summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qedf/qedf_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qedf/qedf_main.c')
-rw-r--r--drivers/scsi/qedf/qedf_main.c151
1 files changed, 123 insertions, 28 deletions
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 5ca424df355c..46d185cb9ea8 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -41,7 +41,7 @@ MODULE_PARM_DESC(dev_loss_tmo, " dev_loss_tmo setting for attached "
"remote ports (default 60)");
uint qedf_debug = QEDF_LOG_INFO;
-module_param_named(debug, qedf_debug, uint, S_IRUGO);
+module_param_named(debug, qedf_debug, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(debug, " Debug mask. Pass '1' to enable default debugging"
" mask");
@@ -105,6 +105,12 @@ module_param_named(dp_level, qedf_dp_level, uint, S_IRUGO);
MODULE_PARM_DESC(dp_level, " printk verbosity control passed to qed module "
"during probe (0-3: 0 more verbose).");
+static bool qedf_enable_recovery = true;
+module_param_named(enable_recovery, qedf_enable_recovery,
+ bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_recovery, "Enable/disable recovery on driver/firmware "
+ "interface level errors 0 = Disabled, 1 = Enabled (Default: 1).");
+
struct workqueue_struct *qedf_io_wq;
static struct fcoe_percpu_s qedf_global;
@@ -690,6 +696,7 @@ static struct qed_fcoe_cb_ops qedf_cb_ops = {
.dcbx_aen = qedf_dcbx_handler,
.get_generic_tlv_data = qedf_get_generic_tlv_data,
.get_protocol_tlv_data = qedf_get_protocol_tlv_data,
+ .schedule_hw_err_handler = qedf_schedule_hw_err_handler,
}
};
@@ -726,7 +733,7 @@ static int qedf_eh_abort(struct scsi_cmnd *sc_cmd)
rdata = fcport->rdata;
if (!rdata || !kref_get_unless_zero(&rdata->kref)) {
QEDF_ERR(&qedf->dbg_ctx, "stale rport, sc_cmd=%p\n", sc_cmd);
- rc = 1;
+ rc = SUCCESS;
goto out;
}
@@ -1333,7 +1340,7 @@ static int qedf_offload_connection(struct qedf_ctx *qedf,
ether_addr_copy(conn_info.dst_mac, qedf->ctlr.dest_addr);
conn_info.tx_max_fc_pay_len = fcport->rdata->maxframe_size;
- conn_info.e_d_tov_timer_val = qedf->lport->e_d_tov / 20;
+ conn_info.e_d_tov_timer_val = qedf->lport->e_d_tov;
conn_info.rec_tov_timer_val = 3; /* I think this is what E3 was */
conn_info.rx_max_fc_pay_len = fcport->rdata->maxframe_size;
@@ -1558,6 +1565,17 @@ static void qedf_rport_event_handler(struct fc_lport *lport,
if (port_id == FC_FID_DIR_SERV)
break;
+ if (rdata->spp_type != FC_TYPE_FCP) {
+ QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
+ "No action since spp type isn't FCP\n");
+ break;
+ }
+ if (!(rdata->ids.roles & FC_RPORT_ROLE_FCP_TARGET)) {
+ QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
+ "Not FCP target so no action\n");
+ break;
+ }
+
if (!rport) {
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
"port_id=%x - rport notcreated Yet!!\n", port_id);
@@ -1634,11 +1652,13 @@ static void qedf_fcoe_ctlr_setup(struct qedf_ctx *qedf)
static void qedf_setup_fdmi(struct qedf_ctx *qedf)
{
struct fc_lport *lport = qedf->lport;
- struct fc_host_attrs *fc_host = shost_to_fc_host(lport->host);
- u64 dsn;
+ u8 buf[8];
+ int pos;
+ uint32_t i;
/*
- * fdmi_enabled needs to be set for libfc to execute FDMI registration.
+ * fdmi_enabled needs to be set for libfc
+ * to execute FDMI registration
*/
lport->fdmi_enabled = 1;
@@ -1648,32 +1668,53 @@ static void qedf_setup_fdmi(struct qedf_ctx *qedf)
*/
/* Get the PCI-e Device Serial Number Capability */
- dsn = pci_get_dsn(qedf->pdev);
- if (dsn)
- snprintf(fc_host->serial_number,
- sizeof(fc_host->serial_number), "%016llX", dsn);
- else
- snprintf(fc_host->serial_number,
- sizeof(fc_host->serial_number), "Unknown");
+ pos = pci_find_ext_capability(qedf->pdev, PCI_EXT_CAP_ID_DSN);
+ if (pos) {
+ pos += 4;
+ for (i = 0; i < 8; i++)
+ pci_read_config_byte(qedf->pdev, pos + i, &buf[i]);
+
+ snprintf(fc_host_serial_number(lport->host),
+ FC_SERIAL_NUMBER_SIZE,
+ "%02X%02X%02X%02X%02X%02X%02X%02X",
+ buf[7], buf[6], buf[5], buf[4],
+ buf[3], buf[2], buf[1], buf[0]);
+ } else
+ snprintf(fc_host_serial_number(lport->host),
+ FC_SERIAL_NUMBER_SIZE, "Unknown");
+
+ snprintf(fc_host_manufacturer(lport->host),
+ FC_SERIAL_NUMBER_SIZE, "%s", "Marvell Semiconductor Inc.");
+
+ if (qedf->pdev->device == QL45xxx) {
+ snprintf(fc_host_model(lport->host),
+ FC_SYMBOLIC_NAME_SIZE, "%s", "QL45xxx");
+
+ snprintf(fc_host_model_description(lport->host),
+ FC_SYMBOLIC_NAME_SIZE, "%s",
+ "Marvell FastLinQ QL45xxx FCoE Adapter");
+ }
- snprintf(fc_host->manufacturer,
- sizeof(fc_host->manufacturer), "%s", "Cavium Inc.");
+ if (qedf->pdev->device == QL41xxx) {
+ snprintf(fc_host_model(lport->host),
+ FC_SYMBOLIC_NAME_SIZE, "%s", "QL41xxx");
- snprintf(fc_host->model, sizeof(fc_host->model), "%s", "QL41000");
+ snprintf(fc_host_model_description(lport->host),
+ FC_SYMBOLIC_NAME_SIZE, "%s",
+ "Marvell FastLinQ QL41xxx FCoE Adapter");
+ }
- snprintf(fc_host->model_description, sizeof(fc_host->model_description),
- "%s", "QLogic FastLinQ QL41000 Series 10/25/40/50GGbE Controller"
- "(FCoE)");
+ snprintf(fc_host_hardware_version(lport->host),
+ FC_VERSION_STRING_SIZE, "Rev %d", qedf->pdev->revision);
- snprintf(fc_host->hardware_version, sizeof(fc_host->hardware_version),
- "Rev %d", qedf->pdev->revision);
+ snprintf(fc_host_driver_version(lport->host),
+ FC_VERSION_STRING_SIZE, "%s", QEDF_VERSION);
- snprintf(fc_host->driver_version, sizeof(fc_host->driver_version),
- "%s", QEDF_VERSION);
+ snprintf(fc_host_firmware_version(lport->host),
+ FC_VERSION_STRING_SIZE, "%d.%d.%d.%d",
+ FW_MAJOR_VERSION, FW_MINOR_VERSION, FW_REVISION_VERSION,
+ FW_ENGINEERING_VERSION);
- snprintf(fc_host->firmware_version, sizeof(fc_host->firmware_version),
- "%d.%d.%d.%d", FW_MAJOR_VERSION, FW_MINOR_VERSION,
- FW_REVISION_VERSION, FW_ENGINEERING_VERSION);
}
static int qedf_lport_setup(struct qedf_ctx *qedf)
@@ -1720,8 +1761,13 @@ static int qedf_lport_setup(struct qedf_ctx *qedf)
fc_host_dev_loss_tmo(lport->host) = qedf_dev_loss_tmo;
/* Set symbolic node name */
- snprintf(fc_host_symbolic_name(lport->host), 256,
- "QLogic %s v%s", QEDF_MODULE_NAME, QEDF_VERSION);
+ if (qedf->pdev->device == QL45xxx)
+ snprintf(fc_host_symbolic_name(lport->host), 256,
+ "Marvell FastLinQ 45xxx FCoE v%s", QEDF_VERSION);
+
+ if (qedf->pdev->device == QL41xxx)
+ snprintf(fc_host_symbolic_name(lport->host), 256,
+ "Marvell FastLinQ 41xxx FCoE v%s", QEDF_VERSION);
qedf_setup_fdmi(qedf);
@@ -3221,11 +3267,16 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
void *task_start, *task_end;
struct qed_slowpath_params slowpath_params;
struct qed_probe_params qed_params;
+ u16 retry_cnt = 10;
/*
* When doing error recovery we didn't reap the lport so don't try
* to reallocate it.
*/
+retry_probe:
+ if (mode == QEDF_MODE_RECOVERY)
+ msleep(2000);
+
if (mode != QEDF_MODE_RECOVERY) {
lport = libfc_host_alloc(&qedf_host_template,
sizeof(struct qedf_ctx));
@@ -3312,6 +3363,12 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
qed_params.is_vf = is_vf;
qedf->cdev = qed_ops->common->probe(pdev, &qed_params);
if (!qedf->cdev) {
+ if ((mode == QEDF_MODE_RECOVERY) && retry_cnt) {
+ QEDF_ERR(&qedf->dbg_ctx,
+ "Retry %d initialize hardware\n", retry_cnt);
+ retry_cnt--;
+ goto retry_probe;
+ }
QEDF_ERR(&qedf->dbg_ctx, "common probe failed.\n");
rc = -ENODEV;
goto err1;
@@ -3760,6 +3817,44 @@ void qedf_wq_grcdump(struct work_struct *work)
qedf_capture_grc_dump(qedf);
}
+void qedf_schedule_hw_err_handler(void *dev, enum qed_hw_err_type err_type)
+{
+ struct qedf_ctx *qedf = dev;
+
+ QEDF_ERR(&(qedf->dbg_ctx),
+ "Hardware error handler scheduled, event=%d.\n",
+ err_type);
+
+ if (test_bit(QEDF_IN_RECOVERY, &qedf->flags)) {
+ QEDF_ERR(&(qedf->dbg_ctx),
+ "Already in recovery, not scheduling board disable work.\n");
+ return;
+ }
+
+ switch (err_type) {
+ case QED_HW_ERR_FAN_FAIL:
+ schedule_delayed_work(&qedf->board_disable_work, 0);
+ break;
+ case QED_HW_ERR_MFW_RESP_FAIL:
+ case QED_HW_ERR_HW_ATTN:
+ case QED_HW_ERR_DMAE_FAIL:
+ case QED_HW_ERR_FW_ASSERT:
+ /* Prevent HW attentions from being reasserted */
+ qed_ops->common->attn_clr_enable(qedf->cdev, true);
+ break;
+ case QED_HW_ERR_RAMROD_FAIL:
+ /* Prevent HW attentions from being reasserted */
+ qed_ops->common->attn_clr_enable(qedf->cdev, true);
+
+ if (qedf_enable_recovery)
+ qed_ops->common->recovery_process(qedf->cdev);
+
+ break;
+ default:
+ break;
+ }
+}
+
/*
* Protocol TLV handler
*/