summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/21285.c2
-rw-r--r--drivers/serial/Kconfig1
-rw-r--r--drivers/serial/atmel_serial.c6
-rw-r--r--drivers/serial/bfin_5xx.c2
-rw-r--r--drivers/serial/clps711x.c2
-rw-r--r--drivers/serial/crisv10.c79
-rw-r--r--drivers/serial/crisv10.h3
-rw-r--r--drivers/serial/imx.c4
-rw-r--r--drivers/serial/netx-serial.c4
-rw-r--r--drivers/serial/pxa.c4
-rw-r--r--drivers/serial/s3c2400.c4
-rw-r--r--drivers/serial/s3c2410.c4
-rw-r--r--drivers/serial/s3c2412.c4
-rw-r--r--drivers/serial/s3c2440.c4
-rw-r--r--drivers/serial/sa1100.c2
-rw-r--r--drivers/serial/samsung.c4
-rw-r--r--drivers/serial/serial_ks8695.c4
-rw-r--r--drivers/serial/sunhv.c2
-rw-r--r--drivers/serial/sunsab.c2
-rw-r--r--drivers/serial/sunsu.c2
-rw-r--r--drivers/serial/sunzilog.c2
21 files changed, 72 insertions, 69 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 6558a4037806..f31c6698419c 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -19,7 +19,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/dec21285.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#define BAUD_BASE (mem_fclk_21285/64)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3b4a14e355c1..77cb34270fc1 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
depends on ARM && PLAT_S3C24XX
+ select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 1fee12c1f4f8..3a6da80b081c 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -42,11 +42,11 @@
#include <asm/io.h>
#include <asm/mach/serial_at91.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
#ifdef CONFIG_ARM
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
+#include <mach/cpu.h>
+#include <mach/gpio.h>
#endif
#define PDC_BUFFER_SIZE 512
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 9d8543762a30..efcd44344fb1 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -817,7 +817,7 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
if (line >= port->info->port.tty->driver->num)
return;
- switch (port->info->port.tty->ldisc.num) {
+ switch (port->info->port.tty->termios->c_line) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index fc1fa9267c59..459f3420a429 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -39,7 +39,7 @@
#include <linux/serial_core.h>
#include <linux/serial.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/clps7111.h>
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8249ac490559..bf94a770bb44 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -234,7 +234,7 @@ unsigned long r_alt_ser_baudrate_shadow = 0;
static struct e100_serial rs_table[] = {
{ .baud = DEF_BAUD,
- .port = (unsigned char *)R_SERIAL0_CTRL,
+ .ioport = (unsigned char *)R_SERIAL0_CTRL,
.irq = 1U << 12, /* uses DMA 6 and 7 */
.oclrintradr = R_DMA_CH6_CLR_INTR,
.ofirstadr = R_DMA_CH6_FIRST,
@@ -288,7 +288,7 @@ static struct e100_serial rs_table[] = {
}, /* ttyS0 */
#ifndef CONFIG_SVINTO_SIM
{ .baud = DEF_BAUD,
- .port = (unsigned char *)R_SERIAL1_CTRL,
+ .ioport = (unsigned char *)R_SERIAL1_CTRL,
.irq = 1U << 16, /* uses DMA 8 and 9 */
.oclrintradr = R_DMA_CH8_CLR_INTR,
.ofirstadr = R_DMA_CH8_FIRST,
@@ -344,7 +344,7 @@ static struct e100_serial rs_table[] = {
}, /* ttyS1 */
{ .baud = DEF_BAUD,
- .port = (unsigned char *)R_SERIAL2_CTRL,
+ .ioport = (unsigned char *)R_SERIAL2_CTRL,
.irq = 1U << 4, /* uses DMA 2 and 3 */
.oclrintradr = R_DMA_CH2_CLR_INTR,
.ofirstadr = R_DMA_CH2_FIRST,
@@ -398,7 +398,7 @@ static struct e100_serial rs_table[] = {
}, /* ttyS2 */
{ .baud = DEF_BAUD,
- .port = (unsigned char *)R_SERIAL3_CTRL,
+ .ioport = (unsigned char *)R_SERIAL3_CTRL,
.irq = 1U << 8, /* uses DMA 4 and 5 */
.oclrintradr = R_DMA_CH4_CLR_INTR,
.ofirstadr = R_DMA_CH4_FIRST,
@@ -939,7 +939,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
/* Output */
#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK)
/* Input */
-#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK)
+#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK)
/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */
/* Is an output */
@@ -1092,7 +1092,7 @@ e100_rts(struct e100_serial *info, int set)
local_irq_save(flags);
info->rx_ctrl &= ~E100_RTS_MASK;
info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */
- info->port[REG_REC_CTRL] = info->rx_ctrl;
+ info->ioport[REG_REC_CTRL] = info->rx_ctrl;
local_irq_restore(flags);
#ifdef SERIAL_DEBUG_IO
printk("ser%i rts %i\n", info->line, set);
@@ -1142,7 +1142,7 @@ e100_disable_rx(struct e100_serial *info)
{
#ifndef CONFIG_SVINTO_SIM
/* disable the receiver */
- info->port[REG_REC_CTRL] =
+ info->ioport[REG_REC_CTRL] =
(info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
#endif
}
@@ -1152,7 +1152,7 @@ e100_enable_rx(struct e100_serial *info)
{
#ifndef CONFIG_SVINTO_SIM
/* enable the receiver */
- info->port[REG_REC_CTRL] =
+ info->ioport[REG_REC_CTRL] =
(info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
#endif
}
@@ -1490,7 +1490,7 @@ rs_stop(struct tty_struct *tty)
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
}
- *((unsigned long *)&info->port[REG_XOFF]) = xoff;
+ *((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
local_irq_restore(flags);
}
}
@@ -1513,7 +1513,7 @@ rs_start(struct tty_struct *tty)
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
}
- *((unsigned long *)&info->port[REG_XOFF]) = xoff;
+ *((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
if (!info->uses_dma_out &&
info->xmit.head != info->xmit.tail && info->xmit.buf)
e100_enable_serial_tx_ready_irq(info);
@@ -1888,7 +1888,7 @@ static void receive_chars_dma(struct e100_serial *info)
handle_all_descr_data(info);
/* Read the status register to detect errors */
- rstat = info->port[REG_STATUS];
+ rstat = info->ioport[REG_STATUS];
if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat));
}
@@ -1897,7 +1897,7 @@ static void receive_chars_dma(struct e100_serial *info)
/* If we got an error, we must reset it by reading the
* data_in field
*/
- unsigned char data = info->port[REG_DATA];
+ unsigned char data = info->ioport[REG_DATA];
PROCSTAT(ser_stat[info->line].errors_cnt++);
DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
@@ -2077,7 +2077,7 @@ static int force_eop_if_needed(struct e100_serial *info)
/* We check data_avail bit to determine if data has
* arrived since last time
*/
- unsigned char rstat = info->port[REG_STATUS];
+ unsigned char rstat = info->ioport[REG_STATUS];
/* error or datavail? */
if (rstat & SER_ERROR_MASK) {
@@ -2096,7 +2096,7 @@ static int force_eop_if_needed(struct e100_serial *info)
TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n",
rstat | (info->line << 8)));
/* Read data to clear status flags */
- (void)info->port[REG_DATA];
+ (void)info->ioport[REG_DATA];
info->forced_eop = 0;
START_FLUSH_FAST_TIMER(info, "magic");
@@ -2296,7 +2296,7 @@ struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
}
/* Read data and status at the same time */
- data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+ data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
more_data:
if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) {
DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
@@ -2391,7 +2391,7 @@ more_data:
info->icount.rx++;
- data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+ data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read));
goto more_data;
@@ -2413,7 +2413,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
return handle_ser_rx_interrupt_no_dma(info);
}
/* DMA is used */
- rstat = info->port[REG_STATUS];
+ rstat = info->ioport[REG_STATUS];
if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
}
@@ -2426,7 +2426,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
/* If we got an error, we must reset it by reading the
* data_in field
*/
- data = info->port[REG_DATA];
+ data = info->ioport[REG_DATA];
DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data));
DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat));
if (!data && (rstat & SER_FRAMING_ERR_MASK)) {
@@ -2528,10 +2528,10 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
unsigned char rstat;
DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
local_irq_save(flags);
- rstat = info->port[REG_STATUS];
+ rstat = info->ioport[REG_STATUS];
DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
- info->port[REG_TR_DATA] = info->x_char;
+ info->ioport[REG_TR_DATA] = info->x_char;
info->icount.tx++;
info->x_char = 0;
/* We must enable since it is disabled in ser_interrupt */
@@ -2545,7 +2545,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
/* We only use normal tx interrupt when sending x_char */
DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
local_irq_save(flags);
- rstat = info->port[REG_STATUS];
+ rstat = info->ioport[REG_STATUS];
DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
e100_disable_serial_tx_ready_irq(info);
if (info->port.tty->stopped)
@@ -2573,7 +2573,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
/* Send a byte, rs485 timing is critical so turn of ints */
local_irq_save(flags);
- info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
+ info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
info->icount.tx++;
if (info->xmit.head == info->xmit.tail) {
@@ -2848,7 +2848,7 @@ startup(struct e100_serial * info)
/* dummy read to reset any serial errors */
- (void)info->port[REG_DATA];
+ (void)info->ioport[REG_DATA];
/* enable the interrupts */
if (info->uses_dma_out)
@@ -2897,7 +2897,7 @@ shutdown(struct e100_serial * info)
/* shut down the transmitter and receiver */
DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
e100_disable_rx(info);
- info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
+ info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
/* disable interrupts, reset dma channels */
if (info->uses_dma_in) {
@@ -2968,7 +2968,7 @@ change_speed(struct e100_serial *info)
if (!info->port.tty || !info->port.tty->termios)
return;
- if (!info->port)
+ if (!info->ioport)
return;
cflag = info->port.tty->termios->c_cflag;
@@ -3037,7 +3037,7 @@ change_speed(struct e100_serial *info)
info->baud = cflag_to_baud(cflag);
#ifndef CONFIG_SVINTO_SIM
- info->port[REG_BAUD] = cflag_to_etrax_baud(cflag);
+ info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag);
#endif /* CONFIG_SVINTO_SIM */
}
@@ -3097,8 +3097,8 @@ change_speed(struct e100_serial *info)
/* actually write the control regs to the hardware */
- info->port[REG_TR_CTRL] = info->tx_ctrl;
- info->port[REG_REC_CTRL] = info->rx_ctrl;
+ info->ioport[REG_TR_CTRL] = info->tx_ctrl;
+ info->ioport[REG_REC_CTRL] = info->rx_ctrl;
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
if (info->port.tty->termios->c_iflag & IXON ) {
@@ -3107,7 +3107,7 @@ change_speed(struct e100_serial *info)
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
}
- *((unsigned long *)&info->port[REG_XOFF]) = xoff;
+ *((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
local_irq_restore(flags);
#endif /* !CONFIG_SVINTO_SIM */
@@ -3156,7 +3156,7 @@ static int rs_raw_write(struct tty_struct *tty,
#ifdef SERIAL_DEBUG_DATA
if (info->line == SERIAL_DEBUG_LINE)
printk("rs_raw_write (%d), status %d\n",
- count, info->port[REG_STATUS]);
+ count, info->ioport[REG_STATUS]);
#endif
#ifdef CONFIG_SVINTO_SIM
@@ -3427,7 +3427,7 @@ get_serial_info(struct e100_serial * info,
memset(&tmp, 0, sizeof(tmp));
tmp.type = info->type;
tmp.line = info->line;
- tmp.port = (int)info->port;
+ tmp.port = (int)info->ioport;
tmp.irq = info->irq;
tmp.flags = info->flags;
tmp.baud_base = info->baud_base;
@@ -3557,14 +3557,14 @@ char *get_control_state_str(int MLines, char *s)
}
#endif
-static void
+static int
rs_break(struct tty_struct *tty, int break_state)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
unsigned long flags;
- if (!info->port)
- return;
+ if (!info->ioport)
+ return -EIO;
local_irq_save(flags);
if (break_state == -1) {
@@ -3575,8 +3575,9 @@ rs_break(struct tty_struct *tty, int break_state)
/* Set bit 7 (txd) and 6 (tr_enable) */
info->tx_ctrl |= (0x80 | 0x40);
}
- info->port[REG_TR_CTRL] = info->tx_ctrl;
+ info->ioport[REG_TR_CTRL] = info->tx_ctrl;
local_irq_restore(flags);
+ return 0;
}
static int
@@ -4231,9 +4232,9 @@ static int line_info(char *buf, struct e100_serial *info)
unsigned long tmp;
ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
- info->line, (unsigned long)info->port, info->irq);
+ info->line, (unsigned long)info->ioport, info->irq);
- if (!info->port || (info->type == PORT_UNKNOWN)) {
+ if (!info->ioport || (info->type == PORT_UNKNOWN)) {
ret += sprintf(buf+ret, "\n");
return ret;
}
@@ -4281,7 +4282,7 @@ static int line_info(char *buf, struct e100_serial *info)
}
{
- unsigned char rstat = info->port[REG_STATUS];
+ unsigned char rstat = info->ioport[REG_STATUS];
if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
ret += sprintf(buf+ret, " xoff_detect:1");
}
@@ -4502,7 +4503,7 @@ rs_init(void)
if (info->enabled) {
printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
- serial_driver->name, info->line, (unsigned int)info->port);
+ serial_driver->name, info->line, (unsigned int)info->ioport);
}
}
#ifdef CONFIG_ETRAX_FAST_TIMER
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
index ccd0f32b7372..e3c5c8c3c09b 100644
--- a/drivers/serial/crisv10.h
+++ b/drivers/serial/crisv10.h
@@ -36,8 +36,9 @@ struct etrax_recv_buffer {
};
struct e100_serial {
+ struct tty_port port;
int baud;
- volatile u8 *port; /* R_SERIALx_CTRL */
+ volatile u8 *ioport; /* R_SERIALx_CTRL */
u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */
/* Output registers */
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index e0da4dc7bbf6..6a29f9330a73 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -44,8 +44,8 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
/* Register definitions */
#define URXD0 0x0 /* Receiver Register */
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 9f8ccb735c19..3f489329e8d3 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -35,8 +35,8 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_NX_MAJOR 204
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index b9a93f326fb8..f7a0d37c4221 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -45,9 +45,9 @@
#include <linux/clk.h>
#include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
struct uart_pxa_port {
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index a1102053e553..c8b4266ac35f 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -17,10 +17,10 @@
#include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c5f03f41686f..40a2531b5541 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -19,10 +19,10 @@
#include <linux/serial.h>
#include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce0c220e3e92..d0170319c729 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -19,10 +19,10 @@
#include <linux/serial.h>
#include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 38f954bd39c6..d4a2b17b2498 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -19,10 +19,10 @@
#include <linux/serial.h>
#include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index a5e76cc18073..b24a25ea6bc5 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -39,7 +39,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach/serial_sa1100.h>
/* We've been assigned a range on the "Low-density serial ports" major */
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index d852f83f8900..5a88b3f9fe9b 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -45,10 +45,10 @@
#include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include "samsung.h"
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 0edbc5dd378b..b9cbfc87f616 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -26,8 +26,8 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/regs-uart.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-uart.h>
+#include <mach/regs-irq.h>
#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index aeeec5588afd..e41766d08035 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -17,11 +17,11 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/of_device.h>
#include <asm/hypervisor.h>
#include <asm/spitfire.h>
#include <asm/prom.h>
-#include <asm/of_device.h>
#include <asm/irq.h>
#if defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 15ee497e1c78..29b4458abf74 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -32,11 +32,11 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/of_device.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/prom.h>
-#include <asm/of_device.h>
#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index e24e68235088..a378464f9292 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -35,11 +35,11 @@
#include <linux/serial_reg.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/of_device.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/prom.h>
-#include <asm/of_device.h>
#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 0f3d69b86d67..3cb4c8aee13f 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -32,11 +32,11 @@
#include <linux/serio.h>
#endif
#include <linux/init.h>
+#include <linux/of_device.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/prom.h>
-#include <asm/of_device.h>
#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 11:31:02 +0100