diff options
Diffstat (limited to 'drivers/scsi/snic/snic_fwint.h')
| -rw-r--r-- | drivers/scsi/snic/snic_fwint.h | 525 |
1 files changed, 525 insertions, 0 deletions
diff --git a/drivers/scsi/snic/snic_fwint.h b/drivers/scsi/snic/snic_fwint.h new file mode 100644 index 000000000000..2cfaf2dc915f --- /dev/null +++ b/drivers/scsi/snic/snic_fwint.h @@ -0,0 +1,525 @@ +/* + * Copyright 2014 Cisco Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __SNIC_FWINT_H +#define __SNIC_FWINT_H + +#define SNIC_CDB_LEN 32 /* SCSI CDB size 32, can be used for 16 bytes */ +#define LUN_ADDR_LEN 8 + +/* + * Command entry type + */ +enum snic_io_type { + /* + * Initiator request types + */ + SNIC_REQ_REPORT_TGTS = 0x2, /* Report Targets */ + SNIC_REQ_ICMND, /* Initiator command for SCSI IO */ + SNIC_REQ_ITMF, /* Initiator command for Task Mgmt */ + SNIC_REQ_HBA_RESET, /* SNIC Reset */ + SNIC_REQ_EXCH_VER, /* Exchange Version Information */ + SNIC_REQ_TGT_INFO, /* Backend/Target Information */ + SNIC_REQ_BOOT_LUNS, + + /* + * Response type + */ + SNIC_RSP_REPORT_TGTS_CMPL = 0x12,/* Report Targets Completion */ + SNIC_RSP_ICMND_CMPL, /* SCSI IO Completion */ + SNIC_RSP_ITMF_CMPL, /* Task Management Completion */ + SNIC_RSP_HBA_RESET_CMPL, /* SNIC Reset Completion */ + SNIC_RSP_EXCH_VER_CMPL, /* Exchange Version Completion*/ + SNIC_RSP_BOOT_LUNS_CMPL, + + /* + * Misc Request types + */ + SNIC_MSG_ACK = 0x80, /* Ack: snic_notify_msg */ + SNIC_MSG_ASYNC_EVNOTIFY, /* Asynchronous Event Notification */ +}; /* end of enum snic_io_type */ + + +/* + * Header status codes from firmware + */ +enum snic_io_status { + SNIC_STAT_IO_SUCCESS = 0, /* request was successful */ + + /* + * If a request to the fw is rejected, the original request header + * will be returned with the status set to one of the following: + */ + SNIC_STAT_INVALID_HDR, /* header contains invalid data */ + SNIC_STAT_OUT_OF_RES, /* out of resources to complete request */ + SNIC_STAT_INVALID_PARM, /* some parameter in request is not valid */ + SNIC_STAT_REQ_NOT_SUP, /* req type is not supported */ + SNIC_STAT_IO_NOT_FOUND, /* requested IO was not found */ + + /* + * Once a request is processed, the fw will usually return + * a cmpl message type. In cases where errors occurred, + * the header status would be filled in with one of the following: + */ + SNIC_STAT_ABORTED, /* req was aborted */ + SNIC_STAT_TIMEOUT, /* req was timed out */ + SNIC_STAT_SGL_INVALID, /* req was aborted due to sgl error */ + SNIC_STAT_DATA_CNT_MISMATCH, /*recv/sent more/less data than expec */ + SNIC_STAT_FW_ERR, /* req was terminated due to fw error */ + SNIC_STAT_ITMF_REJECT, /* itmf req was rejected by target */ + SNIC_STAT_ITMF_FAIL, /* itmf req was failed */ + SNIC_STAT_ITMF_INCORRECT_LUN, /* itmf req has incorrect LUN id*/ + SNIC_STAT_CMND_REJECT, /* req was invalid and rejected */ + SNIC_STAT_DEV_OFFLINE, /* req sent to offline device */ + SNIC_STAT_NO_BOOTLUN, + SNIC_STAT_SCSI_ERR, /* SCSI error returned by Target. */ + SNIC_STAT_NOT_READY, /* sNIC Subsystem is not ready */ + SNIC_STAT_FATAL_ERROR, /* sNIC is in unrecoverable state */ +}; /* end of enum snic_io_status */ + +/* + * snic_io_hdr : host <--> firmare + * + * for any other message that will be queued to firmware should + * have the following request header + */ +struct snic_io_hdr { + __le32 hid; + __le32 cmnd_id; /* tag here */ + ulong init_ctx; /* initiator context */ + u8 type; /* request/response type */ + u8 status; /* header status entry */ + u8 protocol; /* Protocol specific, may needed for RoCE*/ + u8 flags; + __le16 sg_cnt; + u16 resvd; +}; + +/* auxillary funciton for encoding the snic_io_hdr */ +static inline void +snic_io_hdr_enc(struct snic_io_hdr *hdr, u8 typ, u8 status, u32 id, u32 hid, + u16 sg_cnt, ulong ctx) +{ + hdr->type = typ; + hdr->status = status; + hdr->protocol = 0; + hdr->hid = cpu_to_le32(hid); + hdr->cmnd_id = cpu_to_le32(id); + hdr->sg_cnt = cpu_to_le16(sg_cnt); + hdr->init_ctx = ctx; + hdr->flags = 0; +} + +/* auxillary funciton for decoding the snic_io_hdr */ +static inline void +snic_io_hdr_dec(struct snic_io_hdr *hdr, u8 *typ, u8 *stat, u32 *cmnd_id, + u32 *hid, ulong *ctx) +{ + *typ = hdr->type; + *stat = hdr->status; + *hid = le32_to_cpu(hdr->hid); + *cmnd_id = le32_to_cpu(hdr->cmnd_id); + *ctx = hdr->init_ctx; +} + +/* + * snic_host_info: host -> firmware + * + * Used for sending host information to firmware, and request fw version + */ +struct snic_exch_ver_req { + __le32 drvr_ver; /* for debugging, when fw dump captured */ + __le32 os_type; /* for OS specific features */ +}; + +/* + * os_type flags + * Bit 0-7 : OS information + * Bit 8-31: Feature/Capability Information + */ +#define SNIC_OS_LINUX 0x1 +#define SNIC_OS_WIN 0x2 +#define SNIC_OS_ESX 0x3 + +/* + * HBA Capabilities + * Bit 1: Reserved. + * Bit 2: Dynamic Discovery of LUNs. + * Bit 3: Async event notifications on on tgt online/offline events. + * Bit 4: IO timeout support in FW. + * Bit 5-31: Reserved. + */ +#define SNIC_HBA_CAP_DDL 0x02 /* Supports Dynamic Discovery of LUNs */ +#define SNIC_HBA_CAP_AEN 0x04 /* Supports Async Event Noitifcation */ +#define SNIC_HBA_CAP_TMO 0x08 /* Supports IO timeout in FW */ + +/* + * snic_exch_ver_rsp : firmware -> host + * + * Used by firmware to send response to version request + */ +struct snic_exch_ver_rsp { + __le32 version; + __le32 hid; + __le32 max_concur_ios; /* max concurrent ios */ + __le32 max_sgs_per_cmd; /* max sgls per IO */ + __le32 max_io_sz; /* max io size supported */ + __le32 hba_cap; /* hba capabilities */ + __le32 max_tgts; /* max tgts supported */ + __le16 io_timeout; /* FW extended timeout */ + u16 rsvd; +}; + + +/* + * snic_report_tgts : host -> firmware request + * + * Used by the host to request list of targets + */ +struct snic_report_tgts { + __le16 sg_cnt; + __le16 flags; /* specific flags from fw */ + u8 _resvd[4]; + __le64 sg_addr; /* Points to SGL */ + __le64 sense_addr; +}; + +enum snic_type { + SNIC_NONE = 0x0, + SNIC_DAS, + SNIC_SAN, +}; + + +/* Report Target Response */ +enum snic_tgt_type { + SNIC_TGT_NONE = 0x0, + SNIC_TGT_DAS, /* DAS Target */ + SNIC_TGT_SAN, /* SAN Target */ +}; + +/* target id format */ +struct snic_tgt_id { + __le32 tgt_id; /* target id */ + __le16 tgt_type; /* tgt type */ + __le16 vnic_id; /* corresponding vnic id */ +}; + +/* + * snic_report_tgts_cmpl : firmware -> host response + * + * Used by firmware to send response to Report Targets request + */ +struct snic_report_tgts_cmpl { + __le32 tgt_cnt; /* Number of Targets accessible */ + u32 _resvd; +}; + +/* + * Command flags + * + * Bit 0: Read flags + * Bit 1: Write flag + * Bit 2: ESGL - sg/esg array contains extended sg + * ESGE - is a host buffer contains sg elements + * Bit 3-4: Task Attributes + * 00b - simple + * 01b - head of queue + * 10b - ordered + * Bit 5-7: Priority - future use + * Bit 8-15: Reserved + */ + +#define SNIC_ICMND_WR 0x01 /* write command */ +#define SNIC_ICMND_RD 0x02 /* read command */ +#define SNIC_ICMND_ESGL 0x04 /* SGE/ESGE array contains valid data*/ + +/* + * Priority/Task Attribute settings + */ +#define SNIC_ICMND_TSK_SHIFT 2 /* task attr starts at bit 2 */ +#define SNIC_ICMND_TSK_MASK(x) ((x>>SNIC_ICMND_TSK_SHIFT) & ~(0xffff)) +#define SNIC_ICMND_TSK_SIMPLE 0 /* simple task attr */ +#define SNIC_ICMND_TSK_HEAD_OF_QUEUE 1 /* head of qeuue task attr */ +#define SNIC_ICMND_TSK_ORDERED 2 /* ordered task attr */ + +#define SNIC_ICMND_PRI_SHIFT 5 /* prio val starts at bit 5 */ + +/* + * snic_icmnd : host-> firmware request + * + * used for sending out an initiator SCSI 16/32-byte command + */ +struct snic_icmnd { + __le16 sg_cnt; /* Number of SG Elements */ + __le16 flags; /* flags */ + __le32 sense_len; /* Sense buffer length */ + __le64 tgt_id; /* Destination Target ID */ + __le64 lun_id; /* Destination LUN ID */ + u8 cdb_len; + u8 _resvd; + __le16 time_out; /* ms time for Res allocations fw to handle io*/ + __le32 data_len; /* Total number of bytes to be transferred */ + u8 cdb[SNIC_CDB_LEN]; + __le64 sg_addr; /* Points to SG List */ + __le64 sense_addr; /* Sense buffer address */ +}; + + +/* Response flags */ +/* Bit 0: Under run + * Bit 1: Over Run + * Bit 2-7: Reserved + */ +#define SNIC_ICMND_CMPL_UNDR_RUN 0x01 /* resid under and valid */ +#define SNIC_ICMND_CMPL_OVER_RUN 0x02 /* resid over and valid */ + +/* + * snic_icmnd_cmpl: firmware -> host response + * + * Used for sending the host a response to an icmnd (initiator command) + */ +struct snic_icmnd_cmpl { + u8 scsi_status; /* value as per SAM */ + u8 flags; + __le16 sense_len; /* Sense Length */ + __le32 resid; /* Residue : # bytes under or over run */ +}; + +/* + * snic_itmf: host->firmware request + * + * used for requesting the firmware to abort a request and/or send out + * a task management function + * + * the req_id field is valid in case of abort task and clear task + */ +struct snic_itmf { + u8 tm_type; /* SCSI Task Management request */ + u8 resvd; + __le16 flags; /* flags */ + __le32 req_id; /* Command id of snic req to be aborted */ + __le64 tgt_id; /* Target ID */ + __le64 lun_id; /* Destination LUN ID */ + __le16 timeout; /* in sec */ +}; + +/* + * Task Management Request + */ +enum snic_itmf_tm_type { + SNIC_ITMF_ABTS_TASK = 0x01, /* Abort Task */ + SNIC_ITMF_ABTS_TASK_SET, /* Abort Task Set */ + SNIC_ITMF_CLR_TASK, /* Clear Task */ + SNIC_ITMF_CLR_TASKSET, /* Clear Task Set */ + SNIC_ITMF_LUN_RESET, /* Lun Reset */ + SNIC_ITMF_ABTS_TASK_TERM, /* Supported for SAN Targets */ +}; + +/* + * snic_itmf_cmpl: firmware -> host resposne + * + * used for sending the host a response for a itmf request + */ +struct snic_itmf_cmpl { + __le32 nterminated; /* # IOs terminated as a result of tmf */ + u8 flags; /* flags */ + u8 _resvd[3]; +}; + +/* + * itmfl_cmpl flags + * Bit 0 : 1 - Num terminated field valid + * Bit 1 - 7 : Reserved + */ +#define SNIC_NUM_TERM_VALID 0x01 /* Number of IOs terminated */ + +/* + * snic_hba_reset: host -> firmware request + * + * used for requesting firmware to reset snic + */ +struct snic_hba_reset { + __le16 flags; /* flags */ + u8 _resvd[6]; +}; + +/* + * snic_hba_reset_cmpl: firmware -> host response + * + * Used by firmware to respond to the host's hba reset request + */ +struct snic_hba_reset_cmpl { + u8 flags; /* flags : more info needs to be added*/ + u8 _resvd[7]; +}; + +/* + * snic_notify_msg: firmware -> host response + * + * Used by firmware to notify host of the last work queue entry received + */ +struct snic_notify_msg { + __le32 wqe_num; /* wq entry number */ + u8 flags; /* flags, macros */ + u8 _resvd[4]; +}; + + +#define SNIC_EVDATA_LEN 24 /* in bytes */ +/* snic_async_evnotify: firmware -> host notification + * + * Used by firmware to notify the host about configuration/state changes + */ +struct snic_async_evnotify { + u8 FLS_EVENT_DESC; + u8 vnic; /* vnic id */ + u8 _resvd[2]; + __le32 ev_id; /* Event ID */ + u8 ev_data[SNIC_EVDATA_LEN]; /* Event Data */ + u8 _resvd2[4]; +}; + +/* async event flags */ +enum snic_ev_type { + SNIC_EV_TGT_OFFLINE = 0x01, /* Target Offline, PL contains TGT ID */ + SNIC_EV_TGT_ONLINE, /* Target Online, PL contains TGT ID */ + SNIC_EV_LUN_OFFLINE, /* LUN Offline, PL contains LUN ID */ + SNIC_EV_LUN_ONLINE, /* LUN Online, PL contains LUN ID */ + SNIC_EV_CONF_CHG, /* Dev Config/Attr Change Event */ + SNIC_EV_TGT_ADDED, /* Target Added */ + SNIC_EV_TGT_DELTD, /* Target Del'd, PL contains TGT ID */ + SNIC_EV_LUN_ADDED, /* LUN Added */ + SNIC_EV_LUN_DELTD, /* LUN Del'd, PL cont. TGT & LUN ID */ + + SNIC_EV_DISC_CMPL = 0x10, /* Discovery Completed Event */ +}; + + +#define SNIC_HOST_REQ_LEN 128 /*Exp length of host req, wq desc sz*/ +/* Payload 88 bytes = 128 - 24 - 16 */ +#define SNIC_HOST_REQ_PAYLOAD ((int)(SNIC_HOST_REQ_LEN - \ + sizeof(struct snic_io_hdr) - \ + (2 * sizeof(u64)))) + +/* + * snic_host_req: host -> firmware request + * + * Basic structure for all snic requests that are sent from the host to + * firmware. They are 128 bytes in size. + */ +struct snic_host_req { + u64 ctrl_data[2]; /*16 bytes - Control Data */ + struct snic_io_hdr hdr; + union { + /* + * Entry specific space, last byte contains color + */ + u8 buf[SNIC_HOST_REQ_PAYLOAD]; + + /* + * Exchange firmware version + */ + struct snic_exch_ver_req exch_ver; + + /* report targets */ + struct snic_report_tgts rpt_tgts; + + /* io request */ + struct snic_icmnd icmnd; + + /* task management request */ + struct snic_itmf itmf; + + /* hba reset */ + struct snic_hba_reset reset; + } u; +}; /* end of snic_host_req structure */ + + +#define SNIC_FW_REQ_LEN 64 /* Expected length of fw req */ +struct snic_fw_req { + struct snic_io_hdr hdr; + union { + /* + * Entry specific space, last byte contains color + */ + u8 buf[SNIC_FW_REQ_LEN - sizeof(struct snic_io_hdr)]; + + /* Exchange Version Response */ + struct snic_exch_ver_rsp exch_ver_cmpl; + + /* Report Targets Response */ + struct snic_report_tgts_cmpl rpt_tgts_cmpl; + + /* scsi response */ + struct snic_icmnd_cmpl icmnd_cmpl; + + /* task management response */ + struct snic_itmf_cmpl itmf_cmpl; + + /* hba reset response */ + struct snic_hba_reset_cmpl reset_cmpl; + + /* notify message */ + struct snic_notify_msg ack; + + /* async notification event */ + struct snic_async_evnotify async_ev; + + } u; +}; /* end of snic_fw_req structure */ + +/* + * Auxillary macro to verify specific snic req/cmpl structures + * to ensure that it will be aligned to 64 bit, and not using + * color bit field + */ +#define VERIFY_REQ_SZ(x) +#define VERIFY_CMPL_SZ(x) + +/* + * Access routines to encode and decode the color bit, which is the most + * significant bit of the structure. + */ +static inline void +snic_color_enc(struct snic_fw_req *req, u8 color) +{ + u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1; + + if (color) + *c |= 0x80; + else + *c &= ~0x80; +} + +static inline void +snic_color_dec(struct snic_fw_req *req, u8 *color) +{ + u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1; + + *color = *c >> 7; + + /* Make sure color bit is read from desc *before* other fields + * are read from desc. Hardware guarantees color bit is last + * bit (byte) written. Adding the rmb() prevents the compiler + * and/or CPU from reordering the reads which would potentially + * result in reading stale values. + */ + rmb(); +} +#endif /* end of __SNIC_FWINT_H */ |