diff options
Diffstat (limited to 'drivers/spi/spi-imx.c')
| -rw-r--r-- | drivers/spi/spi-imx.c | 106 |
1 files changed, 53 insertions, 53 deletions
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index f3edb5652fc6..0fbd378bd1db 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -171,30 +171,30 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, return 7; } -#define SPI_IMX2_3_CTRL 0x08 -#define SPI_IMX2_3_CTRL_ENABLE (1 << 0) -#define SPI_IMX2_3_CTRL_XCH (1 << 2) -#define SPI_IMX2_3_CTRL_MODE_MASK (0xf << 4) -#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8 -#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12 -#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18) -#define SPI_IMX2_3_CTRL_BL_OFFSET 20 - -#define SPI_IMX2_3_CONFIG 0x0c -#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) -#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) -#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) -#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) - -#define SPI_IMX2_3_INT 0x10 -#define SPI_IMX2_3_INT_TEEN (1 << 0) -#define SPI_IMX2_3_INT_RREN (1 << 3) - -#define SPI_IMX2_3_STAT 0x18 -#define SPI_IMX2_3_STAT_RR (1 << 3) +#define MX51_ECSPI_CTRL 0x08 +#define MX51_ECSPI_CTRL_ENABLE (1 << 0) +#define MX51_ECSPI_CTRL_XCH (1 << 2) +#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4) +#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8 +#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12 +#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18) +#define MX51_ECSPI_CTRL_BL_OFFSET 20 + +#define MX51_ECSPI_CONFIG 0x0c +#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) +#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) +#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) +#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) + +#define MX51_ECSPI_INT 0x10 +#define MX51_ECSPI_INT_TEEN (1 << 0) +#define MX51_ECSPI_INT_RREN (1 << 3) + +#define MX51_ECSPI_STAT 0x18 +#define MX51_ECSPI_STAT_RR (1 << 3) /* MX51 eCSPI */ -static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) +static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi) { /* * there are two 4-bit dividers, the pre-divider divides by @@ -222,36 +222,36 @@ static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n", __func__, fin, fspi, post, pre); - return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) | - (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET); + return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) | + (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET); } -static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned val = 0; if (enable & MXC_INT_TE) - val |= SPI_IMX2_3_INT_TEEN; + val |= MX51_ECSPI_INT_TEEN; if (enable & MXC_INT_RR) - val |= SPI_IMX2_3_INT_RREN; + val |= MX51_ECSPI_INT_RREN; - writel(val, spi_imx->base + SPI_IMX2_3_INT); + writel(val, spi_imx->base + MX51_ECSPI_INT); } -static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx) { u32 reg; - reg = readl(spi_imx->base + SPI_IMX2_3_CTRL); - reg |= SPI_IMX2_3_CTRL_XCH; - writel(reg, spi_imx->base + SPI_IMX2_3_CTRL); + reg = readl(spi_imx->base + MX51_ECSPI_CTRL); + reg |= MX51_ECSPI_CTRL_XCH; + writel(reg, spi_imx->base + MX51_ECSPI_CTRL); } -static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { - u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0; + u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0; /* * The hardware seems to have a race condition when changing modes. The @@ -260,42 +260,42 @@ static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, * the same time. * So set master mode for all channels as we do not support slave mode. */ - ctrl |= SPI_IMX2_3_CTRL_MODE_MASK; + ctrl |= MX51_ECSPI_CTRL_MODE_MASK; /* set clock speed */ - ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz); + ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz); /* set chip select to use */ - ctrl |= SPI_IMX2_3_CTRL_CS(config->cs); + ctrl |= MX51_ECSPI_CTRL_CS(config->cs); - ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET; + ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET; - cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs); + cfg |= MX51_ECSPI_CONFIG_SBBCTRL(config->cs); if (config->mode & SPI_CPHA) - cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs); + cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs); if (config->mode & SPI_CPOL) - cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs); + cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs); if (config->mode & SPI_CS_HIGH) - cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs); + cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs); - writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL); - writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG); + writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); + writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); return 0; } -static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx51_ecspi_rx_available(struct spi_imx_data *spi_imx) { - return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR; + return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR; } -static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx) +static void __maybe_unused mx51_ecspi_reset(struct spi_imx_data *spi_imx) { /* drain receive buffer */ - while (spi_imx2_3_rx_available(spi_imx)) + while (mx51_ecspi_rx_available(spi_imx)) readl(spi_imx->base + MXC_CSPIRXDATA); } @@ -582,11 +582,11 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] = { #endif #ifdef CONFIG_SPI_IMX_VER_2_3 [SPI_IMX_VER_2_3] = { - .intctrl = spi_imx2_3_intctrl, - .config = spi_imx2_3_config, - .trigger = spi_imx2_3_trigger, - .rx_available = spi_imx2_3_rx_available, - .reset = spi_imx2_3_reset, + .intctrl = mx51_ecspi_intctrl, + .config = mx51_ecspi_config, + .trigger = mx51_ecspi_trigger, + .rx_available = mx51_ecspi_rx_available, + .reset = mx51_ecspi_reset, .fifosize = 64, }, #endif |