summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250_acorn.c3
-rw-r--r--drivers/serial/Kconfig18
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/cpm_uart/cpm_uart.h2
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c3
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c6
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c6
-rw-r--r--drivers/serial/serial_ks8695.c657
-rw-r--r--drivers/serial/sunhv.c4
-rw-r--r--drivers/serial/sunzilog.c138
-rw-r--r--drivers/serial/sunzilog.h19
11 files changed, 812 insertions, 45 deletions
diff --git a/drivers/serial/8250_acorn.c b/drivers/serial/8250_acorn.c
index 562ba745a044..b0ce8c56f1a4 100644
--- a/drivers/serial/8250_acorn.c
+++ b/drivers/serial/8250_acorn.c
@@ -54,7 +54,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
info->num_ports = type->num_ports;
bus_addr = ecard_resource_start(ec, type->type);
- info->vaddr = ioremap(bus_addr, ecard_resource_len(ec, type->type));
+ info->vaddr = ecardm_iomap(ec, type->type, 0, 0);
if (!info->vaddr) {
kfree(info);
return -ENOMEM;
@@ -91,7 +91,6 @@ static void __devexit serial_card_remove(struct expansion_card *ec)
if (info->ports[i] > 0)
serial8250_unregister_port(info->ports[i]);
- iounmap(info->vaddr);
kfree(info);
}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e8efe938c4e7..315ea9916456 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -5,6 +5,7 @@
#
menu "Serial drivers"
+ depends on HAS_IOMEM
#
# The new 8250/16550 serial drivers
@@ -358,6 +359,23 @@ config SERIAL_ATMEL_TTYAT
Say Y if you have an external 8250/16C550 UART. If unsure, say N.
+config SERIAL_KS8695
+ bool "Micrel KS8695 (Centaur) serial port support"
+ depends on ARCH_KS8695
+ select SERIAL_CORE
+ help
+ This selects the Micrel Centaur KS8695 UART. Say Y here.
+
+config SERIAL_KS8695_CONSOLE
+ bool "Support for console on KS8695 (Centaur) serial port"
+ depends on SERIAL_KS8695=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a KS8695 (Centaur) UART as the
+ system console (the system console is the device which
+ receives all kernel messages and warnings and which allows
+ logins in single user mode).
+
config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
depends on ARM && ARCH_CLPS711X
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 4959bcb8d1ef..08ad0d978183 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 69715e556506..a8f894c78194 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -88,7 +88,7 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR];
/* these are located in their respective files */
void cpm_line_cr_cmd(int line, int cmd);
-int __init cpm_uart_init_portdesc(void);
+int cpm_uart_init_portdesc(void);
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index f23972bc00c0..b63ff8dd7304 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -482,7 +482,8 @@ static void cpm_uart_shutdown(struct uart_port *port)
}
static void cpm_uart_set_termios(struct uart_port *port,
- struct termios *termios, struct termios *old)
+ struct ktermios *termios,
+ struct ktermios *old)
{
int baud;
unsigned long flags;
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 925fb607d8c4..8c6324ed0202 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -125,7 +125,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
{
int dpmemsz, memsz;
u8 *dp_mem;
- uint dp_offset;
+ unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
@@ -133,7 +133,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
dp_offset = cpm_dpalloc(dpmemsz, 8);
- if (IS_DPERR(dp_offset)) {
+ if (IS_ERR_VALUE(dp_offset)) {
printk(KERN_ERR
"cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
return -ENOMEM;
@@ -185,7 +185,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
}
/* Setup any dynamic params in the uart desc */
-int __init cpm_uart_init_portdesc(void)
+int cpm_uart_init_portdesc(void)
{
pr_debug("CPM uart[-]:init portdesc\n");
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index fa455996ad8f..7b61d805ebe9 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -222,7 +222,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
{
int dpmemsz, memsz;
u8 *dp_mem;
- uint dp_offset;
+ unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
@@ -230,7 +230,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
dp_offset = cpm_dpalloc(dpmemsz, 8);
- if (IS_DPERR(dp_offset)) {
+ if (IS_ERR_VALUE(dp_offset)) {
printk(KERN_ERR
"cpm_uart_cpm.c: could not allocate buffer descriptors\n");
return -ENOMEM;
@@ -282,7 +282,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
}
/* Setup any dynamic params in the uart desc */
-int __init cpm_uart_init_portdesc(void)
+int cpm_uart_init_portdesc(void)
{
#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
u16 *addr;
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
new file mode 100644
index 000000000000..c5346d677315
--- /dev/null
+++ b/drivers/serial/serial_ks8695.c
@@ -0,0 +1,657 @@
+/*
+ * drivers/serial/serial_ks8695.c
+ *
+ * Driver for KS8695 serial ports
+ *
+ * Based on drivers/serial/serial_amba.c, by Kam Lee.
+ *
+ * Copyright 2002-2005 Micrel Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-uart.h>
+#include <asm/arch/regs-irq.h>
+
+#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+
+#define SERIAL_KS8695_MAJOR 204
+#define SERIAL_KS8695_MINOR 16
+#define SERIAL_KS8695_DEVNAME "ttyAM"
+
+#define SERIAL_KS8695_NR 1
+
+/*
+ * Access macros for the KS8695 UART
+ */
+#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF)
+#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH)
+#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC)
+#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC)
+#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS)
+#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS)
+#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC)
+#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC)
+#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC)
+#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC)
+#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD)
+#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD)
+
+#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST)
+
+#define UART_DUMMY_LSR_RX 0x100
+#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
+
+#define tx_enabled(port) ((port)->unused[0])
+#define rx_enabled(port) ((port)->unused[1])
+
+
+#ifdef SUPPORT_SYSRQ
+static struct console ks8695_console;
+#endif
+
+static void ks8695uart_stop_tx(struct uart_port *port)
+{
+ if (tx_enabled(port)) {
+ disable_irq(KS8695_IRQ_UART_TX);
+ tx_enabled(port) = 0;
+ }
+}
+
+static void ks8695uart_start_tx(struct uart_port *port)
+{
+ if (!tx_enabled(port)) {
+ enable_irq(KS8695_IRQ_UART_TX);
+ tx_enabled(port) = 1;
+ }
+}
+
+static void ks8695uart_stop_rx(struct uart_port *port)
+{
+ if (rx_enabled(port)) {
+ disable_irq(KS8695_IRQ_UART_RX);
+ rx_enabled(port) = 0;
+ }
+}
+
+static void ks8695uart_enable_ms(struct uart_port *port)
+{
+ enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+}
+
+static void ks8695uart_disable_ms(struct uart_port *port)
+{
+ disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+}
+
+static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, lsr, flg, max_count = 256;
+
+ status = UART_GET_LSR(port); /* clears pending LSR interrupts */
+ while ((status & URLS_URDR) && max_count--) {
+ ch = UART_GET_CHAR(port);
+ flg = TTY_NORMAL;
+
+ port->icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX;
+ if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) {
+ if (lsr & URLS_URBI) {
+ lsr &= ~(URLS_URFE | URLS_URPE);
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ }
+ if (lsr & URLS_URPE)
+ port->icount.parity++;
+ if (lsr & URLS_URFE)
+ port->icount.frame++;
+ if (lsr & URLS_URROE)
+ port->icount.overrun++;
+
+ lsr &= port->read_status_mask;
+
+ if (lsr & URLS_URBI)
+ flg = TTY_BREAK;
+ else if (lsr & URLS_URPE)
+ flg = TTY_PARITY;
+ else if (lsr & URLS_URFE)
+ flg = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ uart_insert_char(port, lsr, URLS_URROE, ch, flg);
+
+ignore_char:
+ status = UART_GET_LSR(port);
+ }
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct circ_buf *xmit = &port->info->xmit;
+ unsigned int count;
+
+ if (port->x_char) {
+ KS8695_CLR_TX_INT();
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return IRQ_HANDLED;
+ }
+
+ if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
+ ks8695uart_stop_tx(port);
+ return IRQ_HANDLED;
+ }
+
+ count = 16; /* fifo size */
+ while (!uart_circ_empty(xmit) && (count-- > 0)) {
+ KS8695_CLR_TX_INT();
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ ks8695uart_stop_tx(port);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned int status;
+
+ /*
+ * clear modem interrupt by reading MSR
+ */
+ status = UART_GET_MSR(port);
+
+ if (status & URMS_URDDCD)
+ uart_handle_dcd_change(port, status & URMS_URDDCD);
+
+ if (status & URMS_URDDST)
+ port->icount.dsr++;
+
+ if (status & URMS_URDCTS)
+ uart_handle_cts_change(port, status & URMS_URDCTS);
+
+ if (status & URMS_URTERI)
+ port->icount.rng++;
+
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int ks8695uart_tx_empty(struct uart_port *port)
+{
+ return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int ks8695uart_get_mctrl(struct uart_port *port)
+{
+ unsigned int result = 0;
+ unsigned int status;
+
+ status = UART_GET_MSR(port);
+ if (status & URMS_URDCD)
+ result |= TIOCM_CAR;
+ if (status & URMS_URDSR)
+ result |= TIOCM_DSR;
+ if (status & URMS_URCTS)
+ result |= TIOCM_CTS;
+ if (status & URMS_URRI)
+ result |= TIOCM_RI;
+
+ return result;
+}
+
+static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ unsigned int mcr;
+
+ mcr = UART_GET_MCR(port);
+ if (mctrl & TIOCM_RTS)
+ mcr |= URMC_URRTS;
+ else
+ mcr &= ~URMC_URRTS;
+
+ if (mctrl & TIOCM_DTR)
+ mcr |= URMC_URDTR;
+ else
+ mcr &= ~URMC_URDTR;
+
+ UART_PUT_MCR(port, mcr);
+}
+
+static void ks8695uart_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned int lcr;
+
+ lcr = UART_GET_LCR(port);
+
+ if (break_state == -1)
+ lcr |= URLC_URSBC;
+ else
+ lcr &= ~URLC_URSBC;
+
+ UART_PUT_LCR(port, lcr);
+}
+
+static int ks8695uart_startup(struct uart_port *port)
+{
+ int retval;
+
+ set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
+ tx_enabled(port) = 0;
+ rx_enabled(port) = 1;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port);
+ if (retval)
+ goto err_tx;
+
+ retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port);
+ if (retval)
+ goto err_rx;
+
+ retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port);
+ if (retval)
+ return err_ls;
+
+ retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port);
+ if (retval)
+ return err_ms;
+
+ return 0;
+
+err_ms:
+ free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
+err_ls:
+ free_irq(KS8695_IRQ_UART_RX, port);
+err_rx:
+ free_irq(KS8695_IRQ_UART_TX, port);
+err_tx:
+ return retval;
+}
+
+static void ks8695uart_shutdown(struct uart_port *port)
+{
+ /*
+ * Free the interrupt
+ */
+ free_irq(KS8695_IRQ_UART_RX, port);
+ free_irq(KS8695_IRQ_UART_TX, port);
+ free_irq(KS8695_IRQ_UART_MODEM_STATUS, port);
+ free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
+
+ /* disable break condition and fifos */
+ UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC);
+ UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE);
+}
+
+static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
+{
+ unsigned int lcr, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr = URCL_5;
+ break;
+ case CS6:
+ lcr = URCL_6;
+ break;
+ case CS7:
+ lcr = URCL_7;
+ break;
+ default:
+ lcr = URCL_8;
+ break;
+ }
+
+ /* stop bits */
+ if (termios->c_cflag & CSTOPB)
+ lcr |= URLC_URSB;
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
+ if (termios->c_cflag & PARODD)
+ lcr |= URPE_MARK;
+ else
+ lcr |= URPE_SPACE;
+ }
+ else if (termios->c_cflag & PARODD)
+ lcr |= URPE_ODD;
+ else
+ lcr |= URPE_EVEN;
+ }
+
+ if (port->fifosize > 1)
+ fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = URLS_URROE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= (URLS_URFE | URLS_URPE);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= URLS_URBI;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= (URLS_URFE | URLS_URPE);
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= URLS_URBI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= URLS_URROE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_LSR_RX;
+
+ /* first, disable everything */
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ ks8695uart_enable_ms(port);
+ else
+ ks8695uart_disable_ms(port);
+
+ /* Set baud rate */
+ UART_PUT_BRDR(port, quot);
+
+ UART_PUT_LCR(port, lcr);
+ UART_PUT_FCR(port, fcr);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *ks8695uart_type(struct uart_port *port)
+{
+ return port->type == PORT_KS8695 ? "KS8695" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void ks8695uart_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, UART_PORT_SIZE);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int ks8695uart_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, UART_PORT_SIZE,
+ "serial_ks8695") != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void ks8695uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_KS8695;
+ ks8695uart_request_port(port);
+ }
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695)
+ ret = -EINVAL;
+ if (ser->irq != port->irq)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops ks8695uart_pops = {
+ .tx_empty = ks8695uart_tx_empty,
+ .set_mctrl = ks8695uart_set_mctrl,
+ .get_mctrl = ks8695uart_get_mctrl,
+ .stop_tx = ks8695uart_stop_tx,
+ .start_tx = ks8695uart_start_tx,
+ .stop_rx = ks8695uart_stop_rx,
+ .enable_ms = ks8695uart_enable_ms,
+ .break_ctl = ks8695uart_break_ctl,
+ .startup = ks8695uart_startup,
+ .shutdown = ks8695uart_shutdown,
+ .set_termios = ks8695uart_set_termios,
+ .type = ks8695uart_type,
+ .release_port = ks8695uart_release_port,
+ .request_port = ks8695uart_request_port,
+ .config_port = ks8695uart_config_port,
+ .verify_port = ks8695uart_verify_port,
+};
+
+static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
+ {
+ .membase = (void *) KS8695_UART_VA,
+ .mapbase = KS8695_UART_VA,
+ .iotype = SERIAL_IO_MEM,
+ .irq = KS8695_IRQ_UART_TX,
+ .uartclk = CLOCK_TICK_RATE * 16,
+ .fifosize = 16,
+ .ops = &ks8695uart_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ }
+};
+
+#ifdef CONFIG_SERIAL_KS8695_CONSOLE
+static void ks8695_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(UART_GET_LSR(port) & URLS_URTHRE))
+ barrier();
+
+ UART_PUT_CHAR(port, ch);
+}
+
+static void ks8695_console_write(struct console *co, const char *s, u_int count)
+{
+ struct uart_port *port = ks8695uart_ports + co->index;
+
+ uart_console_write(port, s, count, ks8695_console_putchar);
+}
+
+static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+{
+ unsigned int lcr;
+
+ lcr = UART_GET_LCR(port);
+
+ switch (lcr & URLC_PARITY) {
+ case URPE_ODD:
+ *parity = 'o';
+ break;
+ case URPE_EVEN:
+ *parity = 'e';
+ break;
+ default:
+ *parity = 'n';
+ }
+
+ switch (lcr & URLC_URCL) {
+ case URCL_5:
+ *bits = 5;
+ break;
+ case URCL_6:
+ *bits = 6;
+ break;
+ case URCL_7:
+ *bits = 7;
+ break;
+ default:
+ *bits = 8;
+ }
+
+ *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF);
+ *baud /= 16;
+ *baud &= 0xFFFFFFF0;
+}
+
+static int __init ks8695_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ ks8695_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver ks8695_reg;
+
+static struct console ks8695_console = {
+ .name = SERIAL_KS8695_DEVNAME,
+ .write = ks8695_console_write,
+ .device = uart_console_device,
+ .setup = ks8695_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &ks8695_reg,
+};
+
+static int __init ks8695_console_init(void)
+{
+ register_console(&ks8695_console);
+ return 0;
+}
+
+console_initcall(ks8695_console_init);
+
+#define KS8695_CONSOLE &ks8695_console
+#else
+#define KS8695_CONSOLE NULL
+#endif
+
+static struct uart_driver ks8695_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial_ks8695",
+ .dev_name = SERIAL_KS8695_DEVNAME,
+ .major = SERIAL_KS8695_MAJOR,
+ .minor = SERIAL_KS8695_MINOR,
+ .nr = SERIAL_KS8695_NR,
+ .cons = KS8695_CONSOLE,
+};
+
+static int __init ks8695uart_init(void)
+{
+ int i, ret;
+
+ printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n");
+
+ ret = uart_register_driver(&ks8695_reg);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < SERIAL_KS8695_NR; i++)
+ uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]);
+
+ return 0;
+}
+
+static void __exit ks8695uart_exit(void)
+{
+ int i;
+
+ for (i = 0; i < SERIAL_KS8695_NR; i++)
+ uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]);
+ uart_unregister_driver(&ks8695_reg);
+}
+
+module_init(ks8695uart_init);
+module_exit(ks8695uart_exit);
+
+MODULE_DESCRIPTION("KS8695 serial port driver");
+MODULE_AUTHOR("Micrel Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 40d48566215c..c3a6bd2e7950 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -493,6 +493,10 @@ static struct of_device_id hv_match[] = {
.name = "console",
.compatible = "qcn",
},
+ {
+ .name = "console",
+ .compatible = "SUNW,sun4v-console",
+ },
{},
};
MODULE_DEVICE_TABLE(of, hv_match);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index da73205e54cd..0985193dc57d 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -92,6 +92,8 @@ struct uart_sunzilog_port {
#define SUNZILOG_FLAG_REGS_HELD 0x00000040
#define SUNZILOG_FLAG_TX_STOPPED 0x00000080
#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100
+#define SUNZILOG_FLAG_ESCC 0x00000200
+#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400
unsigned int cflag;
@@ -174,9 +176,11 @@ static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
/* This function must only be called when the TX is not busy. The UART
* port lock must be held and local interrupts disabled.
*/
-static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
+static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
{
int i;
+ int escc;
+ unsigned char r15;
/* Let pending transmits finish. */
for (i = 0; i < 1000; i++) {
@@ -229,11 +233,25 @@ static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *
write_zsreg(channel, R14, regs[R14]);
/* External status interrupt control. */
- write_zsreg(channel, R15, regs[R15]);
+ write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN);
+
+ /* ESCC Extension Register */
+ r15 = read_zsreg(channel, R15);
+ if (r15 & 0x01) {
+ write_zsreg(channel, R7, regs[R7p]);
+
+ /* External status interrupt and FIFO control. */
+ write_zsreg(channel, R15, regs[R15] & ~WR7pEN);
+ escc = 1;
+ } else {
+ /* Clear FIFO bit case it is an issue */
+ regs[R15] &= ~FIFOEN;
+ escc = 0;
+ }
/* Reset external status interrupts. */
- write_zsreg(channel, R0, RES_EXT_INT);
- write_zsreg(channel, R0, RES_EXT_INT);
+ write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */
+ write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */
/* Rewrite R3/R5, this time without enables masked. */
write_zsreg(channel, R3, regs[R3]);
@@ -241,6 +259,8 @@ static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *
/* Rewrite R1, this time without IRQ enabled masked. */
write_zsreg(channel, R1, regs[R1]);
+
+ return escc;
}
/* Reprogram the Zilog channel HW registers with the copies found in the
@@ -731,7 +751,7 @@ static void sunzilog_enable_ms(struct uart_port *port)
up->curregs[R15] = new_reg;
/* NOTE: Not subject to 'transmitter active' rule. */
- write_zsreg(channel, R15, up->curregs[R15]);
+ write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN);
}
}
@@ -861,44 +881,44 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
up->curregs[R14] = BRSRC | BRENAB;
/* Character size, stop bits, and parity. */
- up->curregs[3] &= ~RxN_MASK;
- up->curregs[5] &= ~TxN_MASK;
+ up->curregs[R3] &= ~RxN_MASK;
+ up->curregs[R5] &= ~TxN_MASK;
switch (cflag & CSIZE) {
case CS5:
- up->curregs[3] |= Rx5;
- up->curregs[5] |= Tx5;
+ up->curregs[R3] |= Rx5;
+ up->curregs[R5] |= Tx5;
up->parity_mask = 0x1f;
break;
case CS6:
- up->curregs[3] |= Rx6;
- up->curregs[5] |= Tx6;
+ up->curregs[R3] |= Rx6;
+ up->curregs[R5] |= Tx6;
up->parity_mask = 0x3f;
break;
case CS7:
- up->curregs[3] |= Rx7;
- up->curregs[5] |= Tx7;
+ up->curregs[R3] |= Rx7;
+ up->curregs[R5] |= Tx7;
up->parity_mask = 0x7f;
break;
case CS8:
default:
- up->curregs[3] |= Rx8;
- up->curregs[5] |= Tx8;
+ up->curregs[R3] |= Rx8;
+ up->curregs[R5] |= Tx8;
up->parity_mask = 0xff;
break;
};
- up->curregs[4] &= ~0x0c;
+ up->curregs[R4] &= ~0x0c;
if (cflag & CSTOPB)
- up->curregs[4] |= SB2;
+ up->curregs[R4] |= SB2;
else
- up->curregs[4] |= SB1;
+ up->curregs[R4] |= SB1;
if (cflag & PARENB)
- up->curregs[4] |= PAR_ENAB;
+ up->curregs[R4] |= PAR_ENAB;
else
- up->curregs[4] &= ~PAR_ENAB;
+ up->curregs[R4] &= ~PAR_ENAB;
if (!(cflag & PARODD))
- up->curregs[4] |= PAR_EVEN;
+ up->curregs[R4] |= PAR_EVEN;
else
- up->curregs[4] &= ~PAR_EVEN;
+ up->curregs[R4] &= ~PAR_EVEN;
up->port.read_status_mask = Rx_OVR;
if (iflag & INPCK)
@@ -952,7 +972,9 @@ sunzilog_set_termios(struct uart_port *port, struct ktermios *termios,
static const char *sunzilog_type(struct uart_port *port)
{
- return "zs";
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+
+ return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs";
}
/* We do not request/release mappings of the registers here, this
@@ -1170,7 +1192,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
spin_lock_irqsave(&up->port.lock, flags);
- up->curregs[R15] = BRKIE;
+ up->curregs[R15] |= BRKIE;
sunzilog_convert_to_zs(up, con->cflag, 0, brg);
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
@@ -1229,7 +1251,7 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
baud = 4800;
}
- up->curregs[R15] = BRKIE;
+ up->curregs[R15] |= BRKIE;
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
sunzilog_convert_to_zs(up, up->cflag, 0, brg);
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
@@ -1283,8 +1305,18 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
SUNZILOG_FLAG_CONS_MOUSE)) {
+ up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+ up->curregs[R3] = RxENAB | Rx8;
+ up->curregs[R5] = TxENAB | Tx8;
+ up->curregs[R6] = 0x00; /* SDLC Address */
+ up->curregs[R7] = 0x7E; /* SDLC Flag */
+ up->curregs[R9] = NV;
+ up->curregs[R7p] = 0x00;
sunzilog_init_kbdms(up, up->port.line);
- up->curregs[R9] |= (NV | MIE);
+ /* Only enable interrupts if an ISR handler available */
+ if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
+ up->curregs[R9] |= MIE;
write_zsreg(channel, R9, up->curregs[R9]);
} else {
/* Normal serial TTY. */
@@ -1293,7 +1325,9 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
up->curregs[R3] = RxENAB | Rx8;
up->curregs[R5] = TxENAB | Tx8;
- up->curregs[R9] = NV | MIE;
+ up->curregs[R6] = 0x00; /* SDLC Address */
+ up->curregs[R7] = 0x7E; /* SDLC Flag */
+ up->curregs[R9] = NV;
up->curregs[R10] = NRZ;
up->curregs[R11] = TCBR | RCBR;
baud = 9600;
@@ -1301,7 +1335,14 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
up->curregs[R12] = (brg & 0xff);
up->curregs[R13] = (brg >> 8) & 0xff;
up->curregs[R14] = BRSRC | BRENAB;
- __load_zsregs(channel, up->curregs);
+ up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */
+ up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL;
+ if (__load_zsregs(channel, up->curregs)) {
+ up->flags |= SUNZILOG_FLAG_ESCC;
+ }
+ /* Only enable interrupts if an ISR handler available */
+ if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
+ up->curregs[R9] |= MIE;
write_zsreg(channel, R9, up->curregs[R9]);
}
@@ -1390,12 +1431,14 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
return err;
}
} else {
- printk(KERN_INFO "%s: Keyboard at MMIO %lx (irq = %d) "
- "is a zs\n",
- op->dev.bus_id, up[0].port.mapbase, op->irqs[0]);
- printk(KERN_INFO "%s: Mouse at MMIO %lx (irq = %d) "
- "is a zs\n",
- op->dev.bus_id, up[1].port.mapbase, op->irqs[0]);
+ printk(KERN_INFO "%s: Keyboard at MMIO 0x%lx (irq = %d) "
+ "is a %s\n",
+ op->dev.bus_id, up[0].port.mapbase, op->irqs[0],
+ sunzilog_type (&up[0].port));
+ printk(KERN_INFO "%s: Mouse at MMIO 0x%lx (irq = %d) "
+ "is a %s\n",
+ op->dev.bus_id, up[1].port.mapbase, op->irqs[0],
+ sunzilog_type (&up[1].port));
}
dev_set_drvdata(&op->dev, &up[0]);
@@ -1487,10 +1530,23 @@ static int __init sunzilog_init(void)
goto out_unregister_uart;
if (zilog_irq != -1) {
+ struct uart_sunzilog_port *up = sunzilog_irq_chain;
err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
"zs", sunzilog_irq_chain);
if (err)
goto out_unregister_driver;
+
+ /* Enable Interrupts */
+ while (up) {
+ struct zilog_channel __iomem *channel;
+
+ /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->flags |= SUNZILOG_FLAG_ISR_HANDLER;
+ up->curregs[R9] |= MIE;
+ write_zsreg(channel, R9, up->curregs[R9]);
+ up = up->next;
+ }
}
out:
@@ -1515,6 +1571,20 @@ static void __exit sunzilog_exit(void)
of_unregister_driver(&zs_driver);
if (zilog_irq != -1) {
+ struct uart_sunzilog_port *up = sunzilog_irq_chain;
+
+ /* Disable Interrupts */
+ while (up) {
+ struct zilog_channel __iomem *channel;
+
+ /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER;
+ up->curregs[R9] &= ~MIE;
+ write_zsreg(channel, R9, up->curregs[R9]);
+ up = up->next;
+ }
+
free_irq(zilog_irq, sunzilog_irq_chain);
zilog_irq = -1;
}
diff --git a/drivers/serial/sunzilog.h b/drivers/serial/sunzilog.h
index 7939b6d71270..5dec7b47cc38 100644
--- a/drivers/serial/sunzilog.h
+++ b/drivers/serial/sunzilog.h
@@ -13,7 +13,8 @@ struct zilog_layout {
struct zilog_channel channelA;
};
-#define NUM_ZSREGS 16
+#define NUM_ZSREGS 17
+#define R7p 16 /* Written as R7 with P15 bit 0 set */
/* Conversion routines to/from brg time constants from/to bits
* per second.
@@ -127,6 +128,15 @@ struct zilog_layout {
/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
+/* Write Register 7' (ESCC Only) */
+#define AUTO_TxFLAG 1 /* Automatic Tx SDLC Flag */
+#define AUTO_EOM_RST 2 /* Automatic EOM Reset */
+#define AUTOnRTS 4 /* Automatic /RTS pin deactivation */
+#define RxFIFO_LVL 8 /* Receive FIFO interrupt level */
+#define nDTRnREQ 0x10 /* /DTR/REQ timing */
+#define TxFIFO_LVL 0x20 /* Transmit FIFO interrupt level */
+#define EXT_RD_EN 0x40 /* Extended read register enable */
+
/* Write Register 8 (transmit buffer) */
/* Write Register 9 (Master interrupt control) */
@@ -135,6 +145,7 @@ struct zilog_layout {
#define DLC 4 /* Disable Lower Chain */
#define MIE 8 /* Master Interrupt Enable */
#define STATHI 0x10 /* Status high */
+#define SWIACK 0x20 /* Software Interrupt Ack (not on NMOS) */
#define NORESET 0 /* No reset on write to R9 */
#define CHRB 0x40 /* Reset channel B */
#define CHRA 0x80 /* Reset channel A */
@@ -187,7 +198,9 @@ struct zilog_layout {
#define SNRZI 0xe0 /* Set NRZI mode */
/* Write Register 15 (external/status interrupt control) */
+#define WR7pEN 1 /* WR7' Enable (ESCC only) */
#define ZCIE 2 /* Zero count IE */
+#define FIFOEN 4 /* FIFO Enable (ESCC only) */
#define DCDIE 8 /* DCD IE */
#define SYNCIE 0x10 /* Sync/hunt IE */
#define CTSIE 0x20 /* CTS IE */
@@ -241,6 +254,10 @@ struct zilog_layout {
#define CHATxIP 0x10 /* Channel A Tx IP */
#define CHARxIP 0x20 /* Channel A Rx IP */
+/* Read Register 6 (LSB frame byte count [Not on NMOS]) */
+
+/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */
+
/* Read Register 8 (receive data register) */
/* Read Register 10 (misc status bits) */
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 01:12:38 +0100