1 files changed, 14 insertions, 48 deletions

diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 2e7f38c7a961..f406b30af961 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -332,7 +332,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
 				data->transfer_active = false;
 				wake_up(&data->wait);
 			} else {
-				dev_err(&data->master->dev,
+				dev_vdbg(&data->master->dev,
 					"%s : Transfer is not completed",
 					__func__);
 			}
@@ -464,20 +464,6 @@ static void pch_spi_reset(struct spi_master *master)
 	pch_spi_writereg(master, PCH_SRST, 0x0);
 }
 
-static int pch_spi_setup(struct spi_device *pspi)
-{
-	/* Check baud rate setting */
-	/* if baud rate of chip is greater than
-	   max we can support,return error */
-	if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE)
-		pspi->max_speed_hz = PCH_MAX_BAUDRATE;
-
-	dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__,
-		(pspi->mode) & (SPI_CPOL | SPI_CPHA));
-
-	return 0;
-}
-
 static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
 {
 
@@ -486,23 +472,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
 	int retval;
 	unsigned long flags;
 
-	/* validate spi message and baud rate */
-	if (unlikely(list_empty(&pmsg->transfers) == 1)) {
-		dev_err(&pspi->dev, "%s list empty\n", __func__);
-		retval = -EINVAL;
-		goto err_out;
-	}
-
-	if (unlikely(pspi->max_speed_hz == 0)) {
-		dev_err(&pspi->dev, "%s pch_spi_transfer maxspeed=%d\n",
-			__func__, pspi->max_speed_hz);
-		retval = -EINVAL;
-		goto err_out;
-	}
-
-	dev_dbg(&pspi->dev,
-		"%s Transfer List not empty. Transfer Speed is set.\n", __func__);
-
 	spin_lock_irqsave(&data->lock, flags);
 	/* validate Tx/Rx buffers and Transfer length */
 	list_for_each_entry(transfer, &pmsg->transfers, transfer_list) {
@@ -523,10 +492,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
 		dev_dbg(&pspi->dev,
 			"%s Tx/Rx buffer valid. Transfer length valid\n",
 			__func__);
-
-		/* if baud rate has been specified validate the same */
-		if (transfer->speed_hz > PCH_MAX_BAUDRATE)
-			transfer->speed_hz = PCH_MAX_BAUDRATE;
 	}
 	spin_unlock_irqrestore(&data->lock, flags);
 
@@ -915,7 +880,7 @@ static void pch_spi_request_dma(struct pch_spi_data *data, int bpw)
 	/* Set Tx DMA */
 	param = &dma->param_tx;
 	param->dma_dev = &dma_dev->dev;
-	param->chan_id = data->master->bus_num * 2; /* Tx = 0, 2 */
+	param->chan_id = data->ch * 2; /* Tx = 0, 2 */;
 	param->tx_reg = data->io_base_addr + PCH_SPDWR;
 	param->width = width;
 	chan = dma_request_channel(mask, pch_spi_filter, param);
@@ -930,7 +895,7 @@ static void pch_spi_request_dma(struct pch_spi_data *data, int bpw)
 	/* Set Rx DMA */
 	param = &dma->param_rx;
 	param->dma_dev = &dma_dev->dev;
-	param->chan_id = data->master->bus_num * 2 + 1; /* Rx = Tx + 1 */
+	param->chan_id = data->ch * 2 + 1; /* Rx = Tx + 1 */;
 	param->rx_reg = data->io_base_addr + PCH_SPDRR;
 	param->width = width;
 	chan = dma_request_channel(mask, pch_spi_filter, param);
@@ -1151,8 +1116,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 	dma->nent = num;
 	dma->desc_tx = desc_tx;
 
-	dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing "
-		"0x2 to SSNXCR\n", __func__);
+	dev_dbg(&data->master->dev, "%s:Pulling down SSN low - writing 0x2 to SSNXCR\n", __func__);
 
 	spin_lock_irqsave(&data->lock, flags);
 	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
@@ -1418,10 +1382,10 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
 
 	/* initialize members of SPI master */
 	master->num_chipselect = PCH_MAX_CS;
-	master->setup = pch_spi_setup;
 	master->transfer = pch_spi_transfer;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
 	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+	master->max_speed_hz = PCH_MAX_BAUDRATE;
 
 	data->board_dat = board_dat;
 	data->plat_dev = plat_dev;
@@ -1452,6 +1416,11 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
 
 	pch_spi_set_master_mode(master);
 
+	if (use_dma) {
+		dev_info(&plat_dev->dev, "Use DMA for data transfers\n");
+		pch_alloc_dma_buf(board_dat, data);
+	}
+
 	ret = spi_register_master(master);
 	if (ret != 0) {
 		dev_err(&plat_dev->dev,
@@ -1459,14 +1428,10 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
 		goto err_spi_register_master;
 	}
 
-	if (use_dma) {
-		dev_info(&plat_dev->dev, "Use DMA for data transfers\n");
-		pch_alloc_dma_buf(board_dat, data);
-	}
-
 	return 0;
 
 err_spi_register_master:
+	pch_free_dma_buf(board_dat, data);
 	free_irq(board_dat->pdev->irq, data);
 err_request_irq:
 	pch_spi_free_resources(board_dat, data);
@@ -1604,8 +1569,7 @@ static struct platform_driver pch_spi_pd_driver = {
 	.resume = pch_spi_pd_resume
 };
 
-static int pch_spi_probe(struct pci_dev *pdev,
-				   const struct pci_device_id *id)
+static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct pch_spi_board_data *board_dat;
 	struct platform_device *pd_dev = NULL;
@@ -1675,6 +1639,8 @@ static int pch_spi_probe(struct pci_dev *pdev,
 	return 0;
 
 err_platform_device:
+	while (--i >= 0)
+		platform_device_unregister(pd_dev_save->pd_save[i]);
 	pci_disable_device(pdev);
 pci_enable_device:
 	pci_release_regions(pdev);