summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/68360serial.c7
-rw-r--r--drivers/serial/8250.c28
-rw-r--r--drivers/serial/8250_early.c117
-rw-r--r--drivers/serial/Kconfig14
-rw-r--r--drivers/serial/atmel_serial.c32
-rw-r--r--drivers/serial/ip22zilog.c3
-rw-r--r--drivers/serial/serial_core.c6
-rw-r--r--drivers/serial/sh-sci.c4
-rw-r--r--drivers/serial/sh-sci.h50
-rw-r--r--drivers/serial/sn_console.c4
10 files changed, 166 insertions, 99 deletions
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 68817a7d8c0d..2aa6bfe8fdb3 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -934,8 +934,6 @@ static void change_speed(ser_info_t *info)
/*
* Set up parity check flag
*/
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
if (I_INPCK(info->tty))
info->read_status_mask |= BD_SC_FR | BD_SC_PR;
@@ -1527,11 +1525,6 @@ static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_term
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
- if ( (tty->termios->c_cflag == old_termios->c_cflag)
- && ( RELEVANT_IFLAG(tty->termios->c_iflag)
- == RELEVANT_IFLAG(old_termios->c_iflag)))
- return;
-
change_speed(info);
#ifdef modem_control
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c84dab083a85..0b3ec38ae614 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2514,12 +2514,18 @@ static int __init serial8250_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
+static int __init serial8250_console_early_setup(void)
+{
+ return serial8250_find_port_for_earlycon();
+}
+
static struct uart_driver serial8250_reg;
static struct console serial8250_console = {
.name = "ttyS",
.write = serial8250_console_write,
.device = uart_console_device,
.setup = serial8250_console_setup,
+ .early_setup = serial8250_console_early_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &serial8250_reg,
@@ -2533,7 +2539,7 @@ static int __init serial8250_console_init(void)
}
console_initcall(serial8250_console_init);
-static int __init find_port(struct uart_port *p)
+int serial8250_find_port(struct uart_port *p)
{
int line;
struct uart_port *port;
@@ -2546,26 +2552,6 @@ static int __init find_port(struct uart_port *p)
return -ENODEV;
}
-int __init serial8250_start_console(struct uart_port *port, char *options)
-{
- int line;
-
- line = find_port(port);
- if (line < 0)
- return -ENODEV;
-
- add_preferred_console("ttyS", line, options);
- printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n",
- line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port",
- port->iotype == UPIO_MEM ? (unsigned long) port->mapbase :
- (unsigned long) port->iobase, options);
- if (!(serial8250_console.flags & CON_ENABLED)) {
- serial8250_console.flags &= ~CON_PRINTBUFFER;
- register_console(&serial8250_console);
- }
- return line;
-}
-
#define SERIAL8250_CONSOLE &serial8250_console
#else
#define SERIAL8250_CONSOLE NULL
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index 7e511199b4c5..947c20507e1f 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -17,13 +17,11 @@
* we locate the device directly by its MMIO or I/O port address.
*
* The user can specify the device directly, e.g.,
- * console=uart,io,0x3f8,9600n8
- * console=uart,mmio,0xff5e0000,115200n8
- * or platform code can call early_uart_console_init() to set
- * the early UART device.
- *
- * After the normal serial driver starts, we try to locate the
- * matching ttyS device and start a console there.
+ * earlycon=uart8250,io,0x3f8,9600n8
+ * earlycon=uart8250,mmio,0xff5e0000,115200n8
+ * or
+ * console=uart8250,io,0x3f8,9600n8
+ * console=uart8250,mmio,0xff5e0000,115200n8
*/
#include <linux/tty.h>
@@ -32,17 +30,21 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/serial.h>
+#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/serial.h>
+#ifdef CONFIG_FIX_EARLYCON_MEM
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#endif
-struct early_uart_device {
+struct early_serial8250_device {
struct uart_port port;
char options[16]; /* e.g., 115200n8 */
unsigned int baud;
};
-static struct early_uart_device early_device __initdata;
-static int early_uart_registered __initdata;
+static struct early_serial8250_device early_device;
static unsigned int __init serial_in(struct uart_port *port, int offset)
{
@@ -80,7 +82,7 @@ static void __init putc(struct uart_port *port, int c)
serial_out(port, UART_TX, c);
}
-static void __init early_uart_write(struct console *console, const char *s, unsigned int count)
+static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count)
{
struct uart_port *port = &early_device.port;
unsigned int ier;
@@ -111,7 +113,7 @@ static unsigned int __init probe_baud(struct uart_port *port)
return (port->uartclk / 16) / quot;
}
-static void __init init_port(struct early_uart_device *device)
+static void __init init_port(struct early_serial8250_device *device)
{
struct uart_port *port = &device->port;
unsigned int divisor;
@@ -130,10 +132,9 @@ static void __init init_port(struct early_uart_device *device)
serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
-static int __init parse_options(struct early_uart_device *device, char *options)
+static int __init parse_options(struct early_serial8250_device *device, char *options)
{
struct uart_port *port = &device->port;
- int mapsize = 64;
int mmio, length;
if (!options)
@@ -143,12 +144,18 @@ static int __init parse_options(struct early_uart_device *device, char *options)
if (!strncmp(options, "mmio,", 5)) {
port->iotype = UPIO_MEM;
port->mapbase = simple_strtoul(options + 5, &options, 0);
- port->membase = ioremap(port->mapbase, mapsize);
+#ifdef CONFIG_FIX_EARLYCON_MEM
+ set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, port->mapbase & PAGE_MASK);
+ port->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+ port->membase += port->mapbase & ~PAGE_MASK;
+#else
+ port->membase = ioremap(port->mapbase, 64);
if (!port->membase) {
printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n",
__FUNCTION__, port->mapbase);
return -ENOMEM;
}
+#endif
mmio = 1;
} else if (!strncmp(options, "io,", 3)) {
port->iotype = UPIO_PORT;
@@ -175,9 +182,16 @@ static int __init parse_options(struct early_uart_device *device, char *options)
return 0;
}
-static int __init early_uart_setup(struct console *console, char *options)
+static struct console early_serial8250_console __initdata = {
+ .name = "uart",
+ .write = early_serial8250_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1,
+};
+
+static int __init early_serial8250_setup(char *options)
{
- struct early_uart_device *device = &early_device;
+ struct early_serial8250_device *device = &early_device;
int err;
if (device->port.membase || device->port.iobase)
@@ -190,61 +204,48 @@ static int __init early_uart_setup(struct console *console, char *options)
return 0;
}
-static struct console early_uart_console __initdata = {
- .name = "uart",
- .write = early_uart_write,
- .setup = early_uart_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init early_uart_console_init(void)
-{
- if (!early_uart_registered) {
- register_console(&early_uart_console);
- early_uart_registered = 1;
- }
- return 0;
-}
-console_initcall(early_uart_console_init);
-
-int __init early_serial_console_init(char *cmdline)
+int __init setup_early_serial8250_console(char *cmdline)
{
char *options;
int err;
- options = strstr(cmdline, "console=uart,");
- if (!options)
- return -ENODEV;
+ options = strstr(cmdline, "uart8250,");
+ if (!options) {
+ options = strstr(cmdline, "uart,");
+ if (!options)
+ return 0;
+ }
options = strchr(cmdline, ',') + 1;
- if ((err = early_uart_setup(NULL, options)) < 0)
+ if ((err = early_serial8250_setup(options)) < 0)
return err;
- return early_uart_console_init();
+
+ register_console(&early_serial8250_console);
+
+ return 0;
}
-static int __init early_uart_console_switch(void)
+int __init serial8250_find_port_for_earlycon(void)
{
- struct early_uart_device *device = &early_device;
+ struct early_serial8250_device *device = &early_device;
struct uart_port *port = &device->port;
- int mmio, line;
+ int line;
+ int ret;
- if (!(early_uart_console.flags & CON_ENABLED))
- return 0;
+ if (!device->port.membase && !device->port.iobase)
+ return -ENODEV;
- /* Try to start the normal driver on a matching line. */
- mmio = (port->iotype == UPIO_MEM);
- line = serial8250_start_console(port, device->options);
+ line = serial8250_find_port(port);
if (line < 0)
- printk("No ttyS device at %s 0x%lx for console\n",
- mmio ? "MMIO" : "I/O port",
- mmio ? port->mapbase :
- (unsigned long) port->iobase);
+ return -ENODEV;
- unregister_console(&early_uart_console);
- if (mmio)
- iounmap(port->membase);
+ ret = update_console_cmdline("uart", 8250,
+ "ttyS", line, device->options);
+ if (ret < 0)
+ ret = update_console_cmdline("uart", 0,
+ "ttyS", line, device->options);
- return 0;
+ return ret;
}
-late_initcall(early_uart_console_switch);
+
+early_param("earlycon", setup_early_serial8250_console);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 2adbed4e10f3..cab42cbd920d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -62,8 +62,22 @@ config SERIAL_8250_CONSOLE
kernel will automatically use the first serial line, /dev/ttyS0, as
system console.
+ you can set that using a kernel command line option such as
+ "console=uart8250,io,0x3f8,9600n8"
+ "console=uart8250,mmio,0xff5e0000,115200n8".
+ and it will switch to normal serial console when correponding port is
+ ready.
+ "earlycon=uart8250,io,0x3f8,9600n8"
+ "earlycon=uart8250,mmio,0xff5e0000,115200n8".
+ it will not only setup early console.
+
If unsure, say N.
+config FIX_EARLYCON_MEM
+ bool
+ depends on X86
+ default y
+
config SERIAL_8250_GSC
tristate
depends on SERIAL_8250 && GSC
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 3320bcd92c0a..4d6b3c56d20e 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -114,6 +114,7 @@ struct atmel_uart_port {
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
unsigned short suspended; /* is port suspended? */
+ int break_active; /* break being received */
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
@@ -252,6 +253,7 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
*/
static void atmel_rx_chars(struct uart_port *port)
{
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
struct tty_struct *tty = port->info->tty;
unsigned int status, ch, flg;
@@ -267,13 +269,29 @@ static void atmel_rx_chars(struct uart_port *port)
* note that the error handling code is
* out of the main execution path
*/
- if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
+ || atmel_port->break_active)) {
UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
- if (status & ATMEL_US_RXBRK) {
+ if (status & ATMEL_US_RXBRK
+ && !atmel_port->break_active) {
status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
port->icount.brk++;
+ atmel_port->break_active = 1;
+ UART_PUT_IER(port, ATMEL_US_RXBRK);
if (uart_handle_break(port))
goto ignore_char;
+ } else {
+ /*
+ * This is either the end-of-break
+ * condition or we've received at
+ * least one character without RXBRK
+ * being set. In both cases, the next
+ * RXBRK will indicate start-of-break.
+ */
+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ status &= ~ATMEL_US_RXBRK;
+ atmel_port->break_active = 0;
}
if (status & ATMEL_US_PARE)
port->icount.parity++;
@@ -352,6 +370,16 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
/* Interrupt receive */
if (pending & ATMEL_US_RXRDY)
atmel_rx_chars(port);
+ else if (pending & ATMEL_US_RXBRK) {
+ /*
+ * End of break detected. If it came along
+ * with a character, atmel_rx_chars will
+ * handle it.
+ */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ atmel_port->break_active = 0;
+ }
// TODO: All reads to CSR will clear these interrupts!
if (pending & ATMEL_US_RIIC) port->icount.rng++;
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index c3abfb39f316..f3257f708ef9 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -862,6 +862,7 @@ ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios,
up->cflag = termios->c_cflag;
ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
+ uart_update_timeout(port, termios->c_cflag, baud);
spin_unlock_irqrestore(&up->port.lock, flags);
}
@@ -1017,6 +1018,8 @@ ip22serial_console_termios(struct console *con, char *options)
}
con->cflag = cflag | CS8; /* 8N1 */
+
+ uart_update_timeout(&ip22zilog_port_table[con->index].port, cflag, baud);
}
static int __init ip22zilog_console_setup(struct console *con, char *options)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 326020f86f75..9c57486c2e7f 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1910,6 +1910,12 @@ uart_set_options(struct uart_port *port, struct console *co,
if (flow == 'r')
termios.c_cflag |= CRTSCTS;
+ /*
+ * some uarts on other side don't support no flow control.
+ * So we set * DTR in host uart to make them happy
+ */
+ port->mctrl |= TIOCM_DTR;
+
port->ops->set_termios(port, &termios, NULL);
co->cflag = termios.c_cflag;
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 1f89496d530e..672cd1042539 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -367,7 +367,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
} else {
#ifdef CONFIG_CPU_SUBTYPE_SH7343
/* Nothing */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index fb04fb5f9843..247fb66bf0f4 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -53,7 +53,12 @@
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7091) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751R)
# define SCSPTR1 0xffe0001c /* 8 bit SCI */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -73,7 +78,7 @@
# define SCPDR 0xA4050136 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCI_NPORTS 2
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -168,6 +173,14 @@
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+# define SCSPTR0 0xffc30020 /* 16 bit SCIF */
+# define SCSPTR1 0xffc40020 /* 16 bit SCIF */
+# define SCSPTR2 0xffc50020 /* 16 bit SCIF */
+# define SCSPTR3 0xffc60020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* Overrun error bit */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
#else
# error CPU subtype not defined
#endif
@@ -177,10 +190,15 @@
#define SCI_CTRL_FLAGS_RIE 0x40 /* all */
#define SCI_CTRL_FLAGS_TE 0x20 /* all */
#define SCI_CTRL_FLAGS_RE 0x10 /* all */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7091) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SHX3)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
#else
#define SCI_CTRL_FLAGS_REIE 0
@@ -514,8 +532,12 @@ static inline void set_sh771x_scif_pfc(struct uart_port *port)
}
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7091) || \
defined(CONFIG_CPU_SUBTYPE_SH4_202)
static inline int sci_rxd_in(struct uart_port *port)
{
@@ -653,6 +675,18 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffc30000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffc40000)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffc50000)
+ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffc60000)
+ return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+}
#endif
/*
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index a27e9e92cb5e..41fc61264443 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -759,7 +759,7 @@ static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
*/
static void sn_sal_console_write(struct console *, const char *, unsigned);
-static int __init sn_sal_console_setup(struct console *, char *);
+static int sn_sal_console_setup(struct console *, char *);
static struct uart_driver sal_console_uart;
extern struct tty_driver *uart_console_device(struct console *, int *);
@@ -1006,7 +1006,7 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
* here so providing it is easier.
*
*/
-static int __init sn_sal_console_setup(struct console *co, char *options)
+static int sn_sal_console_setup(struct console *co, char *options)
{
return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 16:12:35 +0100