summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c25
-rw-r--r--drivers/serial/dz.c2
-rw-r--r--drivers/serial/ip22zilog.c3
-rw-r--r--drivers/serial/serial_core.c1
-rw-r--r--drivers/serial/sunsab.c7
-rw-r--r--drivers/serial/sunsu.c40
-rw-r--r--drivers/serial/sunzilog.c125
-rw-r--r--drivers/serial/vr41xx_siu.c1
8 files changed, 130 insertions, 74 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0995430e4cf1..0ae9ced00ed4 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -299,6 +299,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
static unsigned int serial_in(struct uart_8250_port *up, int offset)
{
+ unsigned int tmp;
offset = map_8250_in_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
@@ -317,6 +318,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset)
return __raw_readl(up->port.membase + offset);
#endif
+ case UPIO_TSI:
+ if (offset == UART_IIR) {
+ tmp = readl((u32 *)(up->port.membase + UART_RX));
+ return (cpu_to_le32(tmp) >> 8) & 0xff;
+ } else
+ return readb(up->port.membase + offset);
+
default:
return inb(up->port.iobase + offset);
}
@@ -346,6 +354,10 @@ serial_out(struct uart_8250_port *up, int offset, int value)
__raw_writel(value, up->port.membase + offset);
break;
#endif
+ case UPIO_TSI:
+ if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+ writeb(value, up->port.membase + offset);
+ break;
default:
outb(value, up->port.iobase + offset);
@@ -2240,10 +2252,14 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
touch_nmi_watchdog();
- if (oops_in_progress) {
- locked = spin_trylock_irqsave(&up->port.lock, flags);
+ local_irq_save(flags);
+ if (up->port.sysrq) {
+ /* serial8250_handle_port() already took the lock */
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
} else
- spin_lock_irqsave(&up->port.lock, flags);
+ spin_lock(&up->port.lock);
/*
* First save the IER then disable the interrupts
@@ -2265,7 +2281,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
serial_out(up, UART_IER, ier);
if (locked)
- spin_unlock_irqrestore(&up->port.lock, flags);
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
}
static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index d119c8296a78..8a98aae80e22 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -673,7 +673,7 @@ static void dz_reset(struct dz_port *dport)
}
#ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_putchar(struct uart_port *port, int ch)
+static void dz_console_putchar(struct uart_port *uport, int ch)
{
struct dz_port *dport = (struct dz_port *)uport;
unsigned long flags;
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 342042889f6e..5ff269fb604c 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -1143,9 +1143,8 @@ static void __init ip22zilog_prepare(void)
up[(chip * 2) + 1].port.fifosize = 1;
up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
- up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
up[(chip * 2) + 1].port.line = (chip * 2) + 1;
- up[(chip * 2) + 1].flags = 0;
+ up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
}
}
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index d5f636fbf29a..80ef7d482756 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2036,6 +2036,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_AU:
+ case UPIO_TSI:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 0dbd4df44c05..dc673e1b6fd9 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1047,12 +1047,13 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id *
up = &sunsab_ports[inst * 2];
err = sunsab_init_one(&up[0], op,
- sizeof(union sab82532_async_regs),
+ 0,
(inst * 2) + 0);
if (err)
return err;
- err = sunsab_init_one(&up[0], op, 0,
+ err = sunsab_init_one(&up[1], op,
+ sizeof(union sab82532_async_regs),
(inst * 2) + 1);
if (err) {
of_iounmap(up[0].port.membase,
@@ -1117,7 +1118,7 @@ static int __init sunsab_init(void)
int err;
num_channels = 0;
- for_each_node_by_name(dp, "su")
+ for_each_node_by_name(dp, "se")
num_channels += 2;
for_each_node_by_name(dp, "serial") {
if (of_device_is_compatible(dp, "sab82532"))
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index f9013baba05b..d3a5aeee73a3 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1200,6 +1200,11 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up)
if (up->port.type == PORT_UNKNOWN)
return -ENODEV;
+ printk("%s: %s port at %lx, irq %u\n",
+ to_of_device(up->port.dev)->node->full_name,
+ (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
+ up->port.mapbase, up->port.irq);
+
#ifdef CONFIG_SERIO
serio = &up->serio;
serio->port_data = up;
@@ -1406,25 +1411,35 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
struct device_node *dp = op->node;
struct uart_sunsu_port *up;
struct resource *rp;
+ enum su_type type;
int err;
- if (inst >= UART_NR)
- return -EINVAL;
+ type = su_get_type(dp);
+ if (type == SU_PORT_PORT) {
+ if (inst >= UART_NR)
+ return -EINVAL;
+ up = &sunsu_ports[inst];
+ } else {
+ up = kzalloc(sizeof(*up), GFP_KERNEL);
+ if (!up)
+ return -ENOMEM;
+ }
- up = &sunsu_ports[inst];
up->port.line = inst;
spin_lock_init(&up->port.lock);
- up->su_type = su_get_type(dp);
+ up->su_type = type;
rp = &op->resource[0];
- up->port.mapbase = op->resource[0].start;
-
+ up->port.mapbase = rp->start;
up->reg_size = (rp->end - rp->start) + 1;
up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
- if (!up->port.membase)
+ if (!up->port.membase) {
+ if (type != SU_PORT_PORT)
+ kfree(up);
return -ENOMEM;
+ }
up->port.irq = op->irqs[0];
@@ -1436,8 +1451,11 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
err = 0;
if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
err = sunsu_kbd_ms_init(up);
- if (err)
+ if (err) {
+ kfree(up);
goto out_unmap;
+ }
+ dev_set_drvdata(&op->dev, up);
return 0;
}
@@ -1476,8 +1494,12 @@ static int __devexit su_remove(struct of_device *dev)
#ifdef CONFIG_SERIO
serio_unregister_port(&up->serio);
#endif
- } else if (up->port.type != PORT_UNKNOWN)
+ kfree(up);
+ } else if (up->port.type != PORT_UNKNOWN) {
uart_remove_one_port(&sunsu_reg, &up->port);
+ }
+
+ dev_set_drvdata(&dev->dev, NULL);
return 0;
}
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index a1456d9352cb..47bc3d57e019 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -68,9 +68,6 @@ static int num_sunzilog;
#define NUM_SUNZILOG num_sunzilog
#define NUM_CHANNELS (NUM_SUNZILOG * 2)
-#define KEYBOARD_LINE 0x2
-#define MOUSE_LINE 0x3
-
#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
@@ -1225,12 +1222,10 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
{
int baud, brg;
- if (channel == KEYBOARD_LINE) {
- up->flags |= SUNZILOG_FLAG_CONS_KEYB;
+ if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
up->cflag = B1200 | CS8 | CLOCAL | CREAD;
baud = 1200;
} else {
- up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
up->cflag = B4800 | CS8 | CLOCAL | CREAD;
baud = 4800;
}
@@ -1243,14 +1238,14 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
}
#ifdef CONFIG_SERIO
-static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
+static void __init sunzilog_register_serio(struct uart_sunzilog_port *up)
{
struct serio *serio = &up->serio;
serio->port_data = up;
serio->id.type = SERIO_RS232;
- if (channel == KEYBOARD_LINE) {
+ if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
serio->id.proto = SERIO_SUNKBD;
strlcpy(serio->name, "zskbd", sizeof(serio->name));
} else {
@@ -1259,7 +1254,8 @@ static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int ch
strlcpy(serio->name, "zsms", sizeof(serio->name));
}
strlcpy(serio->phys,
- (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+ ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
+ "zs/serio0" : "zs/serio1"),
sizeof(serio->phys));
serio->write = sunzilog_serio_write;
@@ -1286,8 +1282,8 @@ static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
(void) read_zsreg(channel, R0);
}
- if (up->port.line == KEYBOARD_LINE ||
- up->port.line == MOUSE_LINE) {
+ if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+ SUNZILOG_FLAG_CONS_MOUSE)) {
sunzilog_init_kbdms(up, up->port.line);
up->curregs[R9] |= (NV | MIE);
write_zsreg(channel, R9, up->curregs[R9]);
@@ -1313,37 +1309,26 @@ static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
spin_unlock_irqrestore(&up->port.lock, flags);
#ifdef CONFIG_SERIO
- if (up->port.line == KEYBOARD_LINE || up->port.line == MOUSE_LINE)
- sunzilog_register_serio(up, up->port.line);
+ if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+ SUNZILOG_FLAG_CONS_MOUSE))
+ sunzilog_register_serio(up);
#endif
}
-static int __devinit zs_get_instance(struct device_node *dp)
-{
- int ret;
-
- ret = of_getintprop_default(dp, "slave", -1);
- if (ret != -1)
- return ret;
-
- if (of_find_property(dp, "keyboard", NULL))
- ret = 1;
- else
- ret = 0;
-
- return ret;
-}
-
static int zilog_irq = -1;
-static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *match)
+static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
{
- struct of_device *op = to_of_device(&dev->dev);
+ static int inst;
struct uart_sunzilog_port *up;
struct zilog_layout __iomem *rp;
- int inst = zs_get_instance(dev->node);
+ int keyboard_mouse;
int err;
+ keyboard_mouse = 0;
+ if (of_find_property(op->node, "keyboard", NULL))
+ keyboard_mouse = 1;
+
sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
sizeof(struct zilog_layout),
"zs");
@@ -1352,16 +1337,8 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
rp = sunzilog_chip_regs[inst];
- if (zilog_irq == -1) {
+ if (zilog_irq == -1)
zilog_irq = op->irqs[0];
- err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
- "zs", sunzilog_irq_chain);
- if (err) {
- of_iounmap(rp, sizeof(struct zilog_layout));
-
- return err;
- }
- }
up = &sunzilog_port_table[inst * 2];
@@ -1378,7 +1355,7 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
up[0].port.line = (inst * 2) + 0;
up[0].port.dev = &op->dev;
up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
- if (inst == 1)
+ if (keyboard_mouse)
up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
sunzilog_init_hw(&up[0]);
@@ -1395,11 +1372,11 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
up[1].port.line = (inst * 2) + 1;
up[1].port.dev = &op->dev;
up[1].flags |= 0;
- if (inst == 1)
+ if (keyboard_mouse)
up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
sunzilog_init_hw(&up[1]);
- if (inst != 1) {
+ if (!keyboard_mouse) {
err = uart_add_one_port(&sunzilog_reg, &up[0].port);
if (err) {
of_iounmap(rp, sizeof(struct zilog_layout));
@@ -1411,9 +1388,18 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
of_iounmap(rp, sizeof(struct zilog_layout));
return err;
}
+ } else {
+ printk(KERN_INFO "%s: Keyboard at MMIO %lx (irq = %d) "
+ "is a zs\n",
+ op->dev.bus_id, up[0].port.mapbase, op->irqs[0]);
+ printk(KERN_INFO "%s: Mouse at MMIO %lx (irq = %d) "
+ "is a zs\n",
+ op->dev.bus_id, up[1].port.mapbase, op->irqs[0]);
}
- dev_set_drvdata(&dev->dev, &up[0]);
+ dev_set_drvdata(&op->dev, &up[0]);
+
+ inst++;
return 0;
}
@@ -1462,36 +1448,65 @@ static struct of_platform_driver zs_driver = {
static int __init sunzilog_init(void)
{
struct device_node *dp;
- int err;
+ int err, uart_count;
+ int num_keybms;
NUM_SUNZILOG = 0;
- for_each_node_by_name(dp, "zs")
+ num_keybms = 0;
+ for_each_node_by_name(dp, "zs") {
NUM_SUNZILOG++;
+ if (of_find_property(dp, "keyboard", NULL))
+ num_keybms++;
+ }
+ uart_count = 0;
if (NUM_SUNZILOG) {
int uart_count;
err = sunzilog_alloc_tables();
if (err)
- return err;
+ goto out;
- /* Subtract 1 for keyboard, 1 for mouse. */
- uart_count = (NUM_SUNZILOG * 2) - 2;
+ uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms);
sunzilog_reg.nr = uart_count;
sunzilog_reg.minor = sunserial_current_minor;
err = uart_register_driver(&sunzilog_reg);
- if (err) {
- sunzilog_free_tables();
- return err;
- }
+ if (err)
+ goto out_free_tables;
+
sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
sunzilog_reg.cons = SUNZILOG_CONSOLE();
sunserial_current_minor += uart_count;
}
- return of_register_driver(&zs_driver, &of_bus_type);
+ err = of_register_driver(&zs_driver, &of_bus_type);
+ if (err)
+ goto out_unregister_uart;
+
+ if (zilog_irq != -1) {
+ err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
+ "zs", sunzilog_irq_chain);
+ if (err)
+ goto out_unregister_driver;
+ }
+
+out:
+ return err;
+
+out_unregister_driver:
+ of_unregister_driver(&zs_driver);
+
+out_unregister_uart:
+ if (NUM_SUNZILOG) {
+ uart_unregister_driver(&sunzilog_reg);
+ sunzilog_reg.cons = NULL;
+ }
+
+out_free_tables:
+ sunzilog_free_tables();
+ goto out;
}
static void __exit sunzilog_exit(void)
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index e93d0edc2e08..6c8b0ea83c3c 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -38,6 +38,7 @@
#include <linux/tty_flip.h>
#include <asm/io.h>
+#include <asm/vr41xx/irq.h>
#include <asm/vr41xx/siu.h>
#include <asm/vr41xx/vr41xx.h>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 15:04:56 +0100