summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mac_scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/mac_scsi.c')
-rw-r--r--drivers/scsi/mac_scsi.c421
1 files changed, 260 insertions, 161 deletions
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index dba9517d9553..9c5566217ef6 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -4,6 +4,8 @@
*
* Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
*
+ * Copyright 2019 Finn Thain
+ *
* derived in part from:
*/
/*
@@ -12,6 +14,7 @@
* Copyright 1995, Russell King
*/
+#include <linux/delay.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/ioport.h>
@@ -22,6 +25,7 @@
#include <asm/hwtest.h>
#include <asm/io.h>
+#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/setup.h>
@@ -53,7 +57,7 @@ static int setup_cmd_per_lun = -1;
module_param(setup_cmd_per_lun, int, 0);
static int setup_sg_tablesize = -1;
module_param(setup_sg_tablesize, int, 0);
-static int setup_use_pdma = -1;
+static int setup_use_pdma = 512;
module_param(setup_use_pdma, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
@@ -90,223 +94,318 @@ static int __init mac_scsi_setup(char *str)
__setup("mac5380=", mac_scsi_setup);
#endif /* !MODULE */
-/* Pseudo DMA asm originally by Ove Edlund */
-
-#define CP_IO_TO_MEM(s,d,n) \
-__asm__ __volatile__ \
- (" cmp.w #4,%2\n" \
- " bls 8f\n" \
- " move.w %1,%%d0\n" \
- " neg.b %%d0\n" \
- " and.w #3,%%d0\n" \
- " sub.w %%d0,%2\n" \
- " bra 2f\n" \
- " 1: move.b (%0),(%1)+\n" \
- " 2: dbf %%d0,1b\n" \
- " move.w %2,%%d0\n" \
- " lsr.w #5,%%d0\n" \
- " bra 4f\n" \
- " 3: move.l (%0),(%1)+\n" \
- "31: move.l (%0),(%1)+\n" \
- "32: move.l (%0),(%1)+\n" \
- "33: move.l (%0),(%1)+\n" \
- "34: move.l (%0),(%1)+\n" \
- "35: move.l (%0),(%1)+\n" \
- "36: move.l (%0),(%1)+\n" \
- "37: move.l (%0),(%1)+\n" \
- " 4: dbf %%d0,3b\n" \
- " move.w %2,%%d0\n" \
- " lsr.w #2,%%d0\n" \
- " and.w #7,%%d0\n" \
- " bra 6f\n" \
- " 5: move.l (%0),(%1)+\n" \
- " 6: dbf %%d0,5b\n" \
- " and.w #3,%2\n" \
- " bra 8f\n" \
- " 7: move.b (%0),(%1)+\n" \
- " 8: dbf %2,7b\n" \
- " moveq.l #0, %2\n" \
- " 9: \n" \
- ".section .fixup,\"ax\"\n" \
- " .even\n" \
- "91: moveq.l #1, %2\n" \
- " jra 9b\n" \
- "94: moveq.l #4, %2\n" \
- " jra 9b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,91b\n" \
- " .long 3b,94b\n" \
- " .long 31b,94b\n" \
- " .long 32b,94b\n" \
- " .long 33b,94b\n" \
- " .long 34b,94b\n" \
- " .long 35b,94b\n" \
- " .long 36b,94b\n" \
- " .long 37b,94b\n" \
- " .long 5b,94b\n" \
- " .long 7b,91b\n" \
- ".previous" \
- : "=a"(s), "=a"(d), "=d"(n) \
- : "0"(s), "1"(d), "2"(n) \
- : "d0")
+/*
+ * According to "Inside Macintosh: Devices", Mac OS requires disk drivers to
+ * specify the number of bytes between the delays expected from a SCSI target.
+ * This allows the operating system to "prevent bus errors when a target fails
+ * to deliver the next byte within the processor bus error timeout period."
+ * Linux SCSI drivers lack knowledge of the timing behaviour of SCSI targets
+ * so bus errors are unavoidable.
+ *
+ * If a MOVE.B instruction faults, we assume that zero bytes were transferred
+ * and simply retry. That assumption probably depends on target behaviour but
+ * seems to hold up okay. The NOP provides synchronization: without it the
+ * fault can sometimes occur after the program counter has moved past the
+ * offending instruction. Post-increment addressing can't be used.
+ */
+
+#define MOVE_BYTE(operands) \
+ asm volatile ( \
+ "1: moveb " operands " \n" \
+ "11: nop \n" \
+ " addq #1,%0 \n" \
+ " subq #1,%1 \n" \
+ "40: \n" \
+ " \n" \
+ ".section .fixup,\"ax\" \n" \
+ ".even \n" \
+ "90: movel #1, %2 \n" \
+ " jra 40b \n" \
+ ".previous \n" \
+ " \n" \
+ ".section __ex_table,\"a\" \n" \
+ ".align 4 \n" \
+ ".long 1b,90b \n" \
+ ".long 11b,90b \n" \
+ ".previous \n" \
+ : "+a" (addr), "+r" (n), "+r" (result) : "a" (io))
+
+/*
+ * If a MOVE.W (or MOVE.L) instruction faults, it cannot be retried because
+ * the residual byte count would be uncertain. In that situation the MOVE_WORD
+ * macro clears n in the fixup section to abort the transfer.
+ */
+
+#define MOVE_WORD(operands) \
+ asm volatile ( \
+ "1: movew " operands " \n" \
+ "11: nop \n" \
+ " subq #2,%1 \n" \
+ "40: \n" \
+ " \n" \
+ ".section .fixup,\"ax\" \n" \
+ ".even \n" \
+ "90: movel #0, %1 \n" \
+ " movel #2, %2 \n" \
+ " jra 40b \n" \
+ ".previous \n" \
+ " \n" \
+ ".section __ex_table,\"a\" \n" \
+ ".align 4 \n" \
+ ".long 1b,90b \n" \
+ ".long 11b,90b \n" \
+ ".previous \n" \
+ : "+a" (addr), "+r" (n), "+r" (result) : "a" (io))
+
+#define MOVE_16_WORDS(operands) \
+ asm volatile ( \
+ "1: movew " operands " \n" \
+ "2: movew " operands " \n" \
+ "3: movew " operands " \n" \
+ "4: movew " operands " \n" \
+ "5: movew " operands " \n" \
+ "6: movew " operands " \n" \
+ "7: movew " operands " \n" \
+ "8: movew " operands " \n" \
+ "9: movew " operands " \n" \
+ "10: movew " operands " \n" \
+ "11: movew " operands " \n" \
+ "12: movew " operands " \n" \
+ "13: movew " operands " \n" \
+ "14: movew " operands " \n" \
+ "15: movew " operands " \n" \
+ "16: movew " operands " \n" \
+ "17: nop \n" \
+ " subl #32,%1 \n" \
+ "40: \n" \
+ " \n" \
+ ".section .fixup,\"ax\" \n" \
+ ".even \n" \
+ "90: movel #0, %1 \n" \
+ " movel #2, %2 \n" \
+ " jra 40b \n" \
+ ".previous \n" \
+ " \n" \
+ ".section __ex_table,\"a\" \n" \
+ ".align 4 \n" \
+ ".long 1b,90b \n" \
+ ".long 2b,90b \n" \
+ ".long 3b,90b \n" \
+ ".long 4b,90b \n" \
+ ".long 5b,90b \n" \
+ ".long 6b,90b \n" \
+ ".long 7b,90b \n" \
+ ".long 8b,90b \n" \
+ ".long 9b,90b \n" \
+ ".long 10b,90b \n" \
+ ".long 11b,90b \n" \
+ ".long 12b,90b \n" \
+ ".long 13b,90b \n" \
+ ".long 14b,90b \n" \
+ ".long 15b,90b \n" \
+ ".long 16b,90b \n" \
+ ".long 17b,90b \n" \
+ ".previous \n" \
+ : "+a" (addr), "+r" (n), "+r" (result) : "a" (io))
+
+#define MAC_PDMA_DELAY 32
+
+static inline int mac_pdma_recv(void __iomem *io, unsigned char *start, int n)
+{
+ unsigned char *addr = start;
+ int result = 0;
+
+ if (n >= 1) {
+ MOVE_BYTE("%3@,%0@");
+ if (result)
+ goto out;
+ }
+ if (n >= 1 && ((unsigned long)addr & 1)) {
+ MOVE_BYTE("%3@,%0@");
+ if (result)
+ goto out;
+ }
+ while (n >= 32)
+ MOVE_16_WORDS("%3@,%0@+");
+ while (n >= 2)
+ MOVE_WORD("%3@,%0@+");
+ if (result)
+ return start - addr; /* Negated to indicate uncertain length */
+ if (n == 1)
+ MOVE_BYTE("%3@,%0@");
+out:
+ return addr - start;
+}
+
+static inline int mac_pdma_send(unsigned char *start, void __iomem *io, int n)
+{
+ unsigned char *addr = start;
+ int result = 0;
+
+ if (n >= 1) {
+ MOVE_BYTE("%0@,%3@");
+ if (result)
+ goto out;
+ }
+ if (n >= 1 && ((unsigned long)addr & 1)) {
+ MOVE_BYTE("%0@,%3@");
+ if (result)
+ goto out;
+ }
+ while (n >= 32)
+ MOVE_16_WORDS("%0@+,%3@");
+ while (n >= 2)
+ MOVE_WORD("%0@+,%3@");
+ if (result)
+ return start - addr; /* Negated to indicate uncertain length */
+ if (n == 1)
+ MOVE_BYTE("%0@,%3@");
+out:
+ return addr - start;
+}
+
+/* The "SCSI DMA" chip on the IIfx implements this register. */
+#define CTRL_REG 0x8
+#define CTRL_INTERRUPTS_ENABLE BIT(1)
+#define CTRL_HANDSHAKE_MODE BIT(3)
+
+static inline void write_ctrl_reg(struct NCR5380_hostdata *hostdata, u32 value)
+{
+ out_be32(hostdata->io + (CTRL_REG << 4), value);
+}
static inline int macscsi_pread(struct NCR5380_hostdata *hostdata,
unsigned char *dst, int len)
{
u8 __iomem *s = hostdata->pdma_io + (INPUT_DATA_REG << 4);
unsigned char *d = dst;
- int n = len;
- int transferred;
+ int result = 0;
+
+ hostdata->pdma_residual = len;
while (!NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
BASR_DRQ | BASR_PHASE_MATCH,
BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) {
- CP_IO_TO_MEM(s, d, n);
+ int bytes;
+
+ if (macintosh_config->ident == MAC_MODEL_IIFX)
+ write_ctrl_reg(hostdata, CTRL_HANDSHAKE_MODE |
+ CTRL_INTERRUPTS_ENABLE);
- transferred = d - dst - n;
- hostdata->pdma_residual = len - transferred;
+ bytes = mac_pdma_recv(s, d, min(hostdata->pdma_residual, 512));
- /* No bus error. */
- if (n == 0)
- return 0;
+ if (bytes > 0) {
+ d += bytes;
+ hostdata->pdma_residual -= bytes;
+ }
+
+ if (hostdata->pdma_residual == 0)
+ goto out;
- /* Target changed phase early? */
if (NCR5380_poll_politely2(hostdata, STATUS_REG, SR_REQ, SR_REQ,
- BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0)
- scmd_printk(KERN_ERR, hostdata->connected,
+ BUS_AND_STATUS_REG, BASR_ACK,
+ BASR_ACK, HZ / 64) < 0)
+ scmd_printk(KERN_DEBUG, hostdata->connected,
"%s: !REQ and !ACK\n", __func__);
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
- return 0;
+ goto out;
+
+ if (bytes == 0)
+ udelay(MAC_PDMA_DELAY);
+
+ if (bytes >= 0)
+ continue;
dsprintk(NDEBUG_PSEUDO_DMA, hostdata->host,
- "%s: bus error (%d/%d)\n", __func__, transferred, len);
+ "%s: bus error (%d/%d)\n", __func__, d - dst, len);
NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host);
- d = dst + transferred;
- n = len - transferred;
+ result = -1;
+ goto out;
}
scmd_printk(KERN_ERR, hostdata->connected,
"%s: phase mismatch or !DRQ\n", __func__);
NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host);
- return -1;
+ result = -1;
+out:
+ if (macintosh_config->ident == MAC_MODEL_IIFX)
+ write_ctrl_reg(hostdata, CTRL_INTERRUPTS_ENABLE);
+ return result;
}
-
-#define CP_MEM_TO_IO(s,d,n) \
-__asm__ __volatile__ \
- (" cmp.w #4,%2\n" \
- " bls 8f\n" \
- " move.w %0,%%d0\n" \
- " neg.b %%d0\n" \
- " and.w #3,%%d0\n" \
- " sub.w %%d0,%2\n" \
- " bra 2f\n" \
- " 1: move.b (%0)+,(%1)\n" \
- " 2: dbf %%d0,1b\n" \
- " move.w %2,%%d0\n" \
- " lsr.w #5,%%d0\n" \
- " bra 4f\n" \
- " 3: move.l (%0)+,(%1)\n" \
- "31: move.l (%0)+,(%1)\n" \
- "32: move.l (%0)+,(%1)\n" \
- "33: move.l (%0)+,(%1)\n" \
- "34: move.l (%0)+,(%1)\n" \
- "35: move.l (%0)+,(%1)\n" \
- "36: move.l (%0)+,(%1)\n" \
- "37: move.l (%0)+,(%1)\n" \
- " 4: dbf %%d0,3b\n" \
- " move.w %2,%%d0\n" \
- " lsr.w #2,%%d0\n" \
- " and.w #7,%%d0\n" \
- " bra 6f\n" \
- " 5: move.l (%0)+,(%1)\n" \
- " 6: dbf %%d0,5b\n" \
- " and.w #3,%2\n" \
- " bra 8f\n" \
- " 7: move.b (%0)+,(%1)\n" \
- " 8: dbf %2,7b\n" \
- " moveq.l #0, %2\n" \
- " 9: \n" \
- ".section .fixup,\"ax\"\n" \
- " .even\n" \
- "91: moveq.l #1, %2\n" \
- " jra 9b\n" \
- "94: moveq.l #4, %2\n" \
- " jra 9b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 4\n" \
- " .long 1b,91b\n" \
- " .long 3b,94b\n" \
- " .long 31b,94b\n" \
- " .long 32b,94b\n" \
- " .long 33b,94b\n" \
- " .long 34b,94b\n" \
- " .long 35b,94b\n" \
- " .long 36b,94b\n" \
- " .long 37b,94b\n" \
- " .long 5b,94b\n" \
- " .long 7b,91b\n" \
- ".previous" \
- : "=a"(s), "=a"(d), "=d"(n) \
- : "0"(s), "1"(d), "2"(n) \
- : "d0")
-
static inline int macscsi_pwrite(struct NCR5380_hostdata *hostdata,
unsigned char *src, int len)
{
unsigned char *s = src;
u8 __iomem *d = hostdata->pdma_io + (OUTPUT_DATA_REG << 4);
- int n = len;
- int transferred;
+ int result = 0;
+
+ hostdata->pdma_residual = len;
while (!NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
BASR_DRQ | BASR_PHASE_MATCH,
BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) {
- CP_MEM_TO_IO(s, d, n);
+ int bytes;
- transferred = s - src - n;
- hostdata->pdma_residual = len - transferred;
+ if (macintosh_config->ident == MAC_MODEL_IIFX)
+ write_ctrl_reg(hostdata, CTRL_HANDSHAKE_MODE |
+ CTRL_INTERRUPTS_ENABLE);
- /* Target changed phase early? */
- if (NCR5380_poll_politely2(hostdata, STATUS_REG, SR_REQ, SR_REQ,
- BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0)
- scmd_printk(KERN_ERR, hostdata->connected,
- "%s: !REQ and !ACK\n", __func__);
- if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
- return 0;
+ bytes = mac_pdma_send(s, d, min(hostdata->pdma_residual, 512));
+
+ if (bytes > 0) {
+ s += bytes;
+ hostdata->pdma_residual -= bytes;
+ }
- /* No bus error. */
- if (n == 0) {
+ if (hostdata->pdma_residual == 0) {
if (NCR5380_poll_politely(hostdata, TARGET_COMMAND_REG,
TCR_LAST_BYTE_SENT,
- TCR_LAST_BYTE_SENT, HZ / 64) < 0)
+ TCR_LAST_BYTE_SENT,
+ HZ / 64) < 0) {
scmd_printk(KERN_ERR, hostdata->connected,
"%s: Last Byte Sent timeout\n", __func__);
- return 0;
+ result = -1;
+ }
+ goto out;
}
+ if (NCR5380_poll_politely2(hostdata, STATUS_REG, SR_REQ, SR_REQ,
+ BUS_AND_STATUS_REG, BASR_ACK,
+ BASR_ACK, HZ / 64) < 0)
+ scmd_printk(KERN_DEBUG, hostdata->connected,
+ "%s: !REQ and !ACK\n", __func__);
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
+ goto out;
+
+ if (bytes == 0)
+ udelay(MAC_PDMA_DELAY);
+
+ if (bytes >= 0)
+ continue;
+
dsprintk(NDEBUG_PSEUDO_DMA, hostdata->host,
- "%s: bus error (%d/%d)\n", __func__, transferred, len);
+ "%s: bus error (%d/%d)\n", __func__, s - src, len);
NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host);
- s = src + transferred;
- n = len - transferred;
+ result = -1;
+ goto out;
}
scmd_printk(KERN_ERR, hostdata->connected,
"%s: phase mismatch or !DRQ\n", __func__);
NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host);
-
- return -1;
+ result = -1;
+out:
+ if (macintosh_config->ident == MAC_MODEL_IIFX)
+ write_ctrl_reg(hostdata, CTRL_INTERRUPTS_ENABLE);
+ return result;
}
static int macscsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
struct scsi_cmnd *cmd)
{
if (hostdata->flags & FLAG_NO_PSEUDO_DMA ||
- cmd->SCp.this_residual < 16)
+ cmd->SCp.this_residual < setup_use_pdma)
return 0;
return cmd->SCp.this_residual;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 23:55:10 +0100