diff options
Diffstat (limited to 'drivers/scsi/qla4xxx')
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_def.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_fw.h | 1 | ||||
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_glbl.h | 3 | ||||
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_isr.c | 6 | ||||
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_mbx.c | 53 | ||||
| -rw-r--r-- | drivers/scsi/qla4xxx/ql4_os.c | 68 |
6 files changed, 124 insertions, 9 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index b6f2d0152454..428802616e33 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -172,7 +172,7 @@ struct srb { struct scsi_cmnd *cmd; /* (4) SCSI command block */ dma_addr_t dma_handle; /* (4) for unmap of single transfers */ - atomic_t ref_count; /* reference count for this srb */ + struct kref srb_ref; /* reference count for this srb */ uint32_t fw_ddb_index; uint8_t err_id; /* error id */ #define SRB_ERR_PORT 1 /* Request failed because "port down" */ diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index dfe7b4dd3912..855226e08665 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -215,6 +215,7 @@ union external_hw_config_reg { /* Mailbox command definitions */ #define MBOX_CMD_ABOUT_FW 0x0009 #define MBOX_CMD_PING 0x000B +#define MBOX_CMD_ABORT_TASK 0x0015 #define MBOX_CMD_LUN_RESET 0x0016 #define MBOX_CMD_TARGET_WARM_RESET 0x0017 #define MBOX_CMD_GET_MANAGEMENT_DATA 0x001E diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 987658f5bc13..c4636f6cb3cb 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -25,6 +25,7 @@ void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen); int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha); int qla4xxx_relogin_device(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry); +int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb); int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry, int lun); int qla4xxx_reset_target(struct scsi_qla_host * ha, @@ -65,7 +66,7 @@ void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha, int qla4xxx_init_rings(struct scsi_qla_host * ha); struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index); -void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb); +void qla4xxx_srb_compl(struct kref *ref); int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host * ha); int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, uint32_t state, uint32_t conn_error); diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index ce5838eb685e..596c3031483c 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -97,7 +97,7 @@ qla4xxx_status_cont_entry(struct scsi_qla_host *ha, /* Place command on done queue. */ if (srb->req_sense_len == 0) { - qla4xxx_srb_compl(ha, srb); + kref_put(&srb->srb_ref, qla4xxx_srb_compl); ha->status_srb = NULL; } } @@ -329,7 +329,7 @@ status_entry_exit: /* complete the request, if not waiting for status_continuation pkt */ srb->cc_stat = sts_entry->completionStatus; if (ha->status_srb == NULL) - qla4xxx_srb_compl(ha, srb); + kref_put(&srb->srb_ref, qla4xxx_srb_compl); } /** @@ -393,7 +393,7 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha) /* ETRY normally by sending it back with * DID_BUS_BUSY */ srb->cmd->result = DID_BUS_BUSY << 16; - qla4xxx_srb_compl(ha, srb); + kref_put(&srb->srb_ref, qla4xxx_srb_compl); break; case ET_CONTINUE: diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 43581ce3a1b6..e1315cd8c261 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -762,6 +762,59 @@ exit_get_event_log: } /** + * qla4xxx_abort_task - issues Abort Task + * @ha: Pointer to host adapter structure. + * @srb: Pointer to srb entry + * + * This routine performs a LUN RESET on the specified target/lun. + * The caller must ensure that the ddb_entry and lun_entry pointers + * are valid before calling this routine. + **/ +int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb) +{ + uint32_t mbox_cmd[MBOX_REG_COUNT]; + uint32_t mbox_sts[MBOX_REG_COUNT]; + struct scsi_cmnd *cmd = srb->cmd; + int status = QLA_SUCCESS; + unsigned long flags = 0; + uint32_t index; + + /* + * Send abort task command to ISP, so that the ISP will return + * request with ABORT status + */ + memset(&mbox_cmd, 0, sizeof(mbox_cmd)); + memset(&mbox_sts, 0, sizeof(mbox_sts)); + + spin_lock_irqsave(&ha->hardware_lock, flags); + index = (unsigned long)(unsigned char *)cmd->host_scribble; + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Firmware already posted completion on response queue */ + if (index == MAX_SRBS) + return status; + + mbox_cmd[0] = MBOX_CMD_ABORT_TASK; + mbox_cmd[1] = srb->fw_ddb_index; + mbox_cmd[2] = index; + /* Immediate Command Enable */ + mbox_cmd[5] = 0x01; + + qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], + &mbox_sts[0]); + if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE) { + status = QLA_ERROR; + + DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%d: abort task FAILED: " + "mbx0=%04X, mb1=%04X, mb2=%04X, mb3=%04X, mb4=%04X\n", + ha->host_no, cmd->device->id, cmd->device->lun, mbox_sts[0], + mbox_sts[1], mbox_sts[2], mbox_sts[3], mbox_sts[4])); + } + + return status; +} + +/** * qla4xxx_reset_lun - issues LUN Reset * @ha: Pointer to host adapter structure. * @db_entry: Pointer to device database entry diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 2ca43f0ebcd6..38b1d38afca5 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -74,6 +74,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc); */ static int qla4xxx_queuecommand(struct scsi_cmnd *cmd, void (*done) (struct scsi_cmnd *)); +static int qla4xxx_eh_abort(struct scsi_cmnd *cmd); static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd); static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd); static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd); @@ -88,6 +89,7 @@ static struct scsi_host_template qla4xxx_driver_template = { .proc_name = DRIVER_NAME, .queuecommand = qla4xxx_queuecommand, + .eh_abort_handler = qla4xxx_eh_abort, .eh_device_reset_handler = qla4xxx_eh_device_reset, .eh_target_reset_handler = qla4xxx_eh_target_reset, .eh_host_reset_handler = qla4xxx_eh_host_reset, @@ -384,7 +386,7 @@ static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, if (!srb) return srb; - atomic_set(&srb->ref_count, 1); + kref_init(&srb->srb_ref); srb->ha = ha; srb->ddb = ddb_entry; srb->cmd = cmd; @@ -406,9 +408,11 @@ static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb) CMD_SP(cmd) = NULL; } -void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb) +void qla4xxx_srb_compl(struct kref *ref) { + struct srb *srb = container_of(ref, struct srb, srb_ref); struct scsi_cmnd *cmd = srb->cmd; + struct scsi_qla_host *ha = srb->ha; qla4xxx_srb_free_dma(ha, srb); @@ -887,7 +891,7 @@ static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha) srb = qla4xxx_del_from_active_array(ha, i); if (srb != NULL) { srb->cmd->result = DID_RESET << 16; - qla4xxx_srb_compl(ha, srb); + kref_put(&srb->srb_ref, qla4xxx_srb_compl); } } spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -1501,7 +1505,7 @@ struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t in /** * qla4xxx_eh_wait_on_command - waits for command to be returned by firmware - * @ha: actual ha whose done queue will contain the comd returned by firmware. + * @ha: Pointer to host adapter structure. * @cmd: Scsi Command to wait on. * * This routine waits for the command to be returned by the Firmware @@ -1585,6 +1589,62 @@ static int qla4xxx_eh_wait_for_commands(struct scsi_qla_host *ha, } /** + * qla4xxx_eh_abort - callback for abort task. + * @cmd: Pointer to Linux's SCSI command structure + * + * This routine is called by the Linux OS to abort the specified + * command. + **/ +static int qla4xxx_eh_abort(struct scsi_cmnd *cmd) +{ + struct scsi_qla_host *ha = to_qla_host(cmd->device->host); + unsigned int id = cmd->device->id; + unsigned int lun = cmd->device->lun; + unsigned long serial = cmd->serial_number; + struct srb *srb = NULL; + int ret = SUCCESS; + int wait = 0; + + dev_info(&ha->pdev->dev, + "scsi%ld:%d:%d: Abort command issued cmd=%p, pid=%ld\n", + ha->host_no, id, lun, cmd, serial); + + srb = (struct srb *) CMD_SP(cmd); + + if (!srb) + return SUCCESS; + + kref_get(&srb->srb_ref); + + if (qla4xxx_abort_task(ha, srb) != QLA_SUCCESS) { + DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx failed.\n", + ha->host_no, id, lun)); + ret = FAILED; + } else { + DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx success.\n", + ha->host_no, id, lun)); + wait = 1; + } + + kref_put(&srb->srb_ref, qla4xxx_srb_compl); + + /* Wait for command to complete */ + if (wait) { + if (!qla4xxx_eh_wait_on_command(ha, cmd)) { + DEBUG2(printk("scsi%ld:%d:%d: Abort handler timed out\n", + ha->host_no, id, lun)); + ret = FAILED; + } + } + + dev_info(&ha->pdev->dev, + "scsi%ld:%d:%d: Abort command - %s\n", + ha->host_no, id, lun, (ret == SUCCESS) ? "succeded" : "failed"); + + return ret; +} + +/** * qla4xxx_eh_device_reset - callback for target reset. * @cmd: Pointer to Linux's SCSI command structure * |