diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 406 |
1 files changed, 364 insertions, 42 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 52ed56ecf195..f6368a1d3021 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -552,10 +552,6 @@ qla24xx_reset_risc(scsi_qla_host_t *vha) d2 = RD_REG_DWORD(®->ctrl_status); barrier(); } - if (cnt == 0 || hw_evt) - qla2xxx_hw_event_log(vha, HW_EVENT_RESET_ERR, - RD_REG_WORD(®->mailbox1), RD_REG_WORD(®->mailbox2), - RD_REG_WORD(®->mailbox3)); WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); RD_REG_DWORD(®->hccr); @@ -574,6 +570,9 @@ qla24xx_reset_risc(scsi_qla_host_t *vha) } spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (IS_NOPOLLING_TYPE(ha)) + ha->isp_ops->enable_intrs(ha); } /** @@ -779,16 +778,19 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) mem_size = (ha->fw_memory_size - 0x11000 + 1) * sizeof(uint16_t); } else if (IS_FWI2_CAPABLE(ha)) { - fixed_size = IS_QLA25XX(ha) ? - offsetof(struct qla25xx_fw_dump, ext_mem) : - offsetof(struct qla24xx_fw_dump, ext_mem); + if (IS_QLA81XX(ha)) + fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem); + else if (IS_QLA25XX(ha)) + fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem); + else + fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem); mem_size = (ha->fw_memory_size - 0x100000 + 1) * sizeof(uint32_t); if (ha->mqenable) mq_size = sizeof(struct qla2xxx_mq_chain); /* Allocate memory for Fibre Channel Event Buffer. */ - if (!IS_QLA25XX(ha)) + if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)) goto try_eft; tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma, @@ -851,7 +853,9 @@ cont_alloc: dump_size = offsetof(struct qla2xxx_fw_dump, isp); dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + - mq_size + eft_size + fce_size; + eft_size; + ha->chain_offset = dump_size; + dump_size += mq_size + fce_size; ha->fw_dump = vmalloc(dump_size); if (!ha->fw_dump) { @@ -987,7 +991,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha) &ha->fw_major_version, &ha->fw_minor_version, &ha->fw_subminor_version, - &ha->fw_attributes, &ha->fw_memory_size); + &ha->fw_attributes, &ha->fw_memory_size, + ha->mpi_version, &ha->mpi_capabilities); ha->flags.npiv_supported = 0; if (IS_QLA2XXX_MIDTYPE(ha) && (ha->fw_attributes & BIT_2)) { @@ -1253,35 +1258,48 @@ qla2x00_init_rings(scsi_qla_host_t *vha) { int rval; unsigned long flags = 0; - int cnt; + int cnt, que; struct qla_hw_data *ha = vha->hw; - struct req_que *req = ha->req_q_map[0]; - struct rsp_que *rsp = ha->rsp_q_map[0]; + struct req_que *req; + struct rsp_que *rsp; + struct scsi_qla_host *vp; struct mid_init_cb_24xx *mid_init_cb = (struct mid_init_cb_24xx *) ha->init_cb; spin_lock_irqsave(&ha->hardware_lock, flags); /* Clear outstanding commands array. */ - for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) - req->outstanding_cmds[cnt] = NULL; + for (que = 0; que < ha->max_queues; que++) { + req = ha->req_q_map[que]; + if (!req) + continue; + for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) + req->outstanding_cmds[cnt] = NULL; - req->current_outstanding_cmd = 0; + req->current_outstanding_cmd = 0; - /* Clear RSCN queue. */ - vha->rscn_in_ptr = 0; - vha->rscn_out_ptr = 0; + /* Initialize firmware. */ + req->ring_ptr = req->ring; + req->ring_index = 0; + req->cnt = req->length; + } - /* Initialize firmware. */ - req->ring_ptr = req->ring; - req->ring_index = 0; - req->cnt = req->length; - rsp->ring_ptr = rsp->ring; - rsp->ring_index = 0; + for (que = 0; que < ha->max_queues; que++) { + rsp = ha->rsp_q_map[que]; + if (!rsp) + continue; + rsp->ring_ptr = rsp->ring; + rsp->ring_index = 0; - /* Initialize response queue entries */ - qla2x00_init_response_q_entries(rsp); + /* Initialize response queue entries */ + qla2x00_init_response_q_entries(rsp); + } + /* Clear RSCN queue. */ + list_for_each_entry(vp, &ha->vp_list, list) { + vp->rscn_in_ptr = 0; + vp->rscn_out_ptr = 0; + } ha->isp_ops->config_rings(vha); spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -1665,10 +1683,6 @@ qla2x00_nvram_config(scsi_qla_host_t *vha) qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet " "invalid -- WWPN) defaults.\n"); - if (chksum) - qla2xxx_hw_event_log(vha, HW_EVENT_NVRAM_CHKSUM_ERR, 0, - MSW(chksum), LSW(chksum)); - /* * Set default initialization control block. */ @@ -3211,8 +3225,8 @@ qla2x00_loop_resync(scsi_qla_host_t *vha) int rval = QLA_SUCCESS; uint32_t wait_time; struct qla_hw_data *ha = vha->hw; - struct req_que *req = ha->req_q_map[0]; - struct rsp_que *rsp = ha->rsp_q_map[0]; + struct req_que *req = ha->req_q_map[vha->req_ques[0]]; + struct rsp_que *rsp = req->rsp; atomic_set(&vha->loop_state, LOOP_UPDATE); clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); @@ -3491,6 +3505,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) } req = ha->req_q_map[i]; if (req) { + /* Clear outstanding commands array. */ req->options &= ~BIT_0; ret = qla25xx_init_req_que(base_vha, req, req->options); if (ret != QLA_SUCCESS) @@ -3499,7 +3514,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) req->id)); else DEBUG2_17(printk(KERN_WARNING - "%s Rsp que:%d inited\n", __func__, + "%s Req que:%d inited\n", __func__, req->id)); } } @@ -3547,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha) WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); RD_REG_DWORD(®->hccr); spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (IS_NOPOLLING_TYPE(ha)) + ha->isp_ops->enable_intrs(ha); } /* On sparc systems, obtain port and node WWN from firmware @@ -3832,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr) uint32_t i; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; + + qla_printk(KERN_INFO, ha, + "FW: Loading from flash (%x)...\n", ha->flt_region_fw); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4007,8 +4029,8 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } -int -qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +static int +qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr) { int rval; int segments, fragment; @@ -4028,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) qla_printk(KERN_ERR, ha, "Firmware images can be retrieved " "from: " QLA_FW_URL ".\n"); - /* Try to load RISC code from flash. */ - qla_printk(KERN_ERR, ha, "Attempting to load (potentially " - "outdated) firmware from flash.\n"); - return qla24xx_load_risc_flash(vha, srisc_addr); + return QLA_FUNCTION_FAILED; } + qla_printk(KERN_INFO, ha, + "FW: Loading via request-firmware...\n"); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4118,6 +4140,40 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } +int +qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware via request-firmware interface (.bin file). + * 2) Firmware residing in flash. + */ + rval = qla24xx_load_risc_blob(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_flash(vha, srisc_addr); +} + +int +qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware residing in flash. + * 2) Firmware via request-firmware interface (.bin file). + */ + rval = qla24xx_load_risc_flash(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_blob(vha, srisc_addr); +} + void qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) { @@ -4150,8 +4206,8 @@ qla24xx_configure_vhba(scsi_qla_host_t *vha) uint16_t mb[MAILBOX_REGISTER_COUNT]; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); - struct req_que *req = ha->req_q_map[0]; - struct rsp_que *rsp = ha->rsp_q_map[0]; + struct req_que *req = ha->req_q_map[vha->req_ques[0]]; + struct rsp_que *rsp = req->rsp; if (!vha->vp_idx) return -EINVAL; @@ -4255,3 +4311,269 @@ qla84xx_init_chip(scsi_qla_host_t *vha) return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED: QLA_SUCCESS; } + +/* 81XX Support **************************************************************/ + +int +qla81xx_nvram_config(scsi_qla_host_t *vha) +{ + int rval; + struct init_cb_81xx *icb; + struct nvram_81xx *nv; + uint32_t *dptr; + uint8_t *dptr1, *dptr2; + uint32_t chksum; + uint16_t cnt; + struct qla_hw_data *ha = vha->hw; + + rval = QLA_SUCCESS; + icb = (struct init_cb_81xx *)ha->init_cb; + nv = ha->nvram; + + /* Determine NVRAM starting address. */ + ha->nvram_size = sizeof(struct nvram_81xx); + ha->nvram_base = FA_NVRAM_FUNC0_ADDR; + ha->vpd_size = FA_NVRAM_VPD_SIZE; + ha->vpd_base = FA_NVRAM_VPD0_ADDR; + if (PCI_FUNC(ha->pdev->devfn) & 1) { + ha->nvram_base = FA_NVRAM_FUNC1_ADDR; + ha->vpd_base = FA_NVRAM_VPD1_ADDR; + } + + /* Get VPD data into cache */ + ha->vpd = ha->nvram + VPD_OFFSET; + ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd, + ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4); + + /* Get NVRAM data into cache and calculate checksum. */ + dptr = (uint32_t *)nv; + ha->isp_ops->read_nvram(vha, (uint8_t *)dptr, ha->nvram_base, + ha->nvram_size); + for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++) + chksum += le32_to_cpu(*dptr++); + + DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no)); + DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size)); + + /* Bad NVRAM data, set defaults parameters. */ + if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P' + || nv->id[3] != ' ' || + nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) { + /* Reset NVRAM data. */ + qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: " + "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0], + le16_to_cpu(nv->nvram_version)); + qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet " + "invalid -- WWPN) defaults.\n"); + + /* + * Set default initialization control block. + */ + memset(nv, 0, ha->nvram_size); + nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION); + nv->version = __constant_cpu_to_le16(ICB_VERSION); + nv->frame_payload_size = __constant_cpu_to_le16(2048); + nv->execution_throttle = __constant_cpu_to_le16(0xFFFF); + nv->exchange_count = __constant_cpu_to_le16(0); + nv->port_name[0] = 0x21; + nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn); + nv->port_name[2] = 0x00; + nv->port_name[3] = 0xe0; + nv->port_name[4] = 0x8b; + nv->port_name[5] = 0x1c; + nv->port_name[6] = 0x55; + nv->port_name[7] = 0x86; + nv->node_name[0] = 0x20; + nv->node_name[1] = 0x00; + nv->node_name[2] = 0x00; + nv->node_name[3] = 0xe0; + nv->node_name[4] = 0x8b; + nv->node_name[5] = 0x1c; + nv->node_name[6] = 0x55; + nv->node_name[7] = 0x86; + nv->login_retry_count = __constant_cpu_to_le16(8); + nv->interrupt_delay_timer = __constant_cpu_to_le16(0); + nv->login_timeout = __constant_cpu_to_le16(0); + nv->firmware_options_1 = + __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1); + nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4); + nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12); + nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13); + nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10); + nv->efi_parameters = __constant_cpu_to_le32(0); + nv->reset_delay = 5; + nv->max_luns_per_target = __constant_cpu_to_le16(128); + nv->port_down_retry_count = __constant_cpu_to_le16(30); + nv->link_down_timeout = __constant_cpu_to_le16(30); + nv->enode_mac[0] = 0x01; + nv->enode_mac[1] = 0x02; + nv->enode_mac[2] = 0x03; + nv->enode_mac[3] = 0x04; + nv->enode_mac[4] = 0x05; + nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn); + + rval = 1; + } + + /* Reset Initialization control block */ + memset(icb, 0, sizeof(struct init_cb_81xx)); + + /* Copy 1st segment. */ + dptr1 = (uint8_t *)icb; + dptr2 = (uint8_t *)&nv->version; + cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version; + while (cnt--) + *dptr1++ = *dptr2++; + + icb->login_retry_count = nv->login_retry_count; + + /* Copy 2nd segment. */ + dptr1 = (uint8_t *)&icb->interrupt_delay_timer; + dptr2 = (uint8_t *)&nv->interrupt_delay_timer; + cnt = (uint8_t *)&icb->reserved_5 - + (uint8_t *)&icb->interrupt_delay_timer; + while (cnt--) + *dptr1++ = *dptr2++; + + memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac)); + /* Some boards (with valid NVRAMs) still have NULL enode_mac!! */ + if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) { + icb->enode_mac[0] = 0x01; + icb->enode_mac[1] = 0x02; + icb->enode_mac[2] = 0x03; + icb->enode_mac[3] = 0x04; + icb->enode_mac[4] = 0x05; + icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn); + } + + /* + * Setup driver NVRAM options. + */ + qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name), + "QLE81XX"); + + /* Use alternate WWN? */ + if (nv->host_p & __constant_cpu_to_le32(BIT_15)) { + memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE); + memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE); + } + + /* Prepare nodename */ + if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) { + /* + * Firmware will apply the following mask if the nodename was + * not provided. + */ + memcpy(icb->node_name, icb->port_name, WWN_SIZE); + icb->node_name[0] &= 0xF0; + } + + /* Set host adapter parameters. */ + ha->flags.disable_risc_code_load = 0; + ha->flags.enable_lip_reset = 0; + ha->flags.enable_lip_full_login = + le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0; + ha->flags.enable_target_reset = + le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0; + ha->flags.enable_led_scheme = 0; + ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0; + + ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) & + (BIT_6 | BIT_5 | BIT_4)) >> 4; + + /* save HBA serial number */ + ha->serial0 = icb->port_name[5]; + ha->serial1 = icb->port_name[6]; + ha->serial2 = icb->port_name[7]; + memcpy(vha->node_name, icb->node_name, WWN_SIZE); + memcpy(vha->port_name, icb->port_name, WWN_SIZE); + + icb->execution_throttle = __constant_cpu_to_le16(0xFFFF); + + ha->retry_count = le16_to_cpu(nv->login_retry_count); + + /* Set minimum login_timeout to 4 seconds. */ + if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout) + nv->login_timeout = cpu_to_le16(ql2xlogintimeout); + if (le16_to_cpu(nv->login_timeout) < 4) + nv->login_timeout = __constant_cpu_to_le16(4); + ha->login_timeout = le16_to_cpu(nv->login_timeout); + icb->login_timeout = nv->login_timeout; + + /* Set minimum RATOV to 100 tenths of a second. */ + ha->r_a_tov = 100; + + ha->loop_reset_delay = nv->reset_delay; + + /* Link Down Timeout = 0: + * + * When Port Down timer expires we will start returning + * I/O's to OS with "DID_NO_CONNECT". + * + * Link Down Timeout != 0: + * + * The driver waits for the link to come up after link down + * before returning I/Os to OS with "DID_NO_CONNECT". + */ + if (le16_to_cpu(nv->link_down_timeout) == 0) { + ha->loop_down_abort_time = + (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); + } else { + ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout); + ha->loop_down_abort_time = + (LOOP_DOWN_TIME - ha->link_down_timeout); + } + + /* Need enough time to try and get the port back. */ + ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count); + if (qlport_down_retry) + ha->port_down_retry_count = qlport_down_retry; + + /* Set login_retry_count */ + ha->login_retry_count = le16_to_cpu(nv->login_retry_count); + if (ha->port_down_retry_count == + le16_to_cpu(nv->port_down_retry_count) && + ha->port_down_retry_count > 3) + ha->login_retry_count = ha->port_down_retry_count; + else if (ha->port_down_retry_count > (int)ha->login_retry_count) + ha->login_retry_count = ha->port_down_retry_count; + if (ql2xloginretrycount) + ha->login_retry_count = ql2xloginretrycount; + + /* Enable ZIO. */ + if (!vha->flags.init_done) { + ha->zio_mode = le32_to_cpu(icb->firmware_options_2) & + (BIT_3 | BIT_2 | BIT_1 | BIT_0); + ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ? + le16_to_cpu(icb->interrupt_delay_timer): 2; + } + icb->firmware_options_2 &= __constant_cpu_to_le32( + ~(BIT_3 | BIT_2 | BIT_1 | BIT_0)); + vha->flags.process_response_queue = 0; + if (ha->zio_mode != QLA_ZIO_DISABLED) { + ha->zio_mode = QLA_ZIO_MODE_6; + + DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay " + "(%d us).\n", vha->host_no, ha->zio_mode, + ha->zio_timer * 100)); + qla_printk(KERN_INFO, ha, + "ZIO mode %d enabled; timer delay (%d us).\n", + ha->zio_mode, ha->zio_timer * 100); + + icb->firmware_options_2 |= cpu_to_le32( + (uint32_t)ha->zio_mode); + icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer); + vha->flags.process_response_queue = 1; + } + + if (rval) { + DEBUG2_3(printk(KERN_WARNING + "scsi(%ld): NVRAM configuration failed!\n", vha->host_no)); + } + return (rval); +} + +void +qla81xx_update_fw_options(scsi_qla_host_t *ha) +{ +} |