diff options
Diffstat (limited to 'drivers/serial/mfd.c')
| -rw-r--r-- | drivers/serial/mfd.c | 47 |
1 files changed, 33 insertions, 14 deletions
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c index dc0967fb9ea6..5fc699e929dc 100644 --- a/drivers/serial/mfd.c +++ b/drivers/serial/mfd.c @@ -172,6 +172,9 @@ static ssize_t port_show_regs(struct file *file, char __user *user_buf, len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV)); + if (len > HSU_REGS_BUFSIZE) + len = HSU_REGS_BUFSIZE; + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); kfree(buf); return ret; @@ -219,6 +222,9 @@ static ssize_t dma_show_regs(struct file *file, char __user *user_buf, len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR)); + if (len > HSU_REGS_BUFSIZE) + len = HSU_REGS_BUFSIZE; + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); kfree(buf); return ret; @@ -925,39 +931,52 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, cval |= UART_LCR_EPAR; /* + * The base clk is 50Mhz, and the baud rate come from: + * baud = 50M * MUL / (DIV * PS * DLAB) + * * For those basic low baud rate we can get the direct - * scalar from 2746800, like 115200 = 2746800/24, for those - * higher baud rate, we have to handle them case by case, - * but DIV reg is never touched as its default value 0x3d09 + * scalar from 2746800, like 115200 = 2746800/24. For those + * higher baud rate, we handle them case by case, mainly by + * adjusting the MUL/PS registers, and DIV register is kept + * as default value 0x3d09 to make things simple */ baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - quot = uart_get_divisor(port, baud); + quot = 1; switch (baud) { case 3500000: mul = 0x3345; ps = 0xC; - quot = 1; + break; + case 3000000: + mul = 0x2EE0; break; case 2500000: mul = 0x2710; - ps = 0x10; - quot = 1; break; - case 18432000: + case 2000000: + mul = 0x1F40; + break; + case 1843200: mul = 0x2400; - ps = 0x10; - quot = 1; break; case 1500000: - mul = 0x1D4C; - ps = 0xc; - quot = 1; + mul = 0x1770; + break; + case 1000000: + mul = 0xFA0; + break; + case 500000: + mul = 0x7D0; break; default: - ; + /* Use uart_get_divisor to get quot for other baud rates */ + quot = 0; } + if (!quot) + quot = uart_get_divisor(port, baud); + if ((up->port.uartclk / quot) < (2400 * 16)) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B; else if ((up->port.uartclk / quot) < (230400 * 16)) |