diff options
Diffstat (limited to 'drivers/scsi/lpfc')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 23 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_crtn.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_els.c | 18 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_hbadisc.c | 1 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 52 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 184 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli4.h | 2 |
7 files changed, 156 insertions, 126 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 7bf492e156d9..f6697cb0e216 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2777,6 +2777,14 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr, if (val >= 0 && val <= 6) { prev_val = phba->cfg_topology; phba->cfg_topology = val; + if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G && + val == 4) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "3113 Loop mode not supported at speed %d\n", + phba->cfg_link_speed); + phba->cfg_topology = prev_val; + return -EINVAL; + } if (nolip) return strlen(buf); @@ -3222,6 +3230,14 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, val); return -EINVAL; } + if (val == LPFC_USER_LINK_SPEED_16G && + phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3112 lpfc_link_speed attribute cannot be set " + "to %d. Speed is not supported in loop mode.\n", + val); + return -EINVAL; + } if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) && (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) { prev_val = phba->cfg_link_speed; @@ -3266,6 +3282,13 @@ lpfc_param_show(link_speed) static int lpfc_link_speed_init(struct lpfc_hba *phba, int val) { + if (val == LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3111 lpfc_link_speed of %d cannot " + "support loop mode, setting topology to default.\n", + val); + phba->cfg_topology = 0; + } if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) && (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) { phba->cfg_link_speed = val; diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index f74afa23e0dd..9237ff154234 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -453,3 +453,5 @@ int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int); uint16_t lpfc_sli_sriov_nr_virtfn_get(struct lpfc_hba *); int lpfc_sli4_queue_create(struct lpfc_hba *); void lpfc_sli4_queue_destroy(struct lpfc_hba *); +int lpfc_sli4_read_config(struct lpfc_hba *phba); +int lpfc_scsi_buf_update(struct lpfc_hba *phba); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 445826a4c981..846ebfd37b5e 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -909,15 +909,15 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, */ if (phba->alpa_map[0] == 0) { vport->cfg_discovery_threads = LPFC_MAX_DISC_THREADS; - if ((phba->sli_rev == LPFC_SLI_REV4) && - (!(vport->fc_flag & FC_VFI_REGISTERED) || - (vport->fc_prevDID != vport->fc_myDID))) { - if (vport->fc_flag & FC_VFI_REGISTERED) - lpfc_sli4_unreg_all_rpis(vport); - lpfc_issue_reg_vfi(vport); - lpfc_nlp_put(ndlp); - goto out; - } + } + if ((phba->sli_rev == LPFC_SLI_REV4) && + (!(vport->fc_flag & FC_VFI_REGISTERED) || + (vport->fc_prevDID != vport->fc_myDID))) { + if (vport->fc_flag & FC_VFI_REGISTERED) + lpfc_sli4_unreg_all_rpis(vport); + lpfc_issue_reg_vfi(vport); + lpfc_nlp_put(ndlp); + goto out; } goto flogifail; } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 091f68e5cb70..cf4408f9a2cb 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2858,7 +2858,6 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) if (vport->port_state == LPFC_FABRIC_CFG_LINK) { /* For private loop just start discovery and we are done. */ if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) && - (phba->alpa_map[0] == 0) && !(vport->fc_flag & FC_PUBLIC_LOOP)) { /* Use loop map to make discovery list */ lpfc_disc_list_loopmap(vport); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d247eb015526..6096c9a091d1 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -62,7 +62,6 @@ static int lpfc_post_rcv_buf(struct lpfc_hba *); static int lpfc_sli4_queue_verify(struct lpfc_hba *); static int lpfc_create_bootstrap_mbox(struct lpfc_hba *); static int lpfc_setup_endian_order(struct lpfc_hba *); -static int lpfc_sli4_read_config(struct lpfc_hba *); static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *); static void lpfc_free_sgl_list(struct lpfc_hba *); static int lpfc_init_sgl_list(struct lpfc_hba *); @@ -2655,6 +2654,32 @@ lpfc_offline(struct lpfc_hba *phba) } /** + * lpfc_scsi_buf_update - Update the scsi_buffers that are already allocated. + * @phba: pointer to lpfc hba data structure. + * + * This routine goes through all the scsi buffers in the system and updates the + * Physical XRIs assigned to the SCSI buffer because these may change after any + * firmware reset + * + * Return codes + * 0 - successful (for now, it always returns 0) + **/ +int +lpfc_scsi_buf_update(struct lpfc_hba *phba) +{ + struct lpfc_scsi_buf *sb, *sb_next; + + spin_lock_irq(&phba->hbalock); + spin_lock(&phba->scsi_buf_list_lock); + list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) + sb->cur_iocbq.sli4_xritag = + phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag]; + spin_unlock(&phba->scsi_buf_list_lock); + spin_unlock_irq(&phba->hbalock); + return 0; +} + +/** * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists * @phba: pointer to lpfc hba data structure. * @@ -5021,15 +5046,8 @@ lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba) struct lpfc_rpi_hdr *rpi_hdr; INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list); - /* - * If the SLI4 port supports extents, posting the rpi header isn't - * required. Set the expected maximum count and let the actual value - * get set when extents are fully allocated. - */ - if (!phba->sli4_hba.rpi_hdrs_in_use) { - phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi; + if (!phba->sli4_hba.rpi_hdrs_in_use) return rc; - } if (phba->sli4_hba.extents_in_use) return -EIO; @@ -5923,7 +5941,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ -static int +int lpfc_sli4_read_config(struct lpfc_hba *phba) { LPFC_MBOXQ_t *pmb; @@ -5955,6 +5973,20 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) rc = -EIO; } else { rd_config = &pmb->u.mqe.un.rd_config; + if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) { + phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL; + phba->sli4_hba.lnk_info.lnk_tp = + bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config); + phba->sli4_hba.lnk_info.lnk_no = + bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "3081 lnk_type:%d, lnk_numb:%d\n", + phba->sli4_hba.lnk_info.lnk_tp, + phba->sli4_hba.lnk_info.lnk_no); + } else + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + "3082 Mailbox (x%x) returned ldv:x0\n", + bf_get(lpfc_mqe_command, &pmb->u.mqe)); phba->sli4_hba.extents_in_use = bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config); phba->sli4_hba.max_cfg_param.max_xri = diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 1be13e757eda..4c4d77356bb2 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -97,7 +97,7 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe) if (((q->host_index + 1) % q->entry_count) == q->hba_index) return -ENOMEM; /* set consumption flag every once in a while */ - if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL)) + if (!((q->host_index + 1) % q->entry_repost)) bf_set(wqe_wqec, &wqe->generic.wqe_com, 1); if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED) bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id); @@ -4551,9 +4551,9 @@ lpfc_sli_hba_setup_error: * data structure. **/ static int -lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba, - LPFC_MBOXQ_t *mboxq) +lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba) { + LPFC_MBOXQ_t *mboxq; struct lpfc_dmabuf *mp; struct lpfc_mqe *mqe; uint32_t data_length; @@ -4565,10 +4565,16 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba, phba->fc_map[1] = LPFC_FCOE_FCF_MAP1; phba->fc_map[2] = LPFC_FCOE_FCF_MAP2; - mqe = &mboxq->u.mqe; - if (lpfc_sli4_dump_cfg_rg23(phba, mboxq)) + mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mboxq) return -ENOMEM; + mqe = &mboxq->u.mqe; + if (lpfc_sli4_dump_cfg_rg23(phba, mboxq)) { + rc = -ENOMEM; + goto out_free_mboxq; + } + mp = (struct lpfc_dmabuf *) mboxq->context1; rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); @@ -4596,19 +4602,25 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba, if (rc) { lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); - return -EIO; + rc = -EIO; + goto out_free_mboxq; } data_length = mqe->un.mb_words[5]; if (data_length > DMP_RGN23_SIZE) { lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); - return -EIO; + rc = -EIO; + goto out_free_mboxq; } lpfc_parse_fcoe_conf(phba, mp->virt, data_length); lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); - return 0; + rc = 0; + +out_free_mboxq: + mempool_free(mboxq, phba->mbox_mem_pool); + return rc; } /** @@ -4706,7 +4718,6 @@ static int lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba) { LPFC_MBOXQ_t *mboxq; - struct lpfc_mbx_read_config *rd_config; struct lpfc_mbx_get_cntl_attributes *mbx_cntl_attr; struct lpfc_controller_attribute *cntl_attr; struct lpfc_mbx_get_port_name *get_port_name; @@ -4724,33 +4735,11 @@ lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba) mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mboxq) return -ENOMEM; - /* obtain link type and link number via READ_CONFIG */ - lpfc_read_config(phba, mboxq); - rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); - if (rc == MBX_SUCCESS) { - rd_config = &mboxq->u.mqe.un.rd_config; - if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) { - phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL; - phba->sli4_hba.lnk_info.lnk_tp = - bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config); - phba->sli4_hba.lnk_info.lnk_no = - bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config); - lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "3081 lnk_type:%d, lnk_numb:%d\n", - phba->sli4_hba.lnk_info.lnk_tp, - phba->sli4_hba.lnk_info.lnk_no); - goto retrieve_ppname; - } else - lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, - "3082 Mailbox (x%x) returned ldv:x0\n", - bf_get(lpfc_mqe_command, - &mboxq->u.mqe)); - } else - lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, - "3083 Mailbox (x%x) failed, status:x%x\n", - bf_get(lpfc_mqe_command, &mboxq->u.mqe), - bf_get(lpfc_mqe_status, &mboxq->u.mqe)); + phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL; + lpfc_sli4_read_config(phba); + if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL) + goto retrieve_ppname; /* obtain link type and link number via COMMON_GET_CNTL_ATTRIBUTES */ reqlen = sizeof(struct lpfc_mbx_get_cntl_attributes); @@ -5457,6 +5446,8 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) uint16_t count, base; unsigned long longs; + if (!phba->sli4_hba.rpi_hdrs_in_use) + phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi; if (phba->sli4_hba.extents_in_use) { /* * The port supports resource extents. The XRI, VPI, VFI, RPI @@ -5538,9 +5529,10 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) * need any action - just exit. */ if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) == - LPFC_IDX_RSRC_RDY) - return 0; - + LPFC_IDX_RSRC_RDY) { + lpfc_sli4_dealloc_resource_identifiers(phba); + lpfc_sli4_remove_rpis(phba); + } /* RPIs. */ count = phba->sli4_hba.max_cfg_param.max_rpi; base = phba->sli4_hba.max_cfg_param.rpi_base; @@ -5880,14 +5872,6 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) if (!mboxq) return -ENOMEM; - /* - * Continue initialization with default values even if driver failed - * to read FCoE param config regions - */ - if (lpfc_sli4_read_fcoe_params(phba, mboxq)) - lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_INIT, - "2570 Failed to read FCoE parameters\n"); - /* Issue READ_REV to collect vpd and FW information. */ vpd_size = SLI4_PAGE_SIZE; vpd = kzalloc(vpd_size, GFP_KERNEL); @@ -5925,6 +5909,16 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) } /* + * Continue initialization with default values even if driver failed + * to read FCoE param config regions, only read parameters if the + * board is FCoE + */ + if (phba->hba_flag & HBA_FCOE_MODE && + lpfc_sli4_read_fcoe_params(phba)) + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_INIT, + "2570 Failed to read FCoE parameters\n"); + + /* * Retrieve sli4 device physical port name, failure of doing it * is considered as non-fatal. */ @@ -6044,6 +6038,8 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) "rc = x%x\n", rc); goto out_free_mbox; } + /* update physical xri mappings in the scsi buffers */ + lpfc_scsi_buf_update(phba); /* Read the port's service parameters. */ rc = lpfc_read_sparam(phba, mboxq, vport->vpi); @@ -7632,6 +7628,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, int numBdes, i; struct ulp_bde64 bde; struct lpfc_nodelist *ndlp; + uint32_t *pcmd; fip = phba->hba_flag & HBA_FIP_SUPPORT; /* The fcp commands will set command type */ @@ -7685,6 +7682,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, iocbq->iocb.ulpCommand); return IOCB_ERROR; } + wqe->els_req.payload_len = xmit_len; /* Els_reguest64 has a TMO */ bf_set(wqe_tmo, &wqe->els_req.wqe_com, @@ -7699,9 +7697,25 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, bf_set(wqe_ct, &wqe->els_req.wqe_com, ct); bf_set(wqe_pu, &wqe->els_req.wqe_com, 0); /* CCP CCPE PV PRI in word10 were set in the memcpy */ - if (command_type == ELS_COMMAND_FIP) { + if (command_type == ELS_COMMAND_FIP) els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK) >> LPFC_FIP_ELS_ID_SHIFT); + pcmd = (uint32_t *) (((struct lpfc_dmabuf *) + iocbq->context2)->virt); + if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + if (pcmd && (*pcmd == ELS_CMD_FLOGI || + *pcmd == ELS_CMD_PLOGI)) { + bf_set(els_req64_sp, &wqe->els_req, 1); + bf_set(els_req64_sid, &wqe->els_req, + iocbq->vport->fc_myDID); + bf_set(wqe_ct, &wqe->els_req.wqe_com, 1); + bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com, + phba->vpi_ids[phba->pport->vpi]); + } else if (iocbq->context1) { + bf_set(wqe_ct, &wqe->els_req.wqe_com, 0); + bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com, + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); + } } bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); @@ -7862,6 +7876,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, bf_set(wqe_ebde_cnt, &wqe->xmit_els_rsp.wqe_com, 0); bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); + pcmd = (uint32_t *) (((struct lpfc_dmabuf *) + iocbq->context2)->virt); + if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + bf_set(els_req64_sp, &wqe->els_req, 1); + bf_set(els_req64_sid, &wqe->els_req, + iocbq->vport->fc_myDID); + bf_set(wqe_ct, &wqe->els_req.wqe_com, 1); + bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com, + phba->vpi_ids[phba->pport->vpi]); + } command_type = OTHER_COMMAND; break; case CMD_CLOSE_XRI_CN: @@ -8839,12 +8863,14 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, { IOCB_t *irsp = &rspiocb->iocb; uint16_t abort_iotag, abort_context; - struct lpfc_iocbq *abort_iocb; - struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING]; - - abort_iocb = NULL; + struct lpfc_iocbq *abort_iocb = NULL; if (irsp->ulpStatus) { + + /* + * Assume that the port already completed and returned, or + * will return the iocb. Just Log the message. + */ abort_context = cmdiocb->iocb.un.acxri.abortContextTag; abort_iotag = cmdiocb->iocb.un.acxri.abortIoTag; @@ -8862,68 +8888,15 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, */ abort_iocb = phba->sli.iocbq_lookup[abort_context]; - /* - * If the iocb is not found in Firmware queue the iocb - * might have completed already. Do not free it again. - */ - if (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) { - if (irsp->un.ulpWord[4] != IOERR_NO_XRI) { - spin_unlock_irq(&phba->hbalock); - lpfc_sli_release_iocbq(phba, cmdiocb); - return; - } - /* For SLI4 the ulpContext field for abort IOCB - * holds the iotag of the IOCB being aborted so - * the local abort_context needs to be reset to - * match the aborted IOCBs ulpContext. - */ - if (abort_iocb && phba->sli_rev == LPFC_SLI_REV4) - abort_context = abort_iocb->iocb.ulpContext; - } - lpfc_printf_log(phba, KERN_WARNING, LOG_ELS | LOG_SLI, "0327 Cannot abort els iocb %p " "with tag %x context %x, abort status %x, " "abort code %x\n", abort_iocb, abort_iotag, abort_context, irsp->ulpStatus, irsp->un.ulpWord[4]); - /* - * make sure we have the right iocbq before taking it - * off the txcmplq and try to call completion routine. - */ - if (!abort_iocb || - abort_iocb->iocb.ulpContext != abort_context || - (abort_iocb->iocb_flag & LPFC_DRIVER_ABORTED) == 0) - spin_unlock_irq(&phba->hbalock); - else if (phba->sli_rev < LPFC_SLI_REV4) { - /* - * leave the SLI4 aborted command on the txcmplq - * list and the command complete WCQE's XB bit - * will tell whether the SGL (XRI) can be released - * immediately or to the aborted SGL list for the - * following abort XRI from the HBA. - */ - list_del_init(&abort_iocb->list); - if (abort_iocb->iocb_flag & LPFC_IO_ON_Q) { - abort_iocb->iocb_flag &= ~LPFC_IO_ON_Q; - pring->txcmplq_cnt--; - } - - /* Firmware could still be in progress of DMAing - * payload, so don't free data buffer till after - * a hbeat. - */ - abort_iocb->iocb_flag |= LPFC_DELAY_MEM_FREE; - abort_iocb->iocb_flag &= ~LPFC_DRIVER_ABORTED; - spin_unlock_irq(&phba->hbalock); - abort_iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT; - abort_iocb->iocb.un.ulpWord[4] = IOERR_ABORT_REQUESTED; - (abort_iocb->iocb_cmpl)(phba, abort_iocb, abort_iocb); - } else - spin_unlock_irq(&phba->hbalock); + spin_unlock_irq(&phba->hbalock); } - lpfc_sli_release_iocbq(phba, cmdiocb); return; } @@ -12167,6 +12140,7 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq, wq->subtype = subtype; wq->host_index = 0; wq->hba_index = 0; + wq->entry_repost = LPFC_RELEASE_NOTIFICATION_INTERVAL; /* link the wq onto the parent cq child list */ list_add_tail(&wq->list, &cq->child_list); diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index d5cffd8af340..7d444c444db4 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -291,7 +291,7 @@ struct lpfc_bmbx { #define LPFC_RQE_SIZE 8 #define LPFC_EQE_DEF_COUNT 1024 -#define LPFC_CQE_DEF_COUNT 256 +#define LPFC_CQE_DEF_COUNT 1024 #define LPFC_WQE_DEF_COUNT 256 #define LPFC_MQE_DEF_COUNT 16 #define LPFC_RQE_DEF_COUNT 512 |