1 files changed, 13 insertions, 8 deletions

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index fa68e9817929..8d8df51c5466 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1052,12 +1052,8 @@ static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
 
 static void spi_imx_push(struct spi_imx_data *spi_imx)
 {
-	unsigned int burst_len, fifo_words;
+	unsigned int burst_len;
 
-	if (spi_imx->dynamic_burst)
-		fifo_words = 4;
-	else
-		fifo_words = spi_imx_bytes_per_word(spi_imx->bits_per_word);
 	/*
 	 * Reload the FIFO when the remaining bytes to be transferred in the
 	 * current burst is 0. This only applies when bits_per_word is a
@@ -1076,7 +1072,7 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
 
 			spi_imx->remainder = burst_len;
 		} else {
-			spi_imx->remainder = fifo_words;
+			spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word);
 		}
 	}
 
@@ -1084,8 +1080,7 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
 		if (!spi_imx->count)
 			break;
 		if (spi_imx->dynamic_burst &&
-		    spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder,
-						     fifo_words))
+		    spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4))
 			break;
 		spi_imx->tx(spi_imx);
 		spi_imx->txfifo++;
@@ -1195,6 +1190,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	 * dynamic_burst in that case.
 	 */
 	if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
+	    !(spi->mode & SPI_CS_WORD) &&
 	    (spi_imx->bits_per_word == 8 ||
 	    spi_imx->bits_per_word == 16 ||
 	    spi_imx->bits_per_word == 32)) {
@@ -1630,6 +1626,15 @@ static int spi_imx_probe(struct platform_device *pdev)
 	    is_imx53_ecspi(spi_imx))
 		spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
 
+	if (is_imx51_ecspi(spi_imx) &&
+	    device_property_read_u32(&pdev->dev, "cs-gpios", NULL))
+		/*
+		 * When using HW-CS implementing SPI_CS_WORD can be done by just
+		 * setting the burst length to the word size. This is
+		 * considerably faster than manually controlling the CS.
+		 */
+		spi_imx->bitbang.master->mode_bits |= SPI_CS_WORD;
+
 	spi_imx->spi_drctl = spi_drctl;
 
 	init_completion(&spi_imx->xfer_done);