summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/21285.c8
-rw-r--r--drivers/serial/8250.c42
-rw-r--r--drivers/serial/8250_pci.c133
-rw-r--r--drivers/serial/8250_pnp.c10
-rw-r--r--drivers/serial/Kconfig27
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/atmel_serial.c3
-rw-r--r--drivers/serial/atmel_serial.h127
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/serial/dz.c2
-rw-r--r--drivers/serial/icom.h2
-rw-r--r--drivers/serial/imx.c4
-rw-r--r--drivers/serial/mcf.c2
-rw-r--r--drivers/serial/mpsc.c1
-rw-r--r--drivers/serial/mux.c2
-rw-r--r--drivers/serial/s3c2410.c2
-rw-r--r--drivers/serial/sc26xx.c755
-rw-r--r--drivers/serial/serial_core.c20
-rw-r--r--drivers/serial/serial_cs.c6
-rw-r--r--drivers/serial/uartlite.c2
20 files changed, 972 insertions, 179 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 6a48dfa1efe8..0276471cb25e 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -237,6 +237,12 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
+ if (port->info && port->info->tty) {
+ struct tty_struct *tty = port->info->tty;
+ unsigned int b = port->uartclk / (16 * quot);
+ tty_encode_baud_rate(tty, b, b);
+ }
+
switch (termios->c_cflag & CSIZE) {
case CS5:
h_lcr = 0x00;
@@ -277,8 +283,6 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_iflag & INPCK)
port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
- tty_encode_baud_rate(tty, baud, baud);
-
/*
* Which character status flags should we ignore?
*/
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index f94109cbb46e..b8a4bd94f51d 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2047,7 +2047,7 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
* Oxford Semi 952 rev B workaround
*/
if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
- quot ++;
+ quot++;
if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
if (baud < 2400)
@@ -2662,16 +2662,17 @@ static int __devinit serial8250_probe(struct platform_device *dev)
memset(&port, 0, sizeof(struct uart_port));
for (i = 0; p && p->flags != 0; p++, i++) {
- port.iobase = p->iobase;
- port.membase = p->membase;
- port.irq = p->irq;
- port.uartclk = p->uartclk;
- port.regshift = p->regshift;
- port.iotype = p->iotype;
- port.flags = p->flags;
- port.mapbase = p->mapbase;
- port.hub6 = p->hub6;
- port.dev = &dev->dev;
+ port.iobase = p->iobase;
+ port.membase = p->membase;
+ port.irq = p->irq;
+ port.uartclk = p->uartclk;
+ port.regshift = p->regshift;
+ port.iotype = p->iotype;
+ port.flags = p->flags;
+ port.mapbase = p->mapbase;
+ port.hub6 = p->hub6;
+ port.private_data = p->private_data;
+ port.dev = &dev->dev;
if (share_irqs)
port.flags |= UPF_SHARE_IRQ;
ret = serial8250_register_port(&port);
@@ -2812,15 +2813,16 @@ int serial8250_register_port(struct uart_port *port)
if (uart) {
uart_remove_one_port(&serial8250_reg, &uart->port);
- uart->port.iobase = port->iobase;
- uart->port.membase = port->membase;
- uart->port.irq = port->irq;
- uart->port.uartclk = port->uartclk;
- uart->port.fifosize = port->fifosize;
- uart->port.regshift = port->regshift;
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
- uart->port.mapbase = port->mapbase;
+ uart->port.iobase = port->iobase;
+ uart->port.membase = port->membase;
+ uart->port.irq = port->irq;
+ uart->port.uartclk = port->uartclk;
+ uart->port.fifosize = port->fifosize;
+ uart->port.regshift = port->regshift;
+ uart->port.iotype = port->iotype;
+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = port->mapbase;
+ uart->port.private_data = port->private_data;
if (port->dev)
uart->port.dev = port->dev;
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index ceb03c9e749f..0a4ac2b6eb5a 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -106,6 +106,32 @@ setup_port(struct serial_private *priv, struct uart_port *port,
}
/*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+static int addidata_apci7800_setup(struct serial_private *priv,
+ struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = 0, offset = board->first_offset;
+ bar = FL_GET_BASE(board->flags);
+
+ if (idx < 2) {
+ offset += idx * board->uart_offset;
+ } else if ((idx >= 2) && (idx < 4)) {
+ bar += 1;
+ offset += ((idx - 2) * board->uart_offset);
+ } else if ((idx >= 4) && (idx < 6)) {
+ bar += 2;
+ offset += ((idx - 4) * board->uart_offset);
+ } else if (idx >= 6) {
+ bar += 3;
+ offset += ((idx - 6) * board->uart_offset);
+ }
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
* AFAVLAB uses a different mixture of BARs and offsets
* Not that ugly ;) -- HW
*/
@@ -752,6 +778,16 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
*/
static struct pci_serial_quirk pci_serial_quirks[] = {
/*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ADDIDATA_OLD,
+ .device = PCI_DEVICE_ID_ADDIDATA_APCI7800,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = addidata_apci7800_setup,
+ },
+ /*
* AFAVLAB cards - these may be called via parport_serial
* It is not clear whether this applies to all products.
*/
@@ -1179,6 +1215,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.base_baud = 115200,
.uart_offset = 8,
},
+ [pbn_b0_8_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[pbn_b0_1_921600] = {
.flags = FL_BASE0,
@@ -2697,6 +2739,97 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_pasemi_1682M },
/*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA_OLD,
+ PCI_DEVICE_ID_ADDIDATA_APCI7800,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b1_8_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_8_115200 },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 1de098e75497..6f09cbd7fc48 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -414,8 +414,9 @@ static int __devinit check_resources(struct pnp_option *option)
*/
static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
{
- if (!(check_name(pnp_dev_name(dev)) || (dev->card && check_name(dev->card->name))))
- return -ENODEV;
+ if (!(check_name(pnp_dev_name(dev)) ||
+ (dev->card && check_name(dev->card->name))))
+ return -ENODEV;
if (check_resources(dev->independent))
return 0;
@@ -452,8 +453,9 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
return -ENODEV;
#ifdef SERIAL_DEBUG_PNP
- printk("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
- port.iobase, port.mapbase, port.irq, port.iotype);
+ printk(KERN_DEBUG
+ "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
+ port.iobase, port.mapbase, port.irq, port.iotype);
#endif
port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 8a053ea21e1d..6a44fb1dc167 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -877,15 +877,15 @@ config SERIAL_SUNHV
systems. Say Y if you want to be able to use this device.
config SERIAL_IP22_ZILOG
- tristate "IP22 Zilog8530 serial support"
- depends on SGI_IP22
+ tristate "SGI Zilog8530 serial support"
+ depends on SGI_HAS_ZILOG
select SERIAL_CORE
help
- This driver supports the Zilog8530 serial ports found on SGI IP22
+ This driver supports the Zilog8530 serial ports found on SGI
systems. Say Y or M if you want to be able to these serial ports.
config SERIAL_IP22_ZILOG_CONSOLE
- bool "Console on IP22 Zilog8530 serial port"
+ bool "Console on SGI Zilog8530 serial port"
depends on SERIAL_IP22_ZILOG=y
select SERIAL_CORE_CONSOLE
@@ -1295,8 +1295,8 @@ config SERIAL_NETX_CONSOLE
depends on SERIAL_NETX
select SERIAL_CORE_CONSOLE
help
- If you have enabled the serial port on the Motorola IMX
- CPU you can make it the console by answering Y to this option.
+ If you have enabled the serial port on the Hilscher NetX SoC
+ you can make it the console by answering Y to this option.
config SERIAL_OF_PLATFORM
tristate "Serial port on Open Firmware platform bus"
@@ -1318,4 +1318,19 @@ config SERIAL_QE
This driver supports the QE serial ports on Freescale embedded
PowerPC that contain a QUICC Engine.
+config SERIAL_SC26XX
+ tristate "SC2681/SC2692 serial port support"
+ depends on SNI_RM
+ select SERIAL_CORE
+ help
+ This is a driver for the onboard serial ports of
+ older RM400 machines.
+
+config SERIAL_SC26XX_CONSOLE
+ bool "Console on SC2681/SC2692 serial port"
+ depends on SERIAL_SC26XX
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for Console on SC2681/SC2692 serial ports.
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 2dd41b4cc8db..640cfe44a56d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o
obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
+obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o
obj-$(CONFIG_SERIAL_JSM) += jsm/
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 111da57f5334..60f52904aad0 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -34,6 +34,7 @@
#include <linux/tty_flip.h>
#include <linux/platform_device.h>
#include <linux/atmel_pdc.h>
+#include <linux/atmel_serial.h>
#include <asm/io.h>
@@ -45,8 +46,6 @@
#include <asm/arch/gpio.h>
#endif
-#include "atmel_serial.h"
-
#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h
deleted file mode 100644
index e0141776517c..000000000000
--- a/drivers/serial/atmel_serial.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * drivers/serial/atmel_serial.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * USART registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef ATMEL_SERIAL_H
-#define ATMEL_SERIAL_H
-
-#define ATMEL_US_CR 0x00 /* Control Register */
-#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */
-#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */
-#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */
-#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */
-#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */
-#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */
-#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */
-#define ATMEL_US_STTBRK (1 << 9) /* Start Break */
-#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */
-#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */
-#define ATMEL_US_SENDA (1 << 12) /* Send Address */
-#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */
-#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
-#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */
-#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */
-#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */
-#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */
-#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */
-
-#define ATMEL_US_MR 0x04 /* Mode Register */
-#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */
-#define ATMEL_US_USMODE_NORMAL 0
-#define ATMEL_US_USMODE_RS485 1
-#define ATMEL_US_USMODE_HWHS 2
-#define ATMEL_US_USMODE_MODEM 3
-#define ATMEL_US_USMODE_ISO7816_T0 4
-#define ATMEL_US_USMODE_ISO7816_T1 6
-#define ATMEL_US_USMODE_IRDA 8
-#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
-#define ATMEL_US_USCLKS_MCK (0 << 4)
-#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
-#define ATMEL_US_USCLKS_SCK (3 << 4)
-#define ATMEL_US_CHRL (3 << 6) /* Character Length */
-#define ATMEL_US_CHRL_5 (0 << 6)
-#define ATMEL_US_CHRL_6 (1 << 6)
-#define ATMEL_US_CHRL_7 (2 << 6)
-#define ATMEL_US_CHRL_8 (3 << 6)
-#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */
-#define ATMEL_US_PAR (7 << 9) /* Parity Type */
-#define ATMEL_US_PAR_EVEN (0 << 9)
-#define ATMEL_US_PAR_ODD (1 << 9)
-#define ATMEL_US_PAR_SPACE (2 << 9)
-#define ATMEL_US_PAR_MARK (3 << 9)
-#define ATMEL_US_PAR_NONE (4 << 9)
-#define ATMEL_US_PAR_MULTI_DROP (6 << 9)
-#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */
-#define ATMEL_US_NBSTOP_1 (0 << 12)
-#define ATMEL_US_NBSTOP_1_5 (1 << 12)
-#define ATMEL_US_NBSTOP_2 (2 << 12)
-#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */
-#define ATMEL_US_CHMODE_NORMAL (0 << 14)
-#define ATMEL_US_CHMODE_ECHO (1 << 14)
-#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14)
-#define ATMEL_US_CHMODE_REM_LOOP (3 << 14)
-#define ATMEL_US_MSBF (1 << 16) /* Bit Order */
-#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */
-#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */
-#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */
-#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
-#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */
-#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */
-#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
-
-#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
-#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */
-#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */
-#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */
-#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */
-#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
-#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */
-#define ATMEL_US_FRAME (1 << 6) /* Framing Error */
-#define ATMEL_US_PARE (1 << 7) /* Parity Error */
-#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */
-#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */
-#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
-#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
-#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */
-#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */
-#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */
-#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */
-#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */
-#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */
-#define ATMEL_US_RI (1 << 20) /* RI */
-#define ATMEL_US_DSR (1 << 21) /* DSR */
-#define ATMEL_US_DCD (1 << 22) /* DCD */
-#define ATMEL_US_CTS (1 << 23) /* CTS */
-
-#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
-#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
-#define ATMEL_US_CSR 0x14 /* Channel Status Register */
-#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
-#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
-#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
-
-#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
-#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
-
-#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */
-#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */
-
-#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
-#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */
-
-#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
-#define ATMEL_US_NER 0x44 /* Number of Errors Register */
-#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
-
-#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index b5e4478de0e3..236af9d33851 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -380,7 +380,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
static irqreturn_t cpm_uart_int(int irq, void *data)
{
u8 events;
- struct uart_port *port = (struct uart_port *)data;
+ struct uart_port *port = data;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
smc_t __iomem *smcp = pinfo->smcp;
scc_t __iomem *sccp = pinfo->sccp;
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index d31721f2744d..bbae5a220219 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -324,7 +324,7 @@ static inline void check_modem_status(struct dz_port *dport)
*/
static irqreturn_t dz_interrupt(int irq, void *dev)
{
- struct dz_port *dport = (struct dz_port *)dev;
+ struct dz_port *dport = dev;
unsigned short status;
/* get the reason why we just got an irq */
diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h
index 027455496745..c8029e0025c9 100644
--- a/drivers/serial/icom.h
+++ b/drivers/serial/icom.h
@@ -20,7 +20,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include<linux/serial_core.h>
+#include <linux/serial_core.h>
#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1)
static int icom_acfg_baud[] = {
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index dc1967176fe2..56af1f566a4c 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -308,7 +308,7 @@ static void imx_start_tx(struct uart_port *port)
static irqreturn_t imx_rtsint(int irq, void *dev_id)
{
- struct imx_port *sport = (struct imx_port *)dev_id;
+ struct imx_port *sport = dev_id;
unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
unsigned long flags;
@@ -324,7 +324,7 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id)
static irqreturn_t imx_txint(int irq, void *dev_id)
{
- struct imx_port *sport = (struct imx_port *)dev_id;
+ struct imx_port *sport = dev_id;
struct circ_buf *xmit = &sport->port.info->xmit;
unsigned long flags;
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 051fcc2f5ba8..e76fc72c9b36 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -434,7 +434,7 @@ static struct uart_ops mcf_uart_ops = {
static struct mcf_uart mcf_ports[3];
-#define MCF_MAXPORTS (sizeof(mcf_ports) / sizeof(struct mcf_uart))
+#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports)
/****************************************************************************/
#if defined(CONFIG_SERIAL_MCF_CONSOLE)
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index 4d643c926657..cb3a91967742 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -612,6 +612,7 @@ static void mpsc_hw_init(struct mpsc_port_info *pi)
/* No preamble, 16x divider, low-latency, */
writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
+ mpsc_set_baudrate(pi, pi->default_baud);
if (pi->mirror_regs) {
pi->MPSC_CHR_1_m = 0;
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 83211013deb8..e94031731a47 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -582,7 +582,7 @@ static struct parisc_driver serial_mux_driver = {
};
/**
- * mux_init - Serial MUX initalization procedure.
+ * mux_init - Serial MUX initialization procedure.
*
* Register the Serial MUX driver.
*/
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index e773c8e14962..45de19366030 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1527,7 +1527,7 @@ static inline void s3c2440_serial_exit(void)
#define s3c2440_uart_inf_at NULL
#endif /* CONFIG_CPU_S3C2440 */
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#if defined(CONFIG_CPU_S3C2412)
static int s3c2412_serial_setsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c
new file mode 100644
index 000000000000..a350b6d2a181
--- /dev/null
+++ b/drivers/serial/sc26xx.c
@@ -0,0 +1,755 @@
+/*
+ * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices.
+ *
+ * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#if defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#define SC26XX_MAJOR 204
+#define SC26XX_MINOR_START 205
+#define SC26XX_NR 2
+
+struct uart_sc26xx_port {
+ struct uart_port port[2];
+ u8 dsr_mask[2];
+ u8 cts_mask[2];
+ u8 dcd_mask[2];
+ u8 ri_mask[2];
+ u8 dtr_mask[2];
+ u8 rts_mask[2];
+ u8 imr;
+};
+
+/* register common to both ports */
+#define RD_ISR 0x14
+#define RD_IPR 0x34
+
+#define WR_ACR 0x10
+#define WR_IMR 0x14
+#define WR_OPCR 0x34
+#define WR_OPR_SET 0x38
+#define WR_OPR_CLR 0x3C
+
+/* access common register */
+#define READ_SC(p, r) readb((p)->membase + RD_##r)
+#define WRITE_SC(p, r, v) writeb((v), (p)->membase + WR_##r)
+
+/* register per port */
+#define RD_PORT_MRx 0x00
+#define RD_PORT_SR 0x04
+#define RD_PORT_RHR 0x0c
+
+#define WR_PORT_MRx 0x00
+#define WR_PORT_CSR 0x04
+#define WR_PORT_CR 0x08
+#define WR_PORT_THR 0x0c
+
+/* SR bits */
+#define SR_BREAK (1 << 7)
+#define SR_FRAME (1 << 6)
+#define SR_PARITY (1 << 5)
+#define SR_OVERRUN (1 << 4)
+#define SR_TXRDY (1 << 2)
+#define SR_RXRDY (1 << 0)
+
+#define CR_RES_MR (1 << 4)
+#define CR_RES_RX (2 << 4)
+#define CR_RES_TX (3 << 4)
+#define CR_STRT_BRK (6 << 4)
+#define CR_STOP_BRK (7 << 4)
+#define CR_DIS_TX (1 << 3)
+#define CR_ENA_TX (1 << 2)
+#define CR_DIS_RX (1 << 1)
+#define CR_ENA_RX (1 << 0)
+
+/* ISR bits */
+#define ISR_RXRDYB (1 << 5)
+#define ISR_TXRDYB (1 << 4)
+#define ISR_RXRDYA (1 << 1)
+#define ISR_TXRDYA (1 << 0)
+
+/* IMR bits */
+#define IMR_RXRDY (1 << 1)
+#define IMR_TXRDY (1 << 0)
+
+/* access port register */
+static inline u8 read_sc_port(struct uart_port *p, u8 reg)
+{
+ return readb(p->membase + p->line * 0x20 + reg);
+}
+
+static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val)
+{
+ writeb(val, p->membase + p->line * 0x20 + reg);
+}
+
+#define READ_SC_PORT(p, r) read_sc_port(p, RD_PORT_##r)
+#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v)
+
+static void sc26xx_enable_irq(struct uart_port *port, int mask)
+{
+ struct uart_sc26xx_port *up;
+ int line = port->line;
+
+ port -= line;
+ up = container_of(port, struct uart_sc26xx_port, port[0]);
+
+ up->imr |= mask << (line * 4);
+ WRITE_SC(port, IMR, up->imr);
+}
+
+static void sc26xx_disable_irq(struct uart_port *port, int mask)
+{
+ struct uart_sc26xx_port *up;
+ int line = port->line;
+
+ port -= line;
+ up = container_of(port, struct uart_sc26xx_port, port[0]);
+
+ up->imr &= ~(mask << (line * 4));
+ WRITE_SC(port, IMR, up->imr);
+}
+
+static struct tty_struct *receive_chars(struct uart_port *port)
+{
+ struct tty_struct *tty = NULL;
+ int limit = 10000;
+ unsigned char ch;
+ char flag;
+ u8 status;
+
+ if (port->info != NULL) /* Unopened serial console */
+ tty = port->info->tty;
+
+ while (limit-- > 0) {
+ status = READ_SC_PORT(port, SR);
+ if (!(status & SR_RXRDY))
+ break;
+ ch = READ_SC_PORT(port, RHR);
+
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (unlikely(status & (SR_BREAK | SR_FRAME |
+ SR_PARITY | SR_OVERRUN))) {
+ if (status & SR_BREAK) {
+ status &= ~(SR_PARITY | SR_FRAME);
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (status & SR_PARITY)
+ port->icount.parity++;
+ else if (status & SR_FRAME)
+ port->icount.frame++;
+ if (status & SR_OVERRUN)
+ port->icount.overrun++;
+
+ status &= port->read_status_mask;
+ if (status & SR_BREAK)
+ flag = TTY_BREAK;
+ else if (status & SR_PARITY)
+ flag = TTY_PARITY;
+ else if (status & SR_FRAME)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
+ if (status & port->ignore_status_mask)
+ continue;
+
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ return tty;
+}
+
+static void transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit;
+
+ if (!port->info)
+ return;
+
+ xmit = &port->info->xmit;
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ sc26xx_disable_irq(port, IMR_TXRDY);
+ return;
+ }
+ while (!uart_circ_empty(xmit)) {
+ if (!(READ_SC_PORT(port, SR) & SR_TXRDY))
+ break;
+
+ WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
+{
+ struct uart_sc26xx_port *up = dev_id;
+ struct tty_struct *tty;
+ unsigned long flags;
+ u8 isr;
+
+ spin_lock_irqsave(&up->port[0].lock, flags);
+
+ tty = NULL;
+ isr = READ_SC(&up->port[0], ISR);
+ if (isr & ISR_TXRDYA)
+ transmit_chars(&up->port[0]);
+ if (isr & ISR_RXRDYA)
+ tty = receive_chars(&up->port[0]);
+
+ spin_unlock(&up->port[0].lock);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ spin_lock(&up->port[1].lock);
+
+ tty = NULL;
+ if (isr & ISR_TXRDYB)
+ transmit_chars(&up->port[1]);
+ if (isr & ISR_RXRDYB)
+ tty = receive_chars(&up->port[1]);
+
+ spin_unlock_irqrestore(&up->port[1].lock, flags);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+/* port->lock is not held. */
+static unsigned int sc26xx_tx_empty(struct uart_port *port)
+{
+ return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0;
+}
+
+/* port->lock held by caller. */
+static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_sc26xx_port *up;
+ int line = port->line;
+
+ port -= line;
+ up = container_of(port, struct uart_sc26xx_port, port[0]);
+
+ if (up->dtr_mask[line]) {
+ if (mctrl & TIOCM_DTR)
+ WRITE_SC(port, OPR_SET, up->dtr_mask[line]);
+ else
+ WRITE_SC(port, OPR_CLR, up->dtr_mask[line]);
+ }
+ if (up->rts_mask[line]) {
+ if (mctrl & TIOCM_RTS)
+ WRITE_SC(port, OPR_SET, up->rts_mask[line]);
+ else
+ WRITE_SC(port, OPR_CLR, up->rts_mask[line]);
+ }
+}
+
+/* port->lock is held by caller and interrupts are disabled. */
+static unsigned int sc26xx_get_mctrl(struct uart_port *port)
+{
+ struct uart_sc26xx_port *up;
+ int line = port->line;
+ unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
+ u8 ipr;
+
+ port -= line;
+ up = container_of(port, struct uart_sc26xx_port, port[0]);
+ ipr = READ_SC(port, IPR) ^ 0xff;
+
+ if (up->dsr_mask[line]) {
+ mctrl &= ~TIOCM_DSR;
+ mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0;
+ }
+ if (up->cts_mask[line]) {
+ mctrl &= ~TIOCM_CTS;
+ mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0;
+ }
+ if (up->dcd_mask[line]) {
+ mctrl &= ~TIOCM_CAR;
+ mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0;
+ }
+ if (up->ri_mask[line]) {
+ mctrl &= ~TIOCM_RNG;
+ mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0;
+ }
+ return mctrl;
+}
+
+/* port->lock held by caller. */
+static void sc26xx_stop_tx(struct uart_port *port)
+{
+ return;
+}
+
+/* port->lock held by caller. */
+static void sc26xx_start_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ while (!uart_circ_empty(xmit)) {
+ if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
+ sc26xx_enable_irq(port, IMR_TXRDY);
+ break;
+ }
+ WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+}
+
+/* port->lock held by caller. */
+static void sc26xx_stop_rx(struct uart_port *port)
+{
+}
+
+/* port->lock held by caller. */
+static void sc26xx_enable_ms(struct uart_port *port)
+{
+}
+
+/* port->lock is not held. */
+static void sc26xx_break_ctl(struct uart_port *port, int break_state)
+{
+ if (break_state == -1)
+ WRITE_SC_PORT(port, CR, CR_STRT_BRK);
+ else
+ WRITE_SC_PORT(port, CR, CR_STOP_BRK);
+}
+
+/* port->lock is not held. */
+static int sc26xx_startup(struct uart_port *port)
+{
+ sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
+ WRITE_SC(port, OPCR, 0);
+
+ /* reset tx and rx */
+ WRITE_SC_PORT(port, CR, CR_RES_RX);
+ WRITE_SC_PORT(port, CR, CR_RES_TX);
+
+ /* start rx/tx */
+ WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
+
+ /* enable irqs */
+ sc26xx_enable_irq(port, IMR_RXRDY);
+ return 0;
+}
+
+/* port->lock is not held. */
+static void sc26xx_shutdown(struct uart_port *port)
+{
+ /* disable interrupst */
+ sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
+
+ /* stop tx/rx */
+ WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
+}
+
+/* port->lock is not held. */
+static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+ unsigned int quot = uart_get_divisor(port, baud);
+ unsigned int iflag, cflag;
+ unsigned long flags;
+ u8 mr1, mr2, csr;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
+ udelay(2);
+
+ WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
+
+ iflag = termios->c_iflag;
+ cflag = termios->c_cflag;
+
+ port->read_status_mask = SR_OVERRUN;
+ if (iflag & INPCK)
+ port->read_status_mask |= SR_PARITY | SR_FRAME;
+ if (iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= SR_BREAK;
+
+ port->ignore_status_mask = 0;
+ if (iflag & IGNBRK)
+ port->ignore_status_mask |= SR_BREAK;
+ if ((cflag & CREAD) == 0)
+ port->ignore_status_mask |= SR_BREAK | SR_FRAME |
+ SR_PARITY | SR_OVERRUN;
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ mr1 = 0x00;
+ break;
+ case CS6:
+ mr1 = 0x01;
+ break;
+ case CS7:
+ mr1 = 0x02;
+ break;
+ default:
+ case CS8:
+ mr1 = 0x03;
+ break;
+ }
+ mr2 = 0x07;
+ if (cflag & CSTOPB)
+ mr2 = 0x0f;
+ if (cflag & PARENB) {
+ if (cflag & PARODD)
+ mr1 |= (1 << 2);
+ } else
+ mr1 |= (2 << 3);
+
+ switch (baud) {
+ case 50:
+ csr = 0x00;
+ break;
+ case 110:
+ csr = 0x11;
+ break;
+ case 134:
+ csr = 0x22;
+ break;
+ case 200:
+ csr = 0x33;
+ break;
+ case 300:
+ csr = 0x44;
+ break;
+ case 600:
+ csr = 0x55;
+ break;
+ case 1200:
+ csr = 0x66;
+ break;
+ case 2400:
+ csr = 0x88;
+ break;
+ case 4800:
+ csr = 0x99;
+ break;
+ default:
+ case 9600:
+ csr = 0xbb;
+ break;
+ case 19200:
+ csr = 0xcc;
+ break;
+ }
+
+ WRITE_SC_PORT(port, CR, CR_RES_MR);
+ WRITE_SC_PORT(port, MRx, mr1);
+ WRITE_SC_PORT(port, MRx, mr2);
+
+ WRITE_SC(port, ACR, 0x80);
+ WRITE_SC_PORT(port, CSR, csr);
+
+ /* reset tx and rx */
+ WRITE_SC_PORT(port, CR, CR_RES_RX);
+ WRITE_SC_PORT(port, CR, CR_RES_TX);
+
+ WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
+ while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
+ udelay(2);
+
+ /* XXX */
+ uart_update_timeout(port, cflag,
+ (port->uartclk / (16 * quot)));
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *sc26xx_type(struct uart_port *port)
+{
+ return "SC26XX";
+}
+
+static void sc26xx_release_port(struct uart_port *port)
+{
+}
+
+static int sc26xx_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void sc26xx_config_port(struct uart_port *port, int flags)
+{
+}
+
+static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops sc26xx_ops = {
+ .tx_empty = sc26xx_tx_empty,
+ .set_mctrl = sc26xx_set_mctrl,
+ .get_mctrl = sc26xx_get_mctrl,
+ .stop_tx = sc26xx_stop_tx,
+ .start_tx = sc26xx_start_tx,
+ .stop_rx = sc26xx_stop_rx,
+ .enable_ms = sc26xx_enable_ms,
+ .break_ctl = sc26xx_break_ctl,
+ .startup = sc26xx_startup,
+ .shutdown = sc26xx_shutdown,
+ .set_termios = sc26xx_set_termios,
+ .type = sc26xx_type,
+ .release_port = sc26xx_release_port,
+ .request_port = sc26xx_request_port,
+ .config_port = sc26xx_config_port,
+ .verify_port = sc26xx_verify_port,
+};
+
+static struct uart_port *sc26xx_port;
+
+#ifdef CONFIG_SERIAL_SC26XX_CONSOLE
+static void sc26xx_console_putchar(struct uart_port *port, char c)
+{
+ unsigned long flags;
+ int limit = 1000000;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ while (limit-- > 0) {
+ if (READ_SC_PORT(port, SR) & SR_TXRDY) {
+ WRITE_SC_PORT(port, THR, c);
+ break;
+ }
+ udelay(2);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void sc26xx_console_write(struct console *con, const char *s, unsigned n)
+{
+ struct uart_port *port = sc26xx_port;
+ int i;
+
+ for (i = 0; i < n; i++) {
+ if (*s == '\n')
+ sc26xx_console_putchar(port, '\r');
+ sc26xx_console_putchar(port, *s++);
+ }
+}
+
+static int __init sc26xx_console_setup(struct console *con, char *options)
+{
+ struct uart_port *port = sc26xx_port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (port->type != PORT_SC26XX)
+ return -1;
+
+ printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index);
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, con, baud, parity, bits, flow);
+}
+
+static struct uart_driver sc26xx_reg;
+static struct console sc26xx_console = {
+ .name = "ttySC",
+ .write = sc26xx_console_write,
+ .device = uart_console_device,
+ .setup = sc26xx_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sc26xx_reg,
+};
+#define SC26XX_CONSOLE &sc26xx_console
+#else
+#define SC26XX_CONSOLE NULL
+#endif
+
+static struct uart_driver sc26xx_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "SC26xx",
+ .dev_name = "ttySC",
+ .major = SC26XX_MAJOR,
+ .minor = SC26XX_MINOR_START,
+ .nr = SC26XX_NR,
+ .cons = SC26XX_CONSOLE,
+};
+
+static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos)
+{
+ unsigned int bit = (flags >> bitpos) & 15;
+
+ return bit ? (1 << (bit - 1)) : 0;
+}
+
+static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up,
+ int line, unsigned int data)
+{
+ up->dtr_mask[line] = sc26xx_flags2mask(data, 0);
+ up->rts_mask[line] = sc26xx_flags2mask(data, 4);
+ up->dsr_mask[line] = sc26xx_flags2mask(data, 8);
+ up->cts_mask[line] = sc26xx_flags2mask(data, 12);
+ up->dcd_mask[line] = sc26xx_flags2mask(data, 16);
+ up->ri_mask[line] = sc26xx_flags2mask(data, 20);
+}
+
+static int __devinit sc26xx_probe(struct platform_device *dev)
+{
+ struct resource *res;
+ struct uart_sc26xx_port *up;
+ unsigned int *sc26xx_data = dev->dev.platform_data;
+ int err;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ up = kzalloc(sizeof *up, GFP_KERNEL);
+ if (unlikely(!up))
+ return -ENOMEM;
+
+ up->port[0].line = 0;
+ up->port[0].ops = &sc26xx_ops;
+ up->port[0].type = PORT_SC26XX;
+ up->port[0].uartclk = (29491200 / 16); /* arbitrary */
+
+ up->port[0].mapbase = res->start;
+ up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40);
+ up->port[0].iotype = UPIO_MEM;
+ up->port[0].irq = platform_get_irq(dev, 0);
+
+ up->port[0].dev = &dev->dev;
+
+ sc26xx_init_masks(up, 0, sc26xx_data[0]);
+
+ sc26xx_port = &up->port[0];
+
+ up->port[1].line = 1;
+ up->port[1].ops = &sc26xx_ops;
+ up->port[1].type = PORT_SC26XX;
+ up->port[1].uartclk = (29491200 / 16); /* arbitrary */
+
+ up->port[1].mapbase = up->port[0].mapbase;
+ up->port[1].membase = up->port[0].membase;
+ up->port[1].iotype = UPIO_MEM;
+ up->port[1].irq = up->port[0].irq;
+
+ up->port[1].dev = &dev->dev;
+
+ sc26xx_init_masks(up, 1, sc26xx_data[1]);
+
+ err = uart_register_driver(&sc26xx_reg);
+ if (err)
+ goto out_free_port;
+
+ sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor;
+
+ err = uart_add_one_port(&sc26xx_reg, &up->port[0]);
+ if (err)
+ goto out_unregister_driver;
+
+ err = uart_add_one_port(&sc26xx_reg, &up->port[1]);
+ if (err)
+ goto out_remove_port0;
+
+ err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up);
+ if (err)
+ goto out_remove_ports;
+
+ dev_set_drvdata(&dev->dev, up);
+ return 0;
+
+out_remove_ports:
+ uart_remove_one_port(&sc26xx_reg, &up->port[1]);
+out_remove_port0:
+ uart_remove_one_port(&sc26xx_reg, &up->port[0]);
+
+out_unregister_driver:
+ uart_unregister_driver(&sc26xx_reg);
+
+out_free_port:
+ kfree(up);
+ sc26xx_port = NULL;
+ return err;
+}
+
+
+static int __exit sc26xx_driver_remove(struct platform_device *dev)
+{
+ struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev);
+
+ free_irq(up->port[0].irq, up);
+
+ uart_remove_one_port(&sc26xx_reg, &up->port[0]);
+ uart_remove_one_port(&sc26xx_reg, &up->port[1]);
+
+ uart_unregister_driver(&sc26xx_reg);
+
+ kfree(up);
+ sc26xx_port = NULL;
+
+ dev_set_drvdata(&dev->dev, NULL);
+ return 0;
+}
+
+static struct platform_driver sc26xx_driver = {
+ .probe = sc26xx_probe,
+ .remove = __devexit_p(sc26xx_driver_remove),
+ .driver = {
+ .name = "SC26xx",
+ },
+};
+
+static int __init sc26xx_init(void)
+{
+ return platform_driver_register(&sc26xx_driver);
+}
+
+static void __exit sc26xx_exit(void)
+{
+ platform_driver_unregister(&sc26xx_driver);
+}
+
+module_init(sc26xx_init);
+module_exit(sc26xx_exit);
+
+
+MODULE_AUTHOR("Thomas Bogendörfer");
+MODULE_DESCRIPTION("SC681/SC2692 serial driver");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 3bb5d241dd40..276da148c57e 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -371,7 +371,8 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
*/
termios->c_cflag &= ~CBAUD;
if (old) {
- termios->c_cflag |= old->c_cflag & CBAUD;
+ baud = tty_termios_baud_rate(old);
+ tty_termios_encode_baud_rate(termios, baud, baud);
old = NULL;
continue;
}
@@ -380,7 +381,7 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
* As a last resort, if the quotient is zero,
* default to 9600 bps
*/
- termios->c_cflag |= B9600;
+ tty_termios_encode_baud_rate(termios, 9600, 9600);
}
return 0;
@@ -1977,6 +1978,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
if (state->info && state->info->flags & UIF_INITIALIZED) {
const struct uart_ops *ops = port->ops;
+ int tries;
state->info->flags = (state->info->flags & ~UIF_INITIALIZED)
| UIF_SUSPENDED;
@@ -1990,9 +1992,14 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
/*
* Wait for the transmitter to empty.
*/
- while (!ops->tx_empty(port)) {
+ for (tries = 3; !ops->tx_empty(port) && tries; tries--) {
msleep(10);
}
+ if (!tries)
+ printk(KERN_ERR "%s%s%s%d: Unable to drain transmitter\n",
+ port->dev ? port->dev->bus_id : "",
+ port->dev ? ": " : "",
+ drv->dev_name, port->line);
ops->shutdown(port);
}
@@ -2029,8 +2036,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
}
port->suspended = 0;
- uart_change_pm(state, 0);
-
/*
* Re-enable the console device after suspending.
*/
@@ -2049,6 +2054,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
if (state->info && state->info->tty && termios.c_cflag == 0)
termios = *state->info->tty->termios;
+ uart_change_pm(state, 0);
port->ops->set_termios(port, &termios, NULL);
console_start(port->cons);
}
@@ -2057,6 +2063,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
const struct uart_ops *ops = port->ops;
int ret;
+ uart_change_pm(state, 0);
ops->set_mctrl(port, 0);
ret = ops->startup(port);
if (ret == 0) {
@@ -2150,10 +2157,11 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
/*
* Ensure that the modem control lines are de-activated.
+ * keep the DTR setting that is set in uart_set_options()
* We probably don't need a spinlock around this, but
*/
spin_lock_irqsave(&port->lock, flags);
- port->ops->set_mctrl(port, 0);
+ port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR);
spin_unlock_irqrestore(&port->lock, flags);
/*
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index d8b660061c13..164d2a42eb59 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -389,7 +389,7 @@ static void serial_detach(struct pcmcia_device *link)
/*====================================================================*/
static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
- kio_addr_t iobase, int irq)
+ unsigned int iobase, int irq)
{
struct uart_port port;
int line;
@@ -456,7 +456,7 @@ next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
static int simple_config(struct pcmcia_device *link)
{
- static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
static const int size_table[2] = { 8, 16 };
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
@@ -480,7 +480,7 @@ static int simple_config(struct pcmcia_device *link)
/* If the card is already configured, look up the port and irq */
i = pcmcia_get_configuration_info(link, &config);
if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
- kio_addr_t port = 0;
+ unsigned int port = 0;
if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
port = config.BasePort2;
info->slave = 1;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 80943409edb0..bacf68dca01a 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -142,7 +142,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
static irqreturn_t ulite_isr(int irq, void *dev_id)
{
- struct uart_port *port = (struct uart_port *)dev_id;
+ struct uart_port *port = dev_id;
int busy;
do {
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 17:36:25 +0100