1 files changed, 0 insertions, 64 deletions
diff --git a/drivers/serial/apbuart.h b/drivers/serial/apbuart.h
deleted file mode 100644
index 5faf87c8d2bc..000000000000
--- a/drivers/serial/apbuart.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __GRLIB_APBUART_H__
-#define __GRLIB_APBUART_H__
-
-#include <asm/io.h>
-
-#define UART_NR		8
-static int grlib_apbuart_port_nr;
-
-struct grlib_apbuart_regs_map {
-	u32 data;
-	u32 status;
-	u32 ctrl;
-	u32 scaler;
-};
-
-struct amba_prom_registers {
-	unsigned int phys_addr;
-	unsigned int reg_size;
-};
-
-/*
- *  The following defines the bits in the APBUART Status Registers.
- */
-#define UART_STATUS_DR   0x00000001	/* Data Ready */
-#define UART_STATUS_TSE  0x00000002	/* TX Send Register Empty */
-#define UART_STATUS_THE  0x00000004	/* TX Hold Register Empty */
-#define UART_STATUS_BR   0x00000008	/* Break Error */
-#define UART_STATUS_OE   0x00000010	/* RX Overrun Error */
-#define UART_STATUS_PE   0x00000020	/* RX Parity Error */
-#define UART_STATUS_FE   0x00000040	/* RX Framing Error */
-#define UART_STATUS_ERR  0x00000078	/* Error Mask */
-
-/*
- *  The following defines the bits in the APBUART Ctrl Registers.
- */
-#define UART_CTRL_RE     0x00000001	/* Receiver enable */
-#define UART_CTRL_TE     0x00000002	/* Transmitter enable */
-#define UART_CTRL_RI     0x00000004	/* Receiver interrupt enable */
-#define UART_CTRL_TI     0x00000008	/* Transmitter irq */
-#define UART_CTRL_PS     0x00000010	/* Parity select */
-#define UART_CTRL_PE     0x00000020	/* Parity enable */
-#define UART_CTRL_FL     0x00000040	/* Flow control enable */
-#define UART_CTRL_LB     0x00000080	/* Loopback enable */
-
-#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase))
-
-#define APBBASE_DATA_P(port)	(&(APBBASE(port)->data))
-#define APBBASE_STATUS_P(port)	(&(APBBASE(port)->status))
-#define APBBASE_CTRL_P(port)	(&(APBBASE(port)->ctrl))
-#define APBBASE_SCALAR_P(port)	(&(APBBASE(port)->scaler))
-
-#define UART_GET_CHAR(port)	(__raw_readl(APBBASE_DATA_P(port)))
-#define UART_PUT_CHAR(port, v)	(__raw_writel(v, APBBASE_DATA_P(port)))
-#define UART_GET_STATUS(port)	(__raw_readl(APBBASE_STATUS_P(port)))
-#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port)))
-#define UART_GET_CTRL(port)	(__raw_readl(APBBASE_CTRL_P(port)))
-#define UART_PUT_CTRL(port, v)	(__raw_writel(v, APBBASE_CTRL_P(port)))
-#define UART_GET_SCAL(port)	(__raw_readl(APBBASE_SCALAR_P(port)))
-#define UART_PUT_SCAL(port, v)	(__raw_writel(v, APBBASE_SCALAR_P(port)))
-
-#define UART_RX_DATA(s)		(((s) & UART_STATUS_DR) != 0)
-#define UART_TX_READY(s)	(((s) & UART_STATUS_THE) != 0)
-
-#endif /* __GRLIB_APBUART_H__ */