1 files changed, 107 insertions, 34 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9ccc563d8730..303272af386e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -44,6 +44,10 @@
 
 #include "8250.h"
 
+#ifdef CONFIG_SPARC
+#include "suncore.h"
+#endif
+
 /*
  * Configuration:
  *   share_irqs - whether we pass IRQF_SHARED to request_irq().  This option
@@ -53,6 +57,13 @@ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
 
 static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
 
+static struct uart_driver serial8250_reg;
+
+static int serial_index(struct uart_port *port)
+{
+	return (serial8250_reg.minor - 64) + port->line;
+}
+
 /*
  * Debugging.
  */
@@ -145,11 +156,15 @@ struct uart_8250_port {
 };
 
 struct irq_info {
-	spinlock_t		lock;
+	struct			hlist_node node;
+	int			irq;
+	spinlock_t		lock;	/* Protects list not the hash */
 	struct list_head	*head;
 };
 
-static struct irq_info irq_lists[NR_IRQS];
+#define NR_IRQ_HASH		32	/* Can be adjusted later */
+static struct hlist_head irq_lists[NR_IRQ_HASH];
+static DEFINE_MUTEX(hash_mutex);	/* Used to walk the hash */
 
 /*
  * Here we define the default xmit fifo size used for each type of UART.
@@ -536,7 +551,7 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
 /*
  * FIFO support.
  */
-static inline void serial8250_clear_fifos(struct uart_8250_port *p)
+static void serial8250_clear_fifos(struct uart_8250_port *p)
 {
 	if (p->capabilities & UART_CAP_FIFO) {
 		serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
@@ -551,7 +566,7 @@ static inline void serial8250_clear_fifos(struct uart_8250_port *p)
  * capability" bit enabled.  Note that on XR16C850s, we need to
  * reset LCR to write to IER.
  */
-static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
 {
 	if (p->capabilities & UART_CAP_SLEEP) {
 		if (p->capabilities & UART_CAP_EFR) {
@@ -993,7 +1008,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 		return;
 
 	DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
-			up->port.line, up->port.iobase, up->port.membase);
+		       serial_index(&up->port), up->port.iobase, up->port.membase);
 
 	/*
 	 * We really do need global IRQs disabled here - we're going to
@@ -1128,8 +1143,8 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	if (up->capabilities != uart_config[up->port.type].flags) {
 		printk(KERN_WARNING
 		       "ttyS%d: detected caps %08x should be %08x\n",
-			up->port.line, up->capabilities,
-			uart_config[up->port.type].flags);
+		       serial_index(&up->port), up->capabilities,
+		       uart_config[up->port.type].flags);
 	}
 
 	up->port.fifosize = uart_config[up->port.type].fifo_size;
@@ -1424,8 +1439,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
 /*
  * This handles the interrupt from one port.
  */
-static inline void
-serial8250_handle_port(struct uart_8250_port *up)
+static void serial8250_handle_port(struct uart_8250_port *up)
 {
 	unsigned int status;
 	unsigned long flags;
@@ -1535,15 +1549,43 @@ static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
 		BUG_ON(i->head != &up->list);
 		i->head = NULL;
 	}
-
 	spin_unlock_irq(&i->lock);
+	/* List empty so throw away the hash node */
+	if (i->head == NULL) {
+		hlist_del(&i->node);
+		kfree(i);
+	}
 }
 
 static int serial_link_irq_chain(struct uart_8250_port *up)
 {
-	struct irq_info *i = irq_lists + up->port.irq;
+	struct hlist_head *h;
+	struct hlist_node *n;
+	struct irq_info *i;
 	int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
 
+	mutex_lock(&hash_mutex);
+
+	h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+	hlist_for_each(n, h) {
+		i = hlist_entry(n, struct irq_info, node);
+		if (i->irq == up->port.irq)
+			break;
+	}
+
+	if (n == NULL) {
+		i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
+		if (i == NULL) {
+			mutex_unlock(&hash_mutex);
+			return -ENOMEM;
+		}
+		spin_lock_init(&i->lock);
+		i->irq = up->port.irq;
+		hlist_add_head(&i->node, h);
+	}
+	mutex_unlock(&hash_mutex);
+
 	spin_lock_irq(&i->lock);
 
 	if (i->head) {
@@ -1567,14 +1609,28 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 
 static void serial_unlink_irq_chain(struct uart_8250_port *up)
 {
-	struct irq_info *i = irq_lists + up->port.irq;
+	struct irq_info *i;
+	struct hlist_node *n;
+	struct hlist_head *h;
+
+	mutex_lock(&hash_mutex);
 
+	h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+	hlist_for_each(n, h) {
+		i = hlist_entry(n, struct irq_info, node);
+		if (i->irq == up->port.irq)
+			break;
+	}
+
+	BUG_ON(n == NULL);
 	BUG_ON(i->head == NULL);
 
 	if (list_empty(i->head))
 		free_irq(up->port.irq, i);
 
 	serial_do_unlink(i, up);
+	mutex_unlock(&hash_mutex);
 }
 
 /* Base timer interval for polling */
@@ -1719,7 +1775,7 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state)
 /*
  *	Wait for transmitter & holding register to empty
  */
-static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
+static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 {
 	unsigned int status, tmout = 10000;
 
@@ -1854,7 +1910,8 @@ static int serial8250_startup(struct uart_port *port)
 	 */
 	if (!(up->port.flags & UPF_BUGGY_UART) &&
 	    (serial_inp(up, UART_LSR) == 0xff)) {
-		printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+		printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+		       serial_index(&up->port));
 		return -ENODEV;
 	}
 
@@ -1909,7 +1966,8 @@ static int serial8250_startup(struct uart_port *port)
 		 */
 		if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
 			up->bugs |= UART_BUG_THRE;
-			pr_debug("ttyS%d - using backup timer\n", port->line);
+			pr_debug("ttyS%d - using backup timer\n",
+				 serial_index(port));
 		}
 	}
 
@@ -1969,7 +2027,7 @@ static int serial8250_startup(struct uart_port *port)
 		if (!(up->bugs & UART_BUG_TXEN)) {
 			up->bugs |= UART_BUG_TXEN;
 			pr_debug("ttyS%d - enabling bad tx status workarounds\n",
-				 port->line);
+				 serial_index(port));
 		}
 	} else {
 		up->bugs &= ~UART_BUG_TXEN;
@@ -2211,9 +2269,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 		serial_outp(up, UART_EFR, efr);
 	}
 
-#ifdef CONFIG_ARCH_OMAP15XX
+#ifdef CONFIG_ARCH_OMAP
 	/* Workaround to enable 115200 baud on OMAP1510 internal ports */
-	if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) {
+	if (cpu_is_omap1510() && is_omap_port(up)) {
 		if (baud == 115200) {
 			quot = 1;
 			serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
@@ -2266,18 +2324,27 @@ serial8250_pm(struct uart_port *port, unsigned int state,
 		p->pm(port, state, oldstate);
 }
 
+static unsigned int serial8250_port_size(struct uart_8250_port *pt)
+{
+	if (pt->port.iotype == UPIO_AU)
+		return 0x100000;
+#ifdef CONFIG_ARCH_OMAP
+	if (is_omap_port(pt))
+		return 0x16 << pt->port.regshift;
+#endif
+	return 8 << pt->port.regshift;
+}
+
 /*
  * Resource handling.
  */
 static int serial8250_request_std_resource(struct uart_8250_port *up)
 {
-	unsigned int size = 8 << up->port.regshift;
+	unsigned int size = serial8250_port_size(up);
 	int ret = 0;
 
 	switch (up->port.iotype) {
 	case UPIO_AU:
-		size = 0x100000;
-		/* fall thru */
 	case UPIO_TSI:
 	case UPIO_MEM32:
 	case UPIO_MEM:
@@ -2311,12 +2378,10 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 
 static void serial8250_release_std_resource(struct uart_8250_port *up)
 {
-	unsigned int size = 8 << up->port.regshift;
+	unsigned int size = serial8250_port_size(up);
 
 	switch (up->port.iotype) {
 	case UPIO_AU:
-		size = 0x100000;
-		/* fall thru */
 	case UPIO_TSI:
 	case UPIO_MEM32:
 	case UPIO_MEM:
@@ -2428,7 +2493,7 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 static int
 serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+	if (ser->irq >= nr_irqs || ser->irq < 0 ||
 	    ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
 	    ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
 	    ser->type == PORT_STARTECH)
@@ -2630,7 +2695,6 @@ static int serial8250_console_early_setup(void)
 	return serial8250_find_port_for_earlycon();
 }
 
-static struct uart_driver serial8250_reg;
 static struct console serial8250_console = {
 	.name		= "ttyS",
 	.write		= serial8250_console_write,
@@ -2677,7 +2741,6 @@ static struct uart_driver serial8250_reg = {
 	.dev_name		= "ttyS",
 	.major			= TTY_MAJOR,
 	.minor			= 64,
-	.nr			= UART_NR,
 	.cons			= SERIAL8250_CONSOLE,
 };
 
@@ -2950,7 +3013,7 @@ EXPORT_SYMBOL(serial8250_unregister_port);
 
 static int __init serial8250_init(void)
 {
-	int ret, i;
+	int ret;
 
 	if (nr_uarts > UART_NR)
 		nr_uarts = UART_NR;
@@ -2959,10 +3022,12 @@ static int __init serial8250_init(void)
 		"%d ports, IRQ sharing %sabled\n", nr_uarts,
 		share_irqs ? "en" : "dis");
 
-	for (i = 0; i < NR_IRQS; i++)
-		spin_lock_init(&irq_lists[i].lock);
-
+#ifdef CONFIG_SPARC
+	ret = sunserial_register_minors(&serial8250_reg, UART_NR);
+#else
+	serial8250_reg.nr = UART_NR;
 	ret = uart_register_driver(&serial8250_reg);
+#endif
 	if (ret)
 		goto out;
 
@@ -2984,11 +3049,15 @@ static int __init serial8250_init(void)
 		goto out;
 
 	platform_device_del(serial8250_isa_devs);
- put_dev:
+put_dev:
 	platform_device_put(serial8250_isa_devs);
- unreg_uart_drv:
+unreg_uart_drv:
+#ifdef CONFIG_SPARC
+	sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
 	uart_unregister_driver(&serial8250_reg);
- out:
+#endif
+out:
 	return ret;
 }
 
@@ -3006,7 +3075,11 @@ static void __exit serial8250_exit(void)
 	platform_driver_unregister(&serial8250_isa_driver);
 	platform_device_unregister(isa_dev);
 
+#ifdef CONFIG_SPARC
+	sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
 	uart_unregister_driver(&serial8250_reg);
+#endif
 }
 
 module_init(serial8250_init);