diff options
Diffstat (limited to 'drivers/soc/fsl/qe/qe.c')
| -rw-r--r-- | drivers/soc/fsl/qe/qe.c | 719 |
1 files changed, 719 insertions, 0 deletions
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c new file mode 100644 index 000000000000..709fc63809e5 --- /dev/null +++ b/drivers/soc/fsl/qe/qe.c @@ -0,0 +1,719 @@ +/* + * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net) + * + * Description: + * General Purpose functions for the global management of the + * QUICC Engine (QE). + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/crc32.h> +#include <linux/mod_devicetable.h> +#include <linux/of_platform.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> +#include <asm/prom.h> +#include <asm/rheap.h> + +static void qe_snums_init(void); +static int qe_sdma_init(void); + +static DEFINE_SPINLOCK(qe_lock); +DEFINE_SPINLOCK(cmxgcr_lock); +EXPORT_SYMBOL(cmxgcr_lock); + +/* QE snum state */ +enum qe_snum_state { + QE_SNUM_STATE_USED, + QE_SNUM_STATE_FREE +}; + +/* QE snum */ +struct qe_snum { + u8 num; + enum qe_snum_state state; +}; + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +struct qe_immap __iomem *qe_immr; +EXPORT_SYMBOL(qe_immr); + +static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ +static unsigned int qe_num_of_snum; + +static phys_addr_t qebase = -1; + +phys_addr_t get_qe_base(void) +{ + struct device_node *qe; + int size; + const u32 *prop; + + if (qebase != -1) + return qebase; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return qebase; + } + + prop = of_get_property(qe, "reg", &size); + if (prop && size >= sizeof(*prop)) + qebase = of_translate_address(qe, prop); + of_node_put(qe); + + return qebase; +} + +EXPORT_SYMBOL(get_qe_base); + +void qe_reset(void) +{ + if (qe_immr == NULL) + qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); + + qe_snums_init(); + + qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + + /* Reclaim the MURAM memory for our use. */ + qe_muram_init(); + + if (qe_sdma_init()) + panic("sdma init failed!"); +} + +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) +{ + unsigned long flags; + u8 mcn_shift = 0, dev_shift = 0; + u32 ret; + + spin_lock_irqsave(&qe_lock, flags); + if (cmd == QE_RESET) { + out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG)); + } else { + if (cmd == QE_ASSIGN_PAGE) { + /* Here device is the SNUM, not sub-block */ + dev_shift = QE_CR_SNUM_SHIFT; + } else if (cmd == QE_ASSIGN_RISC) { + /* Here device is the SNUM, and mcnProtocol is + * e_QeCmdRiscAssignment value */ + dev_shift = QE_CR_SNUM_SHIFT; + mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT; + } else { + if (device == QE_CR_SUBBLOCK_USB) + mcn_shift = QE_CR_MCN_USB_SHIFT; + else + mcn_shift = QE_CR_MCN_NORMAL_SHIFT; + } + + out_be32(&qe_immr->cp.cecdr, cmd_input); + out_be32(&qe_immr->cp.cecr, + (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32) + mcn_protocol << mcn_shift)); + } + + /* wait for the QE_CR_FLG to clear */ + ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0, + 100, 0); + /* On timeout (e.g. failure), the expression will be false (ret == 0), + otherwise it will be true (ret == 1). */ + spin_unlock_irqrestore(&qe_lock, flags); + + return ret == 1; +} +EXPORT_SYMBOL(qe_issue_cmd); + +/* Set a baud rate generator. This needs lots of work. There are + * 16 BRGs, which can be connected to the QE channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The BRG clock is the QE clock divided by 2. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +static unsigned int brg_clk = 0; + +unsigned int qe_get_brg_clk(void) +{ + struct device_node *qe; + int size; + const u32 *prop; + + if (brg_clk) + return brg_clk; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return brg_clk; + } + + prop = of_get_property(qe, "brg-frequency", &size); + if (prop && size == sizeof(*prop)) + brg_clk = *prop; + + of_node_put(qe); + + return brg_clk; +} +EXPORT_SYMBOL(qe_get_brg_clk); + +/* Program the BRG to the given sampling rate and multiplier + * + * @brg: the BRG, QE_BRG1 - QE_BRG16 + * @rate: the desired sampling rate + * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or + * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01, + * then 'multiplier' should be 8. + */ +int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) +{ + u32 divisor, tempval; + u32 div16 = 0; + + if ((brg < QE_BRG1) || (brg > QE_BRG16)) + return -EINVAL; + + divisor = qe_get_brg_clk() / (rate * multiplier); + + if (divisor > QE_BRGC_DIVISOR_MAX + 1) { + div16 = QE_BRGC_DIV16; + divisor /= 16; + } + + /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says + that the BRG divisor must be even if you're not using divide-by-16 + mode. */ + if (!div16 && (divisor & 1) && (divisor > 3)) + divisor++; + + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | + QE_BRGC_ENABLE | div16; + + out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval); + + return 0; +} +EXPORT_SYMBOL(qe_setbrg); + +/* Convert a string to a QE clock source enum + * + * This function takes a string, typically from a property in the device + * tree, and returns the corresponding "enum qe_clock" value. +*/ +enum qe_clock qe_clock_source(const char *source) +{ + unsigned int i; + + if (strcasecmp(source, "none") == 0) + return QE_CLK_NONE; + + if (strncasecmp(source, "brg", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 16)) + return (QE_BRG1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + if (strncasecmp(source, "clk", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 24)) + return (QE_CLK1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + return QE_CLK_DUMMY; +} +EXPORT_SYMBOL(qe_clock_source); + +/* Initialize SNUMs (thread serial numbers) according to + * QE Module Control chapter, SNUM table + */ +static void qe_snums_init(void) +{ + int i; + static const u8 snum_init_76[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D, + 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D, + 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D, + 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD, + 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD, + 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED, + 0xF4, 0xF5, 0xFC, 0xFD, + }; + static const u8 snum_init_46[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19, + 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59, + 0x68, 0x69, 0x78, 0x79, 0x80, 0x81, + }; + static const u8 *snum_init; + + qe_num_of_snum = qe_get_num_of_snums(); + + if (qe_num_of_snum == 76) + snum_init = snum_init_76; + else + snum_init = snum_init_46; + + for (i = 0; i < qe_num_of_snum; i++) { + snums[i].num = snum_init[i]; + snums[i].state = QE_SNUM_STATE_FREE; + } +} + +int qe_get_snum(void) +{ + unsigned long flags; + int snum = -EBUSY; + int i; + + spin_lock_irqsave(&qe_lock, flags); + for (i = 0; i < qe_num_of_snum; i++) { + if (snums[i].state == QE_SNUM_STATE_FREE) { + snums[i].state = QE_SNUM_STATE_USED; + snum = snums[i].num; + break; + } + } + spin_unlock_irqrestore(&qe_lock, flags); + + return snum; +} +EXPORT_SYMBOL(qe_get_snum); + +void qe_put_snum(u8 snum) +{ + int i; + + for (i = 0; i < qe_num_of_snum; i++) { + if (snums[i].num == snum) { + snums[i].state = QE_SNUM_STATE_FREE; + break; + } + } +} +EXPORT_SYMBOL(qe_put_snum); + +static int qe_sdma_init(void) +{ + struct sdma __iomem *sdma = &qe_immr->sdma; + static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM; + + if (!sdma) + return -ENODEV; + + /* allocate 2 internal temporary buffers (512 bytes size each) for + * the SDMA */ + if (IS_ERR_VALUE(sdma_buf_offset)) { + sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); + if (IS_ERR_VALUE(sdma_buf_offset)) + return -ENOMEM; + } + + out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK); + out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | + (0x1 << QE_SDMR_CEN_SHIFT))); + + return 0; +} + +/* The maximum number of RISCs we support */ +#define MAX_QE_RISC 4 + +/* Firmware information stored here for qe_get_firmware_info() */ +static struct qe_firmware_info qe_firmware_info; + +/* + * Set to 1 if QE firmware has been uploaded, and therefore + * qe_firmware_info contains valid data. + */ +static int qe_firmware_uploaded; + +/* + * Upload a QE microcode + * + * This function is a worker function for qe_upload_firmware(). It does + * the actual uploading of the microcode. + */ +static void qe_upload_microcode(const void *base, + const struct qe_microcode *ucode) +{ + const __be32 *code = base + be32_to_cpu(ucode->code_offset); + unsigned int i; + + if (ucode->major || ucode->minor || ucode->revision) + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s' version %u.%u.%u\n", + ucode->id, ucode->major, ucode->minor, ucode->revision); + else + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s'\n", ucode->id); + + /* Use auto-increment */ + out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) | + QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR); + + for (i = 0; i < be32_to_cpu(ucode->count); i++) + out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i])); + + /* Set I-RAM Ready Register */ + out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY)); +} + +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See Documentation/powerpc/qe_firmware.txt for information on QE microcode + * uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; + + if (!firmware) { + printk(KERN_ERR "qe-firmware: invalid pointer\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printk(KERN_ERR "qe-firmware: not a microcode\n"); + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printk(KERN_ERR "qe-firmware: unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { + printk(KERN_ERR "qe-firmware: invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(__be32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(__be32)) { + printk(KERN_ERR "qe-firmware: invalid length\n"); + return -EPERM; + } + + /* Validate the CRC */ + crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size)); + if (crc != crc32(0, firmware, calc_size)) { + printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) + setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR); + + if (firmware->soc.model) + printk(KERN_INFO + "qe-firmware: firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printk(KERN_INFO "qe-firmware: firmware '%s'\n", + firmware->id); + + /* + * The QE only supports one microcode per RISC, so clear out all the + * saved microcode information and put in the new. + */ + memset(&qe_firmware_info, 0, sizeof(qe_firmware_info)); + strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id)); + qe_firmware_info.extended_modes = firmware->extended_modes; + memcpy(qe_firmware_info.vtraps, firmware->vtraps, + sizeof(firmware->vtraps)); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + qe_firmware_uploaded = 1; + + return 0; +} +EXPORT_SYMBOL(qe_upload_firmware); + +/* + * Get info on the currently-loaded firmware + * + * This function also checks the device tree to see if the boot loader has + * uploaded a firmware already. + */ +struct qe_firmware_info *qe_get_firmware_info(void) +{ + static int initialized; + struct property *prop; + struct device_node *qe; + struct device_node *fw = NULL; + const char *sprop; + unsigned int i; + + /* + * If we haven't checked yet, and a driver hasn't uploaded a firmware + * yet, then check the device tree for information. + */ + if (qe_firmware_uploaded) + return &qe_firmware_info; + + if (initialized) + return NULL; + + initialized = 1; + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return NULL; + } + + /* Find the 'firmware' child node */ + for_each_child_of_node(qe, fw) { + if (strcmp(fw->name, "firmware") == 0) + break; + } + + of_node_put(qe); + + /* Did we find the 'firmware' node? */ + if (!fw) + return NULL; + + qe_firmware_uploaded = 1; + + /* Copy the data into qe_firmware_info*/ + sprop = of_get_property(fw, "id", NULL); + if (sprop) + strlcpy(qe_firmware_info.id, sprop, + sizeof(qe_firmware_info.id)); + + prop = of_find_property(fw, "extended-modes", NULL); + if (prop && (prop->length == sizeof(u64))) { + const u64 *iprop = prop->value; + + qe_firmware_info.extended_modes = *iprop; + } + + prop = of_find_property(fw, "virtual-traps", NULL); + if (prop && (prop->length == 32)) { + const u32 *iprop = prop->value; + + for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++) + qe_firmware_info.vtraps[i] = iprop[i]; + } + + of_node_put(fw); + + return &qe_firmware_info; +} +EXPORT_SYMBOL(qe_get_firmware_info); + +unsigned int qe_get_num_of_risc(void) +{ + struct device_node *qe; + int size; + unsigned int num_of_risc = 0; + const u32 *prop; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + /* Older devices trees did not have an "fsl,qe" + * compatible property, so we need to look for + * the QE node by name. + */ + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return num_of_risc; + } + + prop = of_get_property(qe, "fsl,qe-num-riscs", &size); + if (prop && size == sizeof(*prop)) + num_of_risc = *prop; + + of_node_put(qe); + + return num_of_risc; +} +EXPORT_SYMBOL(qe_get_num_of_risc); + +unsigned int qe_get_num_of_snums(void) +{ + struct device_node *qe; + int size; + unsigned int num_of_snums; + const u32 *prop; + + num_of_snums = 28; /* The default number of snum for threads is 28 */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + /* Older devices trees did not have an "fsl,qe" + * compatible property, so we need to look for + * the QE node by name. + */ + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return num_of_snums; + } + + prop = of_get_property(qe, "fsl,qe-num-snums", &size); + if (prop && size == sizeof(*prop)) { + num_of_snums = *prop; + if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) { + /* No QE ever has fewer than 28 SNUMs */ + pr_err("QE: number of snum is invalid\n"); + of_node_put(qe); + return -EINVAL; + } + } + + of_node_put(qe); + + return num_of_snums; +} +EXPORT_SYMBOL(qe_get_num_of_snums); + +static int __init qe_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) + return -ENODEV; + qe_reset(); + of_node_put(np); + return 0; +} +subsys_initcall(qe_init); + +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) +static int qe_resume(struct platform_device *ofdev) +{ + if (!qe_alive_during_sleep()) + qe_reset(); + return 0; +} + +static int qe_probe(struct platform_device *ofdev) +{ + return 0; +} + +static const struct of_device_id qe_ids[] = { + { .compatible = "fsl,qe", }, + { }, +}; + +static struct platform_driver qe_driver = { + .driver = { + .name = "fsl-qe", + .of_match_table = qe_ids, + }, + .probe = qe_probe, + .resume = qe_resume, +}; + +static int __init qe_drv_init(void) +{ + return platform_driver_register(&qe_driver); +} +device_initcall(qe_drv_init); +#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */ |