diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/Kconfig | 45 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/amba-pl010.c | 2 | ||||
| -rw-r--r-- | drivers/serial/at91_serial.c | 463 | ||||
| -rw-r--r-- | drivers/serial/ioc4_serial.c | 9 | ||||
| -rw-r--r-- | drivers/serial/mcfserial.c | 28 | ||||
| -rw-r--r-- | drivers/serial/netx-serial.c | 749 | ||||
| -rw-r--r-- | drivers/serial/pxa.c | 1 | ||||
| -rw-r--r-- | drivers/serial/s3c2410.c | 145 | ||||
| -rw-r--r-- | drivers/serial/serial_lh7a40x.c | 13 | ||||
| -rw-r--r-- | drivers/serial/sunhv.c | 35 | ||||
| -rw-r--r-- | drivers/serial/sunsab.c | 12 | ||||
| -rw-r--r-- | drivers/serial/sunsu.c | 8 | ||||
| -rw-r--r-- | drivers/serial/sunzilog.c | 6 |
14 files changed, 1282 insertions, 235 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 7d22dc0478d3..5b48ac22c9c5 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -300,21 +300,22 @@ config SERIAL_AMBA_PL011_CONSOLE kernel at boot time.) config SERIAL_AT91 - bool "AT91RM9200 serial port support" - depends on ARM && ARCH_AT91RM9200 + bool "AT91RM9200 / AT91SAM9261 serial port support" + depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261) select SERIAL_CORE help - This enables the driver for the on-chip UARTs of the AT91RM9200 - processor. + This enables the driver for the on-chip UARTs of the Atmel + AT91RM9200 and AT91SAM926 processor. config SERIAL_AT91_CONSOLE - bool "Support for console on AT91RM9200 serial port" + bool "Support for console on AT91RM9200 / AT91SAM9261 serial port" depends on SERIAL_AT91=y select SERIAL_CORE_CONSOLE help - Say Y here if you wish to use a UART on the AT91RM9200 as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). + Say Y here if you wish to use a UART on the Atmel AT91RM9200 or + AT91SAM9261 as the system console (the system console is the device + which receives all kernel messages and warnings and which allows + logins in single user mode). config SERIAL_AT91_TTYAT bool "Install as device ttyAT0-4 instead of ttyS0-4" @@ -353,21 +354,24 @@ config SERIAL_CLPS711X_CONSOLE kernel at boot time.) config SERIAL_S3C2410 - tristate "Samsung S3C2410 Serial port support" + tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support" depends on ARM && ARCH_S3C2410 select SERIAL_CORE help - Support for the on-chip UARTs on the Samsung S3C2410X CPU, + Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, providing /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of these ports, depending on how the serial port pins are configured. + Currently this driver supports the UARTS on the S3C2410, S3C2440, + S3C2442, S3C2412 and S3C2413 CPUs. + config SERIAL_S3C2410_CONSOLE bool "Support for console on S3C2410 serial port" depends on SERIAL_S3C2410=y select SERIAL_CORE_CONSOLE help - Allow selection of the S3C2410 on-board serial ports for use as + Allow selection of the S3C24XX on-board serial ports for use as an virtual console. Even if you say Y here, the currently visible virtual console @@ -936,4 +940,23 @@ config SERIAL_SGI_IOC3 If you have an SGI Altix with an IOC3 serial card, say Y or M. Otherwise, say N. +config SERIAL_NETX + bool "NetX serial port support" + depends on ARM && ARCH_NETX + select SERIAL_CORE + help + If you have a machine based on a Hilscher NetX SoC you + can enable its onboard serial port by enabling this option. + + To compile this driver as a module, choose M here: the + module will be called netx-serial. + +config SERIAL_NETX_CONSOLE + bool "Console on NetX serial port" + depends on SERIAL_NETX + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Motorola IMX + CPU you can make it the console by answering Y to this option. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 0a71bf68a03f..927faee0362e 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -55,3 +55,4 @@ obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o obj-$(CONFIG_SERIAL_AT91) += at91_serial.o +obj-$(CONFIG_SERIAL_NETX) += netx-serial.o diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 1631414000a2..e920d196d0b1 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -52,7 +52,7 @@ #include <asm/io.h> -#define UART_NR 2 +#define UART_NR 8 #define SERIAL_AMBA_MAJOR 204 #define SERIAL_AMBA_MINOR 16 diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c index 6547fe0cef96..db5b25fafed4 100644 --- a/drivers/serial/at91_serial.c +++ b/drivers/serial/at91_serial.c @@ -2,7 +2,6 @@ * linux/drivers/char/at91_serial.c * * Driver for Atmel AT91RM9200 Serial ports - * * Copyright (C) 2003 Rick Bronson * * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. @@ -30,17 +29,19 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/serial.h> +#include <linux/clk.h> #include <linux/console.h> #include <linux/sysrq.h> #include <linux/tty_flip.h> +#include <linux/platform_device.h> #include <asm/io.h> #include <asm/arch/at91rm9200_usart.h> -#include <asm/mach/serial_at91rm9200.h> +#include <asm/arch/at91rm9200_pdc.h> +#include <asm/mach/serial_at91.h> #include <asm/arch/board.h> -#include <asm/arch/pio.h> - +#include <asm/arch/system.h> #if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -67,7 +68,6 @@ #endif -#define AT91_VA_BASE_DBGU ((unsigned long) AT91_VA_BASE_SYS + AT91_DBGU) #define AT91_ISR_PASS_LIMIT 256 #define UART_PUT_CR(port,v) writel(v, (port)->membase + AT91_US_CR) @@ -87,16 +87,33 @@ /* PDC registers */ #define UART_PUT_PTCR(port,v) writel(v, (port)->membase + AT91_PDC_PTCR) +#define UART_GET_PTSR(port) readl((port)->membase + AT91_PDC_PTSR) + #define UART_PUT_RPR(port,v) writel(v, (port)->membase + AT91_PDC_RPR) +#define UART_GET_RPR(port) readl((port)->membase + AT91_PDC_RPR) #define UART_PUT_RCR(port,v) writel(v, (port)->membase + AT91_PDC_RCR) -#define UART_GET_RCR(port) readl((port)->membase + AT91_PDC_RCR) #define UART_PUT_RNPR(port,v) writel(v, (port)->membase + AT91_PDC_RNPR) #define UART_PUT_RNCR(port,v) writel(v, (port)->membase + AT91_PDC_RNCR) +#define UART_PUT_TPR(port,v) writel(v, (port)->membase + AT91_PDC_TPR) +#define UART_PUT_TCR(port,v) writel(v, (port)->membase + AT91_PDC_TCR) +//#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + AT91_PDC_TNPR) +//#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + AT91_PDC_TNCR) static int (*at91_open)(struct uart_port *); static void (*at91_close)(struct uart_port *); +/* + * We wrap our port structure around the generic uart_port. + */ +struct at91_uart_port { + struct uart_port uart; /* uart */ + struct clk *clk; /* uart clock */ + unsigned short suspended; /* is port suspended? */ +}; + +static struct at91_uart_port at91_ports[AT91_NR_UART]; + #ifdef SUPPORT_SYSRQ static struct console at91_console; #endif @@ -115,16 +132,19 @@ static u_int at91_tx_empty(struct uart_port *port) static void at91_set_mctrl(struct uart_port *port, u_int mctrl) { unsigned int control = 0; + unsigned int mode; - /* - * Errata #39: RTS0 is not internally connected to PA21. We need to drive - * the pin manually. - */ - if (port->mapbase == AT91_VA_BASE_US0) { - if (mctrl & TIOCM_RTS) - at91_sys_write(AT91_PIOA + PIO_CODR, AT91_PA21_RTS0); - else - at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0); + if (arch_identify() == ARCH_ID_AT91RM9200) { + /* + * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21. + * We need to drive the pin manually. + */ + if (port->mapbase == AT91_BASE_US0) { + if (mctrl & TIOCM_RTS) + at91_sys_write(AT91_PIOA + PIO_CODR, AT91_PA21_RTS0); + else + at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0); + } } if (mctrl & TIOCM_RTS) @@ -137,7 +157,15 @@ static void at91_set_mctrl(struct uart_port *port, u_int mctrl) else control |= AT91_US_DTRDIS; - UART_PUT_CR(port,control); + UART_PUT_CR(port, control); + + /* Local loopback mode? */ + mode = UART_GET_MR(port) & ~AT91_US_CHMODE; + if (mctrl & TIOCM_LOOP) + mode |= AT91_US_CHMODE_LOC_LOOP; + else + mode |= AT91_US_CHMODE_NORMAL; + UART_PUT_MR(port, mode); } /* @@ -169,8 +197,9 @@ static u_int at91_get_mctrl(struct uart_port *port) */ static void at91_stop_tx(struct uart_port *port) { + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; + UART_PUT_IDR(port, AT91_US_TXRDY); - port->read_status_mask &= ~AT91_US_TXRDY; } /* @@ -178,7 +207,8 @@ static void at91_stop_tx(struct uart_port *port) */ static void at91_start_tx(struct uart_port *port) { - port->read_status_mask |= AT91_US_TXRDY; + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; + UART_PUT_IER(port, AT91_US_TXRDY); } @@ -187,6 +217,8 @@ static void at91_start_tx(struct uart_port *port) */ static void at91_stop_rx(struct uart_port *port) { + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; + UART_PUT_IDR(port, AT91_US_RXRDY); } @@ -195,7 +227,6 @@ static void at91_stop_rx(struct uart_port *port) */ static void at91_enable_ms(struct uart_port *port) { - port->read_status_mask |= (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC); UART_PUT_IER(port, AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC); } @@ -218,8 +249,8 @@ static void at91_rx_chars(struct uart_port *port, struct pt_regs *regs) struct tty_struct *tty = port->info->tty; unsigned int status, ch, flg; - status = UART_GET_CSR(port) & port->read_status_mask; - while (status & (AT91_US_RXRDY)) { + status = UART_GET_CSR(port); + while (status & AT91_US_RXRDY) { ch = UART_GET_CHAR(port); port->icount.rx++; @@ -230,40 +261,38 @@ static void at91_rx_chars(struct uart_port *port, struct pt_regs *regs) * note that the error handling code is * out of the main execution path */ - if (unlikely(status & (AT91_US_PARE | AT91_US_FRAME | AT91_US_OVRE))) { + if (unlikely(status & (AT91_US_PARE | AT91_US_FRAME | AT91_US_OVRE | AT91_US_RXBRK))) { UART_PUT_CR(port, AT91_US_RSTSTA); /* clear error */ - if (status & (AT91_US_PARE)) + if (status & AT91_US_RXBRK) { + status &= ~(AT91_US_PARE | AT91_US_FRAME); /* ignore side-effect */ + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } + if (status & AT91_US_PARE) port->icount.parity++; - if (status & (AT91_US_FRAME)) + if (status & AT91_US_FRAME) port->icount.frame++; - if (status & (AT91_US_OVRE)) + if (status & AT91_US_OVRE) port->icount.overrun++; - if (status & AT91_US_PARE) + status &= port->read_status_mask; + + if (status & AT91_US_RXBRK) + flg = TTY_BREAK; + else if (status & AT91_US_PARE) flg = TTY_PARITY; else if (status & AT91_US_FRAME) flg = TTY_FRAME; - if (status & AT91_US_OVRE) { - /* - * overrun does *not* affect the character - * we read from the FIFO - */ - tty_insert_flip_char(tty, ch, flg); - ch = 0; - flg = TTY_OVERRUN; - } -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif } if (uart_handle_sysrq_char(port, ch, regs)) goto ignore_char; - tty_insert_flip_char(tty, ch, flg); + uart_insert_char(port, status, AT91_US_OVRE, ch, flg); ignore_char: - status = UART_GET_CSR(port) & port->read_status_mask; + status = UART_GET_CSR(port); } tty_flip_buffer_push(tty); @@ -308,40 +337,35 @@ static void at91_tx_chars(struct uart_port *port) static irqreturn_t at91_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct uart_port *port = dev_id; + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; unsigned int status, pending, pass_counter = 0; status = UART_GET_CSR(port); - pending = status & port->read_status_mask; - if (pending) { - do { - if (pending & AT91_US_RXRDY) - at91_rx_chars(port, regs); - - /* Clear the relevent break bits */ - if (pending & AT91_US_RXBRK) { - UART_PUT_CR(port, AT91_US_RSTSTA); - port->icount.brk++; - uart_handle_break(port); - } + pending = status & UART_GET_IMR(port); + while (pending) { + /* Interrupt receive */ + if (pending & AT91_US_RXRDY) + at91_rx_chars(port, regs); + + // TODO: All reads to CSR will clear these interrupts! + if (pending & AT91_US_RIIC) port->icount.rng++; + if (pending & AT91_US_DSRIC) port->icount.dsr++; + if (pending & AT91_US_DCDIC) + uart_handle_dcd_change(port, !(status & AT91_US_DCD)); + if (pending & AT91_US_CTSIC) + uart_handle_cts_change(port, !(status & AT91_US_CTS)); + if (pending & (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC)) + wake_up_interruptible(&port->info->delta_msr_wait); + + /* Interrupt transmit */ + if (pending & AT91_US_TXRDY) + at91_tx_chars(port); + + if (pass_counter++ > AT91_ISR_PASS_LIMIT) + break; - // TODO: All reads to CSR will clear these interrupts! - if (pending & AT91_US_RIIC) port->icount.rng++; - if (pending & AT91_US_DSRIC) port->icount.dsr++; - if (pending & AT91_US_DCDIC) - uart_handle_dcd_change(port, !(status & AT91_US_DCD)); - if (pending & AT91_US_CTSIC) - uart_handle_cts_change(port, !(status & AT91_US_CTS)); - if (pending & (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC)) - wake_up_interruptible(&port->info->delta_msr_wait); - - if (pending & AT91_US_TXRDY) - at91_tx_chars(port); - if (pass_counter++ > AT91_ISR_PASS_LIMIT) - break; - - status = UART_GET_CSR(port); - pending = status & port->read_status_mask; - } while (pending); + status = UART_GET_CSR(port); + pending = status & UART_GET_IMR(port); } return IRQ_HANDLED; } @@ -351,6 +375,7 @@ static irqreturn_t at91_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ static int at91_startup(struct uart_port *port) { + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; int retval; /* @@ -381,14 +406,14 @@ static int at91_startup(struct uart_port *port) } } - port->read_status_mask = AT91_US_RXRDY | AT91_US_TXRDY | AT91_US_OVRE - | AT91_US_FRAME | AT91_US_PARE | AT91_US_RXBRK; /* * Finally, enable the serial port */ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX); UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); /* enable xmit & rcvr */ - UART_PUT_IER(port, AT91_US_RXRDY); /* do receive only */ + + UART_PUT_IER(port, AT91_US_RXRDY); /* enable receive only */ + return 0; } @@ -397,6 +422,8 @@ static int at91_startup(struct uart_port *port) */ static void at91_shutdown(struct uart_port *port) { + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; + /* * Disable all interrupts, port and break condition. */ @@ -421,21 +448,22 @@ static void at91_shutdown(struct uart_port *port) */ static void at91_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; + switch (state) { case 0: /* * Enable the peripheral clock for this serial port. * This is called on uart_open() or a resume event. */ - at91_sys_write(AT91_PMC_PCER, 1 << port->irq); + clk_enable(at91_port->clk); break; case 3: /* * Disable the peripheral clock for this serial port. * This is called on uart_close() or a suspend event. */ - if (port->irq != AT91_ID_SYS) /* is this a shared clock? */ - at91_sys_write(AT91_PMC_PCDR, 1 << port->irq); + clk_disable(at91_port->clk); break; default: printk(KERN_ERR "at91_serial: unknown pm %d\n", state); @@ -494,9 +522,9 @@ static void at91_set_termios(struct uart_port *port, struct termios * termios, s spin_lock_irqsave(&port->lock, flags); - port->read_status_mask |= AT91_US_OVRE; + port->read_status_mask = AT91_US_OVRE; if (termios->c_iflag & INPCK) - port->read_status_mask |= AT91_US_FRAME | AT91_US_PARE; + port->read_status_mask |= (AT91_US_FRAME | AT91_US_PARE); if (termios->c_iflag & (BRKINT | PARMRK)) port->read_status_mask |= AT91_US_RXBRK; @@ -552,7 +580,7 @@ static void at91_set_termios(struct uart_port *port, struct termios * termios, s */ static const char *at91_type(struct uart_port *port) { - return (port->type == PORT_AT91RM9200) ? "AT91_SERIAL" : NULL; + return (port->type == PORT_AT91) ? "AT91_SERIAL" : NULL; } /* @@ -560,8 +588,15 @@ static const char *at91_type(struct uart_port *port) */ static void at91_release_port(struct uart_port *port) { - release_mem_region(port->mapbase, - (port->mapbase == AT91_VA_BASE_DBGU) ? 512 : SZ_16K); + struct platform_device *pdev = to_platform_device(port->dev); + int size = pdev->resource[0].end - pdev->resource[0].start + 1; + + release_mem_region(port->mapbase, size); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } } /* @@ -569,10 +604,21 @@ static void at91_release_port(struct uart_port *port) */ static int at91_request_port(struct uart_port *port) { - return request_mem_region(port->mapbase, - (port->mapbase == AT91_VA_BASE_DBGU) ? 512 : SZ_16K, - "at91_serial") != NULL ? 0 : -EBUSY; + struct platform_device *pdev = to_platform_device(port->dev); + int size = pdev->resource[0].end - pdev->resource[0].start + 1; + + if (!request_mem_region(port->mapbase, size, "at91_serial")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + return 0; } /* @@ -581,7 +627,7 @@ static int at91_request_port(struct uart_port *port) static void at91_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) { - port->type = PORT_AT91RM9200; + port->type = PORT_AT91; at91_request_port(port); } } @@ -592,7 +638,7 @@ static void at91_config_port(struct uart_port *port, int flags) static int at91_verify_port(struct uart_port *port, struct serial_struct *ser) { int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_AT91RM9200) + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AT91) ret = -EINVAL; if (port->irq != ser->irq) ret = -EINVAL; @@ -624,33 +670,47 @@ static struct uart_ops at91_pops = { .type = at91_type, .release_port = at91_release_port, .request_port = at91_request_port, - .config_port = at91_config_port, - .verify_port = at91_verify_port, + .config_port = at91_config_port, + .verify_port = at91_verify_port, .pm = at91_serial_pm, }; -static struct uart_port at91_ports[AT91_NR_UART]; - -void __init at91_init_ports(void) +/* + * Configure the port from the platform device resource info. + */ +static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev) { - static int first = 1; - int i; - - if (!first) - return; - first = 0; + struct uart_port *port = &at91_port->uart; + struct at91_uart_data *data = pdev->dev.platform_data; + + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &at91_pops; + port->fifosize = 1; + port->line = pdev->id; + port->dev = &pdev->dev; + + port->mapbase = pdev->resource[0].start; + port->irq = pdev->resource[1].start; + + if (port->mapbase == AT91_VA_BASE_SYS + AT91_DBGU) /* Part of system perpherals - already mapped */ + port->membase = (void __iomem *) port->mapbase; + else { + port->flags |= UPF_IOREMAP; + port->membase = NULL; + } - for (i = 0; i < AT91_NR_UART; i++) { - at91_ports[i].iotype = UPIO_MEM; - at91_ports[i].flags = UPF_BOOT_AUTOCONF; - at91_ports[i].uartclk = at91_master_clock; - at91_ports[i].ops = &at91_pops; - at91_ports[i].fifosize = 1; - at91_ports[i].line = i; - } + if (!at91_port->clk) { /* for console, the clock could already be configured */ + at91_port->clk = clk_get(&pdev->dev, "usart"); + clk_enable(at91_port->clk); + port->uartclk = clk_get_rate(at91_port->clk); + } } -void __init at91_register_uart_fns(struct at91rm9200_port_fns *fns) +/* + * Register board-specific modem-control line handlers. + */ +void __init at91_register_uart_fns(struct at91_port_fns *fns) { if (fns->enable_ms) at91_pops.enable_ms = fns->enable_ms; @@ -664,51 +724,6 @@ void __init at91_register_uart_fns(struct at91rm9200_port_fns *fns) at91_pops.set_wake = fns->set_wake; } -/* - * Setup ports. - */ -void __init at91_register_uart(int idx, int port) -{ - if ((idx < 0) || (idx >= AT91_NR_UART)) { - printk(KERN_ERR "%s: bad index number %d\n", __FUNCTION__, idx); - return; - } - - switch (port) { - case 0: - at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US0; - at91_ports[idx].mapbase = AT91_VA_BASE_US0; - at91_ports[idx].irq = AT91_ID_US0; - AT91_CfgPIO_USART0(); - break; - case 1: - at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US1; - at91_ports[idx].mapbase = AT91_VA_BASE_US1; - at91_ports[idx].irq = AT91_ID_US1; - AT91_CfgPIO_USART1(); - break; - case 2: - at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US2; - at91_ports[idx].mapbase = AT91_VA_BASE_US2; - at91_ports[idx].irq = AT91_ID_US2; - AT91_CfgPIO_USART2(); - break; - case 3: - at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_US3; - at91_ports[idx].mapbase = AT91_VA_BASE_US3; - at91_ports[idx].irq = AT91_ID_US3; - AT91_CfgPIO_USART3(); - break; - case 4: - at91_ports[idx].membase = (void __iomem *) AT91_VA_BASE_DBGU; - at91_ports[idx].mapbase = AT91_VA_BASE_DBGU; - at91_ports[idx].irq = AT91_ID_SYS; - AT91_CfgPIO_DBGU(); - break; - default: - printk(KERN_ERR "%s : bad port number %d\n", __FUNCTION__, port); - } -} #ifdef CONFIG_SERIAL_AT91_CONSOLE static void at91_console_putchar(struct uart_port *port, int ch) @@ -723,7 +738,7 @@ static void at91_console_putchar(struct uart_port *port, int ch) */ static void at91_console_write(struct console *co, const char *s, u_int count) { - struct uart_port *port = at91_ports + co->index; + struct uart_port *port = &at91_ports[co->index].uart; unsigned int status, imr; /* @@ -778,23 +793,15 @@ static void __init at91_console_get_options(struct uart_port *port, int *baud, i static int __init at91_console_setup(struct console *co, char *options) { - struct uart_port *port; + struct uart_port *port = &at91_ports[co->index].uart; int baud = 115200; int bits = 8; int parity = 'n'; int flow = 'n'; - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - port = uart_get_console(at91_ports, AT91_NR_UART, co); + if (port->membase == 0) /* Port not initialized yet - delay setup */ + return -ENODEV; - /* - * Enable the serial console, in-case bootloader did not do it. - */ - at91_sys_write(AT91_PMC_PCER, 1 << port->irq); /* enable clock */ UART_PUT_IDR(port, -1); /* disable interrupts */ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX); UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); @@ -821,23 +828,40 @@ static struct console at91_console = { #define AT91_CONSOLE_DEVICE &at91_console -static int __init at91_console_init(void) +/* + * Early console initialization (before VM subsystem initialized). + */ +static int __init at91_console_init(void) { - at91_init_ports(); + if (at91_default_console_device) { + add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL); + at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device); + register_console(&at91_console); + } - at91_console.index = at91_console_port; - register_console(&at91_console); return 0; } console_initcall(at91_console_init); +/* + * Late console initialization. + */ +static int __init at91_late_console_init(void) +{ + if (at91_default_console_device && !(at91_console.flags & CON_ENABLED)) + register_console(&at91_console); + + return 0; +} +core_initcall(at91_late_console_init); + #else #define AT91_CONSOLE_DEVICE NULL #endif static struct uart_driver at91_uart = { .owner = THIS_MODULE, - .driver_name = AT91_DEVICENAME, + .driver_name = "at91_serial", .dev_name = AT91_DEVICENAME, .devfs_name = AT91_DEVICENAME, .major = SERIAL_AT91_MAJOR, @@ -846,33 +870,106 @@ static struct uart_driver at91_uart = { .cons = AT91_CONSOLE_DEVICE, }; -static int __init at91_serial_init(void) +#ifdef CONFIG_PM +static int at91_serial_suspend(struct platform_device *pdev, pm_message_t state) { - int ret, i; + struct uart_port *port = platform_get_drvdata(pdev); + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; + + if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock()) + enable_irq_wake(port->irq); + else { + disable_irq_wake(port->irq); + uart_suspend_port(&at91_uart, port); + at91_port->suspended = 1; + } - at91_init_ports(); + return 0; +} - ret = uart_register_driver(&at91_uart); - if (ret) - return ret; +static int at91_serial_resume(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; - for (i = 0; i < AT91_NR_UART; i++) { - if (at91_serial_map[i] >= 0) - uart_add_one_port(&at91_uart, &at91_ports[i]); + if (at91_port->suspended) { + uart_resume_port(&at91_uart, port); + at91_port->suspended = 0; } return 0; } +#else +#define at91_serial_suspend NULL +#define at91_serial_resume NULL +#endif -static void __exit at91_serial_exit(void) +static int __devinit at91_serial_probe(struct platform_device *pdev) { - int i; + struct at91_uart_port *port; + int ret; - for (i = 0; i < AT91_NR_UART; i++) { - if (at91_serial_map[i] >= 0) - uart_remove_one_port(&at91_uart, &at91_ports[i]); - } + port = &at91_ports[pdev->id]; + at91_init_port(port, pdev); + ret = uart_add_one_port(&at91_uart, &port->uart); + if (!ret) { + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, port); + } + + return ret; +} + +static int __devexit at91_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct at91_uart_port *at91_port = (struct at91_uart_port *) port; + int ret = 0; + + clk_disable(at91_port->clk); + clk_put(at91_port->clk); + + device_init_wakeup(&pdev->dev, 0); + platform_set_drvdata(pdev, NULL); + + if (port) { + ret = uart_remove_one_port(&at91_uart, port); + kfree(port); + } + + return ret; +} + +static struct platform_driver at91_serial_driver = { + .probe = at91_serial_probe, + .remove = __devexit_p(at91_serial_remove), + .suspend = at91_serial_suspend, + .resume = at91_serial_resume, + .driver = { + .name = "at91_usart", + .owner = THIS_MODULE, + }, +}; + +static int __init at91_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&at91_uart); + if (ret) + return ret; + + ret = platform_driver_register(&at91_serial_driver); + if (ret) + uart_unregister_driver(&at91_uart); + + return ret; +} + +static void __exit at91_serial_exit(void) +{ + platform_driver_unregister(&at91_serial_driver); uart_unregister_driver(&at91_uart); } diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index c620209d7b9a..717e47bbd784 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -2646,7 +2646,10 @@ static int ioc4_serial_remove_one(struct ioc4_driver_data *idd) struct ioc4_port *port; struct ioc4_soft *soft; + /* If serial driver did not attach, don't try to detach */ control = idd->idd_serial_data; + if (!control) + return 0; for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { for (port_type = UART_PORT_MIN; @@ -2778,6 +2781,12 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, idd->idd_pci_id)); + /* PCI-RT does not bring out serial connections. + * Do not attach to this particular IOC4. + */ + if (idd->idd_variant == IOC4_VARIANT_PCI_RT) + return 0; + /* request serial registers */ tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET; diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c index 8cbbb954df2c..8ad242934368 100644 --- a/drivers/serial/mcfserial.c +++ b/drivers/serial/mcfserial.c @@ -60,11 +60,11 @@ struct timer_list mcfrs_timer_struct; #if defined(CONFIG_HW_FEITH) #define CONSOLE_BAUD_RATE 38400 #define DEFAULT_CBAUD B38400 -#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) +#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || defined(CONFIG_M5329EVB) #define CONSOLE_BAUD_RATE 115200 #define DEFAULT_CBAUD B115200 #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \ - defined(CONFIG_senTec) || defined(CONFIG_SNEHA) + defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET) #define CONSOLE_BAUD_RATE 19200 #define DEFAULT_CBAUD B19200 #endif @@ -93,7 +93,7 @@ static struct tty_driver *mcfrs_serial_driver; #undef SERIAL_DEBUG_FLOW #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) + defined(CONFIG_M520x) || defined(CONFIG_M532x) #define IRQBASE (MCFINT_VECBASE+MCFINT_UART0) #else #define IRQBASE 73 @@ -1545,6 +1545,28 @@ static void mcfrs_irqinit(struct mcf_serial *info) *feci2c_par |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; } +#elif defined(CONFIG_M532x) + volatile unsigned char *uartp; + uartp = info->addr; + switch (info->line) { + case 0: + MCF_INTC0_ICR26 = 0x3; + MCF_INTC0_CIMR = 26; + /* GPIO initialization */ + MCF_GPIO_PAR_UART |= 0x000F; + break; + case 1: + MCF_INTC0_ICR27 = 0x3; + MCF_INTC0_CIMR = 27; + /* GPIO initialization */ + MCF_GPIO_PAR_UART |= 0x0FF0; + break; + case 2: + MCF_INTC0_ICR28 = 0x3; + MCF_INTC0_CIMR = 28; + /* GPIOs also must be initalized, depends on board */ + break; + } #else volatile unsigned char *icrp, *uartp; diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c new file mode 100644 index 000000000000..c1adc9e4b239 --- /dev/null +++ b/drivers/serial/netx-serial.c @@ -0,0 +1,749 @@ +/* + * drivers/serial/netx-serial.c + * + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> + +#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/platform_device.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/serial.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/hardware.h> +#include <asm/arch/netx-regs.h> + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_NX_MAJOR 204 +#define MINOR_START 170 + +#ifdef CONFIG_SERIAL_NETX_CONSOLE + +enum uart_regs { + UART_DR = 0x00, + UART_SR = 0x04, + UART_LINE_CR = 0x08, + UART_BAUDDIV_MSB = 0x0c, + UART_BAUDDIV_LSB = 0x10, + UART_CR = 0x14, + UART_FR = 0x18, + UART_IIR = 0x1c, + UART_ILPR = 0x20, + UART_RTS_CR = 0x24, + UART_RTS_LEAD = 0x28, + UART_RTS_TRAIL = 0x2c, + UART_DRV_ENABLE = 0x30, + UART_BRM_CR = 0x34, + UART_RXFIFO_IRQLEVEL = 0x38, + UART_TXFIFO_IRQLEVEL = 0x3c, +}; + +#define SR_FE (1<<0) +#define SR_PE (1<<1) +#define SR_BE (1<<2) +#define SR_OE (1<<3) + +#define LINE_CR_BRK (1<<0) +#define LINE_CR_PEN (1<<1) +#define LINE_CR_EPS (1<<2) +#define LINE_CR_STP2 (1<<3) +#define LINE_CR_FEN (1<<4) +#define LINE_CR_5BIT (0<<5) +#define LINE_CR_6BIT (1<<5) +#define LINE_CR_7BIT (2<<5) +#define LINE_CR_8BIT (3<<5) +#define LINE_CR_BITS_MASK (3<<5) + +#define CR_UART_EN (1<<0) +#define CR_SIREN (1<<1) +#define CR_SIRLP (1<<2) +#define CR_MSIE (1<<3) +#define CR_RIE (1<<4) +#define CR_TIE (1<<5) +#define CR_RTIE (1<<6) +#define CR_LBE (1<<7) + +#define FR_CTS (1<<0) +#define FR_DSR (1<<1) +#define FR_DCD (1<<2) +#define FR_BUSY (1<<3) +#define FR_RXFE (1<<4) +#define FR_TXFF (1<<5) +#define FR_RXFF (1<<6) +#define FR_TXFE (1<<7) + +#define IIR_MIS (1<<0) +#define IIR_RIS (1<<1) +#define IIR_TIS (1<<2) +#define IIR_RTIS (1<<3) +#define IIR_MASK 0xf + +#define RTS_CR_AUTO (1<<0) +#define RTS_CR_RTS (1<<1) +#define RTS_CR_COUNT (1<<2) +#define RTS_CR_MOD2 (1<<3) +#define RTS_CR_RTS_POL (1<<4) +#define RTS_CR_CTS_CTR (1<<5) +#define RTS_CR_CTS_POL (1<<6) +#define RTS_CR_STICK (1<<7) + +#define UART_PORT_SIZE 0x40 +#define DRIVER_NAME "netx-uart" + +struct netx_port { + struct uart_port port; +}; + +static void netx_stop_tx(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val & ~CR_TIE, port->membase + UART_CR); +} + +static void netx_stop_rx(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val & ~CR_RIE, port->membase + UART_CR); +} + +static void netx_enable_ms(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val | CR_MSIE, port->membase + UART_CR); +} + +static inline void netx_transmit_buffer(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + if (port->x_char) { + writel(port->x_char, port->membase + UART_DR); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { + netx_stop_tx(port); + return; + } + + do { + /* send xmit->buf[xmit->tail] + * out the port here */ + writel(xmit->buf[xmit->tail], port->membase + UART_DR); + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (!(readl(port->membase + UART_FR) & FR_TXFF)); + + if (uart_circ_empty(xmit)) + netx_stop_tx(port); +} + +static void netx_start_tx(struct uart_port *port) +{ + writel( + readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR); + + if (!(readl(port->membase + UART_FR) & FR_TXFF)) + netx_transmit_buffer(port); +} + +static unsigned int netx_tx_empty(struct uart_port *port) +{ + return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT; +} + +static void netx_txint(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + netx_stop_tx(port); + return; + } + + netx_transmit_buffer(port); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void netx_rxint(struct uart_port *port, struct pt_regs *regs) +{ + unsigned char rx, flg, status; + struct tty_struct *tty = port->info->tty; + + while (!(readl(port->membase + UART_FR) & FR_RXFE)) { + rx = readl(port->membase + UART_DR); + flg = TTY_NORMAL; + port->icount.rx++; + status = readl(port->membase + UART_SR); + if (status & SR_BE) { + writel(0, port->membase + UART_SR); + if (uart_handle_break(port)) + continue; + } + + if (unlikely(status & (SR_FE | SR_PE | SR_OE))) { + + if (status & SR_PE) + port->icount.parity++; + else if (status & SR_FE) + port->icount.frame++; + if (status & SR_OE) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & SR_BE) + flg = TTY_BREAK; + else if (status & SR_PE) + flg = TTY_PARITY; + else if (status & SR_FE) + flg = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, rx, regs)) + continue; + + uart_insert_char(port, status, SR_OE, rx, flg); + } + + tty_flip_buffer_push(tty); + return; +} + +static irqreturn_t netx_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = (struct uart_port *)dev_id; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&port->lock,flags); + + status = readl(port->membase + UART_IIR) & IIR_MASK; + while (status) { + if (status & IIR_RIS) + netx_rxint(port, regs); + if (status & IIR_TIS) + netx_txint(port); + if (status & IIR_MIS) { + if (readl(port->membase + UART_FR) & FR_CTS) + uart_handle_cts_change(port, 1); + else + uart_handle_cts_change(port, 0); + } + writel(0, port->membase + UART_IIR); + status = readl(port->membase + UART_IIR) & IIR_MASK; + } + + spin_unlock_irqrestore(&port->lock,flags); + return IRQ_HANDLED; +} + +static unsigned int netx_get_mctrl(struct uart_port *port) +{ + unsigned int ret = TIOCM_DSR | TIOCM_CAR; + + if (readl(port->membase + UART_FR) & FR_CTS) + ret |= TIOCM_CTS; + + return ret; +} + +static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int val; + + if (mctrl & TIOCM_RTS) { + val = readl(port->membase + UART_RTS_CR); + writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR); + } +} + +static void netx_break_ctl(struct uart_port *port, int break_state) +{ + unsigned int line_cr; + spin_lock_irq(&port->lock); + + line_cr = readl(port->membase + UART_LINE_CR); + if (break_state != 0) + line_cr |= LINE_CR_BRK; + else + line_cr &= ~LINE_CR_BRK; + writel(line_cr, port->membase + UART_LINE_CR); + + spin_unlock_irq(&port->lock); +} + +static int netx_startup(struct uart_port *port) +{ + int ret; + + ret = request_irq(port->irq, netx_int, 0, + DRIVER_NAME, port); + if (ret) { + dev_err(port->dev, "unable to grab irq%d\n",port->irq); + goto exit; + } + + writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN, + port->membase + UART_LINE_CR); + + writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN, + port->membase + UART_CR); + +exit: + return ret; +} + +static void netx_shutdown(struct uart_port *port) +{ + writel(0, port->membase + UART_CR) ; + + free_irq(port->irq, port); +} + +static void +netx_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned int baud, quot; + unsigned char old_cr; + unsigned char line_cr = LINE_CR_FEN; + unsigned char rts_cr = 0; + + switch (termios->c_cflag & CSIZE) { + case CS5: + line_cr |= LINE_CR_5BIT; + break; + case CS6: + line_cr |= LINE_CR_6BIT; + break; + case CS7: + line_cr |= LINE_CR_7BIT; + break; + case CS8: + line_cr |= LINE_CR_8BIT; + break; + } + + if (termios->c_cflag & CSTOPB) + line_cr |= LINE_CR_STP2; + + if (termios->c_cflag & PARENB) { + line_cr |= LINE_CR_PEN; + if (!(termios->c_cflag & PARODD)) + line_cr |= LINE_CR_EPS; + } + + if (termios->c_cflag & CRTSCTS) + rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = baud * 4096; + quot /= 1000; + quot *= 256; + quot /= 100000; + + spin_lock_irq(&port->lock); + + uart_update_timeout(port, termios->c_cflag, baud); + + old_cr = readl(port->membase + UART_CR); + + /* disable interrupts */ + writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE), + port->membase + UART_CR); + + /* drain transmitter */ + while (readl(port->membase + UART_FR) & FR_BUSY); + + /* disable UART */ + writel(old_cr & ~CR_UART_EN, port->membase + UART_CR); + + /* modem status interrupts */ + old_cr &= ~CR_MSIE; + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= CR_MSIE; + + writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB); + writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB); + writel(line_cr, port->membase + UART_LINE_CR); + + writel(rts_cr, port->membase + UART_RTS_CR); + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= SR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SR_PE; + } + + port->read_status_mask = 0; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SR_BE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SR_PE | SR_FE; + + writel(old_cr, port->membase + UART_CR); + + spin_unlock_irq(&port->lock); +} + +static const char *netx_type(struct uart_port *port) +{ + return port->type == PORT_NETX ? "NETX" : NULL; +} + +static void netx_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +static int netx_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, + DRIVER_NAME) != NULL ? 0 : -EBUSY; +} + +static void netx_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0) + port->type = PORT_NETX; +} + +static int +netx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX) + ret = -EINVAL; + + return ret; +} + +static struct uart_ops netx_pops = { + .tx_empty = netx_tx_empty, + .set_mctrl = netx_set_mctrl, + .get_mctrl = netx_get_mctrl, + .stop_tx = netx_stop_tx, + .start_tx = netx_start_tx, + .stop_rx = netx_stop_rx, + .enable_ms = netx_enable_ms, + .break_ctl = netx_break_ctl, + .startup = netx_startup, + .shutdown = netx_shutdown, + .set_termios = netx_set_termios, + .type = netx_type, + .release_port = netx_release_port, + .request_port = netx_request_port, + .config_port = netx_config_port, + .verify_port = netx_verify_port, +}; + +static struct netx_port netx_ports[] = { + { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART0), + .mapbase = NETX_PA_UART0, + .irq = NETX_IRQ_UART0, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 0, + }, + }, { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART1), + .mapbase = NETX_PA_UART1, + .irq = NETX_IRQ_UART1, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 1, + }, + }, { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART2), + .mapbase = NETX_PA_UART2, + .irq = NETX_IRQ_UART2, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 2, + }, + } +}; + +static void netx_console_putchar(struct uart_port *port, int ch) +{ + while (readl(port->membase + UART_FR) & FR_BUSY); + writel(ch, port->membase + UART_DR); +} + +static void +netx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &netx_ports[co->index].port; + unsigned char cr_save; + + cr_save = readl(port->membase + UART_CR); + writel(cr_save | CR_UART_EN, port->membase + UART_CR); + + uart_console_write(port, s, count, netx_console_putchar); + + while (readl(port->membase + UART_FR) & FR_BUSY); + writel(cr_save, port->membase + UART_CR); +} + +static void __init +netx_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits, int *flow) +{ + unsigned char line_cr; + + *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) | + readl(port->membase + UART_BAUDDIV_LSB); + *baud *= 1000; + *baud /= 4096; + *baud *= 1000; + *baud /= 256; + *baud *= 100; + + line_cr = readl(port->membase + UART_LINE_CR); + *parity = 'n'; + if (line_cr & LINE_CR_PEN) { + if (line_cr & LINE_CR_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + switch (line_cr & LINE_CR_BITS_MASK) { + case LINE_CR_8BIT: + *bits = 8; + break; + case LINE_CR_7BIT: + *bits = 7; + break; + case LINE_CR_6BIT: + *bits = 6; + break; + case LINE_CR_5BIT: + *bits = 5; + break; + } + + if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO) + *flow = 'r'; +} + +static int __init +netx_console_setup(struct console *co, char *options) +{ + struct netx_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports)) + co->index = 0; + sport = &netx_ports[co->index]; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + } else { + /* if the UART is enabled, assume it has been correctly setup + * by the bootloader and get the options + */ + if (readl(sport->port.membase + UART_CR) & CR_UART_EN) { + netx_console_get_options(&sport->port, &baud, + &parity, &bits, &flow); + } + + } + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver netx_reg; +static struct console netx_console = { + .name = "ttyNX", + .write = netx_console_write, + .device = uart_console_device, + .setup = netx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &netx_reg, +}; + +static int __init netx_console_init(void) +{ + register_console(&netx_console); + return 0; +} +console_initcall(netx_console_init); + +#define NETX_CONSOLE &netx_console +#else +#define NETX_CONSOLE NULL +#endif + +static struct uart_driver netx_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = "ttyNX", + .major = SERIAL_NX_MAJOR, + .minor = MINOR_START, + .nr = ARRAY_SIZE(netx_ports), + .cons = NETX_CONSOLE, +}; + +static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + if (sport) + uart_suspend_port(&netx_reg, &sport->port); + + return 0; +} + +static int serial_netx_resume(struct platform_device *pdev) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + if (sport) + uart_resume_port(&netx_reg, &sport->port); + + return 0; +} + +static int serial_netx_probe(struct platform_device *pdev) +{ + struct uart_port *port = &netx_ports[pdev->id].port; + + dev_info(&pdev->dev, "initialising\n"); + + port->dev = &pdev->dev; + + writel(1, port->membase + UART_RXFIFO_IRQLEVEL); + uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port); + platform_set_drvdata(pdev, &netx_ports[pdev->id]); + + return 0; +} + +static int serial_netx_remove(struct platform_device *pdev) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (sport) + uart_remove_one_port(&netx_reg, &sport->port); + + return 0; +} + +static struct platform_driver serial_netx_driver = { + .probe = serial_netx_probe, + .remove = serial_netx_remove, + + .suspend = serial_netx_suspend, + .resume = serial_netx_resume, + + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init netx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: NetX driver\n"); + + ret = uart_register_driver(&netx_reg); + if (ret) + return ret; + + ret = platform_driver_register(&serial_netx_driver); + if (ret != 0) + uart_unregister_driver(&netx_reg); + + return 0; +} + +static void __exit netx_serial_exit(void) +{ + platform_driver_unregister(&serial_netx_driver); + uart_unregister_driver(&netx_reg); +} + +module_init(netx_serial_init); +module_exit(netx_serial_exit); + +MODULE_AUTHOR("Sascha Hauer"); +MODULE_DESCRIPTION("NetX serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 77d4568ccc3a..ae3649568541 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -269,7 +269,6 @@ static unsigned int serial_pxa_get_mctrl(struct uart_port *port) unsigned char status; unsigned int ret; -return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; status = serial_in(up, UART_MSR); ret = 0; diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index f5aac92fb798..837b6da520b3 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -872,6 +872,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port) return "S3C2410"; case PORT_S3C2440: return "S3C2440"; + case PORT_S3C2412: + return "S3C2412"; default: return NULL; } @@ -1365,7 +1367,7 @@ static inline void s3c2410_serial_exit(void) #endif /* CONFIG_CPU_S3C2410 */ -#ifdef CONFIG_CPU_S3C2440 +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) static int s3c2440_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *clk) @@ -1528,6 +1530,141 @@ static inline void s3c2440_serial_exit(void) #define s3c2440_uart_inf_at NULL #endif /* CONFIG_CPU_S3C2440 */ +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) + +static int s3c2412_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + ucon &= ~S3C2412_UCON_CLKMASK; + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2440_UCON_UCLK; + else if (strcmp(clk->name, "pclk") == 0) + ucon |= S3C2440_UCON_PCLK; + else if (strcmp(clk->name, "usysclk") == 0) + ucon |= S3C2412_UCON_USYSCLK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c2412_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + switch (ucon & S3C2412_UCON_CLKMASK) { + case S3C2412_UCON_UCLK: + clk->divisor = 1; + clk->name = "uclk"; + break; + + case S3C2412_UCON_PCLK: + case S3C2412_UCON_PCLK2: + clk->divisor = 1; + clk->name = "pclk"; + break; + + case S3C2412_UCON_USYSCLK: + clk->divisor = 1; + clk->name = "usysclk"; + break; + } + + return 0; +} + +static int s3c2412_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("%s: port=%p (%08lx), cfg=%p\n", + __FUNCTION__, port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= S3C2412_UCON_CLKMASK; + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2412_uart_inf = { + .name = "Samsung S3C2412 UART", + .type = PORT_S3C2412, + .fifosize = 64, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c2412_serial_getsource, + .set_clksrc = s3c2412_serial_setsource, + .reset_port = s3c2412_serial_resetport, +}; + +/* device management */ + +static int s3c2412_serial_probe(struct platform_device *dev) +{ + dbg("s3c2440_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); +} + +static struct platform_driver s3c2412_serial_drv = { + .probe = s3c2412_serial_probe, + .remove = s3c24xx_serial_remove, + .suspend = s3c24xx_serial_suspend, + .resume = s3c24xx_serial_resume, + .driver = { + .name = "s3c2412-uart", + .owner = THIS_MODULE, + }, +}; + + +static inline int s3c2412_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf); +} + +static inline void s3c2412_serial_exit(void) +{ + platform_driver_unregister(&s3c2412_serial_drv); +} + +#define s3c2412_uart_inf_at &s3c2412_uart_inf +#else + +static inline int s3c2412_serial_init(void) +{ + return 0; +} + +static inline void s3c2412_serial_exit(void) +{ +} + +#define s3c2412_uart_inf_at NULL +#endif /* CONFIG_CPU_S3C2440 */ + + /* module initialisation code */ static int __init s3c24xx_serial_modinit(void) @@ -1542,6 +1679,7 @@ static int __init s3c24xx_serial_modinit(void) s3c2400_serial_init(); s3c2410_serial_init(); + s3c2412_serial_init(); s3c2440_serial_init(); return 0; @@ -1551,6 +1689,7 @@ static void __exit s3c24xx_serial_modexit(void) { s3c2400_serial_exit(); s3c2410_serial_exit(); + s3c2412_serial_exit(); s3c2440_serial_exit(); uart_unregister_driver(&s3c24xx_uart_drv); @@ -1773,6 +1912,8 @@ static int s3c24xx_serial_initconsole(void) info = s3c2410_uart_inf_at; } else if (strcmp(dev->name, "s3c2440-uart") == 0) { info = s3c2440_uart_inf_at; + } else if (strcmp(dev->name, "s3c2412-uart") == 0) { + info = s3c2412_uart_inf_at; } else { printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name); return 0; @@ -1796,4 +1937,4 @@ console_initcall(s3c24xx_serial_initconsole); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_DESCRIPTION("Samsung S3C2410/S3C2440 Serial port driver"); +MODULE_DESCRIPTION("Samsung S3C2410/S3C2440/S3C2412 Serial port driver"); diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index aa521b8e0d4e..776d4ff06084 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -145,14 +145,15 @@ lh7a40xuart_rx_chars (struct uart_port* port) { struct tty_struct* tty = port->info->tty; int cbRxMax = 256; /* (Gross) limit on receive */ - unsigned int data, flag;/* Received data and status */ + unsigned int data; /* Received data and status */ + unsigned int flag; while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) { data = UR (port, UART_R_DATA); flag = TTY_NORMAL; ++port->icount.rx; - if (unlikely(data & RxError)) { /* Quick check, short-circuit */ + if (unlikely(data & RxError)) { if (data & RxBreak) { data &= ~(RxFramingError | RxParityError); ++port->icount.brk; @@ -303,7 +304,7 @@ static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl) /* Note, kernel appears to be setting DTR and RTS on console. */ /* *** FIXME: this deserves more work. There's some work in - tracing all of the IO pins. */ + tracing all of the IO pins. */ #if 0 if( port->mapbase == UART1_PHYS) { gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS); @@ -662,9 +663,13 @@ static int __init lh7a40xuart_init(void) if (ret == 0) { int i; - for (i = 0; i < DEV_NR; i++) + for (i = 0; i < DEV_NR; i++) { + /* UART3, when used, requires GPIO pin reallocation */ + if (lh7a40x_ports[i].port.mapbase == UART3_PHYS) + GPIO_PINMUX |= 1<<3; uart_add_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port); + } } return ret; } diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c index f137804b3133..ba22e256c6f7 100644 --- a/drivers/serial/sunhv.c +++ b/drivers/serial/sunhv.c @@ -427,31 +427,32 @@ static int __init hv_console_compatible(char *buf, int len) static unsigned int __init get_interrupt(void) { - const char *cons_str = "console"; - const char *compat_str = "compatible"; - int node = prom_getchild(sun4v_vdev_root); - char buf[64]; - int err, len; - - node = prom_searchsiblings(node, cons_str); - if (!node) - return 0; + struct device_node *dev_node; - len = prom_getproplen(node, compat_str); - if (len == 0 || len == -1) - return 0; + dev_node = sun4v_vdev_root->child; + while (dev_node != NULL) { + struct property *prop; - err = prom_getproperty(node, compat_str, buf, 64); - if (err == -1) - return 0; + if (strcmp(dev_node->name, "console")) + goto next_sibling; + + prop = of_find_property(dev_node, "compatible", NULL); + if (!prop) + goto next_sibling; - if (!hv_console_compatible(buf, len)) + if (hv_console_compatible(prop->value, prop->length)) + break; + + next_sibling: + dev_node = dev_node->sibling; + } + if (!dev_node) return 0; /* Ok, the this is the OBP node for the sun4v hypervisor * console device. Decode the interrupt. */ - return sun4v_vdev_device_interrupt(node); + return sun4v_vdev_device_interrupt(dev_node); } static int __init sunhv_init(void) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index bfbe9dc90cca..e4c0fd2d6a9d 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -984,19 +984,19 @@ static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device * for_each_ebus(ebus) { for_each_ebusdev(edev, ebus) { - if (!strcmp(edev->prom_name, "se")) { + if (!strcmp(edev->prom_node->name, "se")) { callback(edev, arg); continue; - } else if (!strcmp(edev->prom_name, "serial")) { - char compat[32]; + } else if (!strcmp(edev->prom_node->name, "serial")) { + char *compat; int clen; /* On RIO this can be an SE, check it. We could * just check ebus->is_rio, but this is more portable. */ - clen = prom_getproperty(edev->prom_node, "compatible", - compat, sizeof(compat)); - if (clen > 0) { + compat = of_get_property(edev->prom_node, + "compatible", &clen); + if (compat && clen > 0) { if (strncmp(compat, "sab82532", 8) == 0) { callback(edev, arg); continue; diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 2b4f96541b8e..0268b307c01e 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1053,7 +1053,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up) */ for_each_ebus(ebus) { for_each_ebusdev(dev, ebus) { - if (dev->prom_node == up->port_node) { + if (dev->prom_node->node == up->port_node) { /* * The EBus is broken on sparc; it delivers * virtual addresses in resources. Oh well... @@ -1073,7 +1073,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up) #ifdef CONFIG_SPARC64 for_each_isa(isa_br) { for_each_isadev(isa_dev, isa_br) { - if (isa_dev->prom_node == up->port_node) { + if (isa_dev->prom_node->node == up->port_node) { /* Same on sparc64. Cool architecure... */ up->port.membase = (char *) isa_dev->resource.start; up->port.mapbase = isa_dev->resource.start; @@ -1295,9 +1295,9 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel) if (up->port.type == PORT_UNKNOWN) return -1; - printk(KERN_INFO "su%d at 0x%p (irq = %s) is a %s\n", + printk(KERN_INFO "su%d at 0x%p (irq = %d) is a %s\n", channel, - up->port.membase, __irq_itoa(up->port.irq), + up->port.membase, up->port.irq, sunsu_type(&up->port)); #ifdef CONFIG_SERIO diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index cd49ebbf4a45..76c9bac9271f 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1106,7 +1106,7 @@ static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode) + FHC_UREGS_ICLR; imap = central_bus->child->fhc_regs.uregs + FHC_UREGS_IMAP; - zilog_irq = build_irq(12, 0, iclr, imap); + zilog_irq = build_irq(0, iclr, imap); } else { err = prom_getproperty(zsnode, "interrupts", (char *) &sun4u_ino, @@ -1540,8 +1540,8 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe up->cflag = B4800 | CS8 | CLOCAL | CREAD; baud = 4800; } - printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a SunZilog\n", - channel, up->port.membase, __irq_itoa(zilog_irq)); + printk(KERN_INFO "zs%d at 0x%p (irq = %d) is a SunZilog\n", + channel, up->port.membase, zilog_irq); up->curregs[R15] = BRKIE; brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); |