summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.c93
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.h14
2 files changed, 104 insertions, 3 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 93230cd1982f..8538c2ddbc68 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -597,6 +597,71 @@ static int mpt3sas_remove_dead_ioc_func(void *arg)
}
/**
+ * _base_sync_drv_fw_timestamp - Sync Drive-Fw TimeStamp.
+ * @ioc: Per Adapter Object
+ *
+ * Return nothing.
+ */
+static void _base_sync_drv_fw_timestamp(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi26IoUnitControlRequest_t *mpi_request;
+ Mpi26IoUnitControlReply_t *mpi_reply;
+ u16 smid;
+ ktime_t current_time;
+ u64 TimeStamp = 0;
+ u8 issue_reset = 0;
+
+ mutex_lock(&ioc->scsih_cmds.mutex);
+ if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+ ioc_err(ioc, "scsih_cmd in use %s\n", __func__);
+ goto out;
+ }
+ ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+ smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+ if (!smid) {
+ ioc_err(ioc, "Failed obtaining a smid %s\n", __func__);
+ ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+ goto out;
+ }
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->scsih_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi26IoUnitControlRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_IO_UNIT_CONTROL;
+ mpi_request->Operation = MPI26_CTRL_OP_SET_IOC_PARAMETER;
+ mpi_request->IOCParameter = MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP;
+ current_time = ktime_get_real();
+ TimeStamp = ktime_to_ms(current_time);
+ mpi_request->Reserved7 = cpu_to_le32(TimeStamp & 0xFFFFFFFF);
+ mpi_request->IOCParameterValue = cpu_to_le32(TimeStamp >> 32);
+ init_completion(&ioc->scsih_cmds.done);
+ ioc->put_smid_default(ioc, smid);
+ dinitprintk(ioc, ioc_info(ioc,
+ "Io Unit Control Sync TimeStamp (sending), @time %lld ms\n",
+ TimeStamp));
+ wait_for_completion_timeout(&ioc->scsih_cmds.done,
+ MPT3SAS_TIMESYNC_TIMEOUT_SECONDS*HZ);
+ if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+ mpt3sas_check_cmd_timeout(ioc,
+ ioc->scsih_cmds.status, mpi_request,
+ sizeof(Mpi2SasIoUnitControlRequest_t)/4, issue_reset);
+ goto issue_host_reset;
+ }
+ if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+ mpi_reply = ioc->scsih_cmds.reply;
+ dinitprintk(ioc, ioc_info(ioc,
+ "Io Unit Control sync timestamp (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
+ le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo)));
+ }
+issue_host_reset:
+ if (issue_reset)
+ mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+out:
+ mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+/**
* _base_fault_reset_work - workq handling ioc fault conditions
* @work: input argument, used to derive ioc
*
@@ -720,7 +785,11 @@ _base_fault_reset_work(struct work_struct *work)
return; /* don't rearm timer */
}
ioc->ioc_coredump_loop = 0;
-
+ if (ioc->time_sync_interval &&
+ ++ioc->timestamp_update_count >= ioc->time_sync_interval) {
+ ioc->timestamp_update_count = 0;
+ _base_sync_drv_fw_timestamp(ioc);
+ }
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
rearm_timer:
if (ioc->fault_reset_work_q)
@@ -744,6 +813,7 @@ mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
if (ioc->fault_reset_work_q)
return;
+ ioc->timestamp_update_count = 0;
/* initialize fault polling */
INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
@@ -4754,7 +4824,24 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
else
ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO;
}
-
+ ioc->time_sync_interval =
+ ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_MASK;
+ if (ioc->time_sync_interval) {
+ if (ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_UNIT_MASK)
+ ioc->time_sync_interval =
+ ioc->time_sync_interval * SECONDS_PER_HOUR;
+ else
+ ioc->time_sync_interval =
+ ioc->time_sync_interval * SECONDS_PER_MIN;
+ dinitprintk(ioc, ioc_info(ioc,
+ "Driver-FW TimeSync interval is %d seconds. ManuPg11 TimeSync Unit is in %s\n",
+ ioc->time_sync_interval, (ioc->manu_pg11.TimeSyncInterval &
+ MPT3SAS_TIMESYNC_UNIT_MASK) ? "Hour" : "Minute"));
+ } else {
+ if (ioc->is_gen35_ioc)
+ ioc_warn(ioc,
+ "TimeSync Interval in Manuf page-11 is not enabled. Periodic Time-Sync will be disabled\n");
+ }
mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
@@ -6466,6 +6553,8 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
r = -EIO;
}
+ /* Reset TimeSync Counter*/
+ ioc->timestamp_update_count = 0;
return r;
}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 7dab579dbc20..cc4815c74f69 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -93,6 +93,14 @@
/* CoreDump: Default timeout */
#define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS (15) /*15 seconds*/
#define MPT3SAS_COREDUMP_LOOP_DONE (0xFF)
+#define MPT3SAS_TIMESYNC_TIMEOUT_SECONDS (10) /* 10 seconds */
+#define MPT3SAS_TIMESYNC_UPDATE_INTERVAL (900) /* 15 minutes */
+#define MPT3SAS_TIMESYNC_UNIT_MASK (0x80) /* bit 7 */
+#define MPT3SAS_TIMESYNC_MASK (0x7F) /* 0 - 6 bits */
+#define SECONDS_PER_MIN (60)
+#define SECONDS_PER_HOUR (3600)
+#define MPT3SAS_COREDUMP_LOOP_DONE (0xFF)
+#define MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP (0x81)
/*
* Set MPT3SAS_SG_DEPTH value based on user input.
@@ -405,7 +413,7 @@ struct Mpi2ManufacturingPage11_t {
u16 HostTraceBufferMaxSizeKB; /* 50h */
u16 HostTraceBufferMinSizeKB; /* 52h */
u8 CoreDumpTOSec; /* 54h */
- u8 Reserved8; /* 55h */
+ u8 TimeSyncInterval; /* 55h */
u16 Reserved9; /* 56h */
__le32 Reserved10; /* 58h */
};
@@ -1113,6 +1121,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
* @cpu_msix_table_sz: table size
* @total_io_cnt: Gives total IO count, used to load balance the interrupts
* @ioc_coredump_loop: will have non-zero value when FW is in CoreDump state
+ * @timestamp_update_count: Counter to fire timeSync command
+ * time_sync_interval: Time sync interval read from man page 11
* @high_iops_outstanding: used to load balance the interrupts
* within high iops reply queues
* @msix_load_balance: Enables load balancing of interrupts across
@@ -1308,6 +1318,8 @@ struct MPT3SAS_ADAPTER {
MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
u32 non_operational_loop;
u8 ioc_coredump_loop;
+ u32 timestamp_update_count;
+ u32 time_sync_interval;
atomic64_t total_io_cnt;
atomic64_t high_iops_outstanding;
bool msix_load_balance;