1 files changed, 38 insertions, 28 deletions

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 208607be78c7..cbe0cad83b68 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -95,6 +95,8 @@ MODULE_PARM_DESC(ql2xqfullrampup,
  */
 static int qla2xxx_slave_configure(struct scsi_device * device);
 static int qla2xxx_slave_alloc(struct scsi_device *);
+static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
+static void qla2xxx_scan_start(struct Scsi_Host *);
 static void qla2xxx_slave_destroy(struct scsi_device *);
 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
 		void (*fn)(struct scsi_cmnd *));
@@ -124,6 +126,8 @@ static struct scsi_host_template qla2x00_driver_template = {
 
 	.slave_alloc		= qla2xxx_slave_alloc,
 	.slave_destroy		= qla2xxx_slave_destroy,
+	.scan_finished		= qla2xxx_scan_finished,
+	.scan_start		= qla2xxx_scan_start,
 	.change_queue_depth	= qla2x00_change_queue_depth,
 	.change_queue_type	= qla2x00_change_queue_type,
 	.this_id		= -1,
@@ -287,7 +291,7 @@ qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
 	return str;
 }
 
-char *
+static char *
 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
 {
 	char un_str[10];
@@ -325,7 +329,7 @@ qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
 	return (str);
 }
 
-char *
+static char *
 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
 {
 	sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
@@ -634,7 +638,7 @@ qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
 * Note:
 *    Only return FAILED if command not returned by firmware.
 **************************************************************************/
-int
+static int
 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -771,7 +775,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 *
 **************************************************************************/
-int
+static int
 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -902,7 +906,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 *
 **************************************************************************/
-int
+static int
 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -963,7 +967,7 @@ eh_bus_reset_done:
 *
 * Note:
 **************************************************************************/
-int
+static int
 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -1366,6 +1370,29 @@ qla24xx_disable_intrs(scsi_qla_host_t *ha)
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
 
+static void
+qla2xxx_scan_start(struct Scsi_Host *shost)
+{
+	scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
+
+	set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
+	set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
+	set_bit(RSCN_UPDATE, &ha->dpc_flags);
+}
+
+static int
+qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
+
+	if (!ha->host)
+		return 1;
+	if (time > ha->loop_reset_delay * HZ)
+		return 1;
+
+	return atomic_read(&ha->loop_state) == LOOP_READY;
+}
+
 /*
  * PCI driver interface
  */
@@ -1377,10 +1404,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct Scsi_Host *host;
 	scsi_qla_host_t *ha;
 	unsigned long	flags = 0;
-	unsigned long	wait_switch = 0;
 	char pci_info[20];
 	char fw_str[30];
-	fc_port_t *fcport;
 	struct scsi_host_template *sht;
 
 	if (pci_enable_device(pdev))
@@ -1631,30 +1656,19 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ha->isp_ops.enable_intrs(ha);
 
-	/* v2.19.5b6 */
-	/*
-	 * Wait around max loop_reset_delay secs for the devices to come
-	 * on-line. We don't want Linux scanning before we are ready.
-	 *
-	 */
-	for (wait_switch = jiffies + (ha->loop_reset_delay * HZ);
-	    time_before(jiffies,wait_switch) &&
-	     !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES))
-	     && (ha->device_flags & SWITCH_FOUND) ;) {
-
-		qla2x00_check_fabric_devices(ha);
-
-		msleep(10);
-	}
-
 	pci_set_drvdata(pdev, ha);
+
 	ha->flags.init_done = 1;
+	ha->flags.online = 1;
+
 	num_hosts++;
 
 	ret = scsi_add_host(host, &pdev->dev);
 	if (ret)
 		goto probe_failed;
 
+	scsi_scan_host(host);
+
 	qla2x00_alloc_sysfs_attr(ha);
 
 	qla2x00_init_host_attr(ha);
@@ -1669,10 +1683,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	    ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
 	    ha->isp_ops.fw_version_str(ha, fw_str));
 
-	/* Go with fc_rport registration. */
-	list_for_each_entry(fcport, &ha->fcports, list)
-		qla2x00_reg_remote_port(ha, fcport);
-
 	return 0;
 
 probe_failed: