summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aacraid/aachba.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aacraid/aachba.c')
-rw-r--r--drivers/scsi/aacraid/aachba.c133
1 files changed, 125 insertions, 8 deletions
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 460d4024c46c..aa4e77c25273 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -498,6 +498,11 @@ static void _aac_probe_container2(void * context, struct fib * fibptr)
(le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
(le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
fsa_dev_ptr->valid = 1;
+ /* sense_key holds the current state of the spin-up */
+ if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
+ fsa_dev_ptr->sense_data.sense_key = NOT_READY;
+ else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
+ fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
fsa_dev_ptr->size
= ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
@@ -1509,20 +1514,35 @@ static void io_callback(void *context, struct fib * fibptr)
scsi_dma_unmap(scsicmd);
readreply = (struct aac_read_reply *)fib_data(fibptr);
- if (le32_to_cpu(readreply->status) == ST_OK)
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
- else {
+ switch (le32_to_cpu(readreply->status)) {
+ case ST_OK:
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_GOOD;
+ dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
+ break;
+ case ST_NOT_READY:
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
+ set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
+ SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
+ memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+ min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
+ SCSI_SENSE_BUFFERSIZE));
+ break;
+ default:
#ifdef AAC_DETAILED_STATUS_INFO
printk(KERN_WARNING "io_callback: io failed, status = %d\n",
le32_to_cpu(readreply->status));
#endif
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
set_sense(&dev->fsa_dev[cid].sense_data,
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
SCSI_SENSE_BUFFERSIZE));
+ break;
}
aac_fib_complete(fibptr);
aac_fib_free(fibptr);
@@ -1863,6 +1883,84 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd)
return SCSI_MLQUEUE_HOST_BUSY;
}
+static void aac_start_stop_callback(void *context, struct fib *fibptr)
+{
+ struct scsi_cmnd *scsicmd = context;
+
+ if (!aac_valid_context(scsicmd, fibptr))
+ return;
+
+ BUG_ON(fibptr == NULL);
+
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ scsicmd->scsi_done(scsicmd);
+}
+
+static int aac_start_stop(struct scsi_cmnd *scsicmd)
+{
+ int status;
+ struct fib *cmd_fibcontext;
+ struct aac_power_management *pmcmd;
+ struct scsi_device *sdev = scsicmd->device;
+ struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+
+ if (!(aac->supplement_adapter_info.SupportedOptions2 &
+ AAC_OPTION_POWER_MANAGEMENT)) {
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+
+ if (aac->in_reset)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Allocate and initialize a Fib
+ */
+ cmd_fibcontext = aac_fib_alloc(aac);
+ if (!cmd_fibcontext)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ aac_fib_init(cmd_fibcontext);
+
+ pmcmd = fib_data(cmd_fibcontext);
+ pmcmd->command = cpu_to_le32(VM_ContainerConfig);
+ pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
+ /* Eject bit ignored, not relevant */
+ pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
+ cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
+ pmcmd->cid = cpu_to_le32(sdev_id(sdev));
+ pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
+ cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
+
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = aac_fib_send(ContainerCommand,
+ cmd_fibcontext,
+ sizeof(struct aac_power_management),
+ FsaNormal,
+ 0, 1,
+ (fib_callback)aac_start_stop_callback,
+ (void *)scsicmd);
+
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS) {
+ scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+ return 0;
+ }
+
+ aac_fib_complete(cmd_fibcontext);
+ aac_fib_free(cmd_fibcontext);
+ return SCSI_MLQUEUE_HOST_BUSY;
+}
+
/**
* aac_scsi_cmd() - Process SCSI command
* @scsicmd: SCSI command block
@@ -1899,7 +1997,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
* If the target container doesn't exist, it may have
* been newly created
*/
- if ((fsa_dev_ptr[cid].valid & 1) == 0) {
+ if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
+ (fsa_dev_ptr[cid].sense_data.sense_key ==
+ NOT_READY)) {
switch (scsicmd->cmnd[0]) {
case SERVICE_ACTION_IN:
if (!(dev->raw_io_interface) ||
@@ -2091,8 +2191,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
/* Do not cache partition table for arrays */
scsicmd->device->removable = 1;
-
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_GOOD;
scsicmd->scsi_done(scsicmd);
return 0;
@@ -2187,15 +2287,32 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
* These commands are all No-Ops
*/
case TEST_UNIT_READY:
+ if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
+ set_sense(&dev->fsa_dev[cid].sense_data,
+ NOT_READY, SENCODE_BECOMING_READY,
+ ASENCODE_BECOMING_READY, 0, 0);
+ memcpy(scsicmd->sense_buffer,
+ &dev->fsa_dev[cid].sense_data,
+ min_t(size_t,
+ sizeof(dev->fsa_dev[cid].sense_data),
+ SCSI_SENSE_BUFFERSIZE));
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+ /* FALLTHRU */
case RESERVE:
case RELEASE:
case REZERO_UNIT:
case REASSIGN_BLOCKS:
case SEEK_10:
- case START_STOP:
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
scsicmd->scsi_done(scsicmd);
return 0;
+
+ case START_STOP:
+ return aac_start_stop(scsicmd);
}
switch (scsicmd->cmnd[0])
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 15:43:58 +0100