diff options
Diffstat (limited to 'drivers/serial')
27 files changed, 289 insertions, 420 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 8c5c276c5577..7572665a8855 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -375,23 +375,18 @@ static void serial21285_setup_ports(void) } #ifdef CONFIG_SERIAL_21285_CONSOLE +static void serial21285_console_putchar(struct uart_port *port, int ch) +{ + while (*CSR_UARTFLG & 0x20) + barrier(); + *CSR_UARTDR = ch; +} static void serial21285_console_write(struct console *co, const char *s, unsigned int count) { - int i; - - for (i = 0; i < count; i++) { - while (*CSR_UARTFLG & 0x20) - barrier(); - *CSR_UARTDR = s[i]; - if (s[i] == '\n') { - while (*CSR_UARTFLG & 0x20) - barrier(); - *CSR_UARTDR = '\r'; - } - } + uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); } static void __init diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index 7f0f35a05dca..b88a7c1158af 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -101,8 +101,6 @@ struct tty_driver *serial_driver; #define RS_ISR_PASS_LIMIT 256 -#define _INLINE_ inline - static void change_speed(struct m68k_serial *info); /* @@ -262,7 +260,7 @@ static void batten_down_hatches(void) /* Drop into the debugger */ } -static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short status) +static void status_handle(struct m68k_serial *info, unsigned short status) { #if 0 if(status & DCD) { @@ -289,7 +287,8 @@ static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short stat return; } -static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *regs, unsigned short rx) +static void receive_chars(struct m68k_serial *info, struct pt_regs *regs, + unsigned short rx) { struct tty_struct *tty = info->tty; m68328_uart *uart = &uart_addr[info->line]; @@ -359,7 +358,7 @@ clear_and_exit: return; } -static _INLINE_ void transmit_chars(struct m68k_serial *info) +static void transmit_chars(struct m68k_serial *info) { m68328_uart *uart = &uart_addr[info->line]; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 7aca22c9976d..5996d3cd0ed8 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2182,6 +2182,14 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) } } +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -2193,7 +2201,6 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; unsigned int ier; - int i; touch_nmi_watchdog(); @@ -2207,22 +2214,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) else serial_out(up, UART_IER, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up, UART_LSR_THRE); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up, UART_LSR_THRE); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, serial8250_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c index 59ba5d993b4b..7e511199b4c5 100644 --- a/drivers/serial/8250_early.c +++ b/drivers/serial/8250_early.c @@ -74,7 +74,7 @@ static void __init wait_for_xmitr(struct uart_port *port) } } -static void __init putc(struct uart_port *port, unsigned char c) +static void __init putc(struct uart_port *port, int c) { wait_for_xmitr(port); serial_out(port, UART_TX, c); @@ -89,12 +89,7 @@ static void __init early_uart_write(struct console *console, const char *s, unsi ier = serial_in(port, UART_IER); serial_out(port, UART_IER, 0); - while (*s && count-- > 0) { - putc(port, *s); - if (*s == '\n') - putc(port, '\r'); - s++; - } + uart_console_write(port, s, count, putc); /* Wait for transmitter to become empty and restore the IER */ wait_for_xmitr(port); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 89e5413cc2a3..c66ef96c71b4 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -866,7 +866,7 @@ config SERIAL_M32R_PLDSIO config SERIAL_TXX9 bool "TMPTX39XX/49XX SIO support" - depends HAS_TXX9_SERIAL && BROKEN + depends HAS_TXX9_SERIAL select SERIAL_CORE default y diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 321a3b3a5728..e04d5e82d9ae 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -591,12 +591,18 @@ static struct uart_amba_port amba_ports[UART_NR] = { #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE +static void pl010_console_putchar(struct uart_port *port, int ch) +{ + while (!UART_TX_READY(UART_GET_FR(port))) + barrier(); + UART_PUT_CHAR(port, ch); +} + static void pl010_console_write(struct console *co, const char *s, unsigned int count) { struct uart_port *port = &amba_ports[co->index].port; unsigned int status, old_cr; - int i; /* * First save the CR then disable the interrupts @@ -604,21 +610,7 @@ pl010_console_write(struct console *co, const char *s, unsigned int count) old_cr = UART_GET_CR(port); UART_PUT_CR(port, UART01x_CR_UARTEN); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = UART_GET_FR(port); - } while (!UART_TX_READY(status)); - UART_PUT_CHAR(port, s[i]); - if (s[i] == '\n') { - do { - status = UART_GET_FR(port); - } while (!UART_TX_READY(status)); - UART_PUT_CHAR(port, '\r'); - } - } + uart_console_write(port, s, count, pl010_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 034a029e356e..3d966cfc9a38 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -587,14 +587,12 @@ static struct uart_amba_port *amba_ports[UART_NR]; #ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE -static inline void -pl011_console_write_char(struct uart_amba_port *uap, char ch) +static void pl011_console_putchar(struct uart_port *port, int ch) { - unsigned int status; + struct uart_amba_port *uap = (struct uart_amba_port *)port; - do { - status = readw(uap->port.membase + UART01x_FR); - } while (status & UART01x_FR_TXFF); + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + barrier(); writew(ch, uap->port.membase + UART01x_DR); } @@ -603,7 +601,6 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) { struct uart_amba_port *uap = amba_ports[co->index]; unsigned int status, old_cr, new_cr; - int i; clk_enable(uap->clk); @@ -615,14 +612,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; writew(new_cr, uap->port.membase + UART011_CR); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - pl011_console_write_char(uap, s[i]); - if (s[i] == '\n') - pl011_console_write_char(uap, '\r'); - } + uart_console_write(&uap->port, s, count, pl011_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c index 2113feb75c39..6547fe0cef96 100644 --- a/drivers/serial/at91_serial.c +++ b/drivers/serial/at91_serial.c @@ -711,6 +711,12 @@ void __init at91_register_uart(int idx, int port) } #ifdef CONFIG_SERIAL_AT91_CONSOLE +static void at91_console_putchar(struct uart_port *port, int ch) +{ + while (!(UART_GET_CSR(port) & AT91_US_TXRDY)) + barrier(); + UART_PUT_CHAR(port, ch); +} /* * Interrupts are disabled on entering @@ -718,7 +724,7 @@ void __init at91_register_uart(int idx, int port) static void at91_console_write(struct console *co, const char *s, u_int count) { struct uart_port *port = at91_ports + co->index; - unsigned int status, i, imr; + unsigned int status, imr; /* * First, save IMR and then disable interrupts @@ -726,21 +732,7 @@ static void at91_console_write(struct console *co, const char *s, u_int count) imr = UART_GET_IMR(port); /* get interrupt mask */ UART_PUT_IDR(port, AT91_US_RXRDY | AT91_US_TXRDY); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = UART_GET_CSR(port); - } while (!(status & AT91_US_TXRDY)); - UART_PUT_CHAR(port, s[i]); - if (s[i] == '\n') { - do { - status = UART_GET_CSR(port); - } while (!(status & AT91_US_TXRDY)); - UART_PUT_CHAR(port, '\r'); - } - } + uart_console_write(port, s, count, at91_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c index 344022fe53ef..948880ac5878 100644 --- a/drivers/serial/au1x00_uart.c +++ b/drivers/serial/au1x00_uart.c @@ -133,13 +133,12 @@ static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { { "AU1X00_UART",16, UART_CLEAR_FIFO | UART_USE_FIFO }, }; -static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset) +static unsigned int serial_in(struct uart_8250_port *up, int offset) { return au_readl((unsigned long)up->port.membase + offset); } -static _INLINE_ void -serial_out(struct uart_8250_port *up, int offset, int value) +static void serial_out(struct uart_8250_port *up, int offset, int value) { au_writel(value, (unsigned long)up->port.membase + offset); } @@ -237,7 +236,7 @@ static void serial8250_enable_ms(struct uart_port *port) serial_out(up, UART_IER, up->ier); } -static _INLINE_ void +static void receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) { struct tty_struct *tty = up->port.info->tty; @@ -312,7 +311,7 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) spin_lock(&up->port.lock); } -static _INLINE_ void transmit_chars(struct uart_8250_port *up) +static void transmit_chars(struct uart_8250_port *up) { struct circ_buf *xmit = &up->port.info->xmit; int count; @@ -346,7 +345,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up) serial8250_stop_tx(&up->port); } -static _INLINE_ void check_modem_status(struct uart_8250_port *up) +static void check_modem_status(struct uart_8250_port *up) { int status; @@ -1121,6 +1120,14 @@ static inline void wait_for_xmitr(struct uart_8250_port *up) } } +static void au1x00_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1132,7 +1139,6 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; unsigned int ier; - int i; /* * First save the UER then disable the interrupts @@ -1140,22 +1146,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) ier = serial_in(up, UART_IER); serial_out(up, UART_IER, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, au1x00_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index ce7b2e4ecd17..2691112c84ad 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -424,6 +424,13 @@ static struct uart_port clps711x_ports[UART_NR] = { }; #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE +static void clps711xuart_console_putchar(struct uart_port *port, int ch) +{ + while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) + barrier(); + clps_writel(ch, UARTDR(port)); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -438,7 +445,6 @@ clps711xuart_console_write(struct console *co, const char *s, { struct uart_port *port = clps711x_ports + co->index; unsigned int status, syscon; - int i; /* * Ensure that the port is enabled. @@ -446,21 +452,7 @@ clps711xuart_console_write(struct console *co, const char *s, syscon = clps_readl(SYSCON(port)); clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = clps_readl(SYSFLG(port)); - } while (status & SYSFLG_UTXFF); - clps_writel(s[i], UARTDR(port)); - if (s[i] == '\n') { - do { - status = clps_readl(SYSFLG(port)); - } while (status & SYSFLG_UTXFF); - clps_writel('\r', UARTDR(port)); - } - } + uart_console_write(port, s, count, clps711xuart_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index be12623d8544..89700141f87e 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -481,8 +481,6 @@ static char *serial_version = "$Revision: 1.25 $"; #include "serial_compat.h" #endif -#define _INLINE_ inline - struct tty_driver *serial_driver; /* serial subtype definitions */ @@ -591,8 +589,6 @@ static void rs_throttle(struct tty_struct * tty); static void rs_wait_until_sent(struct tty_struct *tty, int timeout); static int rs_write(struct tty_struct * tty, int from_user, const unsigned char *buf, int count); -extern _INLINE_ int rs_raw_write(struct tty_struct * tty, int from_user, - const unsigned char *buf, int count); #ifdef CONFIG_ETRAX_RS485 static int e100_write_rs485(struct tty_struct * tty, int from_user, const unsigned char *buf, int count); @@ -1538,8 +1534,7 @@ e100_enable_rxdma_irq(struct e100_serial *info) /* the tx DMA uses only dma_descr interrupt */ -static _INLINE_ void -e100_disable_txdma_irq(struct e100_serial *info) +static void e100_disable_txdma_irq(struct e100_serial *info) { #ifdef SERIAL_DEBUG_INTR printk("txdma_irq(%d): 0\n",info->line); @@ -1548,8 +1543,7 @@ e100_disable_txdma_irq(struct e100_serial *info) *R_IRQ_MASK2_CLR = info->irq; } -static _INLINE_ void -e100_enable_txdma_irq(struct e100_serial *info) +static void e100_enable_txdma_irq(struct e100_serial *info) { #ifdef SERIAL_DEBUG_INTR printk("txdma_irq(%d): 1\n",info->line); @@ -1558,8 +1552,7 @@ e100_enable_txdma_irq(struct e100_serial *info) *R_IRQ_MASK2_SET = info->irq; } -static _INLINE_ void -e100_disable_txdma_channel(struct e100_serial *info) +static void e100_disable_txdma_channel(struct e100_serial *info) { unsigned long flags; @@ -1599,8 +1592,7 @@ e100_disable_txdma_channel(struct e100_serial *info) } -static _INLINE_ void -e100_enable_txdma_channel(struct e100_serial *info) +static void e100_enable_txdma_channel(struct e100_serial *info) { unsigned long flags; @@ -1625,8 +1617,7 @@ e100_enable_txdma_channel(struct e100_serial *info) restore_flags(flags); } -static _INLINE_ void -e100_disable_rxdma_channel(struct e100_serial *info) +static void e100_disable_rxdma_channel(struct e100_serial *info) { unsigned long flags; @@ -1665,8 +1656,7 @@ e100_disable_rxdma_channel(struct e100_serial *info) } -static _INLINE_ void -e100_enable_rxdma_channel(struct e100_serial *info) +static void e100_enable_rxdma_channel(struct e100_serial *info) { unsigned long flags; @@ -1913,9 +1903,7 @@ rs_start(struct tty_struct *tty) * This routine is used by the interrupt handler to schedule * processing in the software interrupt portion of the driver. */ -static _INLINE_ void -rs_sched_event(struct e100_serial *info, - int event) +static void rs_sched_event(struct e100_serial *info, int event) { if (info->event & (1 << event)) return; @@ -2155,8 +2143,9 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl return 1; } -extern _INLINE_ unsigned int -handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsigned int recvl) +static unsigned int handle_descr_data(struct e100_serial *info, + struct etrax_dma_descr *descr, + unsigned int recvl) { struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; @@ -2182,8 +2171,7 @@ handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsig return recvl; } -static _INLINE_ unsigned int -handle_all_descr_data(struct e100_serial *info) +static unsigned int handle_all_descr_data(struct e100_serial *info) { struct etrax_dma_descr *descr; unsigned int recvl; @@ -2230,8 +2218,7 @@ handle_all_descr_data(struct e100_serial *info) return ret; } -static _INLINE_ void -receive_chars_dma(struct e100_serial *info) +static void receive_chars_dma(struct e100_serial *info) { struct tty_struct *tty; unsigned char rstat; @@ -2292,8 +2279,7 @@ receive_chars_dma(struct e100_serial *info) *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); } -static _INLINE_ int -start_recv_dma(struct e100_serial *info) +static int start_recv_dma(struct e100_serial *info) { struct etrax_dma_descr *descr = info->rec_descr; struct etrax_recv_buffer *buffer; @@ -2348,11 +2334,6 @@ start_receive(struct e100_serial *info) } -static _INLINE_ void -status_handle(struct e100_serial *info, unsigned short status) -{ -} - /* the bits in the MASK2 register are laid out like this: DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR where I is the input channel and O is the output channel for the port. @@ -2454,8 +2435,7 @@ rec_interrupt(int irq, void *dev_id, struct pt_regs * regs) return IRQ_RETVAL(handled); } /* rec_interrupt */ -static _INLINE_ int -force_eop_if_needed(struct e100_serial *info) +static int force_eop_if_needed(struct e100_serial *info) { /* We check data_avail bit to determine if data has * arrived since last time @@ -2499,8 +2479,7 @@ force_eop_if_needed(struct e100_serial *info) return 1; } -extern _INLINE_ void -flush_to_flip_buffer(struct e100_serial *info) +static void flush_to_flip_buffer(struct e100_serial *info) { struct tty_struct *tty; struct etrax_recv_buffer *buffer; @@ -2611,8 +2590,7 @@ flush_to_flip_buffer(struct e100_serial *info) tty_flip_buffer_push(tty); } -static _INLINE_ void -check_flush_timeout(struct e100_serial *info) +static void check_flush_timeout(struct e100_serial *info) { /* Flip what we've got (if we can) */ flush_to_flip_buffer(info); @@ -2741,7 +2719,7 @@ TODO: The break will be delayed until an F or V character is received. */ -extern _INLINE_ +static struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) { unsigned long data_read; @@ -2875,8 +2853,7 @@ more_data: return info; } -extern _INLINE_ -struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) +static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) { unsigned char rstat; @@ -2995,7 +2972,7 @@ struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) return info; } /* handle_ser_rx_interrupt */ -extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info) +static void handle_ser_tx_interrupt(struct e100_serial *info) { unsigned long flags; @@ -3621,9 +3598,8 @@ rs_flush_chars(struct tty_struct *tty) restore_flags(flags); } -extern _INLINE_ int -rs_raw_write(struct tty_struct * tty, int from_user, - const unsigned char *buf, int count) +static int rs_raw_write(struct tty_struct * tty, int from_user, + const unsigned char *buf, int count) { int c, ret = 0; struct e100_serial *info = (struct e100_serial *)tty->driver_data; @@ -4710,7 +4686,7 @@ rs_open(struct tty_struct *tty, struct file * filp) * /proc fs routines.... */ -extern _INLINE_ int line_info(char *buf, struct e100_serial *info) +static int line_info(char *buf, struct e100_serial *info) { char stat_buf[30]; int ret; diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index ba5541de673b..bf71bad5c34f 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -674,11 +674,12 @@ static void dz_reset(struct dz_port *dport) } #ifdef CONFIG_SERIAL_DZ_CONSOLE -static void dz_console_put_char(struct dz_port *dport, unsigned char ch) +static void dz_console_putchar(struct uart_port *port, int ch) { + struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; int loops = 2500; - unsigned short tmp = ch; + unsigned short tmp = (unsigned char)ch; /* this code sends stuff out to serial device - spinning its wheels and waiting. */ @@ -694,6 +695,7 @@ static void dz_console_put_char(struct dz_port *dport, unsigned char ch) spin_unlock_irqrestore(&dport->port.lock, flags); } + /* * ------------------------------------------------------------------- * dz_console_print () @@ -710,11 +712,7 @@ static void dz_console_print(struct console *cons, #ifdef DEBUG_DZ prom_printf((char *) str); #endif - while (count--) { - if (*str == '\n') - dz_console_put_char(dport, '\r'); - dz_console_put_char(dport, *str++); - } + uart_console_write(&dport->port, str, count, dz_console_putchar); } static int __init dz_console_setup(struct console *co, char *options) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 4d53fb5ca87b..c3b7a6673e9c 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -743,6 +743,13 @@ static void __init imx_init_ports(void) } #ifdef CONFIG_SERIAL_IMX_CONSOLE +static void imx_console_putchar(struct uart_port *port, int ch) +{ + struct imx_port *sport = (struct imx_port *)port; + while ((UTS((u32)sport->port.membase) & UTS_TXFULL)) + barrier(); + URTX0((u32)sport->port.membase) = ch; +} /* * Interrupts are disabled on entering @@ -751,7 +758,7 @@ static void imx_console_write(struct console *co, const char *s, unsigned int count) { struct imx_port *sport = &imx_ports[co->index]; - unsigned int old_ucr1, old_ucr2, i; + unsigned int old_ucr1, old_ucr2; /* * First, save UCR1/2 and then disable interrupts @@ -764,22 +771,7 @@ imx_console_write(struct console *co, const char *s, unsigned int count) & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN; - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - - while ((UTS((u32)sport->port.membase) & UTS_TXFULL)) - barrier(); - - URTX0((u32)sport->port.membase) = s[i]; - - if (s[i] == '\n') { - while ((UTS((u32)sport->port.membase) & UTS_TXFULL)) - barrier(); - URTX0((u32)sport->port.membase) = '\r'; - } - } + uart_console_write(&sport->port, s, count, imx_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 193722d680cf..651772474ac1 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -967,8 +967,9 @@ static struct zilog_layout * __init get_zs(int chip) #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ #ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE -static void ip22zilog_put_char(struct zilog_channel *channel, unsigned char ch) +static void ip22zilog_put_char(struct uart_port *port, int ch) { + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); int loops = ZS_PUT_CHAR_MAX_DELAY; /* This is a timed polling loop so do not switch the explicit @@ -992,16 +993,10 @@ static void ip22zilog_console_write(struct console *con, const char *s, unsigned int count) { struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); unsigned long flags; - int i; spin_lock_irqsave(&up->port.lock, flags); - for (i = 0; i < count; i++, s++) { - ip22zilog_put_char(channel, *s); - if (*s == 10) - ip22zilog_put_char(channel, 13); - } + uart_console_write(&up->port, s, count, ip22zilog_put_char); udelay(2); spin_unlock_irqrestore(&up->port.lock, flags); } diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index 242a04104393..e9c10c0a30fc 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -248,17 +248,17 @@ static void sio_error(int *status) #endif /* CONFIG_SERIAL_M32R_PLDSIO */ -static _INLINE_ unsigned int sio_in(struct uart_sio_port *up, int offset) +static unsigned int sio_in(struct uart_sio_port *up, int offset) { return __sio_in(up->port.iobase + offset); } -static _INLINE_ void sio_out(struct uart_sio_port *up, int offset, int value) +static void sio_out(struct uart_sio_port *up, int offset, int value) { __sio_out(value, up->port.iobase + offset); } -static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset) +static unsigned int serial_in(struct uart_sio_port *up, int offset) { if (!offset) return 0; @@ -266,8 +266,7 @@ static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset) return __sio_in(offset); } -static _INLINE_ void -serial_out(struct uart_sio_port *up, int offset, int value) +static void serial_out(struct uart_sio_port *up, int offset, int value) { if (!offset) return; @@ -326,8 +325,8 @@ static void m32r_sio_enable_ms(struct uart_port *port) serial_out(up, UART_IER, up->ier); } -static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status, - struct pt_regs *regs) +static void receive_chars(struct uart_sio_port *up, int *status, + struct pt_regs *regs) { struct tty_struct *tty = up->port.info->tty; unsigned char ch; @@ -400,7 +399,7 @@ static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status, tty_flip_buffer_push(tty); } -static _INLINE_ void transmit_chars(struct uart_sio_port *up) +static void transmit_chars(struct uart_sio_port *up) { struct circ_buf *xmit = &up->port.info->xmit; int count; @@ -1039,6 +1038,14 @@ static inline void wait_for_xmitr(struct uart_sio_port *up) } } +static void m32r_sio_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + wait_for_xmitr(up); + sio_out(up, SIOTXB, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1058,23 +1065,7 @@ static void m32r_sio_console_write(struct console *co, const char *s, ier = sio_in(up, SIOTRCR); sio_out(up, SIOTRCR, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - sio_out(up, SIOTXB, *s); - - if (*s == 10) { - wait_for_xmitr(up); - sio_out(up, SIOTXB, 13); - } - } + uart_console_write(&up->port, s, count, m32r_sio_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 61dd17d7bace..928e6cf12dca 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -603,15 +603,14 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count) udelay(1); /* Write all the chars */ - for ( i=0 ; i<count ; i++ ) { - - /* Send the char */ - out_8(&psc->mpc52xx_psc_buffer_8, *s); - + for (i = 0; i < count; i++, s++) { /* Line return handling */ - if ( *s++ == '\n' ) + if (*s == '\n') out_8(&psc->mpc52xx_psc_buffer_8, '\r'); + /* Send the char */ + out_8(&psc->mpc52xx_psc_buffer_8, *s); + /* Wait the TX buffer to be empty */ j = 20000; /* Maximum wait */ while (!(in_be16(&psc->mpc52xx_psc_status) & diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 9b7ed58cb53b..513ff8597707 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1916,6 +1916,16 @@ static void __exit exit_pmz(void) #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE +static void pmz_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1924,7 +1934,6 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c { struct uart_pmac_port *uap = &pmz_ports[con->index]; unsigned long flags; - int i; if (ZS_IS_ASLEEP(uap)) return; @@ -1934,17 +1943,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); - for (i = 0; i < count; i++) { - /* Wait for the transmit buffer to empty. */ - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, s[i]); - if (s[i] == 10) { - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, R13); - } - } + uart_console_write(&uap->port, s, count, pmz_console_putchar); /* Restore the values in the registers. */ write_zsreg(uap, R1, uap->curregs[1]); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 10535f00301f..77d4568ccc3a 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -619,6 +619,14 @@ static inline void wait_for_xmitr(struct uart_pxa_port *up) } } +static void serial_pxa_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -630,7 +638,6 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) { struct uart_pxa_port *up = &serial_pxa_ports[co->index]; unsigned int ier; - int i; /* * First save the IER then disable the interrupts @@ -638,22 +645,7 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) ier = serial_in(up, UART_IER); serial_out(up, UART_IER, UART_IER_UUE); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, serial_pxa_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 7410e093a6b9..f5aac92fb798 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1066,6 +1066,8 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, port->mapbase = res->start; port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART); port->irq = platform_get_irq(platdev, 0); + if (port->irq < 0) + port->irq = 0; ourport->clk = clk_get(&platdev->dev, "uart"); @@ -1584,25 +1586,19 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) } static void -s3c24xx_serial_console_write(struct console *co, const char *s, - unsigned int count) +s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { - int i; unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); + while (!s3c24xx_serial_console_txrdy(port, ufcon)) + barrier(); + wr_regb(cons_uart, S3C2410_UTXH, ch); +} - for (i = 0; i < count; i++) { - while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon)) - barrier(); - - wr_regb(cons_uart, S3C2410_UTXH, s[i]); - - if (s[i] == '\n') { - while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon)) - barrier(); - - wr_regb(cons_uart, S3C2410_UTXH, '\r'); - } - } +static void +s3c24xx_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); } static void __init diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 2c00b8625852..c2d9068b491d 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -689,6 +689,14 @@ void __init sa1100_register_uart(int idx, int port) #ifdef CONFIG_SERIAL_SA1100_CONSOLE +static void sa1100_console_putchar(struct uart_port *port, int ch) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + while (!(UART_GET_UTSR1(sport) & UTSR1_TNF)) + barrier(); + UART_PUT_CHAR(sport, ch); +} /* * Interrupts are disabled on entering @@ -697,7 +705,7 @@ static void sa1100_console_write(struct console *co, const char *s, unsigned int count) { struct sa1100_port *sport = &sa1100_ports[co->index]; - unsigned int old_utcr3, status, i; + unsigned int old_utcr3, status; /* * First, save UTCR3 and then disable interrupts @@ -706,21 +714,7 @@ sa1100_console_write(struct console *co, const char *s, unsigned int count) UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) | UTCR3_TXE); - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - do { - status = UART_GET_UTSR1(sport); - } while (!(status & UTSR1_TNF)); - UART_PUT_CHAR(sport, s[i]); - if (s[i] == '\n') { - do { - status = UART_GET_UTSR1(sport); - } while (!(status & UTSR1_TNF)); - UART_PUT_CHAR(sport, '\r'); - } - } + uart_console_write(&sport->port, s, count, sa1100_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index cc1faa31d124..fcd7744c4253 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1755,6 +1755,27 @@ static int uart_read_proc(char *page, char **start, off_t off, #ifdef CONFIG_SERIAL_CORE_CONSOLE /* + * uart_console_write - write a console message to a serial port + * @port: the port to write the message + * @s: array of characters + * @count: number of characters in string to write + * @write: function to write character to port + */ +void uart_console_write(struct uart_port *port, const char *s, + unsigned int count, + void (*putchar)(struct uart_port *, int)) +{ + unsigned int i; + + for (i = 0; i < count; i++, s++) { + if (*s == '\n') + putchar(port, '\r'); + putchar(port, *s); + } +} +EXPORT_SYMBOL_GPL(uart_console_write); + +/* * Check whether an invalid uart number has been specified, and * if so, search for the first available port that does have * console support. diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index 04186eaae227..aa521b8e0d4e 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -543,6 +543,12 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { #else # define LH7A40X_CONSOLE &lh7a40x_console +static void lh7a40xuart_console_putchar(struct uart_port *port, int ch) +{ + while (UR(port, UART_R_STATUS) & nTxRdy) + ; + UR(port, UART_R_DATA) = ch; +} static void lh7a40xuart_console_write (struct console* co, const char* s, @@ -556,16 +562,7 @@ static void lh7a40xuart_console_write (struct console* co, UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */ BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */ - for (; count-- > 0; ++s) { - while (UR (port, UART_R_STATUS) & nTxRdy) - ; - UR (port, UART_R_DATA) = *s; - if (*s == '\n') { - while ((UR (port, UART_R_STATUS) & TxBusy)) - ; - UR (port, UART_R_DATA) = '\r'; - } - } + uart_console_write(port, s, count, lh7a40xuart_console_putchar); /* Wait until all characters are sent */ while (UR (port, UART_R_STATUS) & TxBusy) diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index ee98a867bc6d..b848b7d94412 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -33,6 +33,10 @@ * 1.02 Cleanup. (import 8250.c changes) * 1.03 Fix low-latency mode. (import 8250.c changes) * 1.04 Remove usage of deprecated functions, cleanup. + * 1.05 More strict check in verify_port. Cleanup. + * 1.06 Do not insert a char caused previous overrun. + * Fix some spin_locks. + * Do not call uart_add_one_port for absent ports. */ #include <linux/config.h> @@ -57,7 +61,7 @@ #include <asm/io.h> #include <asm/irq.h> -static char *serial_version = "1.04"; +static char *serial_version = "1.06"; static char *serial_name = "TX39/49 Serial driver"; #define PASS_LIMIT 256 @@ -94,6 +98,8 @@ static char *serial_name = "TX39/49 Serial driver"; #define UART_NR 4 #endif +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + struct uart_txx9_port { struct uart_port port; @@ -210,7 +216,7 @@ static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) { switch (up->port.iotype) { default: - return *(volatile u32 *)(up->port.membase + offset); + return __raw_readl(up->port.membase + offset); case UPIO_PORT: return inl(up->port.iobase + offset); } @@ -221,7 +227,7 @@ sio_out(struct uart_txx9_port *up, int offset, int value) { switch (up->port.iotype) { default: - *(volatile u32 *)(up->port.membase + offset) = value; + __raw_writel(value, up->port.membase + offset); break; case UPIO_PORT: outl(value, up->port.iobase + offset); @@ -259,34 +265,19 @@ sio_quot_set(struct uart_txx9_port *up, int quot) static void serial_txx9_stop_tx(struct uart_port *port) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); - spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_txx9_start_tx(struct uart_port *port) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); - spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_txx9_stop_rx(struct uart_port *port) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; -#if 0 - sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_RIE); -#endif - spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_txx9_enable_ms(struct uart_port *port) @@ -302,12 +293,16 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r unsigned int disr = *status; int max_count = 256; char flag; + unsigned int next_ignore_status_mask; do { ch = sio_in(up, TXX9_SIRFIFO); flag = TTY_NORMAL; up->port.icount.rx++; + /* mask out RFDN_MASK bit added by previous overrun */ + next_ignore_status_mask = + up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { /* @@ -328,8 +323,17 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r up->port.icount.parity++; else if (disr & TXX9_SIDISR_UFER) up->port.icount.frame++; - if (disr & TXX9_SIDISR_UOER) + if (disr & TXX9_SIDISR_UOER) { up->port.icount.overrun++; + /* + * The receiver read buffer still hold + * a char which caused overrun. + * Ignore next char by adding RFDN_MASK + * to ignore_status_mask temporarily. + */ + next_ignore_status_mask |= + TXX9_SIDISR_RFDN_MASK; + } /* * Mask off conditions which should be ingored. @@ -349,6 +353,7 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); ignore_char: + up->port.ignore_status_mask = next_ignore_status_mask; disr = sio_in(up, TXX9_SIDISR); } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); spin_unlock(&up->port.lock); @@ -450,14 +455,11 @@ static unsigned int serial_txx9_get_mctrl(struct uart_port *port) static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; - unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); if (mctrl & TIOCM_RTS) sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); else sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); - spin_unlock_irqrestore(&up->port.lock, flags); } static void serial_txx9_break_ctl(struct uart_port *port, int break_state) @@ -784,8 +786,14 @@ static void serial_txx9_config_port(struct uart_port *port, int uflags) static int serial_txx9_verify_port(struct uart_port *port, struct serial_struct *ser) { - if (ser->irq < 0 || - ser->baud_base < 9600 || ser->type != PORT_TXX9) + unsigned long new_port = ser->port; + if (HIGH_BITS_OFFSET) + new_port += (unsigned long)ser->port_high << HIGH_BITS_OFFSET; + if (ser->type != port->type || + ser->irq != port->irq || + ser->io_type != port->iotype || + new_port != port->iobase || + (unsigned long)ser->iomem_base != port->mapbase) return -EINVAL; return 0; } @@ -827,7 +835,8 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv) up->port.line = i; up->port.ops = &serial_txx9_pops; - uart_add_one_port(drv, &up->port); + if (up->port.iobase || up->port.mapbase) + uart_add_one_port(drv, &up->port); } } @@ -854,6 +863,14 @@ static inline void wait_for_xmitr(struct uart_txx9_port *up) } } +static void serial_txx9_console_putchar(struct uart_port *port, int ch) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -865,7 +882,6 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count) { struct uart_txx9_port *up = &serial_txx9_ports[co->index]; unsigned int ier, flcr; - int i; /* * First save the UER then disable the interrupts @@ -879,22 +895,7 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count) if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - sio_out(up, TXX9_SITFIFO, *s); - if (*s == 10) { - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, 13); - } - } + uart_console_write(&up->port, s, count, serial_txx9_console_putchar); /* * Finally, wait for transmitter to become empty @@ -927,11 +928,6 @@ static int serial_txx9_console_setup(struct console *co, char *options) return -ENODEV; /* - * Temporary fix. - */ - spin_lock_init(&port->lock); - - /* * Disable UART interrupts, set DTR and RTS high * and set speed. */ @@ -1041,11 +1037,10 @@ static int __devinit serial_txx9_register_port(struct uart_port *port) mutex_lock(&serial_txx9_mutex); for (i = 0; i < UART_NR; i++) { uart = &serial_txx9_ports[i]; - if (uart->port.type == PORT_UNKNOWN) + if (!(uart->port.iobase || uart->port.mapbase)) break; } if (i < UART_NR) { - uart_remove_one_port(&serial_txx9_reg, &uart->port); uart->port.iobase = port->iobase; uart->port.membase = port->membase; uart->port.irq = port->irq; @@ -1080,9 +1075,8 @@ static void __devexit serial_txx9_unregister_port(int line) uart->port.type = PORT_UNKNOWN; uart->port.iobase = 0; uart->port.mapbase = 0; - uart->port.membase = 0; + uart->port.membase = NULL; uart->port.dev = NULL; - uart_add_one_port(&serial_txx9_reg, &uart->port); mutex_unlock(&serial_txx9_mutex); } @@ -1198,8 +1192,11 @@ static void __exit serial_txx9_exit(void) #ifdef ENABLE_SERIAL_TXX9_PCI pci_unregister_driver(&serial_txx9_pci_driver); #endif - for (i = 0; i < UART_NR; i++) - uart_remove_one_port(&serial_txx9_reg, &serial_txx9_ports[i].port); + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + if (up->port.iobase || up->port.mapbase) + uart_remove_one_port(&serial_txx9_reg, &up->port); + } uart_unregister_driver(&serial_txx9_reg); } diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index a2fb0c2fb121..bfbe9dc90cca 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -861,8 +861,9 @@ static int num_channels; #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE -static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c) +static void sunsab_console_putchar(struct uart_port *port, int c) { + struct uart_sunsab_port *up = (struct uart_sunsab_port *)port; unsigned long flags; spin_lock_irqsave(&up->port.lock, flags); @@ -876,13 +877,8 @@ static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char static void sunsab_console_write(struct console *con, const char *s, unsigned n) { struct uart_sunsab_port *up = &sunsab_ports[con->index]; - int i; - for (i = 0; i < n; i++) { - if (*s == '\n') - sunsab_console_putchar(up, '\r'); - sunsab_console_putchar(up, *s++); - } + uart_console_write(&up->port, s, n, sunsab_console_putchar); sunsab_tec_wait(up); } diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 46c44b83f57c..9fe2283d91e5 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -102,9 +102,7 @@ struct uart_sunsu_port { #endif }; -#define _INLINE_ - -static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset) +static unsigned int serial_in(struct uart_sunsu_port *up, int offset) { offset <<= up->port.regshift; @@ -121,8 +119,7 @@ static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset) } } -static _INLINE_ void -serial_out(struct uart_sunsu_port *up, int offset, int value) +static void serial_out(struct uart_sunsu_port *up, int offset, int value) { #ifndef CONFIG_SPARC64 /* @@ -316,7 +313,7 @@ static void sunsu_enable_ms(struct uart_port *port) spin_unlock_irqrestore(&up->port.lock, flags); } -static _INLINE_ struct tty_struct * +static struct tty_struct * receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs *regs) { struct tty_struct *tty = up->port.info->tty; @@ -395,7 +392,7 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs return tty; } -static _INLINE_ void transmit_chars(struct uart_sunsu_port *up) +static void transmit_chars(struct uart_sunsu_port *up) { struct circ_buf *xmit = &up->port.info->xmit; int count; @@ -431,7 +428,7 @@ static _INLINE_ void transmit_chars(struct uart_sunsu_port *up) __stop_tx(up); } -static _INLINE_ void check_modem_status(struct uart_sunsu_port *up) +static void check_modem_status(struct uart_sunsu_port *up) { int status; @@ -1377,6 +1374,14 @@ static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) } } +static void sunsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1386,7 +1391,6 @@ static void sunsu_console_write(struct console *co, const char *s, { struct uart_sunsu_port *up = &sunsu_ports[co->index]; unsigned int ier; - int i; /* * First save the UER then disable the interrupts @@ -1394,22 +1398,7 @@ static void sunsu_console_write(struct console *co, const char *s, ier = serial_in(up, UART_IER); serial_out(up, UART_IER, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, sunsu_console_putchar); /* * Finally, wait for transmitter to become empty diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 10b35c6f287d..cd49ebbf4a45 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1252,8 +1252,9 @@ static struct zilog_layout __iomem * __init get_zs(int chip, int node) #define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ -static void sunzilog_put_char(struct zilog_channel __iomem *channel, unsigned char ch) +static void sunzilog_putchar(struct uart_port *port, int ch) { + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); int loops = ZS_PUT_CHAR_MAX_DELAY; /* This is a timed polling loop so do not switch the explicit @@ -1284,7 +1285,7 @@ static int sunzilog_serio_write(struct serio *serio, unsigned char ch) spin_lock_irqsave(&sunzilog_serio_lock, flags); - sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch); + sunzilog_putchar(&up->port, ch); spin_unlock_irqrestore(&sunzilog_serio_lock, flags); @@ -1325,16 +1326,10 @@ static void sunzilog_console_write(struct console *con, const char *s, unsigned int count) { struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); unsigned long flags; - int i; spin_lock_irqsave(&up->port.lock, flags); - for (i = 0; i < count; i++, s++) { - sunzilog_put_char(channel, *s); - if (*s == 10) - sunzilog_put_char(channel, 13); - } + uart_console_write(&up->port, s, count, sunzilog_putchar); udelay(2); spin_unlock_irqrestore(&up->port.lock, flags); } diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index d61494d185cd..df5e8713fa31 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -821,25 +821,23 @@ static void wait_for_xmitr(struct uart_port *port) } } +static void siu_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + siu_write(port, UART_TX, ch); +} + static void siu_console_write(struct console *con, const char *s, unsigned count) { struct uart_port *port; uint8_t ier; - unsigned i; port = &siu_uart_ports[con->index]; ier = siu_read(port, UART_IER); siu_write(port, UART_IER, 0); - for (i = 0; i < count && *s != '\0'; i++, s++) { - wait_for_xmitr(port); - siu_write(port, UART_TX, *s); - if (*s == '\n') { - wait_for_xmitr(port); - siu_write(port, UART_TX, '\r'); - } - } + uart_console_write(port, s, count, siu_console_putchar); wait_for_xmitr(port); siu_write(port, UART_IER, ier); @@ -919,7 +917,7 @@ static struct uart_driver siu_uart_driver = { .cons = SERIAL_VR41XX_CONSOLE, }; -static int siu_probe(struct platform_device *dev) +static int __devinit siu_probe(struct platform_device *dev) { struct uart_port *port; int num, i, retval; @@ -953,7 +951,7 @@ static int siu_probe(struct platform_device *dev) return 0; } -static int siu_remove(struct platform_device *dev) +static int __devexit siu_remove(struct platform_device *dev) { struct uart_port *port; int i; @@ -1006,21 +1004,28 @@ static struct platform_device *siu_platform_device; static struct platform_driver siu_device_driver = { .probe = siu_probe, - .remove = siu_remove, + .remove = __devexit_p(siu_remove), .suspend = siu_suspend, .resume = siu_resume, .driver = { .name = "SIU", + .owner = THIS_MODULE, }, }; -static int __devinit vr41xx_siu_init(void) +static int __init vr41xx_siu_init(void) { int retval; - siu_platform_device = platform_device_register_simple("SIU", -1, NULL, 0); - if (IS_ERR(siu_platform_device)) - return PTR_ERR(siu_platform_device); + siu_platform_device = platform_device_alloc("SIU", -1); + if (!siu_platform_device) + return -ENOMEM; + + retval = platform_device_add(siu_platform_device); + if (retval < 0) { + platform_device_put(siu_platform_device); + return retval; + } retval = platform_driver_register(&siu_device_driver); if (retval < 0) @@ -1029,10 +1034,9 @@ static int __devinit vr41xx_siu_init(void) return retval; } -static void __devexit vr41xx_siu_exit(void) +static void __exit vr41xx_siu_exit(void) { platform_driver_unregister(&siu_device_driver); - platform_device_unregister(siu_platform_device); } |