summaryrefslogtreecommitdiffstats
path: root/drivers/serial/bfin_5xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/bfin_5xx.c')
-rw-r--r--drivers/serial/bfin_5xx.c123
1 files changed, 93 insertions, 30 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4a0d30bed9f1..569f0e2476c6 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1,7 +1,7 @@
/*
* Blackfin On-Chip Serial Driver
*
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2008 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -42,6 +42,9 @@
#define BFIN_SERIAL_MAJOR 204
#define BFIN_SERIAL_MINOR 64
+static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
+
/*
* Setup for console. Argument comes from the menuconfig
*/
@@ -126,13 +129,13 @@ static int kgdb_entry_state;
void kgdb_put_debug_char(int chr)
{
struct bfin_serial_port *uart;
-
+
if (CONFIG_KGDB_UART_PORT < 0
|| CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
+
while (!(UART_GET_LSR(uart) & THRE)) {
SSYNC();
}
@@ -152,7 +155,7 @@ int kgdb_get_debug_char(void)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
+
while(!(UART_GET_LSR(uart) & DR)) {
SSYNC();
}
@@ -298,7 +301,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
bfin_serial_mctrl_check(uart);
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
- bfin_serial_stop_tx(&uart->port);
+#ifdef CONFIG_BF54x
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+#endif
+ UART_CLEAR_IER(uart, ETBEI);
return;
}
@@ -317,9 +324,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uart->port);
-
- if (uart_circ_empty(xmit))
- bfin_serial_stop_tx(&uart->port);
}
static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
@@ -645,6 +649,42 @@ static int bfin_serial_startup(struct uart_port *port)
free_irq(uart->port.irq, uart);
return -EBUSY;
}
+
+# ifdef CONFIG_BF54x
+ {
+ unsigned uart_dma_ch_rx, uart_dma_ch_tx;
+
+ switch (uart->port.irq) {
+ case IRQ_UART3_RX:
+ uart_dma_ch_rx = CH_UART3_RX;
+ uart_dma_ch_tx = CH_UART3_TX;
+ break;
+ case IRQ_UART2_RX:
+ uart_dma_ch_rx = CH_UART2_RX;
+ uart_dma_ch_tx = CH_UART2_TX;
+ break;
+ default:
+ uart_dma_ch_rx = uart_dma_ch_tx = 0;
+ break;
+ };
+
+ if (uart_dma_ch_rx &&
+ request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
+ printk(KERN_NOTICE"Fail to attach UART interrupt\n");
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq + 1, uart);
+ return -EBUSY;
+ }
+ if (uart_dma_ch_tx &&
+ request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
+ printk(KERN_NOTICE "Fail to attach UART interrupt\n");
+ free_dma(uart_dma_ch_rx);
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq + 1, uart);
+ return -EBUSY;
+ }
+ }
+# endif
#endif
UART_SET_IER(uart, ERBFI);
return 0;
@@ -662,6 +702,20 @@ static void bfin_serial_shutdown(struct uart_port *port)
del_timer(&(uart->rx_dma_timer));
dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
#else
+#ifdef CONFIG_BF54x
+ switch (uart->port.irq) {
+ case IRQ_UART3_RX:
+ free_dma(CH_UART3_RX);
+ free_dma(CH_UART3_TX);
+ break;
+ case IRQ_UART2_RX:
+ free_dma(CH_UART2_RX);
+ free_dma(CH_UART2_TX);
+ break;
+ default:
+ break;
+ };
+#endif
#ifdef CONFIG_KGDB_UART
if (uart->port.line != CONFIG_KGDB_UART_PORT)
#endif
@@ -757,6 +811,9 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
val |= UCEN;
UART_PUT_GCTL(uart, val);
+ /* Port speed changed, update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
spin_unlock_irqrestore(&uart->port.lock, flags);
}
@@ -859,8 +916,9 @@ static void __init bfin_serial_init_ports(void)
return;
first = 0;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
bfin_serial_ports[i].port.uartclk = get_sclk();
+ bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
bfin_serial_ports[i].port.line = i;
bfin_serial_ports[i].port.iotype = UPIO_MEM;
@@ -961,7 +1019,7 @@ bfin_serial_console_setup(struct console *co, char *options)
* if so, search for the first available port that does have
* console support.
*/
- if (co->index == -1 || co->index >= nr_ports)
+ if (co->index == -1 || co->index >= nr_active_ports)
co->index = 0;
uart = &bfin_serial_ports[co->index];
@@ -1056,7 +1114,7 @@ static __init void early_serial_write(struct console *con, const char *s,
}
}
-static struct __init console bfin_early_serial_console = {
+static struct __initdata console bfin_early_serial_console = {
.name = "early_BFuart",
.write = early_serial_write,
.device = uart_console_device,
@@ -1072,7 +1130,7 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
struct bfin_serial_port *uart;
struct ktermios t;
- if (port == -1 || port >= nr_ports)
+ if (port == -1 || port >= nr_active_ports)
port = 0;
bfin_serial_init_ports();
bfin_early_serial_console.index = port;
@@ -1100,20 +1158,26 @@ static struct uart_driver bfin_serial_reg = {
static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
{
- struct bfin_serial_port *uart = platform_get_drvdata(dev);
+ int i;
- if (uart)
- uart_suspend_port(&bfin_serial_reg, &uart->port);
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ }
return 0;
}
static int bfin_serial_resume(struct platform_device *dev)
{
- struct bfin_serial_port *uart = platform_get_drvdata(dev);
+ int i;
- if (uart)
- uart_resume_port(&bfin_serial_reg, &uart->port);
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ }
return 0;
}
@@ -1128,32 +1192,31 @@ static int bfin_serial_probe(struct platform_device *dev)
break;
if (i < dev->num_resources) {
- for (i = 0; i < nr_ports; i++, res++) {
+ for (i = 0; i < nr_active_ports; i++, res++) {
if (bfin_serial_ports[i].port.mapbase != res->start)
continue;
bfin_serial_ports[i].port.dev = &dev->dev;
uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
- platform_set_drvdata(dev, &bfin_serial_ports[i]);
}
}
return 0;
}
-static int bfin_serial_remove(struct platform_device *pdev)
+static int bfin_serial_remove(struct platform_device *dev)
{
- struct bfin_serial_port *uart = platform_get_drvdata(pdev);
-
+ int i;
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ bfin_serial_ports[i].port.dev = NULL;
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- gpio_free(uart->cts_pin);
- gpio_free(uart->rts_pin);
+ gpio_free(bfin_serial_ports[i].cts_pin);
+ gpio_free(bfin_serial_ports[i].rts_pin);
#endif
-
- platform_set_drvdata(pdev, NULL);
-
- if (uart)
- uart_remove_one_port(&bfin_serial_reg, &uart->port);
+ }
return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 19:17:56 +0100