diff options
Diffstat (limited to 'drivers/spi/spi-geni-qcom.c')
| -rw-r--r-- | drivers/spi/spi-geni-qcom.c | 45 |
1 files changed, 42 insertions, 3 deletions
diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index c7d2c7e45b3f..7d022ccb1b6c 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -151,16 +151,18 @@ static void spi_geni_set_cs(struct spi_device *slv, bool set_flag) struct geni_se *se = &mas->se; unsigned long time_left; - reinit_completion(&mas->xfer_done); pm_runtime_get_sync(mas->dev); if (!(slv->mode & SPI_CS_HIGH)) set_flag = !set_flag; + spin_lock_irq(&mas->lock); + reinit_completion(&mas->xfer_done); mas->cur_mcmd = CMD_CS; if (set_flag) geni_se_setup_m_cmd(se, SPI_CS_ASSERT, 0); else geni_se_setup_m_cmd(se, SPI_CS_DEASSERT, 0); + spin_unlock_irq(&mas->lock); time_left = wait_for_completion_timeout(&mas->xfer_done, HZ); if (!time_left) @@ -307,6 +309,21 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, u32 spi_tx_cfg, len; struct geni_se *se = &mas->se; + /* + * Ensure that our interrupt handler isn't still running from some + * prior command before we start messing with the hardware behind + * its back. We don't need to _keep_ the lock here since we're only + * worried about racing with out interrupt handler. The SPI core + * already handles making sure that we're not trying to do two + * transfers at once or setting a chip select and doing a transfer + * concurrently. + * + * NOTE: we actually _can't_ hold the lock here because possibly we + * might call clk_set_rate() which needs to be able to sleep. + */ + spin_lock_irq(&mas->lock); + spin_unlock_irq(&mas->lock); + spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG); if (xfer->bits_per_word != mas->cur_bits_per_word) { spi_setup_word_len(mas, mode, xfer->bits_per_word); @@ -367,6 +384,12 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, } writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG); mas->cur_mcmd = CMD_XFER; + + /* + * Lock around right before we start the transfer since our + * interrupt could come in at any time now. + */ + spin_lock_irq(&mas->lock); geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION); /* @@ -376,6 +399,7 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, */ if (m_cmd & SPI_TX_ONLY) writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG); + spin_unlock_irq(&mas->lock); } static int spi_geni_transfer_one(struct spi_master *spi, @@ -478,11 +502,11 @@ static irqreturn_t geni_spi_isr(int irq, void *data) struct geni_se *se = &mas->se; u32 m_irq; - if (mas->cur_mcmd == CMD_NONE) + m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS); + if (!m_irq) return IRQ_NONE; spin_lock(&mas->lock); - m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS); if ((m_irq & M_RX_FIFO_WATERMARK_EN) || (m_irq & M_RX_FIFO_LAST_EN)) geni_spi_handle_rx(mas); @@ -522,8 +546,23 @@ static irqreturn_t geni_spi_isr(int irq, void *data) complete(&mas->xfer_done); } + /* + * It's safe or a good idea to Ack all of our our interrupts at the + * end of the function. Specifically: + * - M_CMD_DONE_EN / M_RX_FIFO_LAST_EN: Edge triggered interrupts and + * clearing Acks. Clearing at the end relies on nobody else having + * started a new transfer yet or else we could be clearing _their_ + * done bit, but everyone grabs the spinlock before starting a new + * transfer. + * - M_RX_FIFO_WATERMARK_EN / M_TX_FIFO_WATERMARK_EN: These appear + * to be "latched level" interrupts so it's important to clear them + * _after_ you've handled the condition and always safe to do so + * since they'll re-assert if they're still happening. + */ writel(m_irq, se->base + SE_GENI_M_IRQ_CLEAR); + spin_unlock(&mas->lock); + return IRQ_HANDLED; } |