1 files changed, 136 insertions, 29 deletions

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 41669357b186..209f50e788a1 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -78,21 +78,6 @@ module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xmaxqdepth,
 		"Maximum queue depth to report for target devices.");
 
-int ql2xqfulltracking = 1;
-module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xqfulltracking,
-		"Controls whether the driver tracks queue full status "
-		"returns and dynamically adjusts a scsi device's queue "
-		"depth.  Default is 1, perform tracking.  Set to 0 to "
-		"disable dynamic tracking and adjustment of queue depth.");
-
-int ql2xqfullrampup = 120;
-module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xqfullrampup,
-		"Number of seconds to wait to begin to ramp-up the queue "
-		"depth for a device after a queue-full condition has been "
-		"detected.  Default is 120 seconds.");
-
 int ql2xiidmaenable=1;
 module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xiidmaenable,
@@ -490,11 +475,11 @@ qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	srb_t *sp;
 	int rval;
 
-	if (unlikely(pci_channel_offline(ha->pdev))) {
-		if (ha->pdev->error_state == pci_channel_io_frozen)
-			cmd->result = DID_REQUEUE << 16;
-		else
+	if (ha->flags.eeh_busy) {
+		if (ha->flags.pci_channel_io_perm_failure)
 			cmd->result = DID_NO_CONNECT << 16;
+		else
+			cmd->result = DID_REQUEUE << 16;
 		goto qc24_fail_command;
 	}
 
@@ -567,8 +552,15 @@ qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd)
 #define ABORT_POLLING_PERIOD	1000
 #define ABORT_WAIT_ITER		((10 * 1000) / (ABORT_POLLING_PERIOD))
 	unsigned long wait_iter = ABORT_WAIT_ITER;
+	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+	struct qla_hw_data *ha = vha->hw;
 	int ret = QLA_SUCCESS;
 
+	if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
+		DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n"));
+		return ret;
+	}
+
 	while (CMD_SP(cmd) && wait_iter--) {
 		msleep(ABORT_POLLING_PERIOD);
 	}
@@ -1217,13 +1209,61 @@ qla2xxx_slave_destroy(struct scsi_device *sdev)
 	sdev->hostdata = NULL;
 }
 
+static void qla2x00_handle_queue_full(struct scsi_device *sdev, int qdepth)
+{
+	fc_port_t *fcport = (struct fc_port *) sdev->hostdata;
+
+	if (!scsi_track_queue_full(sdev, qdepth))
+		return;
+
+	DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw,
+		"scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n",
+		fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
+		sdev->queue_depth));
+}
+
+static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth)
+{
+	fc_port_t *fcport = sdev->hostdata;
+	struct scsi_qla_host *vha = fcport->vha;
+	struct qla_hw_data *ha = vha->hw;
+	struct req_que *req = NULL;
+
+	req = vha->req;
+	if (!req)
+		return;
+
+	if (req->max_q_depth <= sdev->queue_depth || req->max_q_depth < qdepth)
+		return;
+
+	if (sdev->ordered_tags)
+		scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, qdepth);
+	else
+		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth);
+
+	DEBUG2(qla_printk(KERN_INFO, ha,
+	       "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n",
+	       fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
+	       sdev->queue_depth));
+}
+
 static int
 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
 {
-	if (reason != SCSI_QDEPTH_DEFAULT)
-		return -EOPNOTSUPP;
+	switch (reason) {
+	case SCSI_QDEPTH_DEFAULT:
+		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+		break;
+	case SCSI_QDEPTH_QFULL:
+		qla2x00_handle_queue_full(sdev, qdepth);
+		break;
+	case SCSI_QDEPTH_RAMP_UP:
+		qla2x00_adjust_sdev_qdepth_up(sdev, qdepth);
+		break;
+	default:
+		return EOPNOTSUPP;
+	}
 
-	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
 	return sdev->queue_depth;
 }
 
@@ -1777,6 +1817,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Set ISP-type information. */
 	qla2x00_set_isp_flags(ha);
+
+	/* Set EEH reset type to fundamental if required by hba */
+	if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) {
+		pdev->needs_freset = 1;
+		pci_save_state(pdev);
+	}
+
 	/* Configure PCI I/O space */
 	ret = qla2x00_iospace_config(ha);
 	if (ret)
@@ -2003,13 +2050,13 @@ skip_dpc:
 	DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
 	    base_vha->host_no, ha));
 
-	base_vha->flags.init_done = 1;
-	base_vha->flags.online = 1;
-
 	ret = scsi_add_host(host, &pdev->dev);
 	if (ret)
 		goto probe_failed;
 
+	base_vha->flags.init_done = 1;
+	base_vha->flags.online = 1;
+
 	ha->isp_ops->enable_intrs(ha);
 
 	scsi_scan_host(host);
@@ -2141,6 +2188,24 @@ qla2x00_free_device(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
 
+	qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
+
+	/* Disable timer */
+	if (vha->timer_active)
+		qla2x00_stop_timer(vha);
+
+	/* Kill the kernel thread for this host */
+	if (ha->dpc_thread) {
+		struct task_struct *t = ha->dpc_thread;
+
+		/*
+		 * qla2xxx_wake_dpc checks for ->dpc_thread
+		 * so we need to zero it out.
+		 */
+		ha->dpc_thread = NULL;
+		kthread_stop(t);
+	}
+
 	qla25xx_delete_queues(vha);
 
 	if (ha->flags.fce_enabled)
@@ -2152,6 +2217,8 @@ qla2x00_free_device(scsi_qla_host_t *vha)
 	/* Stop currently executing firmware. */
 	qla2x00_try_to_stop_firmware(vha);
 
+	vha->flags.online = 0;
+
 	/* turn-off interrupts on the card */
 	if (ha->interrupts_on)
 		ha->isp_ops->disable_intrs(ha);
@@ -2826,6 +2893,13 @@ qla2x00_do_dpc(void *data)
 		if (!base_vha->flags.init_done)
 			continue;
 
+		if (ha->flags.eeh_busy) {
+			DEBUG17(qla_printk(KERN_WARNING, ha,
+			    "qla2x00_do_dpc: dpc_flags: %lx\n",
+			    base_vha->dpc_flags));
+			continue;
+		}
+
 		DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
 
 		ha->dpc_active = 1;
@@ -3016,8 +3090,13 @@ qla2x00_timer(scsi_qla_host_t *vha)
 	int		index;
 	srb_t		*sp;
 	int		t;
+	uint16_t        w;
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req;
+
+	/* Hardware read to raise pending EEH errors during mailbox waits. */
+	if (!pci_channel_offline(ha->pdev))
+		pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
 	/*
 	 * Ports - Port down timer.
 	 *
@@ -3219,16 +3298,23 @@ qla2x00_release_firmware(void)
 static pci_ers_result_t
 qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 {
-	scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
+	scsi_qla_host_t *vha = pci_get_drvdata(pdev);
+	struct qla_hw_data *ha = vha->hw;
+
+	DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n",
+	    state));
 
 	switch (state) {
 	case pci_channel_io_normal:
+		ha->flags.eeh_busy = 0;
 		return PCI_ERS_RESULT_CAN_RECOVER;
 	case pci_channel_io_frozen:
+		ha->flags.eeh_busy = 1;
 		pci_disable_device(pdev);
 		return PCI_ERS_RESULT_NEED_RESET;
 	case pci_channel_io_perm_failure:
-		qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
+		ha->flags.pci_channel_io_perm_failure = 1;
+		qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 	return PCI_ERS_RESULT_NEED_RESET;
@@ -3279,6 +3365,8 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev)
 	struct qla_hw_data *ha = base_vha->hw;
 	int rc;
 
+	DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n"));
+
 	if (ha->mem_only)
 		rc = pci_enable_device_mem(pdev);
 	else
@@ -3287,19 +3375,33 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev)
 	if (rc) {
 		qla_printk(KERN_WARNING, ha,
 		    "Can't re-enable PCI device after reset.\n");
-
 		return ret;
 	}
-	pci_set_master(pdev);
 
 	if (ha->isp_ops->pci_config(base_vha))
 		return ret;
 
+#ifdef QL_DEBUG_LEVEL_17
+	{
+		uint8_t b;
+		uint32_t i;
+
+		printk("slot_reset_1: ");
+		for (i = 0; i < 256; i++) {
+			pci_read_config_byte(ha->pdev, i, &b);
+			printk("%s%02x", (i%16) ? " " : "\n", b);
+		}
+		printk("\n");
+	}
+#endif
 	set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
 	if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
 		ret =  PCI_ERS_RESULT_RECOVERED;
 	clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
 
+	DEBUG17(qla_printk(KERN_WARNING, ha,
+	    "slot_reset-return:ret=%x\n", ret));
+
 	return ret;
 }
 
@@ -3310,12 +3412,17 @@ qla2xxx_pci_resume(struct pci_dev *pdev)
 	struct qla_hw_data *ha = base_vha->hw;
 	int ret;
 
+	DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n"));
+
 	ret = qla2x00_wait_for_hba_online(base_vha);
 	if (ret != QLA_SUCCESS) {
 		qla_printk(KERN_ERR, ha,
 		    "the device failed to resume I/O "
 		    "from slot/link_reset");
 	}
+
+	ha->flags.eeh_busy = 0;
+
 	pci_cleanup_aer_uncorrect_error_status(pdev);
 }