diff options
Diffstat (limited to 'drivers/sbus/char/cpwatchdog.c')
| -rw-r--r-- | drivers/sbus/char/cpwatchdog.c | 858 |
1 files changed, 0 insertions, 858 deletions
diff --git a/drivers/sbus/char/cpwatchdog.c b/drivers/sbus/char/cpwatchdog.c deleted file mode 100644 index 23abfdfb44f1..000000000000 --- a/drivers/sbus/char/cpwatchdog.c +++ /dev/null @@ -1,858 +0,0 @@ -/* cpwatchdog.c - driver implementation for hardware watchdog - * timers found on Sun Microsystems CP1400 and CP1500 boards. - * - * This device supports both the generic Linux watchdog - * interface and Solaris-compatible ioctls as best it is - * able. - * - * NOTE: CP1400 systems appear to have a defective intr_mask - * register on the PLD, preventing the disabling of - * timer interrupts. We use a timer to periodically - * reset 'stopped' watchdogs on affected platforms. - * - * Copyright (c) 2000 Eric Brower (ebrower@usa.net) - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/errno.h> -#include <linux/major.h> -#include <linux/init.h> -#include <linux/miscdevice.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timer.h> -#include <linux/smp_lock.h> -#include <linux/io.h> -#include <asm/irq.h> -#include <asm/ebus.h> -#include <asm/oplib.h> -#include <asm/uaccess.h> - -#include <asm/watchdog.h> - -#define WD_OBPNAME "watchdog" -#define WD_BADMODEL "SUNW,501-5336" -#define WD_BTIMEOUT (jiffies + (HZ * 1000)) -#define WD_BLIMIT 0xFFFF - -#define WD0_DEVNAME "watchdog0" -#define WD1_DEVNAME "watchdog1" -#define WD2_DEVNAME "watchdog2" - -#define WD0_MINOR 212 -#define WD1_MINOR 213 -#define WD2_MINOR 214 - - -/* Internal driver definitions - */ -#define WD0_ID 0 /* Watchdog0 */ -#define WD1_ID 1 /* Watchdog1 */ -#define WD2_ID 2 /* Watchdog2 */ -#define WD_NUMDEVS 3 /* Device contains 3 timers */ - -#define WD_INTR_OFF 0 /* Interrupt disable value */ -#define WD_INTR_ON 1 /* Interrupt enable value */ - -#define WD_STAT_INIT 0x01 /* Watchdog timer is initialized */ -#define WD_STAT_BSTOP 0x02 /* Watchdog timer is brokenstopped */ -#define WD_STAT_SVCD 0x04 /* Watchdog interrupt occurred */ - -/* Register value definitions - */ -#define WD0_INTR_MASK 0x01 /* Watchdog device interrupt masks */ -#define WD1_INTR_MASK 0x02 -#define WD2_INTR_MASK 0x04 - -#define WD_S_RUNNING 0x01 /* Watchdog device status running */ -#define WD_S_EXPIRED 0x02 /* Watchdog device status expired */ - -/* Sun uses Altera PLD EPF8820ATC144-4 - * providing three hardware watchdogs: - * - * 1) RIC - sends an interrupt when triggered - * 2) XIR - asserts XIR_B_RESET when triggered, resets CPU - * 3) POR - asserts POR_B_RESET when triggered, resets CPU, backplane, board - * - *** Timer register block definition (struct wd_timer_regblk) - * - * dcntr and limit registers (halfword access): - * ------------------- - * | 15 | ...| 1 | 0 | - * ------------------- - * |- counter val -| - * ------------------- - * dcntr - Current 16-bit downcounter value. - * When downcounter reaches '0' watchdog expires. - * Reading this register resets downcounter with 'limit' value. - * limit - 16-bit countdown value in 1/10th second increments. - * Writing this register begins countdown with input value. - * Reading from this register does not affect counter. - * NOTES: After watchdog reset, dcntr and limit contain '1' - * - * status register (byte access): - * --------------------------- - * | 7 | ... | 2 | 1 | 0 | - * --------------+------------ - * |- UNUSED -| EXP | RUN | - * --------------------------- - * status- Bit 0 - Watchdog is running - * Bit 1 - Watchdog has expired - * - *** PLD register block definition (struct wd_pld_regblk) - * - * intr_mask register (byte access): - * --------------------------------- - * | 7 | ... | 3 | 2 | 1 | 0 | - * +-------------+------------------ - * |- UNUSED -| WD3 | WD2 | WD1 | - * --------------------------------- - * WD3 - 1 == Interrupt disabled for watchdog 3 - * WD2 - 1 == Interrupt disabled for watchdog 2 - * WD1 - 1 == Interrupt disabled for watchdog 1 - * - * pld_status register (byte access): - * UNKNOWN, MAGICAL MYSTERY REGISTER - * - */ -#define WD_TIMER_REGSZ 16 -#define WD0_OFF 0 -#define WD1_OFF (WD_TIMER_REGSZ * 1) -#define WD2_OFF (WD_TIMER_REGSZ * 2) -#define PLD_OFF (WD_TIMER_REGSZ * 3) - -#define WD_DCNTR 0x00 -#define WD_LIMIT 0x04 -#define WD_STATUS 0x08 - -#define PLD_IMASK (PLD_OFF + 0x00) -#define PLD_STATUS (PLD_OFF + 0x04) - -/* Individual timer structure - */ -struct wd_timer { - __u16 timeout; - __u8 intr_mask; - unsigned char runstatus; - void __iomem *regs; -}; - -/* Device structure - */ -struct wd_device { - int irq; - spinlock_t lock; - unsigned char isbaddoggie; /* defective PLD */ - unsigned char opt_enable; - unsigned char opt_reboot; - unsigned short opt_timeout; - unsigned char initialized; - struct wd_timer watchdog[WD_NUMDEVS]; - void __iomem *regs; -}; - -static struct wd_device wd_dev = { - 0, __SPIN_LOCK_UNLOCKED(wd_dev.lock), 0, 0, 0, 0, -}; - -static struct timer_list wd_timer; - -static int wd0_timeout = 0; -static int wd1_timeout = 0; -static int wd2_timeout = 0; - -#ifdef MODULE -module_param (wd0_timeout, int, 0); -MODULE_PARM_DESC(wd0_timeout, "Default watchdog0 timeout in 1/10secs"); -module_param (wd1_timeout, int, 0); -MODULE_PARM_DESC(wd1_timeout, "Default watchdog1 timeout in 1/10secs"); -module_param (wd2_timeout, int, 0); -MODULE_PARM_DESC(wd2_timeout, "Default watchdog2 timeout in 1/10secs"); - -MODULE_AUTHOR - ("Eric Brower <ebrower@usa.net>"); -MODULE_DESCRIPTION - ("Hardware watchdog driver for Sun Microsystems CP1400/1500"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE - ("watchdog"); -#endif /* ifdef MODULE */ - -/* Forward declarations of internal methods - */ -#ifdef WD_DEBUG -static void wd_dumpregs(void); -#endif -static irqreturn_t wd_interrupt(int irq, void *dev_id); -static void wd_toggleintr(struct wd_timer* pTimer, int enable); -static void wd_pingtimer(struct wd_timer* pTimer); -static void wd_starttimer(struct wd_timer* pTimer); -static void wd_resetbrokentimer(struct wd_timer* pTimer); -static void wd_stoptimer(struct wd_timer* pTimer); -static void wd_brokentimer(unsigned long data); -static int wd_getstatus(struct wd_timer* pTimer); - -/* PLD expects words to be written in LSB format, - * so we must flip all words prior to writing them to regs - */ -static inline unsigned short flip_word(unsigned short word) -{ - return ((word & 0xff) << 8) | ((word >> 8) & 0xff); -} - -#define wd_writew(val, addr) (writew(flip_word(val), addr)) -#define wd_readw(addr) (flip_word(readw(addr))) -#define wd_writeb(val, addr) (writeb(val, addr)) -#define wd_readb(addr) (readb(addr)) - - -/* CP1400s seem to have broken PLD implementations-- - * the interrupt_mask register cannot be written, so - * no timer interrupts can be masked within the PLD. - */ -static inline int wd_isbroken(void) -{ - /* we could test this by read/write/read/restore - * on the interrupt mask register only if OBP - * 'watchdog-enable?' == FALSE, but it seems - * ubiquitous on CP1400s - */ - char val[32]; - prom_getproperty(prom_root_node, "model", val, sizeof(val)); - return((!strcmp(val, WD_BADMODEL)) ? 1 : 0); -} - -/* Retrieve watchdog-enable? option from OBP - * Returns 0 if false, 1 if true - */ -static inline int wd_opt_enable(void) -{ - int opt_node; - - opt_node = prom_getchild(prom_root_node); - opt_node = prom_searchsiblings(opt_node, "options"); - return((-1 == prom_getint(opt_node, "watchdog-enable?")) ? 0 : 1); -} - -/* Retrieve watchdog-reboot? option from OBP - * Returns 0 if false, 1 if true - */ -static inline int wd_opt_reboot(void) -{ - int opt_node; - - opt_node = prom_getchild(prom_root_node); - opt_node = prom_searchsiblings(opt_node, "options"); - return((-1 == prom_getint(opt_node, "watchdog-reboot?")) ? 0 : 1); -} - -/* Retrieve watchdog-timeout option from OBP - * Returns OBP value, or 0 if not located - */ -static inline int wd_opt_timeout(void) -{ - int opt_node; - char value[32]; - char *p = value; - - opt_node = prom_getchild(prom_root_node); - opt_node = prom_searchsiblings(opt_node, "options"); - opt_node = prom_getproperty(opt_node, - "watchdog-timeout", - value, - sizeof(value)); - if(-1 != opt_node) { - /* atoi implementation */ - for(opt_node = 0; /* nop */; p++) { - if(*p >= '0' && *p <= '9') { - opt_node = (10*opt_node)+(*p-'0'); - } - else { - break; - } - } - } - return((-1 == opt_node) ? (0) : (opt_node)); -} - -static int wd_open(struct inode *inode, struct file *f) -{ - lock_kernel(); - switch(iminor(inode)) - { - case WD0_MINOR: - f->private_data = &wd_dev.watchdog[WD0_ID]; - break; - case WD1_MINOR: - f->private_data = &wd_dev.watchdog[WD1_ID]; - break; - case WD2_MINOR: - f->private_data = &wd_dev.watchdog[WD2_ID]; - break; - default: - unlock_kernel(); - return(-ENODEV); - } - - /* Register IRQ on first open of device */ - if(0 == wd_dev.initialized) - { - if (request_irq(wd_dev.irq, - &wd_interrupt, - IRQF_SHARED, - WD_OBPNAME, - (void *)wd_dev.regs)) { - printk("%s: Cannot register IRQ %d\n", - WD_OBPNAME, wd_dev.irq); - unlock_kernel(); - return(-EBUSY); - } - wd_dev.initialized = 1; - } - - unlock_kernel(); - return(nonseekable_open(inode, f)); -} - -static int wd_release(struct inode *inode, struct file *file) -{ - return 0; -} - -static int wd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - int setopt = 0; - struct wd_timer* pTimer = (struct wd_timer*)file->private_data; - void __user *argp = (void __user *)arg; - struct watchdog_info info = { - 0, - 0, - "Altera EPF8820ATC144-4" - }; - - if(NULL == pTimer) { - return(-EINVAL); - } - - switch(cmd) - { - /* Generic Linux IOCTLs */ - case WDIOC_GETSUPPORT: - if(copy_to_user(argp, &info, sizeof(struct watchdog_info))) { - return(-EFAULT); - } - break; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - if (put_user(0, (int __user *)argp)) - return -EFAULT; - break; - case WDIOC_KEEPALIVE: - wd_pingtimer(pTimer); - break; - case WDIOC_SETOPTIONS: - if(copy_from_user(&setopt, argp, sizeof(unsigned int))) { - return -EFAULT; - } - if(setopt & WDIOS_DISABLECARD) { - if(wd_dev.opt_enable) { - printk( - "%s: cannot disable watchdog in ENABLED mode\n", - WD_OBPNAME); - return(-EINVAL); - } - wd_stoptimer(pTimer); - } - else if(setopt & WDIOS_ENABLECARD) { - wd_starttimer(pTimer); - } - else { - return(-EINVAL); - } - break; - /* Solaris-compatible IOCTLs */ - case WIOCGSTAT: - setopt = wd_getstatus(pTimer); - if(copy_to_user(argp, &setopt, sizeof(unsigned int))) { - return(-EFAULT); - } - break; - case WIOCSTART: - wd_starttimer(pTimer); - break; - case WIOCSTOP: - if(wd_dev.opt_enable) { - printk("%s: cannot disable watchdog in ENABLED mode\n", - WD_OBPNAME); - return(-EINVAL); - } - wd_stoptimer(pTimer); - break; - default: - return(-EINVAL); - } - return(0); -} - -static long wd_compat_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - int rval = -ENOIOCTLCMD; - - switch (cmd) { - /* solaris ioctls are specific to this driver */ - case WIOCSTART: - case WIOCSTOP: - case WIOCGSTAT: - lock_kernel(); - rval = wd_ioctl(file->f_path.dentry->d_inode, file, cmd, arg); - unlock_kernel(); - break; - /* everything else is handled by the generic compat layer */ - default: - break; - } - - return rval; -} - -static ssize_t wd_write(struct file *file, - const char __user *buf, - size_t count, - loff_t *ppos) -{ - struct wd_timer* pTimer = (struct wd_timer*)file->private_data; - - if(NULL == pTimer) { - return(-EINVAL); - } - - if (count) { - wd_pingtimer(pTimer); - return 1; - } - return 0; -} - -static ssize_t wd_read(struct file * file, char __user *buffer, - size_t count, loff_t *ppos) -{ -#ifdef WD_DEBUG - wd_dumpregs(); - return(0); -#else - return(-EINVAL); -#endif /* ifdef WD_DEBUG */ -} - -static irqreturn_t wd_interrupt(int irq, void *dev_id) -{ - /* Only WD0 will interrupt-- others are NMI and we won't - * see them here.... - */ - spin_lock_irq(&wd_dev.lock); - if((unsigned long)wd_dev.regs == (unsigned long)dev_id) - { - wd_stoptimer(&wd_dev.watchdog[WD0_ID]); - wd_dev.watchdog[WD0_ID].runstatus |= WD_STAT_SVCD; - } - spin_unlock_irq(&wd_dev.lock); - return IRQ_HANDLED; -} - -static const struct file_operations wd_fops = { - .owner = THIS_MODULE, - .ioctl = wd_ioctl, - .compat_ioctl = wd_compat_ioctl, - .open = wd_open, - .write = wd_write, - .read = wd_read, - .release = wd_release, -}; - -static struct miscdevice wd0_miscdev = { WD0_MINOR, WD0_DEVNAME, &wd_fops }; -static struct miscdevice wd1_miscdev = { WD1_MINOR, WD1_DEVNAME, &wd_fops }; -static struct miscdevice wd2_miscdev = { WD2_MINOR, WD2_DEVNAME, &wd_fops }; - -#ifdef WD_DEBUG -static void wd_dumpregs(void) -{ - /* Reading from downcounters initiates watchdog countdown-- - * Example is included below for illustration purposes. - */ - int i; - printk("%s: dumping register values\n", WD_OBPNAME); - for(i = WD0_ID; i < WD_NUMDEVS; ++i) { - /* printk("\t%s%i: dcntr at 0x%lx: 0x%x\n", - * WD_OBPNAME, - * i, - * (unsigned long)(&wd_dev.watchdog[i].regs->dcntr), - * readw(&wd_dev.watchdog[i].regs->dcntr)); - */ - printk("\t%s%i: limit at 0x%lx: 0x%x\n", - WD_OBPNAME, - i, - (unsigned long)(&wd_dev.watchdog[i].regs->limit), - readw(&wd_dev.watchdog[i].regs->limit)); - printk("\t%s%i: status at 0x%lx: 0x%x\n", - WD_OBPNAME, - i, - (unsigned long)(&wd_dev.watchdog[i].regs->status), - readb(&wd_dev.watchdog[i].regs->status)); - printk("\t%s%i: driver status: 0x%x\n", - WD_OBPNAME, - i, - wd_getstatus(&wd_dev.watchdog[i])); - } - printk("\tintr_mask at %p: 0x%x\n", - wd_dev.regs + PLD_IMASK, - readb(wd_dev.regs + PLD_IMASK)); - printk("\tpld_status at %p: 0x%x\n", - wd_dev.regs + PLD_STATUS, - readb(wd_dev.regs + PLD_STATUS)); -} -#endif - -/* Enable or disable watchdog interrupts - * Because of the CP1400 defect this should only be - * called during initialzation or by wd_[start|stop]timer() - * - * pTimer - pointer to timer device, or NULL to indicate all timers - * enable - non-zero to enable interrupts, zero to disable - */ -static void wd_toggleintr(struct wd_timer* pTimer, int enable) -{ - unsigned char curregs = wd_readb(wd_dev.regs + PLD_IMASK); - unsigned char setregs = - (NULL == pTimer) ? - (WD0_INTR_MASK | WD1_INTR_MASK | WD2_INTR_MASK) : - (pTimer->intr_mask); - - (WD_INTR_ON == enable) ? - (curregs &= ~setregs): - (curregs |= setregs); - - wd_writeb(curregs, wd_dev.regs + PLD_IMASK); - return; -} - -/* Reset countdown timer with 'limit' value and continue countdown. - * This will not start a stopped timer. - * - * pTimer - pointer to timer device - */ -static void wd_pingtimer(struct wd_timer* pTimer) -{ - if (wd_readb(pTimer->regs + WD_STATUS) & WD_S_RUNNING) { - wd_readw(pTimer->regs + WD_DCNTR); - } -} - -/* Stop a running watchdog timer-- the timer actually keeps - * running, but the interrupt is masked so that no action is - * taken upon expiration. - * - * pTimer - pointer to timer device - */ -static void wd_stoptimer(struct wd_timer* pTimer) -{ - if(wd_readb(pTimer->regs + WD_STATUS) & WD_S_RUNNING) { - wd_toggleintr(pTimer, WD_INTR_OFF); - - if(wd_dev.isbaddoggie) { - pTimer->runstatus |= WD_STAT_BSTOP; - wd_brokentimer((unsigned long)&wd_dev); - } - } -} - -/* Start a watchdog timer with the specified limit value - * If the watchdog is running, it will be restarted with - * the provided limit value. - * - * This function will enable interrupts on the specified - * watchdog. - * - * pTimer - pointer to timer device - * limit - limit (countdown) value in 1/10th seconds - */ -static void wd_starttimer(struct wd_timer* pTimer) -{ - if(wd_dev.isbaddoggie) { - pTimer->runstatus &= ~WD_STAT_BSTOP; - } - pTimer->runstatus &= ~WD_STAT_SVCD; - - wd_writew(pTimer->timeout, pTimer->regs + WD_LIMIT); - wd_toggleintr(pTimer, WD_INTR_ON); -} - -/* Restarts timer with maximum limit value and - * does not unset 'brokenstop' value. - */ -static void wd_resetbrokentimer(struct wd_timer* pTimer) -{ - wd_toggleintr(pTimer, WD_INTR_ON); - wd_writew(WD_BLIMIT, pTimer->regs + WD_LIMIT); -} - -/* Timer device initialization helper. - * Returns 0 on success, other on failure - */ -static int wd_inittimer(int whichdog) -{ - struct miscdevice *whichmisc; - void __iomem *whichregs; - char whichident[8]; - int whichmask; - __u16 whichlimit; - - switch(whichdog) - { - case WD0_ID: - whichmisc = &wd0_miscdev; - strcpy(whichident, "RIC"); - whichregs = wd_dev.regs + WD0_OFF; - whichmask = WD0_INTR_MASK; - whichlimit= (0 == wd0_timeout) ? - (wd_dev.opt_timeout): - (wd0_timeout); - break; - case WD1_ID: - whichmisc = &wd1_miscdev; - strcpy(whichident, "XIR"); - whichregs = wd_dev.regs + WD1_OFF; - whichmask = WD1_INTR_MASK; - whichlimit= (0 == wd1_timeout) ? - (wd_dev.opt_timeout): - (wd1_timeout); - break; - case WD2_ID: - whichmisc = &wd2_miscdev; - strcpy(whichident, "POR"); - whichregs = wd_dev.regs + WD2_OFF; - whichmask = WD2_INTR_MASK; - whichlimit= (0 == wd2_timeout) ? - (wd_dev.opt_timeout): - (wd2_timeout); - break; - default: - printk("%s: %s: invalid watchdog id: %i\n", - WD_OBPNAME, __func__, whichdog); - return(1); - } - if(0 != misc_register(whichmisc)) - { - return(1); - } - wd_dev.watchdog[whichdog].regs = whichregs; - wd_dev.watchdog[whichdog].timeout = whichlimit; - wd_dev.watchdog[whichdog].intr_mask = whichmask; - wd_dev.watchdog[whichdog].runstatus &= ~WD_STAT_BSTOP; - wd_dev.watchdog[whichdog].runstatus |= WD_STAT_INIT; - - printk("%s%i: %s hardware watchdog [%01i.%i sec] %s\n", - WD_OBPNAME, - whichdog, - whichident, - wd_dev.watchdog[whichdog].timeout / 10, - wd_dev.watchdog[whichdog].timeout % 10, - (0 != wd_dev.opt_enable) ? "in ENABLED mode" : ""); - return(0); -} - -/* Timer method called to reset stopped watchdogs-- - * because of the PLD bug on CP1400, we cannot mask - * interrupts within the PLD so me must continually - * reset the timers ad infinitum. - */ -static void wd_brokentimer(unsigned long data) -{ - struct wd_device* pDev = (struct wd_device*)data; - int id, tripped = 0; - - /* kill a running timer instance, in case we - * were called directly instead of by kernel timer - */ - if(timer_pending(&wd_timer)) { - del_timer(&wd_timer); - } - - for(id = WD0_ID; id < WD_NUMDEVS; ++id) { - if(pDev->watchdog[id].runstatus & WD_STAT_BSTOP) { - ++tripped; - wd_resetbrokentimer(&pDev->watchdog[id]); - } - } - - if(tripped) { - /* there is at least one timer brokenstopped-- reschedule */ - init_timer(&wd_timer); - wd_timer.expires = WD_BTIMEOUT; - add_timer(&wd_timer); - } -} - -static int wd_getstatus(struct wd_timer* pTimer) -{ - unsigned char stat = wd_readb(pTimer->regs + WD_STATUS); - unsigned char intr = wd_readb(wd_dev.regs + PLD_IMASK); - unsigned char ret = WD_STOPPED; - - /* determine STOPPED */ - if(0 == stat ) { - return(ret); - } - /* determine EXPIRED vs FREERUN vs RUNNING */ - else if(WD_S_EXPIRED & stat) { - ret = WD_EXPIRED; - } - else if(WD_S_RUNNING & stat) { - if(intr & pTimer->intr_mask) { - ret = WD_FREERUN; - } - else { - /* Fudge WD_EXPIRED status for defective CP1400-- - * IF timer is running - * AND brokenstop is set - * AND an interrupt has been serviced - * we are WD_EXPIRED. - * - * IF timer is running - * AND brokenstop is set - * AND no interrupt has been serviced - * we are WD_FREERUN. - */ - if(wd_dev.isbaddoggie && (pTimer->runstatus & WD_STAT_BSTOP)) { - if(pTimer->runstatus & WD_STAT_SVCD) { - ret = WD_EXPIRED; - } - else { - /* we could as well pretend we are expired */ - ret = WD_FREERUN; - } - } - else { - ret = WD_RUNNING; - } - } - } - - /* determine SERVICED */ - if(pTimer->runstatus & WD_STAT_SVCD) { - ret |= WD_SERVICED; - } - - return(ret); -} - -static int __init wd_init(void) -{ - int id; - struct linux_ebus *ebus = NULL; - struct linux_ebus_device *edev = NULL; - - for_each_ebus(ebus) { - for_each_ebusdev(edev, ebus) { - if (!strcmp(edev->ofdev.node->name, WD_OBPNAME)) - goto ebus_done; - } - } - -ebus_done: - if(!edev) { - printk("%s: unable to locate device\n", WD_OBPNAME); - return -ENODEV; - } - - wd_dev.regs = - ioremap(edev->resource[0].start, 4 * WD_TIMER_REGSZ); /* ? */ - - if(NULL == wd_dev.regs) { - printk("%s: unable to map registers\n", WD_OBPNAME); - return(-ENODEV); - } - - /* initialize device structure from OBP parameters */ - wd_dev.irq = edev->irqs[0]; - wd_dev.opt_enable = wd_opt_enable(); - wd_dev.opt_reboot = wd_opt_reboot(); - wd_dev.opt_timeout = wd_opt_timeout(); - wd_dev.isbaddoggie = wd_isbroken(); - - /* disable all interrupts unless watchdog-enabled? == true */ - if(! wd_dev.opt_enable) { - wd_toggleintr(NULL, WD_INTR_OFF); - } - - /* register miscellaneous devices */ - for(id = WD0_ID; id < WD_NUMDEVS; ++id) { - if(0 != wd_inittimer(id)) { - printk("%s%i: unable to initialize\n", WD_OBPNAME, id); - } - } - - /* warn about possible defective PLD */ - if(wd_dev.isbaddoggie) { - init_timer(&wd_timer); - wd_timer.function = wd_brokentimer; - wd_timer.data = (unsigned long)&wd_dev; - wd_timer.expires = WD_BTIMEOUT; - - printk("%s: PLD defect workaround enabled for model %s\n", - WD_OBPNAME, WD_BADMODEL); - } - return(0); -} - -static void __exit wd_cleanup(void) -{ - int id; - - /* if 'watchdog-enable?' == TRUE, timers are not stopped - * when module is unloaded. All brokenstopped timers will - * also now eventually trip. - */ - for(id = WD0_ID; id < WD_NUMDEVS; ++id) { - if(WD_S_RUNNING == wd_readb(wd_dev.watchdog[id].regs + WD_STATUS)) { - if(wd_dev.opt_enable) { - printk(KERN_WARNING "%s%i: timer not stopped at release\n", - WD_OBPNAME, id); - } - else { - wd_stoptimer(&wd_dev.watchdog[id]); - if(wd_dev.watchdog[id].runstatus & WD_STAT_BSTOP) { - wd_resetbrokentimer(&wd_dev.watchdog[id]); - printk(KERN_WARNING - "%s%i: defect workaround disabled at release, "\ - "timer expires in ~%01i sec\n", - WD_OBPNAME, id, - wd_readw(wd_dev.watchdog[id].regs + WD_LIMIT) / 10); - } - } - } - } - - if(wd_dev.isbaddoggie && timer_pending(&wd_timer)) { - del_timer(&wd_timer); - } - if(0 != (wd_dev.watchdog[WD0_ID].runstatus & WD_STAT_INIT)) { - misc_deregister(&wd0_miscdev); - } - if(0 != (wd_dev.watchdog[WD1_ID].runstatus & WD_STAT_INIT)) { - misc_deregister(&wd1_miscdev); - } - if(0 != (wd_dev.watchdog[WD2_ID].runstatus & WD_STAT_INIT)) { - misc_deregister(&wd2_miscdev); - } - if(0 != wd_dev.initialized) { - free_irq(wd_dev.irq, (void *)wd_dev.regs); - } - iounmap(wd_dev.regs); -} - -module_init(wd_init); -module_exit(wd_cleanup); |