_secs); - if (ret) - goto err_unlock; - - if (alarm_secs > rtc_secs) { - dev_err(dev, "%s: max for alarm is one month (%d)\n", - __func__, ret); - ret = -EINVAL; - goto err_unlock; - } - } - - /* Disable the alarm before modifying it */ - ret = _isl12057_rtc_update_alarm(dev, 0); - if (ret < 0) { - dev_err(dev, "%s: unable to disable the alarm (%d)\n", - __func__, ret); - goto err_unlock; - } - - /* Program alarm registers */ - regs[0] = bin2bcd(alarm_tm->tm_sec) & 0x7f; - regs[1] = bin2bcd(alarm_tm->tm_min) & 0x7f; - regs[2] = bin2bcd(alarm_tm->tm_hour) & 0x3f; - regs[3] = bin2bcd(alarm_tm->tm_mday) & 0x3f; - - ret = regmap_bulk_write(data->regmap, ISL12057_REG_A1_SC, regs, - ISL12057_A1_SEC_LEN); - if (ret < 0) { - dev_err(dev, "%s: writing alarm section failed (%d)\n", - __func__, ret); - goto err_unlock; - } - - /* Enable or disable alarm */ - ret = _isl12057_rtc_update_alarm(dev, enable); - -err_unlock: - mutex_unlock(&data->lock); - - return ret; -} - -static int isl12057_rtc_set_time(struct device *dev, struct rtc_time *tm) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - u8 regs[ISL12057_RTC_SEC_LEN]; - int ret; - - ret = isl12057_rtc_tm_to_regs(regs, tm); - if (ret) - return ret; - - mutex_lock(&data->lock); - ret = regmap_bulk_write(data->regmap, ISL12057_REG_RTC_SC, regs, - ISL12057_RTC_SEC_LEN); - if (ret) { - dev_err(dev, "%s: unable to write RTC time section (%d)\n", - __func__, ret); - goto out; - } - - /* - * Now that RTC time has been updated, let's clear oscillator - * failure flag, if needed. - */ - ret = regmap_update_bits(data->regmap, ISL12057_REG_SR, - ISL12057_REG_SR_OSF, 0); - if (ret < 0) - dev_err(dev, "%s: unable to clear osc. failure bit (%d)\n", - __func__, ret); - -out: - mutex_unlock(&data->lock); - - return ret; -} - -/* - * Check current RTC status and enable/disable what needs to be. Return 0 if - * everything went ok and a negative value upon error. Note: this function - * is called early during init and hence does need mutex protection. - */ -static int isl12057_check_rtc_status(struct device *dev, struct regmap *regmap) -{ - int ret; - - /* Enable oscillator if not already running */ - ret = regmap_update_bits(regmap, ISL12057_REG_INT, - ISL12057_REG_INT_EOSC, 0); - if (ret < 0) { - dev_err(dev, "%s: unable to enable oscillator (%d)\n", - __func__, ret); - return ret; - } - - /* Clear alarm bit if needed */ - ret = regmap_update_bits(regmap, ISL12057_REG_SR, - ISL12057_REG_SR_A1F, 0); - if (ret < 0) { - dev_err(dev, "%s: unable to clear alarm bit (%d)\n", - __func__, ret); - return ret; - } - - return 0; -} - -#ifdef CONFIG_OF -/* - * One would expect the device to be marked as a wakeup source only - * when an IRQ pin of the RTC is routed to an interrupt line of the - * CPU. In practice, such an IRQ pin can be connected to a PMIC and - * this allows the device to be powered up when RTC alarm rings. This - * is for instance the case on ReadyNAS 102, 104 and 2120. On those - * devices with no IRQ driectly connected to the SoC, the RTC chip - * can be forced as a wakeup source by stating that explicitly in - * the device's .dts file using the "wakeup-source" boolean property. - * This will guarantee 'wakealarm' sysfs entry is available on the device. - * - * The function below returns 1, i.e. the capability of the chip to - * wakeup the device, based on IRQ availability or if the boolean - * property has been set in the .dts file. Otherwise, it returns 0. - */ - -static bool isl12057_can_wakeup_machine(struct device *dev) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - - return data->irq || of_property_read_bool(dev->of_node, "wakeup-source") - || of_property_read_bool(dev->of_node, /* legacy */ - "isil,irq2-can-wakeup-machine"); -} -#else -static bool isl12057_can_wakeup_machine(struct device *dev) -{ - struct isl12057_rtc_data *data = dev_get_drvdata(dev); - - return !!data->irq; -} -#endif - -static int isl12057_rtc_alarm_irq_enable(struct device *dev, - unsigned int enable) -{ - struct isl12057_rtc_data *rtc_data = dev_get_drvdata(dev); - int ret = -ENOTTY; - - if (rtc_data->irq) - ret = isl12057_rtc_update_alarm(dev, enable); - - return ret; -} - -static irqreturn_t isl12057_rtc_interrupt(int irq, void *data) -{ - struct i2c_client *client = data; - struct isl12057_rtc_data *rtc_data = dev_get_drvdata(&client->dev); - struct rtc_device *rtc = rtc_data->rtc; - int ret, handled = IRQ_NONE; - unsigned int sr; - - ret = regmap_read(rtc_data->regmap, ISL12057_REG_SR, &sr); - if (!ret && (sr & ISL12057_REG_SR_A1F)) { - dev_dbg(&client->dev, "RTC alarm!\n"); - - rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); - - /* Acknowledge and disable the alarm */ - _isl12057_rtc_clear_alarm(&client->dev); - _isl12057_rtc_update_alarm(&client->dev, 0); - - handled = IRQ_HANDLED; - } - - return handled; -} - -static const struct rtc_class_ops rtc_ops = { - .read_time = _isl12057_rtc_read_time, - .set_time = isl12057_rtc_set_time, - .read_alarm = isl12057_rtc_read_alarm, - .set_alarm = isl12057_rtc_set_alarm, - .alarm_irq_enable = isl12057_rtc_alarm_irq_enable, -}; - -static const struct regmap_config isl12057_rtc_regmap_config = { - .reg_bits = 8, - .val_bits = 8, -}; - -static int isl12057_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct device *dev = &client->dev; - struct isl12057_rtc_data *data; - struct regmap *regmap; - int ret; - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | - I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_I2C_BLOCK)) - return -ENODEV; - - regmap = devm_regmap_init_i2c(client, &isl12057_rtc_regmap_config); - if (IS_ERR(regmap)) { - ret = PTR_ERR(regmap); - dev_err(dev, "%s: regmap allocation failed (%d)\n", - __func__, ret); - return ret; - } - - ret = isl12057_i2c_validate_chip(regmap); - if (ret) - return ret; - - ret = isl12057_check_rtc_status(dev, regmap); - if (ret) - return ret; - - data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - mutex_init(&data->lock); - data->regmap = regmap; - dev_set_drvdata(dev, data); - - if (client->irq > 0) { - ret = devm_request_threaded_irq(dev, client->irq, NULL, - isl12057_rtc_interrupt, - IRQF_SHARED|IRQF_ONESHOT, - DRV_NAME, client); - if (!ret) - data->irq = client->irq; - else - dev_err(dev, "%s: irq %d unavailable (%d)\n", __func__, - client->irq, ret); - } - - if (isl12057_can_wakeup_machine(dev)) - device_init_wakeup(dev, true); - - data->rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops, - THIS_MODULE); - ret = PTR_ERR_OR_ZERO(data->rtc); - if (ret) { - dev_err(dev, "%s: unable to register RTC device (%d)\n", - __func__, ret); - goto err; - } - - /* We cannot support UIE mode if we do not have an IRQ line */ - if (!data->irq) - data->rtc->uie_unsupported = 1; - -err: - return ret; -} - -static int isl12057_remove(struct i2c_client *client) -{ - if (isl12057_can_wakeup_machine(&client->dev)) - device_init_wakeup(&client->dev, false); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int isl12057_rtc_suspend(struct device *dev) -{ - struct isl12057_rtc_data *rtc_data = dev_get_drvdata(dev); - - if (rtc_data->irq && device_may_wakeup(dev)) - return enable_irq_wake(rtc_data->irq); - - return 0; -} - -static int isl12057_rtc_resume(struct device *dev) -{ - struct isl12057_rtc_data *rtc_data = dev_get_drvdata(dev); - - if (rtc_data->irq && device_may_wakeup(dev)) - return disable_irq_wake(rtc_data->irq); - - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(isl12057_rtc_pm_ops, isl12057_rtc_suspend, - isl12057_rtc_resume); - -#ifdef CONFIG_OF -static const struct of_device_id isl12057_dt_match[] = { - { .compatible = "isl,isl12057" }, /* for backward compat., don't use */ - { .compatible = "isil,isl12057" }, - { }, -}; -MODULE_DEVICE_TABLE(of, isl12057_dt_match); -#endif - -static const struct i2c_device_id isl12057_id[] = { - { "isl12057", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, isl12057_id); - -static struct i2c_driver isl12057_driver = { - .driver = { - .name = DRV_NAME, - .pm = &isl12057_rtc_pm_ops, - .of_match_table = of_match_ptr(isl12057_dt_match), - }, - .probe = isl12057_probe, - .remove = isl12057_remove, - .id_table = isl12057_id, -}; -module_i2c_driver(isl12057_driver); - -MODULE_AUTHOR("Arnaud EBALARD <arno@natisbad.org>"); -MODULE_DESCRIPTION("Intersil ISL12057 RTC driver"); -MODULE_LICENSE("GPL"); |