diff options
Diffstat (limited to 'drivers/spi')
29 files changed, 1127 insertions, 1011 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index eb1f1ef5fa2e..94964af1428d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -118,6 +118,13 @@ config SPI_BCM63XX help Enable support for the SPI controller on the Broadcom BCM63xx SoCs. +config SPI_BCM63XX_HSSPI + tristate "Broadcom BCM63XX HS SPI controller driver" + depends on BCM63XX || COMPILE_TEST + help + This enables support for the High Speed SPI controller present on + newer Broadcom BCM63XX SoCs. + config SPI_BITBANG tristate "Utilities for Bitbanging SPI masters" help @@ -159,7 +166,6 @@ config SPI_DAVINCI tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" depends on ARCH_DAVINCI || ARCH_KEYSTONE select SPI_BITBANG - select TI_EDMA help SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. @@ -370,7 +376,7 @@ config SPI_PXA2XX_PCI config SPI_RSPI tristate "Renesas RSPI controller" - depends on (SUPERH || ARCH_SHMOBILE) && SH_DMAE_BASE + depends on (SUPERH && SH_DMAE_BASE) || ARCH_SHMOBILE help SPI driver for Renesas RSPI blocks. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index ab8d8644af0e..95af48d2d360 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o +obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o obj-$(CONFIG_SPI_BFIN_V3) += spi-bfin-v3.o obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c index 595b62cb545d..5d7deaf62867 100644 --- a/drivers/spi/spi-altera.c +++ b/drivers/spi/spi-altera.c @@ -220,8 +220,6 @@ static int altera_spi_probe(struct platform_device *pdev) /* setup the state for the bitbang driver */ hw->bitbang.master = master; - if (!hw->bitbang.master) - return err; hw->bitbang.chipselect = altera_spi_chipsel; hw->bitbang.txrx_bufs = altera_spi_txrx; diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index 821bf7ac218d..31534b51715a 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -243,21 +243,21 @@ static int ath79_spi_probe(struct platform_device *pdev) goto err_put_master; } - sp->base = ioremap(r->start, resource_size(r)); + sp->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (!sp->base) { ret = -ENXIO; goto err_put_master; } - sp->clk = clk_get(&pdev->dev, "ahb"); + sp->clk = devm_clk_get(&pdev->dev, "ahb"); if (IS_ERR(sp->clk)) { ret = PTR_ERR(sp->clk); - goto err_unmap; + goto err_put_master; } ret = clk_enable(sp->clk); if (ret) - goto err_clk_put; + goto err_put_master; rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ); if (!rate) { @@ -280,10 +280,6 @@ err_disable: ath79_spi_disable(sp); err_clk_disable: clk_disable(sp->clk); -err_clk_put: - clk_put(sp->clk); -err_unmap: - iounmap(sp->base); err_put_master: spi_master_put(sp->bitbang.master); @@ -297,8 +293,6 @@ static int ath79_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&sp->bitbang); ath79_spi_disable(sp); clk_disable(sp->clk); - clk_put(sp->clk); - iounmap(sp->base); spi_master_put(sp->bitbang.master); return 0; diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 273db0beb2b8..b0842f751016 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -189,6 +189,8 @@ */ #define DMA_MIN_BYTES 16 +#define SPI_DMA_TIMEOUT (msecs_to_jiffies(1000)) + struct atmel_spi_dma { struct dma_chan *chan_rx; struct dma_chan *chan_tx; @@ -220,17 +222,13 @@ struct atmel_spi { int irq; struct clk *clk; struct platform_device *pdev; - struct spi_device *stay; - u8 stopping; - struct list_head queue; - struct tasklet_struct tasklet; struct spi_transfer *current_transfer; unsigned long current_remaining_bytes; - struct spi_transfer *next_transfer; - unsigned long next_remaining_bytes; int done_status; + struct completion xfer_completion; + /* scratch buffer */ void *buffer; dma_addr_t buffer_dma; @@ -241,6 +239,9 @@ struct atmel_spi { bool use_pdc; /* dmaengine data */ struct atmel_spi_dma dma; + + bool keep_cs; + bool cs_active; }; /* Controller-specific per-slave state */ @@ -376,17 +377,6 @@ static inline bool atmel_spi_use_dma(struct atmel_spi *as, return as->use_dma && xfer->len >= DMA_MIN_BYTES; } -static inline int atmel_spi_xfer_is_last(struct spi_message *msg, - struct spi_transfer *xfer) -{ - return msg->transfers.prev == &xfer->transfer_list; -} - -static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer) -{ - return xfer->delay_usecs == 0 && !xfer->cs_change; -} - static int atmel_spi_dma_slave_config(struct atmel_spi *as, struct dma_slave_config *slave_config, u8 bits_per_word) @@ -513,23 +503,20 @@ static void dma_callback(void *data) struct spi_master *master = data; struct atmel_spi *as = spi_master_get_devdata(master); - /* trigger SPI tasklet */ - tasklet_schedule(&as->tasklet); + complete(&as->xfer_completion); } /* * Next transfer using PIO. - * lock is held, spi tasklet is blocked */ static void atmel_spi_next_xfer_pio(struct spi_master *master, struct spi_transfer *xfer) { struct atmel_spi *as = spi_master_get_devdata(master); + unsigned long xfer_pos = xfer->len - as->current_remaining_bytes; dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_pio\n"); - as->current_remaining_bytes = xfer->len; - /* Make sure data is not remaining in RDR */ spi_readl(as, RDR); while (spi_readl(as, SR) & SPI_BIT(RDRF)) { @@ -537,13 +524,14 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master, cpu_relax(); } - if (xfer->tx_buf) + if (xfer->tx_buf) { if (xfer->bits_per_word > 8) - spi_writel(as, TDR, *(u16 *)(xfer->tx_buf)); + spi_writel(as, TDR, *(u16 *)(xfer->tx_buf + xfer_pos)); else - spi_writel(as, TDR, *(u8 *)(xfer->tx_buf)); - else + spi_writel(as, TDR, *(u8 *)(xfer->tx_buf + xfer_pos)); + } else { spi_writel(as, TDR, 0); + } dev_dbg(master->dev.parent, " start pio xfer %p: len %u tx %p rx %p bitpw %d\n", @@ -556,7 +544,6 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master, /* * Submit next transfer for DMA. - * lock is held, spi tasklet is blocked */ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master, struct spi_transfer *xfer, @@ -694,74 +681,90 @@ static void atmel_spi_next_xfer_data(struct spi_master *master, *plen = len; } +static int atmel_spi_set_xfer_speed(struct atmel_spi *as, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + u32 scbr, csr; + unsigned long bus_hz; + + /* v1 chips start out at half the peripheral bus speed. */ + bus_hz = clk_get_rate(as->clk); + if (!atmel_spi_is_v2(as)) + bus_hz /= 2; + + /* + * Calculate the lowest divider that satisfies the + * constraint, assuming div32/fdiv/mbz == 0. + */ + if (xfer->speed_hz) + scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz); + else + /* + * This can happend if max_speed is null. + * In this case, we set the lowest possible speed + */ + scbr = 0xff; + + /* + * If the resulting divider doesn't fit into the + * register bitfield, we can't satisfy the constraint. + */ + if (scbr >= (1 << SPI_SCBR_SIZE)) { + dev_err(&spi->dev, + "setup: %d Hz too slow, scbr %u; min %ld Hz\n", + xfer->speed_hz, scbr, bus_hz/255); + return -EINVAL; + } + if (scbr == 0) { + dev_err(&spi->dev, + "setup: %d Hz too high, scbr %u; max %ld Hz\n", + xfer->speed_hz, scbr, bus_hz); + return -EINVAL; + } + csr = spi_readl(as, CSR0 + 4 * spi->chip_select); + csr = SPI_BFINS(SCBR, scbr, csr); + spi_writel(as, CSR0 + 4 * spi->chip_select, csr); + + return 0; +} + /* * Submit next transfer for PDC. * lock is held, spi irq is blocked */ static void atmel_spi_pdc_next_xfer(struct spi_master *master, - struct spi_message *msg) + struct spi_message *msg, + struct spi_transfer *xfer) { struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_transfer *xfer; - u32 len, remaining; - u32 ieval; + u32 len; dma_addr_t tx_dma, rx_dma; - if (!as->current_transfer) - xfer = list_entry(msg->transfers.next, - struct spi_transfer, transfer_list); - else if (!as->next_transfer) - xfer = list_entry(as->current_transfer->transfer_list.next, - struct spi_transfer, transfer_list); - else - xfer = NULL; - - if (xfer) { - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - - len = xfer->len; - atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); - remaining = xfer->len - len; - - spi_writel(as, RPR, rx_dma); - spi_writel(as, TPR, tx_dma); - - if (msg->spi->bits_per_word > 8) - len >>= 1; - spi_writel(as, RCR, len); - spi_writel(as, TCR, len); - - dev_dbg(&msg->spi->dev, - " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n", - xfer, xfer->len, xfer->tx_buf, - (unsigned long long)xfer->tx_dma, xfer->rx_buf, - (unsigned long long)xfer->rx_dma); - } else { - xfer = as->next_transfer; - remaining = as->next_remaining_bytes; - } + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - as->current_transfer = xfer; - as->current_remaining_bytes = remaining; + len = as->current_remaining_bytes; + atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); + as->current_remaining_bytes -= len; - if (remaining > 0) - len = remaining; - else if (!atmel_spi_xfer_is_last(msg, xfer) - && atmel_spi_xfer_can_be_chained(xfer)) { - xfer = list_entry(xfer->transfer_list.next, - struct spi_transfer, transfer_list); - len = xfer->len; - } else - xfer = NULL; + spi_writel(as, RPR, rx_dma); + spi_writel(as, TPR, tx_dma); - as->next_transfer = xfer; + if (msg->spi->bits_per_word > 8) + len >>= 1; + spi_writel(as, RCR, len); + spi_writel(as, TCR, len); - if (xfer) { - u32 total; + dev_dbg(&msg->spi->dev, + " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n", + xfer, xfer->len, xfer->tx_buf, + (unsigned long long)xfer->tx_dma, xfer->rx_buf, + (unsigned long long)xfer->rx_dma); - total = len; + if (as->current_remaining_bytes) { + len = as->current_remaining_bytes; atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); - as->next_remaining_bytes = total - len; + as->current_remaining_bytes -= len; spi_writel(as, RNPR, rx_dma); spi_writel(as, TNPR, tx_dma); @@ -776,11 +779,6 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master, xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma, xfer->rx_buf, (unsigned long long)xfer->rx_dma); - ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES); - } else { - spi_writel(as, RNCR, 0); - spi_writel(as, TNCR, 0); - ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES); } /* REVISIT: We're waiting for ENDRX before we start the next @@ -793,83 +791,11 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master, * * It should be doable, though. Just not now... */ - spi_writel(as, IER, ieval); + spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES)); spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } /* - * Choose way to submit next transfer and start it. - * lock is held, spi tasklet is blocked - */ -static void atmel_spi_dma_next_xfer(struct spi_master *master, - struct spi_message *msg) -{ - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_transfer *xfer; - u32 remaining, len; - - remaining = as->current_remaining_bytes; - if (remaining) { - xfer = as->current_transfer; - len = remaining; - } else { - if (!as->current_transfer) - xfer = list_entry(msg->transfers.next, - struct spi_transfer, transfer_list); - else - xfer = list_entry( - as->current_transfer->transfer_list.next, - struct spi_transfer, transfer_list); - - as->current_transfer = xfer; - len = xfer->len; - } - - if (atmel_spi_use_dma(as, xfer)) { - u32 total = len; - if (!atmel_spi_next_xfer_dma_submit(master, xfer, &len)) { - as->current_remaining_bytes = total - len; - return; - } else { - dev_err(&msg->spi->dev, "unable to use DMA, fallback to PIO\n"); - } - } - - /* use PIO if error appened using DMA */ - atmel_spi_next_xfer_pio(master, xfer); -} - -static void atmel_spi_next_message(struct spi_master *master) -{ - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_device *spi; - - BUG_ON(as->current_transfer); - - msg = list_entry(as->queue.next, struct spi_message, queue); - spi = msg->spi; - - dev_dbg(master->dev.parent, "start message %p for %s\n", - msg, dev_name(&spi->dev)); - - /* select chip if it's not still active */ - if (as->stay) { - if (as->stay != spi) { - cs_deactivate(as, as->stay); - cs_activate(as, spi); - } - as->stay = NULL; - } else - cs_activate(as, spi); - - if (as->use_pdc) - atmel_spi_pdc_next_xfer(master, msg); - else - atmel_spi_dma_next_xfer(master, msg); -} - -/* * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma: * - The buffer is either valid for CPU access, else NULL * - If the buffer is valid, so is its DMA address @@ -924,41 +850,7 @@ static void atmel_spi_disable_pdc_transfer(struct atmel_spi *as) spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); } -static void -atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, - struct spi_message *msg, int stay) -{ - if (!stay || as->done_status < 0) - cs_deactivate(as, msg->spi); - else - as->stay = msg->spi; - - list_del(&msg->queue); - msg->status = as->done_status; - - dev_dbg(master->dev.parent, - "xfer complete: %u bytes transferred\n", - msg->actual_length); - - atmel_spi_unlock(as); - msg->complete(msg->context); - atmel_spi_lock(as); - - as->current_transfer = NULL; - as->next_transfer = NULL; - as->done_status = 0; - - /* continue if needed */ - if (list_empty(&as->queue) || as->stopping) { - if (as->use_pdc) - atmel_spi_disable_pdc_transfer(as); - } else { - atmel_spi_next_message(master); - } -} - /* Called from IRQ - * lock is held * * Must update "current_remaining_bytes" to keep track of data * to transfer. @@ -966,9 +858,7 @@ atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as, static void atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) { - u8 *txp; u8 *rxp; - u16 *txp16; u16 *rxp16; unsigned long xfer_pos = xfer->len - as->current_remaining_bytes; @@ -990,96 +880,12 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) } else { as->current_remaining_bytes--; } - - if (as->current_remaining_bytes) { - if (xfer->tx_buf) { - if (xfer->bits_per_word > 8) { - txp16 = (u16 *)(((u8 *)xfer->tx_buf) - + xfer_pos + 2); - spi_writel(as, TDR, *txp16); - } else { - txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1; - spi_writel(as, TDR, *txp); - } - } else { - spi_writel(as, TDR, 0); - } - } -} - -/* Tasklet - * Called from DMA callback + pio transfer and overrun IRQ. - */ -static void atmel_spi_tasklet_func(unsigned long data) -{ - struct spi_master *master = (struct spi_master *)data; - struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_transfer *xfer; - - dev_vdbg(master->dev.parent, "atmel_spi_tasklet_func\n"); - - atmel_spi_lock(as); - - xfer = as->current_transfer; - - if (xfer == NULL) - /* already been there */ - goto tasklet_out; - - msg = list_entry(as->queue.next, struct spi_message, queue); - - if (as->current_remaining_bytes == 0) { - if (as->done_status < 0) { - /* error happened (overrun) */ - if (atmel_spi_use_dma(as, xfer)) - atmel_spi_stop_dma(as); - } else { - /* only update length if no error */ - msg->actual_length += xfer->len; - } - - if (atmel_spi_use_dma(as, xfer)) - if (!msg->is_dma_mapped) - atmel_spi_dma_unmap_xfer(master, xfer); - - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - if (atmel_spi_xfer_is_last(msg, xfer) || as->done_status < 0) { - /* report completed (or erroneous) message */ - atmel_spi_msg_done(master, as, msg, xfer->cs_change); - } else { - if (xfer->cs_change) { - cs_deactivate(as, msg->spi); - udelay(1); - cs_activate(as, msg->spi); - } - - /* - * Not done yet. Submit the next transfer. - * - * FIXME handle protocol options for xfer - */ - atmel_spi_dma_next_xfer(master, msg); - } - } else { - /* - * Keep going, we still have data to send in - * the current transfer. - */ - atmel_spi_dma_next_xfer(master, msg); - } - -tasklet_out: - atmel_spi_unlock(as); } /* Interrupt * * No need for locking in this Interrupt handler: done_status is the - * only information modified. What we need is the update of this field - * before tasklet runs. This is ensured by using barrier. + * only information modified. */ static irqreturn_t atmel_spi_pio_interrupt(int irq, void *dev_id) @@ -1107,8 +913,6 @@ atmel_spi_pio_interrupt(int irq, void *dev_id) * * We will also not process any remaning transfers in * the message. - * - * All actions are done in tasklet with done_status indication */ as->done_status = -EIO; smp_wmb(); @@ -1116,7 +920,7 @@ atmel_spi_pio_interrupt(int irq, void *dev_id) /* Clear any overrun happening while cleaning up */ spi_readl(as, SR); - tasklet_schedule(&as->tasklet); + complete(&as->xfer_completion); } else if (pending & SPI_BIT(RDRF)) { atmel_spi_lock(as); @@ -1125,11 +929,10 @@ atmel_spi_pio_interrupt(int irq, void *dev_id) ret = IRQ_HANDLED; xfer = as->current_transfer; atmel_spi_pump_pio_data(as, xfer); - if (!as->current_remaining_bytes) { - /* no more data to xfer, kick tasklet */ + if (!as->current_remaining_bytes) spi_writel(as, IDR, pending); - tasklet_schedule(&as->tasklet); - } + + complete(&as->xfer_completion); } atmel_spi_unlock(as); @@ -1147,116 +950,35 @@ atmel_spi_pdc_interrupt(int irq, void *dev_id) { struct spi_master *master = dev_id; struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_transfer *xfer; u32 status, pending, imr; int ret = IRQ_NONE; - atmel_spi_lock(as); - - xfer = as->current_transfer; - msg = list_entry(as->queue.next, struct spi_message, queue); - imr = spi_readl(as, IMR); status = spi_readl(as, SR); pending = status & imr; if (pending & SPI_BIT(OVRES)) { - int timeout; ret = IRQ_HANDLED; spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES))); - /* - * When we get an overrun, we disregard the current - * transfer. Data will not be copied back from any - * bounce buffer and msg->actual_len will not be - * updated with the last xfer. - * - * We will also not process any remaning transfers in - * the message. - * - * First, stop the transfer and unmap the DMA buffers. - */ - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - if (!msg->is_dma_mapped) - atmel_spi_dma_unmap_xfer(master, xfer); - - /* REVISIT: udelay in irq is unfriendly */ - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n", - spi_readl(as, TCR), spi_readl(as, RCR)); - - /* - * Clean up DMA registers and make sure the data - * registers are empty. - */ - spi_writel(as, RNCR, 0); - spi_writel(as, TNCR, 0); - spi_writel(as, RCR, 0); - spi_writel(as, TCR, 0); - for (timeout = 1000; timeout; timeout--) - if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) - break; - if (!timeout) - dev_warn(master->dev.parent, - "timeout waiting for TXEMPTY"); - while (spi_readl(as, SR) & SPI_BIT(RDRF)) - spi_readl(as, RDR); - /* Clear any overrun happening while cleaning up */ spi_readl(as, SR); as->done_status = -EIO; - atmel_spi_msg_done(master, as, msg, 0); + + complete(&as->xfer_completion); + } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) { ret = IRQ_HANDLED; spi_writel(as, IDR, pending); - if (as->current_remaining_bytes == 0) { - msg->actual_length += xfer->len; - - if (!msg->is_dma_mapped) - atmel_spi_dma_unmap_xfer(master, xfer); - - /* REVISIT: udelay in irq is unfriendly */ - if (xfer->delay_usecs) - udelay(xfer->delay_usecs); - - if (atmel_spi_xfer_is_last(msg, xfer)) { - /* report completed message */ - atmel_spi_msg_done(master, as, msg, - xfer->cs_change); - } else { - if (xfer->cs_change) { - cs_deactivate(as, msg->spi); - udelay(1); - cs_activate(as, msg->spi); - } - - /* - * Not done yet. Submit the next transfer. - * - * FIXME handle protocol options for xfer - */ - atmel_spi_pdc_next_xfer(master, msg); - } - } else { - /* - * Keep going, we still have data to send in - * the current transfer. - */ - atmel_spi_pdc_next_xfer(master, msg); - } + complete(&as->xfer_completion); } - atmel_spi_unlock(as); - return ret; } @@ -1264,17 +986,13 @@ static int atmel_spi_setup(struct spi_device *spi) { struct atmel_spi *as; struct atmel_spi_device *asd; - u32 scbr, csr; + u32 csr; unsigned int bits = spi->bits_per_word; - unsigned long bus_hz; unsigned int npcs_pin; int ret; as = spi_master_get_devdata(spi->master); - if (as->stopping) - return -ESHUTDOWN; - if (spi->chip_select > spi->master->num_chipselect) { dev_dbg(&spi->dev, "setup: invalid chipselect %u (%u defined)\n", @@ -1290,33 +1008,7 @@ static int atmel_spi_setup(struct spi_device *spi) return -EINVAL; } - /* v1 chips start out at half the peripheral bus speed. */ - bus_hz = clk_get_rate(as->clk); - if (!atmel_spi_is_v2(as)) - bus_hz /= 2; - - if (spi->max_speed_hz) { - /* - * Calculate the lowest divider that satisfies the - * constraint, assuming div32/fdiv/mbz == 0. - */ - scbr = DIV_ROUND_UP(bus_hz, spi->max_speed_hz); - - /* - * If the resulting divider doesn't fit into the - * register bitfield, we can't satisfy the constraint. - */ - if (scbr >= (1 << SPI_SCBR_SIZE)) { - dev_dbg(&spi->dev, - "setup: %d Hz too slow, scbr %u; min %ld Hz\n", - spi->max_speed_hz, scbr, bus_hz/255); - return -EINVAL; - } - } else - /* speed zero means "as slow as possible" */ - scbr = 0xff; - - csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8); + csr = SPI_BF(BITS, bits - 8); if (spi->mode & SPI_CPOL) csr |= SPI_BIT(CPOL); if (!(spi->mode & SPI_CPHA)) @@ -1352,19 +1044,13 @@ static int atmel_spi_setup(struct spi_device *spi) asd->npcs_pin = npcs_pin; spi->controller_state = asd; gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH)); - } else { - atmel_spi_lock(as); - if (as->stay == spi) - as->stay = NULL; - cs_deactivate(as, spi); - atmel_spi_unlock(as); } asd->csr = csr; dev_dbg(&spi->dev, - "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n", - bus_hz / scbr, bits, spi->mode, spi->chip_select, csr); + "setup: bpw %u mode 0x%x -> csr%d %08x\n", + bits, spi->mode, spi->chip_select, csr); if (!atmel_spi_is_v2(as)) spi_writel(as, CSR0 + 4 * spi->chip_select, csr); @@ -1372,103 +1058,218 @@ static int atmel_spi_setup(struct spi_device *spi) return 0; } -static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) +static int atmel_spi_one_transfer(struct spi_master *master, + struct spi_message *msg, + struct spi_transfer *xfer) { struct atmel_spi *as; - struct spi_transfer *xfer; - struct device *controller = spi->master->dev.parent; + struct spi_device *spi = msg->spi; u8 bits; + u32 len; struct atmel_spi_device *asd; + int timeout; + int ret; - as = spi_master_get_devdata(spi->master); - - dev_dbg(controller, "new message %p submitted for %s\n", - msg, dev_name(&spi->dev)); + as = spi_master_get_devdata(master); - if (unlikely(list_empty(&msg->transfers))) + if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { + dev_dbg(&spi->dev, "missing rx or tx buf\n"); return -EINVAL; + } - if (as->stopping) - return -ESHUTDOWN; + if (xfer->bits_per_word) { + asd = spi->controller_state; + bits = (asd->csr >> 4) & 0xf; + if (bits != xfer->bits_per_word - 8) { + dev_dbg(&spi->dev, + "you can't yet change bits_per_word in transfers\n"); + return -ENOPROTOOPT; + } + } - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { - dev_dbg(&spi->dev, "missing rx or tx buf\n"); + if (xfer->bits_per_word > 8) { + if (xfer->len % 2) { + dev_dbg(&spi->dev, + "buffer len should be 16 bits aligned\n"); return -EINVAL; } + } - if (xfer->bits_per_word) { - asd = spi->controller_state; - bits = (asd->csr >> 4) & 0xf; - if (bits != xfer->bits_per_word - 8) { - dev_dbg(&spi->dev, - "you can't yet change bits_per_word in transfers\n"); - return -ENOPROTOOPT; + /* + * DMA map early, for performance (empties dcache ASAP) and + * better fault reporting. + */ + if ((!msg->is_dma_mapped) + && (atmel_spi_use_dma(as, xfer) || as->use_pdc)) { + if (atmel_spi_dma_map_xfer(as, xfer) < 0) + return -ENOMEM; + } + + atmel_spi_set_xfer_speed(as, msg->spi, xfer); + + as->done_status = 0; + as->current_transfer = xfer; + as->current_remaining_bytes = xfer->len; + while (as->current_remaining_bytes) { + reinit_completion(&as->xfer_completion); + + if (as->use_pdc) { + atmel_spi_pdc_next_xfer(master, msg, xfer); + } else if (atmel_spi_use_dma(as, xfer)) { + len = as->current_remaining_bytes; + ret = atmel_spi_next_xfer_dma_submit(master, + xfer, &len); + if (ret) { + dev_err(&spi->dev, + "unable to use DMA, fallback to PIO\n"); + atmel_spi_next_xfer_pio(master, xfer); + } else { + as->current_remaining_bytes -= len; } + } else { + atmel_spi_next_xfer_pio(master, xfer); } - if (xfer->bits_per_word > 8) { - if (xfer->len % 2) { - dev_dbg(&spi->dev, "buffer len should be 16 bits aligned\n"); - return -EINVAL; - } + ret = wait_for_completion_timeout(&as->xfer_completion, + SPI_DMA_TIMEOUT); + if (WARN_ON(ret == 0)) { + dev_err(&spi->dev, + "spi trasfer timeout, err %d\n", ret); + as->done_status = -EIO; + } else { + ret = 0; } - /* FIXME implement these protocol options!! */ - if (xfer->speed_hz < spi->max_speed_hz) { - dev_dbg(&spi->dev, "can't change speed in transfer\n"); - return -ENOPROTOOPT; + if (as->done_status) + break; + } + + if (as->done_status) { + if (as->use_pdc) { + dev_warn(master->dev.parent, + "overrun (%u/%u remaining)\n", + spi_readl(as, TCR), spi_readl(as, RCR)); + + /* + * Clean up DMA registers and make sure the data + * registers are empty. + */ + spi_writel(as, RNCR, 0); + spi_writel(as, TNCR, 0); + spi_writel(as, RCR, 0); + spi_writel(as, TCR, 0); + for (timeout = 1000; timeout; timeout--) + if (spi_readl(as, SR) & SPI_BIT(TXEMPTY)) + break; + if (!timeout) + dev_warn(master->dev.parent, + "timeout waiting for TXEMPTY"); + while (spi_readl(as, SR) & SPI_BIT(RDRF)) + spi_readl(as, RDR); + + /* Clear any overrun happening while cleaning up */ + spi_readl(as, SR); + + } else if (atmel_spi_use_dma(as, xfer)) { + atmel_spi_stop_dma(as); } - /* - * DMA map early, for performance (empties dcache ASAP) and - * better fault reporting. - */ - if ((!msg->is_dma_mapped) && (atmel_spi_use_dma(as, xfer) - || as->use_pdc)) { - if (atmel_spi_dma_map_xfer(as, xfer) < 0) - return -ENOMEM; + if (!msg->is_dma_mapped + && (atmel_spi_use_dma(as, xfer) || as->use_pdc)) + atmel_spi_dma_unmap_xfer(master, xfer); + + return 0; + + } else { + /* only update length if no error */ + msg->actual_length += xfer->len; + } + + if (!msg->is_dma_mapped + && (atmel_spi_use_dma(as, xfer) || as->use_pdc)) + atmel_spi_dma_unmap_xfer(master, xfer); + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (xfer->cs_change) { + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) { + as->keep_cs = true; + } else { + as->cs_active = !as->cs_active; + if (as->cs_active) + cs_activate(as, msg->spi); + else + cs_deactivate(as, msg->spi); } } -#ifdef VERBOSE + return 0; +} + +static int atmel_spi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) +{ + struct atmel_spi *as; + struct spi_transfer *xfer; + struct spi_device *spi = msg->spi; + int ret = 0; + + as = spi_master_get_devdata(master); + + dev_dbg(&spi->dev, "new message %p submitted for %s\n", + msg, dev_name(&spi->dev)); + + if (unlikely(list_empty(&msg->transfers))) + return -EINVAL; + + atmel_spi_lock(as); + cs_activate(as, spi); + + as->cs_active = true; + as->keep_cs = false; + + msg->status = 0; + msg->actual_length = 0; + list_for_each_entry(xfer, &msg->transfers, transfer_list) { - dev_dbg(controller, + ret = atmel_spi_one_transfer(master, msg, xfer); + if (ret) + goto msg_done; + } + + if (as->use_pdc) + atmel_spi_disable_pdc_transfer(as); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + dev_dbg(&spi->dev, " xfer %p: len %u tx %p/%08x rx %p/%08x\n", xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, xfer->rx_buf, xfer->rx_dma); } -#endif - msg->status = -EINPROGRESS; - msg->actual_length = 0; +msg_done: + if (!as->keep_cs) + cs_deactivate(as, msg->spi); - atmel_spi_lock(as); - list_add_tail(&msg->queue, &as->queue); - if (!as->current_transfer) - atmel_spi_next_message(spi->master); atmel_spi_unlock(as); - return 0; + msg->status = as->done_status; + spi_finalize_current_message(spi->master); + + return ret; } static void atmel_spi_cleanup(struct spi_device *spi) { - struct atmel_spi *as = spi_master_get_devdata(spi->master); struct atmel_spi_device *asd = spi->controller_state; unsigned gpio = (unsigned) spi->controller_data; if (!asd) return; - atmel_spi_lock(as); - if (as->stay == spi) { - as->stay = NULL; - cs_deactivate(as, spi); - } - atmel_spi_unlock(as); - spi->controller_state = NULL; gpio_free(gpio); kfree(asd); @@ -1510,7 +1311,7 @@ static int atmel_spi_probe(struct platform_device *pdev) if (irq < 0) return irq; - clk = clk_get(&pdev->dev, "spi_clk"); + clk = devm_clk_get(&pdev->dev, "spi_clk"); if (IS_ERR(clk)) return PTR_ERR(clk); @@ -1527,7 +1328,7 @@ static int atmel_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = master->dev.of_node ? 0 : 4; master->setup = atmel_spi_setup; - master->transfer = atmel_spi_transfer; + master->transfer_one_message = atmel_spi_transfer_one_message; master->cleanup = atmel_spi_cleanup; platform_set_drvdata(pdev, master); @@ -1543,7 +1344,6 @@ static int atmel_spi_probe(struct platform_device *pdev) goto out_free; spin_lock_init(&as->lock); - INIT_LIST_HEAD(&as->queue); as->pdev = pdev; as->regs = devm_ioremap_resource(&pdev->dev, regs); @@ -1555,6 +1355,8 @@ static int atmel_spi_probe(struct platform_device *pdev) as->irq = irq; as->clk = clk; + init_completion(&as->xfer_completion); + atmel_get_caps(as); as->use_dma = false; @@ -1570,14 +1372,11 @@ static int atmel_spi_probe(struct platform_device *pdev) dev_info(&pdev->dev, "Atmel SPI Controller using PIO only\n"); if (as->use_pdc) { - ret = request_irq(irq, atmel_spi_pdc_interrupt, 0, - dev_name(&pdev->dev), master); + ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pdc_interrupt, + 0, dev_name(&pdev->dev), master); } else { - tasklet_init(&as->tasklet, atmel_spi_tasklet_func, - (unsigned long)master); - - ret = request_irq(irq, atmel_spi_pio_interrupt, 0, - dev_name(&pdev->dev), master); + ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pio_interrupt, + 0, dev_name(&pdev->dev), master); } if (ret) goto out_unmap_regs; @@ -1603,7 +1402,7 @@ static int atmel_spi_probe(struct platform_device *pdev) dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n", (unsigned long)regs->start, irq); - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret) goto out_free_dma; @@ -1617,15 +1416,11 @@ out_free_dma: spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable_unprepare(clk); out_free_irq: - free_irq(irq, master); out_unmap_regs: out_free_buffer: - if (!as->use_pdc) - tasklet_kill(&as->tasklet); dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, as->buffer_dma); out_free: - clk_put(clk); spi_master_put(master); return ret; } @@ -1634,12 +1429,9 @@ static int atmel_spi_remove(struct platform_device *pdev) { struct spi_master *master = platform_get_drvdata(pdev); struct atmel_spi *as = spi_master_get_devdata(master); - struct spi_message *msg; - struct spi_transfer *xfer; /* reset the hardware and block queue progress */ spin_lock_irq(&as->lock); - as->stopping = 1; if (as->use_dma) { atmel_spi_stop_dma(as); atmel_spi_release_dma(as); @@ -1650,28 +1442,10 @@ static int atmel_spi_remove(struct platform_device *pdev) spi_readl(as, SR); spin_unlock_irq(&as->lock); - /* Terminate remaining queued transfers */ - list_for_each_entry(msg, &as->queue, queue) { - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if (!msg->is_dma_mapped - && (atmel_spi_use_dma(as, xfer) - || as->use_pdc)) - atmel_spi_dma_unmap_xfer(master, xfer); - } - msg->status = -ESHUTDOWN; - msg->complete(msg->context); - } - - if (!as->use_pdc) - tasklet_kill(&as->tasklet); dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer, as->buffer_dma); clk_disable_unprepare(as->clk); - clk_put(as->clk); - free_irq(as->irq, master); - - spi_unregister_master(master); return 0; } diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c new file mode 100644 index 000000000000..b528f9fc8bc0 --- /dev/null +++ b/drivers/spi/spi-bcm63xx-hsspi.c @@ -0,0 +1,475 @@ +/* + * Broadcom BCM63XX High Speed SPI Controller driver + * + * Copyright 2000-2010 Broadcom Corporation + * Copyright 2012-2013 Jonas Gorski <jogo@openwrt.org> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/workqueue.h> +#include <linux/mutex.h> + +#define HSSPI_GLOBAL_CTRL_REG 0x0 +#define GLOBAL_CTRL_CS_POLARITY_SHIFT 0 +#define GLOBAL_CTRL_CS_POLARITY_MASK 0x000000ff +#define GLOBAL_CTRL_PLL_CLK_CTRL_SHIFT 8 +#define GLOBAL_CTRL_PLL_CLK_CTRL_MASK 0x0000ff00 +#define GLOBAL_CTRL_CLK_GATE_SSOFF BIT(16) +#define GLOBAL_CTRL_CLK_POLARITY BIT(17) +#define GLOBAL_CTRL_MOSI_IDLE BIT(18) + +#define HSSPI_GLOBAL_EXT_TRIGGER_REG 0x4 + +#define HSSPI_INT_STATUS_REG 0x8 +#define HSSPI_INT_STATUS_MASKED_REG 0xc +#define HSSPI_INT_MASK_REG 0x10 + +#define HSSPI_PINGx_CMD_DONE(i) BIT((i * 8) + 0) +#define HSSPI_PINGx_RX_OVER(i) BIT((i * 8) + 1) +#define HSSPI_PINGx_TX_UNDER(i) BIT((i * 8) + 2) +#define HSSPI_PINGx_POLL_TIMEOUT(i) BIT((i * 8) + 3) +#define HSSPI_PINGx_CTRL_INVAL(i) BIT((i * 8) + 4) + +#define HSSPI_INT_CLEAR_ALL 0xff001f1f + +#define HSSPI_PINGPONG_COMMAND_REG(x) (0x80 + (x) * 0x40) +#define PINGPONG_CMD_COMMAND_MASK 0xf +#define PINGPONG_COMMAND_NOOP 0 +#define PINGPONG_COMMAND_START_NOW 1 +#define PINGPONG_COMMAND_START_TRIGGER 2 +#define PINGPONG_COMMAND_HALT 3 +#define PINGPONG_COMMAND_FLUSH 4 +#define PINGPONG_CMD_PROFILE_SHIFT 8 +#define PINGPONG_CMD_SS_SHIFT 12 + +#define HSSPI_PINGPONG_STATUS_REG(x) (0x84 + (x) * 0x40) + +#define HSSPI_PROFILE_CLK_CTRL_REG(x) (0x100 + (x) * 0x20) +#define CLK_CTRL_FREQ_CTRL_MASK 0x0000ffff +#define CLK_CTRL_SPI_CLK_2X_SEL BIT(14) +#define CLK_CTRL_ACCUM_RST_ON_LOOP BIT(15) + +#define HSSPI_PROFILE_SIGNAL_CTRL_REG(x) (0x104 + (x) * 0x20) +#define SIGNAL_CTRL_LATCH_RISING BIT(12) +#define SIGNAL_CTRL_LAUNCH_RISING BIT(13) +#define SIGNAL_CTRL_ASYNC_INPUT_PATH BIT(16) + +#define HSSPI_PROFILE_MODE_CTRL_REG(x) (0x108 + (x) * 0x20) +#define MODE_CTRL_MULTIDATA_RD_STRT_SHIFT 8 +#define MODE_CTRL_MULTIDATA_WR_STRT_SHIFT 12 +#define MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT 16 +#define MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT 18 +#define MODE_CTRL_MODE_3WIRE BIT(20) +#define MODE_CTRL_PREPENDBYTE_CNT_SHIFT 24 + +#define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200) + + +#define HSSPI_OP_CODE_SHIFT 13 +#define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT) +#define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT) +#define HSSPI_OP_WRITE (2 << HSSPI_OP_CODE_SHIFT) +#define HSSPI_OP_READ (3 << HSSPI_OP_CODE_SHIFT) +#define HSSPI_OP_SETIRQ (4 << HSSPI_OP_CODE_SHIFT) + +#define HSSPI_BUFFER_LEN 512 +#define HSSPI_OPCODE_LEN 2 + +#define HSSPI_MAX_PREPEND_LEN 15 + +#define HSSPI_MAX_SYNC_CLOCK 30000000 + +#define HSSPI_BUS_NUM 1 /* 0 is legacy SPI */ + +struct bcm63xx_hsspi { + struct completion done; + struct mutex bus_mutex; + + struct platform_device *pdev; + struct clk *clk; + void __iomem *regs; + u8 __iomem *fifo; + + u32 speed_hz; + u8 cs_polarity; +}; + +static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned cs, + bool active) +{ + u32 reg; + + mutex_lock(&bs->bus_mutex); + reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG); + + reg &= ~BIT(cs); + if (active == !(bs->cs_polarity & BIT(cs))) + reg |= BIT(cs); + + __raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG); + mutex_unlock(&bs->bus_mutex); +} + +static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, + struct spi_device *spi, int hz) +{ + unsigned profile = spi->chip_select; + u32 reg; + + reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz)); + __raw_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | reg, + bs->regs + HSSPI_PROFILE_CLK_CTRL_REG(profile)); + + reg = __raw_readl(bs->regs + HSSPI_PROFILE_SIGNAL_CTRL_REG(profile)); + if (hz > HSSPI_MAX_SYNC_CLOCK) + reg |= SIGNAL_CTRL_ASYNC_INPUT_PATH; + else + reg &= ~SIGNAL_CTRL_ASYNC_INPUT_PATH; + __raw_writel(reg, bs->regs + HSSPI_PROFILE_SIGNAL_CTRL_REG(profile)); + + mutex_lock(&bs->bus_mutex); + /* setup clock polarity */ + reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG); + reg &= ~GLOBAL_CTRL_CLK_POLARITY; + if (spi->mode & SPI_CPOL) + reg |= GLOBAL_CTRL_CLK_POLARITY; + __raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG); + mutex_unlock(&bs->bus_mutex); +} + +static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master); + unsigned chip_select = spi->chip_select; + u16 opcode = 0; + int pending = t->len; + int step_size = HSSPI_BUFFER_LEN; + const u8 *tx = t->tx_buf; + u8 *rx = t->rx_buf; + + bcm63xx_hsspi_set_clk(bs, spi, t->speed_hz); + bcm63xx_hsspi_set_cs(bs, spi->chip_select, true); + + if (tx && rx) + opcode = HSSPI_OP_READ_WRITE; + else if (tx) + opcode = HSSPI_OP_WRITE; + else if (rx) + opcode = HSSPI_OP_READ; + + if (opcode != HSSPI_OP_READ) + step_size -= HSSPI_OPCODE_LEN; + + __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT | + 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT | + 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff, + bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select)); + + while (pending > 0) { + int curr_step = min_t(int, step_size, pending); + + init_completion(&bs->done); + if (tx) { + memcpy_toio(bs->fifo + HSSPI_OPCODE_LEN, tx, curr_step); + tx += curr_step; + } + + __raw_writew(opcode | curr_step, bs->fifo); + + /* enable interrupt */ + __raw_writel(HSSPI_PINGx_CMD_DONE(0), + bs->regs + HSSPI_INT_MASK_REG); + + /* start the transfer */ + __raw_writel(!chip_select << PINGPONG_CMD_SS_SHIFT | + chip_select << PINGPONG_CMD_PROFILE_SHIFT | + PINGPONG_COMMAND_START_NOW, + bs->regs + HSSPI_PINGPONG_COMMAND_REG(0)); + + if (wait_for_completion_timeout(&bs->done, HZ) == 0) { + dev_err(&bs->pdev->dev, "transfer timed out!\n"); + return -ETIMEDOUT; + } + + if (rx) { + memcpy_fromio(rx, bs->fifo, curr_step); + rx += curr_step; + } + + pending -= curr_step; + } + + return 0; +} + +static int bcm63xx_hsspi_setup(struct spi_device *spi) +{ + struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master); + u32 reg; + + reg = __raw_readl(bs->regs + + HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select)); + reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING); + if (spi->mode & SPI_CPHA) + reg |= SIGNAL_CTRL_LAUNCH_RISING; + else + reg |= SIGNAL_CTRL_LATCH_RISING; + __raw_writel(reg, bs->regs + + HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select)); + + mutex_lock(&bs->bus_mutex); + reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG); + + /* only change actual polarities if there is no transfer */ + if ((reg & GLOBAL_CTRL_CS_POLARITY_MASK) == bs->cs_polarity) { + if (spi->mode & SPI_CS_HIGH) + reg |= BIT(spi->chip_select); + else + reg &= ~BIT(spi->chip_select); + __raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG); + } + + if (spi->mode & SPI_CS_HIGH) + bs->cs_polarity |= BIT(spi->chip_select); + else + bs->cs_polarity &= ~BIT(spi->chip_select); + + mutex_unlock(&bs->bus_mutex); + + return 0; +} + +static int bcm63xx_hsspi_transfer_one(struct spi_master *master, + struct spi_message *msg) +{ + struct bcm63xx_hsspi *bs = spi_master_get_devdata(master); + struct spi_transfer *t; + struct spi_device *spi = msg->spi; + int status = -EINVAL; + int dummy_cs; + u32 reg; + + /* This controller does not support keeping CS active during idle. + * To work around this, we use the following ugly hack: + * + * a. Invert the target chip select's polarity so it will be active. + * b. Select a "dummy" chip select to use as the hardware target. + * c. Invert the dummy chip select's polarity so it will be inactive + * during the actual transfers. + * d. Tell the hardware to send to the dummy chip select. Thanks to + * the multiplexed nature of SPI the actual target will receive + * the transfer and we see its response. + * + * e. At the end restore the polarities again to their default values. + */ + + dummy_cs = !spi->chip_select; + bcm63xx_hsspi_set_cs(bs, dummy_cs, true); + + list_for_each_entry(t, &msg->transfers, transfer_list) { + status = bcm63xx_hsspi_do_txrx(spi, t); + if (status) + break; + + msg->actual_length += t->len; + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (t->cs_change) + bcm63xx_hsspi_set_cs(bs, spi->chip_select, false); + } + + mutex_lock(&bs->bus_mutex); + reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG); + reg &= ~GLOBAL_CTRL_CS_POLARITY_MASK; + reg |= bs->cs_polarity; + __raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG); + mutex_unlock(&bs->bus_mutex); + + msg->status = status; + spi_finalize_current_message(master); + + return 0; +} + +static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id) +{ + struct bcm63xx_hsspi *bs = (struct bcm63xx_hsspi *)dev_id; + + if (__raw_readl(bs->regs + HSSPI_INT_STATUS_MASKED_REG) == 0) + return IRQ_NONE; + + __raw_writel(HSSPI_INT_CLEAR_ALL, bs->regs + HSSPI_INT_STATUS_REG); + __raw_writel(0, bs->regs + HSSPI_INT_MASK_REG); + + complete(&bs->done); + + return IRQ_HANDLED; +} + +static int bcm63xx_hsspi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct bcm63xx_hsspi *bs; + struct resource *res_mem; + void __iomem *regs; + struct device *dev = &pdev->dev; + struct clk *clk; + int irq, ret; + u32 reg, rate; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "no irq\n"); + return -ENXIO; + } + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res_mem); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + clk = devm_clk_get(dev, "hsspi"); + + if (IS_ERR(clk)) + return PTR_ERR(clk); + + rate = clk_get_rate(clk); + if (!rate) + return -EINVAL; + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + master = spi_alloc_master(&pdev->dev, sizeof(*bs)); + if (!master) { + ret = -ENOMEM; + goto out_disable_clk; + } + + bs = spi_master_get_devdata(master); + bs->pdev = pdev; + bs->clk = clk; + bs->regs = regs; + bs->speed_hz = rate; + bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0)); + + mutex_init(&bs->bus_mutex); + + master->bus_num = HSSPI_BUS_NUM; + master->num_chipselect = 8; + master->setup = bcm63xx_hsspi_setup; + master->transfer_one_message = bcm63xx_hsspi_transfer_one; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->auto_runtime_pm = true; + + platform_set_drvdata(pdev, master); + + /* Initialize the hardware */ + __raw_writel(0, bs->regs + HSSPI_INT_MASK_REG); + + /* clean up any pending interrupts */ + __raw_writel(HSSPI_INT_CLEAR_ALL, bs->regs + HSSPI_INT_STATUS_REG); + + /* read out default CS polarities */ + reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG); + bs->cs_polarity = reg & GLOBAL_CTRL_CS_POLARITY_MASK; + __raw_writel(reg | GLOBAL_CTRL_CLK_GATE_SSOFF, + bs->regs + HSSPI_GLOBAL_CTRL_REG); + + ret = devm_request_irq(dev, irq, bcm63xx_hsspi_interrupt, IRQF_SHARED, + pdev->name, bs); + + if (ret) + goto out_put_master; + + /* register and we are done */ + ret = devm_spi_register_master(dev, master); + if (ret) + goto out_put_master; + + return 0; + +out_put_master: + spi_master_put(master); +out_disable_clk: + clk_disable_unprepare(clk); + return ret; +} + + +static int bcm63xx_hsspi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct bcm63xx_hsspi *bs = spi_master_get_devdata(master); + + /* reset the hardware and block queue progress */ + __raw_writel(0, bs->regs + HSSPI_INT_MASK_REG); + clk_disable_unprepare(bs->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int bcm63xx_hsspi_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct bcm63xx_hsspi *bs = spi_master_get_devdata(master); + + spi_master_suspend(master); + clk_disable_unprepare(bs->clk); + + return 0; +} + +static int bcm63xx_hsspi_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct bcm63xx_hsspi *bs = spi_master_get_devdata(master); + int ret; + + ret = clk_prepare_enable(bs->clk); + if (ret) + return ret; + + spi_master_resume(master); + + return 0; +} +#endif + +static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(bcm63xx_hsspi_suspend, bcm63xx_hsspi_resume) +}; + +static struct platform_driver bcm63xx_hsspi_driver = { + .driver = { + .name = "bcm63xx-hsspi", + .owner = THIS_MODULE, + .pm = &bcm63xx_hsspi_pm_ops, + }, + .probe = bcm63xx_hsspi_probe, + .remove = bcm63xx_hsspi_remove, +}; + +module_platform_driver(bcm63xx_hsspi_driver); + +MODULE_ALIAS("platform:bcm63xx_hsspi"); +MODULE_DESCRIPTION("Broadcom BCM63xx High Speed SPI Controller driver"); +MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 469ecd876358..77286aef2adf 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -169,8 +169,6 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first, transfer_list); } - len -= prepend_len; - init_completion(&bs->done); /* Fill in the Message control register */ @@ -205,13 +203,7 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first, if (!timeout) return -ETIMEDOUT; - /* read out all data */ - rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); - - if (do_rx && rx_tail != len) - return -EIO; - - if (!rx_tail) + if (!do_rx) return 0; len = 0; @@ -345,22 +337,19 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "no irq\n"); - ret = -ENXIO; - goto out; + return -ENXIO; } - clk = clk_get(dev, "spi"); + clk = devm_clk_get(dev, "spi"); if (IS_ERR(clk)) { dev_err(dev, "no clock for device\n"); - ret = PTR_ERR(clk); - goto out; + return PTR_ERR(clk); } master = spi_alloc_master(dev, sizeof(*bs)); if (!master) { dev_err(dev, "out of memory\n"); - ret = -ENOMEM; - goto out_clk; + return -ENOMEM; } bs = spi_master_get_devdata(master); @@ -408,7 +397,10 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) } /* Initialize hardware */ - clk_prepare_enable(bs->clk); + ret = clk_prepare_enable(bs->clk); + if (ret) + goto out_err; + bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); /* register and we are done */ @@ -427,9 +419,6 @@ out_clk_disable: clk_disable_unprepare(clk); out_err: spi_master_put(master); -out_clk: - clk_put(clk); -out: return ret; } @@ -443,12 +432,11 @@ static int bcm63xx_spi_remove(struct platform_device *pdev) /* HW shutdown */ clk_disable_unprepare(bs->clk); - clk_put(bs->clk); return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int bcm63xx_spi_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); @@ -465,29 +453,27 @@ static int bcm63xx_spi_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct bcm63xx_spi *bs = spi_master_get_devdata(master); + int ret; - clk_prepare_enable(bs->clk); + ret = clk_prepare_enable(bs->clk); + if (ret) + return ret; spi_master_resume(master); return 0; } +#endif static const struct dev_pm_ops bcm63xx_spi_pm_ops = { - .suspend = bcm63xx_spi_suspend, - .resume = bcm63xx_spi_resume, + SET_SYSTEM_SLEEP_PM_OPS(bcm63xx_spi_suspend, bcm63xx_spi_resume) }; -#define BCM63XX_SPI_PM_OPS (&bcm63xx_spi_pm_ops) -#else -#define BCM63XX_SPI_PM_OPS NULL -#endif - static struct platform_driver bcm63xx_spi_driver = { .driver = { .name = "bcm63xx-spi", .owner = THIS_MODULE, - .pm = BCM63XX_SPI_PM_OPS, + .pm = &bcm63xx_spi_pm_ops, }, .probe = bcm63xx_spi_probe, .remove = bcm63xx_spi_remove, diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h index c16bf853c3eb..c616e41521be 100644 --- a/drivers/spi/spi-bitbang-txrx.h +++ b/drivers/spi/spi-bitbang-txrx.h @@ -38,7 +38,7 @@ * * Since this is software, the timings may not be exactly what your board's * chips need ... there may be several reasons you'd need to tweak timings - * in these routines, not just make to make it faster or slower to match a + * in these routines, not just to make it faster or slower to match a * particular CPU clock rate. */ diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index 6f03d7e6435d..374ba4a48a9e 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -1,7 +1,7 @@ /* * CLPS711X SPI bus driver * - * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * Copyright (C) 2012-2014 Alexander Shiyan <shc_work@mail.ru> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -198,7 +198,7 @@ static int spi_clps711x_probe(struct platform_device *pdev) ret = -EINVAL; goto err_out; } - if (gpio_request(hw->chipselect[i], DRIVER_NAME)) { + if (devm_gpio_request(&pdev->dev, hw->chipselect[i], NULL)) { dev_err(&pdev->dev, "Can't get CS GPIO %i\n", i); ret = -EINVAL; goto err_out; @@ -240,38 +240,21 @@ static int spi_clps711x_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Failed to register master\n"); err_out: - while (--i >= 0) - if (gpio_is_valid(hw->chipselect[i])) - gpio_free(hw->chipselect[i]); - spi_master_put(master); return ret; } -static int spi_clps711x_remove(struct platform_device *pdev) -{ - int i; - struct spi_master *master = platform_get_drvdata(pdev); - struct spi_clps711x_data *hw = spi_master_get_devdata(master); - - for (i = 0; i < master->num_chipselect; i++) - if (gpio_is_valid(hw->chipselect[i])) - gpio_free(hw->chipselect[i]); - - return 0; -} - static struct platform_driver clps711x_spi_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, }, .probe = spi_clps711x_probe, - .remove = spi_clps711x_remove, }; module_platform_driver(clps711x_spi_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); MODULE_DESCRIPTION("CLPS711X SPI bus driver"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index cc5b75d10c38..cabed8f9119e 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -397,44 +397,31 @@ static int mcfqspi_probe(struct platform_device *pdev) mcfqspi = spi_master_get_devdata(master); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(&pdev->dev, "platform_get_resource failed\n"); - status = -ENXIO; + mcfqspi->iobase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mcfqspi->iobase)) { + status = PTR_ERR(mcfqspi->iobase); goto fail0; } - if (!request_mem_region(res->start, resource_size(res), pdev->name)) { - dev_dbg(&pdev->dev, "request_mem_region failed\n"); - status = -EBUSY; - goto fail0; - } - - mcfqspi->iobase = ioremap(res->start, resource_size(res)); - if (!mcfqspi->iobase) { - dev_dbg(&pdev->dev, "ioremap failed\n"); - status = -ENOMEM; - goto fail1; - } - mcfqspi->irq = platform_get_irq(pdev, 0); if (mcfqspi->irq < 0) { dev_dbg(&pdev->dev, "platform_get_irq failed\n"); status = -ENXIO; - goto fail2; + goto fail0; } - status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, 0, - pdev->name, mcfqspi); + status = devm_request_irq(&pdev->dev, mcfqspi->irq, mcfqspi_irq_handler, + 0, pdev->name, mcfqspi); if (status) { dev_dbg(&pdev->dev, "request_irq failed\n"); - goto fail2; + goto fail0; } - mcfqspi->clk = clk_get(&pdev->dev, "qspi_clk"); + mcfqspi->clk = devm_clk_get(&pdev->dev, "qspi_clk"); if (IS_ERR(mcfqspi->clk)) { dev_dbg(&pdev->dev, "clk_get failed\n"); status = PTR_ERR(mcfqspi->clk); - goto fail3; + goto fail0; } clk_enable(mcfqspi->clk); @@ -445,7 +432,7 @@ static int mcfqspi_probe(struct platform_device *pdev) status = mcfqspi_cs_setup(mcfqspi); if (status) { dev_dbg(&pdev->dev, "error initializing cs_control\n"); - goto fail4; + goto fail1; } init_waitqueue_head(&mcfqspi->waitq); @@ -459,10 +446,10 @@ static int mcfqspi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, master); - status = spi_register_master(master); + status = devm_spi_register_master(&pdev->dev, master); if (status) { dev_dbg(&pdev->dev, "spi_register_master failed\n"); - goto fail5; + goto fail2; } pm_runtime_enable(mcfqspi->dev); @@ -470,17 +457,10 @@ static int mcfqspi_probe(struct platform_device *pdev) return 0; -fail5: - mcfqspi_cs_teardown(mcfqspi); -fail4: - clk_disable(mcfqspi->clk); - clk_put(mcfqspi->clk); -fail3: - free_irq(mcfqspi->irq, mcfqspi); fail2: - iounmap(mcfqspi->iobase); + mcfqspi_cs_teardown(mcfqspi); fail1: - release_mem_region(res->start, resource_size(res)); + clk_disable(mcfqspi->clk); fail0: spi_master_put(master); @@ -501,11 +481,6 @@ static int mcfqspi_remove(struct platform_device *pdev) mcfqspi_cs_teardown(mcfqspi); clk_disable(mcfqspi->clk); - clk_put(mcfqspi->clk); - free_irq(mcfqspi->irq, mcfqspi); - iounmap(mcfqspi->iobase); - release_mem_region(res->start, resource_size(res)); - spi_unregister_master(master); return 0; } diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 50b2d88c8190..5e7389faa2a0 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -396,10 +396,6 @@ static int davinci_spi_setup(struct spi_device *spi) dspi = spi_master_get_devdata(spi->master); pdata = &dspi->pdata; - /* if bits per word length is zero then set it default 8 */ - if (!spi->bits_per_word) - spi->bits_per_word = 8; - if (!(spi->mode & SPI_NO_CS)) { if ((pdata->chip_sel == NULL) || (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS)) @@ -853,7 +849,7 @@ static int davinci_spi_probe(struct platform_device *pdev) struct spi_master *master; struct davinci_spi *dspi; struct davinci_spi_platform_data *pdata; - struct resource *r, *mem; + struct resource *r; resource_size_t dma_rx_chan = SPI_NO_RESOURCE; resource_size_t dma_tx_chan = SPI_NO_RESOURCE; int i = 0, ret = 0; @@ -894,39 +890,33 @@ static int davinci_spi_probe(struct platform_device *pdev) dspi->pbase = r->start; - mem = request_mem_region(r->start, resource_size(r), pdev->name); - if (mem == NULL) { - ret = -EBUSY; + dspi->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(dspi->base)) { + ret = PTR_ERR(dspi->base); goto free_master; } - dspi->base = ioremap(r->start, resource_size(r)); - if (dspi->base == NULL) { - ret = -ENOMEM; - goto release_region; - } - dspi->irq = platform_get_irq(pdev, 0); if (dspi->irq <= 0) { ret = -EINVAL; - goto unmap_io; + goto free_master; } - ret = request_threaded_irq(dspi->irq, davinci_spi_irq, dummy_thread_fn, - 0, dev_name(&pdev->dev), dspi); + ret = devm_request_threaded_irq(&pdev->dev, dspi->irq, davinci_spi_irq, + dummy_thread_fn, 0, dev_name(&pdev->dev), dspi); if (ret) - goto unmap_io; + goto free_master; dspi->bitbang.master = master; if (dspi->bitbang.master == NULL) { ret = -ENODEV; - goto irq_free; + goto free_master; } - dspi->clk = clk_get(&pdev->dev, NULL); + dspi->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dspi->clk)) { ret = -ENODEV; - goto irq_free; + goto free_master; } clk_prepare_enable(dspi->clk); @@ -963,8 +953,8 @@ static int davinci_spi_probe(struct platform_device *pdev) goto free_clk; dev_info(&pdev->dev, "DMA: supported\n"); - dev_info(&pdev->dev, "DMA: RX channel: %d, TX channel: %d, " - "event queue: %d\n", dma_rx_chan, dma_tx_chan, + dev_info(&pdev->dev, "DMA: RX channel: %pa, TX channel: %pa, " + "event queue: %d\n", &dma_rx_chan, &dma_tx_chan, pdata->dma_event_q); } @@ -1015,13 +1005,6 @@ free_dma: dma_release_channel(dspi->dma_tx); free_clk: clk_disable_unprepare(dspi->clk); - clk_put(dspi->clk); -irq_free: - free_irq(dspi->irq, dspi); -unmap_io: - iounmap(dspi->base); -release_region: - release_mem_region(dspi->pbase, resource_size(r)); free_master: spi_master_put(master); err: @@ -1041,7 +1024,6 @@ static int davinci_spi_remove(struct platform_device *pdev) { struct davinci_spi *dspi; struct spi_master *master; - struct resource *r; master = platform_get_drvdata(pdev); dspi = spi_master_get_devdata(master); @@ -1049,11 +1031,6 @@ static int davinci_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&dspi->bitbang); clk_disable_unprepare(dspi->clk); - clk_put(dspi->clk); - free_irq(dspi->irq, dspi); - iounmap(dspi->base); - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(dspi->pbase, resource_size(r)); spi_master_put(master); return 0; diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 168c620947f4..9af56cdf1540 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -30,14 +30,13 @@ static int dw_spi_mmio_probe(struct platform_device *pdev) { struct dw_spi_mmio *dwsmmio; struct dw_spi *dws; - struct resource *mem, *ioarea; + struct resource *mem; int ret; - dwsmmio = kzalloc(sizeof(struct dw_spi_mmio), GFP_KERNEL); - if (!dwsmmio) { - ret = -ENOMEM; - goto err_end; - } + dwsmmio = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_mmio), + GFP_KERNEL); + if (!dwsmmio) + return -ENOMEM; dws = &dwsmmio->dws; @@ -45,80 +44,51 @@ static int dw_spi_mmio_probe(struct platform_device *pdev) mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { dev_err(&pdev->dev, "no mem resource?\n"); - ret = -EINVAL; - goto err_kfree; + return -EINVAL; } - ioarea = request_mem_region(mem->start, resource_size(mem), - pdev->name); - if (!ioarea) { - dev_err(&pdev->dev, "SPI region already claimed\n"); - ret = -EBUSY; - goto err_kfree; - } - - dws->regs = ioremap_nocache(mem->start, resource_size(mem)); - if (!dws->regs) { - dev_err(&pdev->dev, "SPI region already mapped\n"); - ret = -ENOMEM; - goto err_release_reg; + dws->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(dws->regs)) { + dev_err(&pdev->dev, "SPI region map failed\n"); + return PTR_ERR(dws->regs); } dws->irq = platform_get_irq(pdev, 0); if (dws->irq < 0) { dev_err(&pdev->dev, "no irq resource?\n"); - ret = dws->irq; /* -ENXIO */ - goto err_unmap; + return dws->irq; /* -ENXIO */ } - dwsmmio->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(dwsmmio->clk)) { - ret = PTR_ERR(dwsmmio->clk); - goto err_unmap; - } - clk_enable(dwsmmio->clk); + dwsmmio->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(dwsmmio->clk)) + return PTR_ERR(dwsmmio->clk); + ret = clk_prepare_enable(dwsmmio->clk); + if (ret) + return ret; - dws->parent_dev = &pdev->dev; dws->bus_num = 0; dws->num_cs = 4; dws->max_freq = clk_get_rate(dwsmmio->clk); - ret = dw_spi_add_host(dws); + ret = dw_spi_add_host(&pdev->dev, dws); if (ret) - goto err_clk; + goto out; platform_set_drvdata(pdev, dwsmmio); return 0; -err_clk: - clk_disable(dwsmmio->clk); - clk_put(dwsmmio->clk); - dwsmmio->clk = NULL; -err_unmap: - iounmap(dws->regs); -err_release_reg: - release_mem_region(mem->start, resource_size(mem)); -err_kfree: - kfree(dwsmmio); -err_end: +out: + clk_disable_unprepare(dwsmmio->clk); return ret; } static int dw_spi_mmio_remove(struct platform_device *pdev) { struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev); - struct resource *mem; - - clk_disable(dwsmmio->clk); - clk_put(dwsmmio->clk); - dwsmmio->clk = NULL; + clk_disable_unprepare(dwsmmio->clk); dw_spi_remove_host(&dwsmmio->dws); - iounmap(dwsmmio->dws.regs); - kfree(dwsmmio); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); return 0; } diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 66fa9955ea14..d4603efbd9bf 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -43,35 +43,25 @@ static int spi_pci_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n", pdev->vendor, pdev->device); - ret = pci_enable_device(pdev); + ret = pcim_enable_device(pdev); if (ret) return ret; - dwpci = kzalloc(sizeof(struct dw_spi_pci), GFP_KERNEL); - if (!dwpci) { - ret = -ENOMEM; - goto err_disable; - } + dwpci = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_pci), + GFP_KERNEL); + if (!dwpci) + return -ENOMEM; dwpci->pdev = pdev; dws = &dwpci->dws; /* Get basic io resource and map it */ dws->paddr = pci_resource_start(pdev, pci_bar); - dws->iolen = pci_resource_len(pdev, pci_bar); - ret = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev)); + ret = pcim_iomap_regions(pdev, 1, dev_name(&pdev->dev)); if (ret) - goto err_kfree; - - dws->regs = ioremap_nocache((unsigned long)dws->paddr, - pci_resource_len(pdev, pci_bar)); - if (!dws->regs) { - ret = -ENOMEM; - goto err_release_reg; - } + return ret; - dws->parent_dev = &pdev->dev; dws->bus_num = 0; dws->num_cs = 4; dws->irq = pdev->irq; @@ -83,26 +73,17 @@ static int spi_pci_probe(struct pci_dev *pdev, if (pdev->device == 0x0800) { ret = dw_spi_mid_init(dws); if (ret) - goto err_unmap; + return ret; } - ret = dw_spi_add_host(dws); + ret = dw_spi_add_host(&pdev->dev, dws); if (ret) - goto err_unmap; + return ret; /* PCI hook and SPI hook use the same drv data */ pci_set_drvdata(pdev, dwpci); - return 0; -err_unmap: - iounmap(dws->regs); -err_release_reg: - pci_release_region(pdev, pci_bar); -err_kfree: - kfree(dwpci); -err_disable: - pci_disable_device(pdev); - return ret; + return 0; } static void spi_pci_remove(struct pci_dev *pdev) @@ -110,10 +91,6 @@ static void spi_pci_remove(struct pci_dev *pdev) struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); dw_spi_remove_host(&dwpci->dws); - iounmap(dwpci->dws.regs); - pci_release_region(pdev, 0); - kfree(dwpci); - pci_disable_device(pdev); } #ifdef CONFIG_PM diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index b897c4adb39d..bf98d63d92b3 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -427,7 +427,6 @@ static void pump_transfers(unsigned long data) dws->tx_end = dws->tx + transfer->len; dws->rx = transfer->rx_buf; dws->rx_end = dws->rx + transfer->len; - dws->cs_change = transfer->cs_change; dws->len = dws->cur_transfer->len; if (chip != dws->prev_chip) cs_change = 1; @@ -620,9 +619,11 @@ static int dw_spi_setup(struct spi_device *spi) /* Only alloc on first setup */ chip = spi_get_ctldata(spi); if (!chip) { - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + chip = devm_kzalloc(&spi->dev, sizeof(struct chip_data), + GFP_KERNEL); if (!chip) return -ENOMEM; + spi_set_ctldata(spi, chip); } /* @@ -667,7 +668,6 @@ static int dw_spi_setup(struct spi_device *spi) | (spi->mode << SPI_MODE_OFFSET) | (chip->tmode << SPI_TMOD_OFFSET); - spi_set_ctldata(spi, chip); return 0; } @@ -776,18 +776,16 @@ static void spi_hw_init(struct dw_spi *dws) } } -int dw_spi_add_host(struct dw_spi *dws) +int dw_spi_add_host(struct device *dev, struct dw_spi *dws) { struct spi_master *master; int ret; BUG_ON(dws == NULL); - master = spi_alloc_master(dws->parent_dev, 0); - if (!master) { - ret = -ENOMEM; - goto exit; - } + master = spi_alloc_master(dev, 0); + if (!master) + return -ENOMEM; dws->master = master; dws->type = SSI_MOTO_SPI; @@ -797,7 +795,7 @@ int dw_spi_add_host(struct dw_spi *dws) snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num); - ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, + ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED, dws->name, dws); if (ret < 0) { dev_err(&master->dev, "can not get IRQ\n"); @@ -836,7 +834,7 @@ int dw_spi_add_host(struct dw_spi *dws) } spi_master_set_devdata(master, dws); - ret = spi_register_master(master); + ret = devm_spi_register_master(dev, master); if (ret) { dev_err(&master->dev, "problem registering spi master\n"); goto err_queue_alloc; @@ -851,10 +849,8 @@ err_queue_alloc: dws->dma_ops->dma_exit(dws); err_diable_hw: spi_enable_chip(dws, 0); - free_irq(dws->irq, dws); err_free_master: spi_master_put(master); -exit: return ret; } EXPORT_SYMBOL_GPL(dw_spi_add_host); @@ -878,10 +874,6 @@ void dw_spi_remove_host(struct dw_spi *dws) spi_enable_chip(dws, 0); /* Disable clk */ spi_set_clk(dws, 0); - free_irq(dws->irq, dws); - - /* Disconnect from the SPI framework */ - spi_unregister_master(dws->master); } EXPORT_SYMBOL_GPL(dw_spi_remove_host); diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 9c57c078031e..587643dae11e 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -92,13 +92,11 @@ struct dw_spi_dma_ops { struct dw_spi { struct spi_master *master; struct spi_device *cur_dev; - struct device *parent_dev; enum dw_ssi_type type; char name[16]; void __iomem *regs; unsigned long paddr; - u32 iolen; int irq; u32 fifo_len; /* depth of the FIFO buffer */ u32 max_freq; /* max bus freq supported */ @@ -135,7 +133,6 @@ struct dw_spi { u8 n_bytes; /* current is a 1/2 bytes op */ u8 max_bits_per_word; /* maxim is 16b */ u32 dma_width; - int cs_change; irqreturn_t (*transfer_handler)(struct dw_spi *dws); void (*cs_control)(u32 command); @@ -231,7 +228,7 @@ struct dw_spi_chip { void (*cs_control)(u32 command); }; -extern int dw_spi_add_host(struct dw_spi *dws); +extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws); extern void dw_spi_remove_host(struct dw_spi *dws); extern int dw_spi_suspend_host(struct dw_spi *dws); extern int dw_spi_resume_host(struct dw_spi *dws); diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c index c7a74f0ef892..dd5bd468e962 100644 --- a/drivers/spi/spi-falcon.c +++ b/drivers/spi/spi-falcon.c @@ -433,21 +433,12 @@ static int falcon_sflash_probe(struct platform_device *pdev) platform_set_drvdata(pdev, priv); - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret) spi_master_put(master); return ret; } -static int falcon_sflash_remove(struct platform_device *pdev) -{ - struct falcon_sflash *priv = platform_get_drvdata(pdev); - - spi_unregister_master(priv->master); - - return 0; -} - static const struct of_device_id falcon_sflash_match[] = { { .compatible = "lantiq,sflash-falcon" }, {}, @@ -456,7 +447,6 @@ MODULE_DEVICE_TABLE(of, falcon_sflash_match); static struct platform_driver falcon_sflash_driver = { .probe = falcon_sflash_probe, - .remove = falcon_sflash_remove, .driver = { .name = DRV_NAME, .owner = THIS_MODULE, diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 8641b03bdd7a..ec79f726672a 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -320,8 +320,10 @@ static void dspi_chipselect(struct spi_device *spi, int value) switch (value) { case BITBANG_CS_ACTIVE: pushr |= SPI_PUSHR_CONT; + break; case BITBANG_CS_INACTIVE: pushr &= ~SPI_PUSHR_CONT; + break; } writel(pushr, dspi->base + SPI_PUSHR); @@ -373,9 +375,6 @@ static int dspi_setup(struct spi_device *spi) if (!spi->max_speed_hz) return -EINVAL; - if (!spi->bits_per_word) - spi->bits_per_word = 8; - return dspi_setup_transfer(spi, NULL); } diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index b80f2f70fef7..a5474ef9d2a0 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -206,7 +206,8 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, #define MX51_ECSPI_STAT_RR (1 << 3) /* MX51 eCSPI */ -static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi) +static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi, + unsigned int *fres) { /* * there are two 4-bit dividers, the pre-divider divides by @@ -234,6 +235,10 @@ static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi) pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n", __func__, fin, fspi, post, pre); + + /* Resulting frequency for the SCLK line. */ + *fres = (fin / (pre + 1)) >> post; + return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) | (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET); } @@ -264,6 +269,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0; + u32 clk = config->speed_hz, delay; /* * The hardware seems to have a race condition when changing modes. The @@ -275,7 +281,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, ctrl |= MX51_ECSPI_CTRL_MODE_MASK; /* set clock speed */ - ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz); + ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz, &clk); /* set chip select to use */ ctrl |= MX51_ECSPI_CTRL_CS(config->cs); @@ -297,6 +303,23 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); + /* + * Wait until the changes in the configuration register CONFIGREG + * propagate into the hardware. It takes exactly one tick of the + * SCLK clock, but we will wait two SCLK clock just to be sure. The + * effect of the delay it takes for the hardware to apply changes + * is noticable if the SCLK clock run very slow. In such a case, if + * the polarity of SCLK should be inverted, the GPIO ChipSelect might + * be asserted before the SCLK polarity changes, which would disrupt + * the SPI communication as the device on the other end would consider + * the change of SCLK polarity as a clock tick already. + */ + delay = (2 * 1000000) / clk; + if (likely(delay < 10)) /* SCLK is faster than 100 kHz */ + udelay(delay); + else /* SCLK is _very_ slow */ + usleep_range(delay, delay + 10); + return 0; } diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 3adebfa22e3d..79e5aa2250c8 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -111,14 +111,6 @@ static int mxs_spi_setup_transfer(struct spi_device *dev, return 0; } -static int mxs_spi_setup(struct spi_device *dev) -{ - if (!dev->bits_per_word) - dev->bits_per_word = 8; - - return 0; -} - static u32 mxs_spi_cs_to_reg(unsigned cs) { u32 select = 0; @@ -502,7 +494,6 @@ static int mxs_spi_probe(struct platform_device *pdev) return -ENOMEM; master->transfer_one_message = mxs_spi_transfer_one; - master->setup = mxs_spi_setup; master->bits_per_word_mask = SPI_BPW_MASK(8); master->mode_bits = SPI_CPOL | SPI_CPHA; master->num_chipselect = 3; diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 7765b1999537..cbc68848789d 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1066,6 +1066,8 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) pdata->num_chipselect = 1; pdata->enable_dma = true; + pdata->tx_chan_id = -1; + pdata->rx_chan_id = -1; return pdata; } diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 9e829cee7357..d1e89bb352d8 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -37,117 +37,145 @@ #include <linux/spi/spi.h> #include <linux/spi/rspi.h> -#define RSPI_SPCR 0x00 -#define RSPI_SSLP 0x01 -#define RSPI_SPPCR 0x02 -#define RSPI_SPSR 0x03 -#define RSPI_SPDR 0x04 -#define RSPI_SPSCR 0x08 -#define RSPI_SPSSR 0x09 -#define RSPI_SPBR 0x0a -#define RSPI_SPDCR 0x0b -#define RSPI_SPCKD 0x0c -#define RSPI_SSLND 0x0d -#define RSPI_SPND 0x0e -#define RSPI_SPCR2 0x0f -#define RSPI_SPCMD0 0x10 -#define RSPI_SPCMD1 0x12 -#define RSPI_SPCMD2 0x14 -#define RSPI_SPCMD3 0x16 -#define RSPI_SPCMD4 0x18 -#define RSPI_SPCMD5 0x1a -#define RSPI_SPCMD6 0x1c -#define RSPI_SPCMD7 0x1e +#define RSPI_SPCR 0x00 /* Control Register */ +#define RSPI_SSLP 0x01 /* Slave Select Polarity Register */ +#define RSPI_SPPCR 0x02 /* Pin Control Register */ +#define RSPI_SPSR 0x03 /* Status Register */ +#define RSPI_SPDR 0x04 /* Data Register */ +#define RSPI_SPSCR 0x08 /* Sequence Control Register */ +#define RSPI_SPSSR 0x09 /* Sequence Status Register */ +#define RSPI_SPBR 0x0a /* Bit Rate Register */ +#define RSPI_SPDCR 0x0b /* Data Control Register */ +#define RSPI_SPCKD 0x0c /* Clock Delay Register */ +#define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */ +#define RSPI_SPND 0x0e /* Next-Access Delay Register */ +#define RSPI_SPCR2 0x0f /* Control Register 2 */ +#define RSPI_SPCMD0 0x10 /* Command Register 0 */ +#define RSPI_SPCMD1 0x12 /* Command Register 1 */ +#define RSPI_SPCMD2 0x14 /* Command Register 2 */ +#define RSPI_SPCMD3 0x16 /* Command Register 3 */ +#define RSPI_SPCMD4 0x18 /* Command Register 4 */ +#define RSPI_SPCMD5 0x1a /* Command Register 5 */ +#define RSPI_SPCMD6 0x1c /* Command Register 6 */ +#define RSPI_SPCMD7 0x1e /* Command Register 7 */ +#define RSPI_SPBFCR 0x20 /* Buffer Control Register */ +#define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */ /*qspi only */ -#define QSPI_SPBFCR 0x18 -#define QSPI_SPBDCR 0x1a -#define QSPI_SPBMUL0 0x1c -#define QSPI_SPBMUL1 0x20 -#define QSPI_SPBMUL2 0x24 -#define QSPI_SPBMUL3 0x28 - -/* SPCR */ -#define SPCR_SPRIE 0x80 -#define SPCR_SPE 0x40 -#define SPCR_SPTIE 0x20 -#define SPCR_SPEIE 0x10 -#define SPCR_MSTR 0x08 -#define SPCR_MODFEN 0x04 -#define SPCR_TXMD 0x02 -#define SPCR_SPMS 0x01 - -/* SSLP */ -#define SSLP_SSL1P 0x02 -#define SSLP_SSL0P 0x01 - -/* SPPCR */ -#define SPPCR_MOIFE 0x20 -#define SPPCR_MOIFV 0x10 +#define QSPI_SPBFCR 0x18 /* Buffer Control Register */ +#define QSPI_SPBDCR 0x1a /* Buffer Data Count Register */ +#define QSPI_SPBMUL0 0x1c /* Transfer Data Length Multiplier Setting Register 0 */ +#define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */ +#define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */ +#define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */ + +/* SPCR - Control Register */ +#define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */ +#define SPCR_SPE 0x40 /* Function Enable */ +#define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */ +#define SPCR_SPEIE 0x10 /* Error Interrupt Enable */ +#define SPCR_MSTR 0x08 /* Master/Slave Mode Select */ +#define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */ +/* RSPI on SH only */ +#define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */ +#define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */ +/* QSPI on R-Car M2 only */ +#define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */ +#define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */ + +/* SSLP - Slave Select Polarity Register */ +#define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */ +#define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */ + +/* SPPCR - Pin Control Register */ +#define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */ +#define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */ #define SPPCR_SPOM 0x04 -#define SPPCR_SPLP2 0x02 -#define SPPCR_SPLP 0x01 - -/* SPSR */ -#define SPSR_SPRF 0x80 -#define SPSR_SPTEF 0x20 -#define SPSR_PERF 0x08 -#define SPSR_MODF 0x04 -#define SPSR_IDLNF 0x02 -#define SPSR_OVRF 0x01 - -/* SPSCR */ -#define SPSCR_SPSLN_MASK 0x07 - -/* SPSSR */ -#define SPSSR_SPECM_MASK 0x70 -#define SPSSR_SPCP_MASK 0x07 - -/* SPDCR */ -#define SPDCR_SPLW 0x20 -#define SPDCR_SPRDTD 0x10 +#define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */ +#define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */ + +#define SPPCR_IO3FV 0x04 /* Single-/Dual-SPI Mode IO3 Output Fixed Value */ +#define SPPCR_IO2FV 0x04 /* Single-/Dual-SPI Mode IO2 Output Fixed Value */ + +/* SPSR - Status Register */ +#define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */ +#define SPSR_TEND 0x40 /* Transmit End */ +#define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */ +#define SPSR_PERF 0x08 /* Parity Error Flag */ +#define SPSR_MODF 0x04 /* Mode Fault Error Flag */ +#define SPSR_IDLNF 0x02 /* RSPI Idle Flag */ +#define SPSR_OVRF 0x01 /* Overrun Error Flag */ + +/* SPSCR - Sequence Control Register */ +#define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */ + +/* SPSSR - Sequence Status Register */ +#define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */ +#define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */ + +/* SPDCR - Data Control Register */ +#define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */ +#define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */ +#define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */ +#define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0) +#define SPDCR_SPLWORD SPDCR_SPLW1 +#define SPDCR_SPLBYTE SPDCR_SPLW0 +#define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */ +#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select */ #define SPDCR_SLSEL1 0x08 #define SPDCR_SLSEL0 0x04 -#define SPDCR_SLSEL_MASK 0x0c +#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select */ #define SPDCR_SPFC1 0x02 #define SPDCR_SPFC0 0x01 +#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) */ -/* SPCKD */ -#define SPCKD_SCKDL_MASK 0x07 +/* SPCKD - Clock Delay Register */ +#define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */ -/* SSLND */ -#define SSLND_SLNDL_MASK 0x07 +/* SSLND - Slave Select Negation Delay Register */ +#define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */ -/* SPND */ -#define SPND_SPNDL_MASK 0x07 +/* SPND - Next-Access Delay Register */ +#define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */ -/* SPCR2 */ -#define SPCR2_PTE 0x08 -#define SPCR2_SPIE 0x04 -#define SPCR2_SPOE 0x02 -#define SPCR2_SPPE 0x01 +/* SPCR2 - Control Register 2 */ +#define SPCR2_PTE 0x08 /* Parity Self-Test Enable */ +#define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */ +#define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */ +#define SPCR2_SPPE 0x01 /* Parity Enable */ -/* SPCMDn */ -#define SPCMD_SCKDEN 0x8000 -#define SPCMD_SLNDEN 0x4000 -#define SPCMD_SPNDEN 0x2000 -#define SPCMD_LSBF 0x1000 -#define SPCMD_SPB_MASK 0x0f00 +/* SPCMDn - Command Registers */ +#define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */ +#define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */ +#define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */ +#define SPCMD_LSBF 0x1000 /* LSB First */ +#define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */ #define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK) #define SPCMD_SPB_8BIT 0x0000 /* qspi only */ #define SPCMD_SPB_16BIT 0x0100 #define SPCMD_SPB_20BIT 0x0000 #define SPCMD_SPB_24BIT 0x0100 #define SPCMD_SPB_32BIT 0x0200 -#define SPCMD_SSLKP 0x0080 -#define SPCMD_SSLA_MASK 0x0030 -#define SPCMD_BRDV_MASK 0x000c -#define SPCMD_CPOL 0x0002 -#define SPCMD_CPHA 0x0001 - -/* SPBFCR */ -#define SPBFCR_TXRST 0x80 /* qspi only */ -#define SPBFCR_RXRST 0x40 /* qspi only */ +#define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */ +#define SPCMD_SPIMOD_MASK 0x0060 /* SPI Operating Mode (QSPI only) */ +#define SPCMD_SPIMOD1 0x0040 +#define SPCMD_SPIMOD0 0x0020 +#define SPCMD_SPIMOD_SINGLE 0 +#define SPCMD_SPIMOD_DUAL SPCMD_SPIMOD0 +#define SPCMD_SPIMOD_QUAD SPCMD_SPIMOD1 +#define SPCMD_SPRW 0x0010 /* SPI Read/Write Access (Dual/Quad) */ +#define SPCMD_SSLA_MASK 0x0030 /* SSL Assert Signal Setting (RSPI) */ +#define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */ +#define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */ +#define SPCMD_CPHA 0x0001 /* Clock Phase Setting */ + +/* SPBFCR - Buffer Control Register */ +#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset (qspi only) */ +#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset (qspi only) */ +#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */ +#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */ + +#define DUMMY_DATA 0x00 struct rspi_data { void __iomem *addr; @@ -158,7 +186,8 @@ struct rspi_data { wait_queue_head_t wait; spinlock_t lock; struct clk *clk; - unsigned char spsr; + u8 spsr; + u16 spcmd; const struct spi_ops *ops; /* for dmaengine */ @@ -170,34 +199,35 @@ struct rspi_data { unsigned dma_callbacked:1; }; -static void rspi_write8(struct rspi_data *rspi, u8 data, u16 offset) +static void rspi_write8(const struct rspi_data *rspi, u8 data, u16 offset) { iowrite8(data, rspi->addr + offset); } -static void rspi_write16(struct rspi_data *rspi, u16 data, u16 offset) +static void rspi_write16(const struct rspi_data *rspi, u16 data, u16 offset) { iowrite16(data, rspi->addr + offset); } -static void rspi_write32(struct rspi_data *rspi, u32 data, u16 offset) +static void rspi_write32(const struct rspi_data *rspi, u32 data, u16 offset) { iowrite32(data, rspi->addr + offset); } -static u8 rspi_read8(struct rspi_data *rspi, u16 offset) +static u8 rspi_read8(const struct rspi_data *rspi, u16 offset) { return ioread8(rspi->addr + offset); } -static u16 rspi_read16(struct rspi_data *rspi, u16 offset) +static u16 rspi_read16(const struct rspi_data *rspi, u16 offset) { return ioread16(rspi->addr + offset); } /* optional functions */ struct spi_ops { - int (*set_config_register)(struct rspi_data *rspi, int access_size); + int (*set_config_register)(const struct rspi_data *rspi, + int access_size); int (*send_pio)(struct rspi_data *rspi, struct spi_message *mesg, struct spi_transfer *t); int (*receive_pio)(struct rspi_data *rspi, struct spi_message *mesg, @@ -208,7 +238,8 @@ struct spi_ops { /* * functions for RSPI */ -static int rspi_set_config_register(struct rspi_data *rspi, int access_size) +static int rspi_set_config_register(const struct rspi_data *rspi, + int access_size) { int spbr; @@ -231,7 +262,7 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, 0x00, RSPI_SPCR2); /* Sets SPCMD */ - rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP, + rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | rspi->spcmd, RSPI_SPCMD0); /* Sets RSPI mode */ @@ -243,7 +274,8 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size) /* * functions for QSPI */ -static int qspi_set_config_register(struct rspi_data *rspi, int access_size) +static int qspi_set_config_register(const struct rspi_data *rspi, + int access_size) { u16 spcmd; int spbr; @@ -268,10 +300,10 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) spcmd = SPCMD_SPB_8BIT; else if (access_size == 16) spcmd = SPCMD_SPB_16BIT; - else if (access_size == 32) + else spcmd = SPCMD_SPB_32BIT; - spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SSLKP | SPCMD_SPNDEN; + spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | rspi->spcmd | SPCMD_SPNDEN; /* Resets transfer data length */ rspi_write32(rspi, 0, QSPI_SPBMUL0); @@ -292,12 +324,12 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) #define set_config_register(spi, n) spi->ops->set_config_register(spi, n) -static void rspi_enable_irq(struct rspi_data *rspi, u8 enable) +static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable) { rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR); } -static void rspi_disable_irq(struct rspi_data *rspi, u8 disable) +static void rspi_disable_irq(const struct rspi_data *rspi, u8 disable) { rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~disable, RSPI_SPCR); } @@ -316,12 +348,12 @@ static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask, return 0; } -static void rspi_assert_ssl(struct rspi_data *rspi) +static void rspi_assert_ssl(const struct rspi_data *rspi) { rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR); } -static void rspi_negate_ssl(struct rspi_data *rspi) +static void rspi_negate_ssl(const struct rspi_data *rspi) { rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR); } @@ -330,9 +362,7 @@ static int rspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg, struct spi_transfer *t) { int remain = t->len; - u8 *data; - - data = (u8 *)t->tx_buf; + const u8 *data = t->tx_buf; while (remain > 0) { rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, RSPI_SPCR); @@ -348,7 +378,7 @@ static int rspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg, remain--; } - /* Waiting for the last transmition */ + /* Waiting for the last transmission */ rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); return 0; @@ -358,12 +388,11 @@ static int qspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg, struct spi_transfer *t) { int remain = t->len; - u8 *data; + const u8 *data = t->tx_buf; rspi_write8(rspi, SPBFCR_TXRST, QSPI_SPBFCR); rspi_write8(rspi, 0x00, QSPI_SPBFCR); - data = (u8 *)t->tx_buf; while (remain > 0) { if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { @@ -383,7 +412,7 @@ static int qspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg, remain--; } - /* Waiting for the last transmition */ + /* Waiting for the last transmission */ rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); return 0; @@ -399,8 +428,8 @@ static void rspi_dma_complete(void *arg) wake_up_interruptible(&rspi->wait); } -static int rspi_dma_map_sg(struct scatterlist *sg, void *buf, unsigned len, - struct dma_chan *chan, +static int rspi_dma_map_sg(struct scatterlist *sg, const void *buf, + unsigned len, struct dma_chan *chan, enum dma_transfer_direction dir) { sg_init_table(sg, 1); @@ -440,12 +469,13 @@ static void rspi_memory_from_8bit(void *buf, const void *data, unsigned len) static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t) { struct scatterlist sg; - void *buf = NULL; + const void *buf = NULL; struct dma_async_tx_descriptor *desc; unsigned len; int ret = 0; if (rspi->dma_width_16bit) { + void *tmp; /* * If DMAC bus width is 16-bit, the driver allocates a dummy * buffer. And, the driver converts original data into the @@ -454,13 +484,14 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t) * DMAC data: 1st byte, dummy, 2nd byte, dummy ... */ len = t->len * 2; - buf = kmalloc(len, GFP_KERNEL); - if (!buf) + tmp = kmalloc(len, GFP_KERNEL); + if (!tmp) return -ENOMEM; - rspi_memory_to_8bit(buf, t->tx_buf, t->len); + rspi_memory_to_8bit(tmp, t->tx_buf, t->len); + buf = tmp; } else { len = t->len; - buf = (void *)t->tx_buf; + buf = t->tx_buf; } if (!rspi_dma_map_sg(&sg, buf, len, rspi->chan_tx, DMA_TO_DEVICE)) { @@ -508,9 +539,9 @@ end_nomap: return ret; } -static void rspi_receive_init(struct rspi_data *rspi) +static void rspi_receive_init(const struct rspi_data *rspi) { - unsigned char spsr; + u8 spsr; spsr = rspi_read8(rspi, RSPI_SPSR); if (spsr & SPSR_SPRF) @@ -528,7 +559,7 @@ static int rspi_receive_pio(struct rspi_data *rspi, struct spi_message *mesg, rspi_receive_init(rspi); - data = (u8 *)t->rx_buf; + data = t->rx_buf; while (remain > 0) { rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, RSPI_SPCR); @@ -539,7 +570,7 @@ static int rspi_receive_pio(struct rspi_data *rspi, struct spi_message *mesg, return -ETIMEDOUT; } /* dummy write for generate clock */ - rspi_write16(rspi, 0x00, RSPI_SPDR); + rspi_write16(rspi, DUMMY_DATA, RSPI_SPDR); if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) { dev_err(&rspi->master->dev, @@ -556,9 +587,9 @@ static int rspi_receive_pio(struct rspi_data *rspi, struct spi_message *mesg, return 0; } -static void qspi_receive_init(struct rspi_data *rspi) +static void qspi_receive_init(const struct rspi_data *rspi) { - unsigned char spsr; + u8 spsr; spsr = rspi_read8(rspi, RSPI_SPSR); if (spsr & SPSR_SPRF) @@ -575,7 +606,7 @@ static int qspi_receive_pio(struct rspi_data *rspi, struct spi_message *mesg, qspi_receive_init(rspi); - data = (u8 *)t->rx_buf; + data = t->rx_buf; while (remain > 0) { if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { @@ -584,7 +615,7 @@ static int qspi_receive_pio(struct rspi_data *rspi, struct spi_message *mesg, return -ETIMEDOUT; } /* dummy write for generate clock */ - rspi_write8(rspi, 0x00, RSPI_SPDR); + rspi_write8(rspi, DUMMY_DATA, RSPI_SPDR); if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) { dev_err(&rspi->master->dev, @@ -704,7 +735,7 @@ end_nomap: return ret; } -static int rspi_is_dma(struct rspi_data *rspi, struct spi_transfer *t) +static int rspi_is_dma(const struct rspi_data *rspi, struct spi_transfer *t) { if (t->tx_buf && rspi->chan_tx) return 1; @@ -771,10 +802,14 @@ static int rspi_setup(struct spi_device *spi) { struct rspi_data *rspi = spi_master_get_devdata(spi->master); - if (!spi->bits_per_word) - spi->bits_per_word = 8; rspi->max_speed_hz = spi->max_speed_hz; + rspi->spcmd = SPCMD_SSLKP; + if (spi->mode & SPI_CPOL) + rspi->spcmd |= SPCMD_CPOL; + if (spi->mode & SPI_CPHA) + rspi->spcmd |= SPCMD_CPHA; + set_config_register(rspi, 8); return 0; @@ -802,10 +837,10 @@ static void rspi_cleanup(struct spi_device *spi) static irqreturn_t rspi_irq(int irq, void *_sr) { - struct rspi_data *rspi = (struct rspi_data *)_sr; - unsigned long spsr; + struct rspi_data *rspi = _sr; + u8 spsr; irqreturn_t ret = IRQ_NONE; - unsigned char disable_irq = 0; + u8 disable_irq = 0; rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR); if (spsr & SPSR_SPRF) @@ -825,7 +860,7 @@ static irqreturn_t rspi_irq(int irq, void *_sr) static int rspi_request_dma(struct rspi_data *rspi, struct platform_device *pdev) { - struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev); + const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev); struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); dma_cap_mask_t mask; struct dma_slave_config cfg; @@ -887,11 +922,8 @@ static int rspi_remove(struct platform_device *pdev) { struct rspi_data *rspi = platform_get_drvdata(pdev); - spi_unregister_master(rspi->master); rspi_release_dma(rspi); - free_irq(platform_get_irq(pdev, 0), rspi); - clk_put(rspi->clk); - iounmap(rspi->addr); + clk_disable(rspi->clk); return 0; } @@ -903,7 +935,7 @@ static int rspi_probe(struct platform_device *pdev) struct rspi_data *rspi; int ret, irq; char clk_name[16]; - struct rspi_plat_data *rspi_pd = pdev->dev.platform_data; + const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev); const struct spi_ops *ops; const struct platform_device_id *id_entry = pdev->id_entry; @@ -913,12 +945,6 @@ static int rspi_probe(struct platform_device *pdev) dev_err(&pdev->dev, "there is no set_config_register\n"); return -ENODEV; } - /* get base addr */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(res == NULL)) { - dev_err(&pdev->dev, "invalid resource\n"); - return -EINVAL; - } irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -936,19 +962,20 @@ static int rspi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rspi); rspi->ops = ops; rspi->master = master; - rspi->addr = ioremap(res->start, resource_size(res)); - if (rspi->addr == NULL) { - dev_err(&pdev->dev, "ioremap error.\n"); - ret = -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + rspi->addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(rspi->addr)) { + ret = PTR_ERR(rspi->addr); goto error1; } snprintf(clk_name, sizeof(clk_name), "%s%d", id_entry->name, pdev->id); - rspi->clk = clk_get(&pdev->dev, clk_name); + rspi->clk = devm_clk_get(&pdev->dev, clk_name); if (IS_ERR(rspi->clk)) { dev_err(&pdev->dev, "cannot get clock\n"); ret = PTR_ERR(rspi->clk); - goto error2; + goto error1; } clk_enable(rspi->clk); @@ -965,37 +992,36 @@ static int rspi_probe(struct platform_device *pdev) master->setup = rspi_setup; master->transfer = rspi_transfer; master->cleanup = rspi_cleanup; + master->mode_bits = SPI_CPHA | SPI_CPOL; - ret = request_irq(irq, rspi_irq, 0, dev_name(&pdev->dev), rspi); + ret = devm_request_irq(&pdev->dev, irq, rspi_irq, 0, + dev_name(&pdev->dev), rspi); if (ret < 0) { dev_err(&pdev->dev, "request_irq error\n"); - goto error3; + goto error2; } rspi->irq = irq; ret = rspi_request_dma(rspi, pdev); if (ret < 0) { dev_err(&pdev->dev, "rspi_request_dma failed.\n"); - goto error4; + goto error3; } - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret < 0) { dev_err(&pdev->dev, "spi_register_master error.\n"); - goto error4; + goto error3; } dev_info(&pdev->dev, "probed\n"); return 0; -error4: - rspi_release_dma(rspi); - free_irq(irq, rspi); error3: - clk_put(rspi->clk); + rspi_release_dma(rspi); error2: - iounmap(rspi->addr); + clk_disable(rspi->clk); error1: spi_master_put(master); diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c index 9eda21d739c6..1edffed9e098 100644 --- a/drivers/spi/spi-sc18is602.c +++ b/drivers/spi/spi-sc18is602.c @@ -254,9 +254,6 @@ error: static int sc18is602_setup(struct spi_device *spi) { - if (!spi->bits_per_word) - spi->bits_per_word = 8; - if (spi->mode & ~(SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST)) return -EINVAL; @@ -319,7 +316,7 @@ static int sc18is602_probe(struct i2c_client *client, master->transfer_one_message = sc18is602_transfer_one; master->dev.of_node = np; - error = spi_register_master(master); + error = devm_spi_register_master(dev, master); if (error) goto error_reg; @@ -330,16 +327,6 @@ error_reg: return error; } -static int sc18is602_remove(struct i2c_client *client) -{ - struct sc18is602 *hw = i2c_get_clientdata(client); - struct spi_master *master = hw->master; - - spi_unregister_master(master); - - return 0; -} - static const struct i2c_device_id sc18is602_id[] = { { "sc18is602", sc18is602 }, { "sc18is602b", sc18is602b }, @@ -353,7 +340,6 @@ static struct i2c_driver sc18is602_driver = { .name = "sc18is602", }, .probe = sc18is602_probe, - .remove = sc18is602_remove, .id_table = sc18is602_id, }; diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 292567ab4c6c..40179d201966 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -353,4 +353,4 @@ module_platform_driver(hspi_driver); MODULE_DESCRIPTION("SuperH HSPI bus driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); -MODULE_ALIAS("platform:sh_spi"); +MODULE_ALIAS("platform:sh-hspi"); diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index c74298cf70e2..ac8795f2e700 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -152,7 +152,7 @@ static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p, size_t k; if (!WARN_ON(!spi_hz || !parent_rate)) - div = parent_rate / spi_hz; + div = DIV_ROUND_UP(parent_rate, spi_hz); /* TODO: make more fine grained */ diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c index c120a70094f2..86a17d60a68c 100644 --- a/drivers/spi/spi-sh.c +++ b/drivers/spi/spi-sh.c @@ -358,9 +358,6 @@ static int spi_sh_setup(struct spi_device *spi) { struct spi_sh_data *ss = spi_master_get_devdata(spi->master); - if (!spi->bits_per_word) - spi->bits_per_word = 8; - pr_debug("%s: enter\n", __func__); spi_sh_write(ss, 0xfe, SPI_SH_CR1); /* SPI sycle stop */ diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index ed5e501c4652..e430689c3837 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -536,16 +536,9 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) static int spi_sirfsoc_setup(struct spi_device *spi) { - struct sirfsoc_spi *sspi; - if (!spi->max_speed_hz) return -EINVAL; - sspi = spi_master_get_devdata(spi->master); - - if (!spi->bits_per_word) - spi->bits_per_word = 8; - return spi_sirfsoc_setup_transfer(spi, NULL); } diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 4396bd448540..286cf8d6764b 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -417,10 +417,8 @@ out: static int ti_qspi_runtime_resume(struct device *dev) { struct ti_qspi *qspi; - struct spi_master *master; - master = dev_get_drvdata(dev); - qspi = spi_master_get_devdata(master); + qspi = dev_get_drvdata(dev); ti_qspi_restore_ctx(qspi); return 0; @@ -516,13 +514,9 @@ free_master: static int ti_qspi_remove(struct platform_device *pdev) { - struct spi_master *master; - struct ti_qspi *qspi; + struct ti_qspi *qspi = platform_get_drvdata(pdev); int ret; - master = platform_get_drvdata(pdev); - qspi = spi_master_get_devdata(master); - ret = pm_runtime_get_sync(qspi->dev); if (ret < 0) { dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); @@ -534,8 +528,6 @@ static int ti_qspi_remove(struct platform_device *pdev) pm_runtime_put(qspi->dev); pm_runtime_disable(&pdev->dev); - spi_unregister_master(master); - return 0; } diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 446131308acb..9322de9e13fb 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -466,12 +466,6 @@ static void pch_spi_reset(struct spi_master *master) static int pch_spi_setup(struct spi_device *pspi) { - /* check bits per word */ - if (pspi->bits_per_word == 0) { - pspi->bits_per_word = 8; - dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__); - } - /* Check baud rate setting */ /* if baud rate of chip is greater than max we can support,return error */ diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 349ebba4b199..63613a96233c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -370,6 +370,17 @@ static void spi_dev_set_name(struct spi_device *spi) spi->chip_select); } +static int spi_dev_check(struct device *dev, void *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct spi_device *new_spi = data; + + if (spi->master == new_spi->master && + spi->chip_select == new_spi->chip_select) + return -EBUSY; + return 0; +} + /** * spi_add_device - Add spi_device allocated with spi_alloc_device * @spi: spi_device to register @@ -384,7 +395,6 @@ int spi_add_device(struct spi_device *spi) static DEFINE_MUTEX(spi_add_lock); struct spi_master *master = spi->master; struct device *dev = master->dev.parent; - struct device *d; int status; /* Chipselects are numbered 0..max; validate. */ @@ -404,12 +414,10 @@ int spi_add_device(struct spi_device *spi) */ mutex_lock(&spi_add_lock); - d = bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev)); - if (d != NULL) { + status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check); + if (status) { dev_err(dev, "chipselect %d already in use\n", spi->chip_select); - put_device(d); - status = -EBUSY; goto done; } @@ -591,8 +599,10 @@ static int spi_transfer_one_message(struct spi_master *master, goto out; } - if (ret > 0) + if (ret > 0) { + ret = 0; wait_for_completion(&master->xfer_completion); + } trace_spi_transfer_stop(msg, xfer); @@ -632,7 +642,7 @@ out: * * Called by SPI drivers using the core transfer_one_message() * implementation to notify it that the current interrupt driven - * transfer has finised and the next one may be scheduled. + * transfer has finished and the next one may be scheduled. */ void spi_finalize_current_transfer(struct spi_master *master) { @@ -685,7 +695,7 @@ static void spi_pump_messages(struct kthread_work *work) } /* Extract head of queue */ master->cur_msg = - list_entry(master->queue.next, struct spi_message, queue); + list_first_entry(&master->queue, struct spi_message, queue); list_del_init(&master->cur_msg->queue); if (master->busy) @@ -735,7 +745,9 @@ static void spi_pump_messages(struct kthread_work *work) ret = master->transfer_one_message(master, master->cur_msg); if (ret) { dev_err(&master->dev, - "failed to transfer one message from queue\n"); + "failed to transfer one message from queue: %d\n", ret); + master->cur_msg->status = ret; + spi_finalize_current_message(master); return; } } @@ -791,11 +803,8 @@ struct spi_message *spi_get_next_queued_message(struct spi_master *master) /* get a pointer to the next message, if any */ spin_lock_irqsave(&master->queue_lock, flags); - if (list_empty(&master->queue)) - next = NULL; - else - next = list_entry(master->queue.next, - struct spi_message, queue); + next = list_first_entry_or_null(&master->queue, struct spi_message, + queue); spin_unlock_irqrestore(&master->queue_lock, flags); return next; @@ -1596,15 +1605,11 @@ int spi_setup(struct spi_device *spi) } EXPORT_SYMBOL_GPL(spi_setup); -static int __spi_async(struct spi_device *spi, struct spi_message *message) +static int __spi_validate(struct spi_device *spi, struct spi_message *message) { struct spi_master *master = spi->master; struct spi_transfer *xfer; - message->spi = spi; - - trace_spi_message_submit(message); - if (list_empty(&message->transfers)) return -EINVAL; if (!message->complete) @@ -1667,9 +1672,8 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message) if (xfer->rx_buf && !xfer->rx_nbits) xfer->rx_nbits = SPI_NBITS_SINGLE; /* check transfer tx/rx_nbits: - * 1. keep the value is not out of single, dual and quad - * 2. keep tx/rx_nbits is contained by mode in spi_device - * 3. if SPI_3WIRE, tx/rx_nbits should be in single + * 1. check the value matches one of single, dual and quad + * 2. check tx/rx_nbits match the mode in spi_device */ if (xfer->tx_buf) { if (xfer->tx_nbits != SPI_NBITS_SINGLE && @@ -1682,9 +1686,6 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message) if ((xfer->tx_nbits == SPI_NBITS_QUAD) && !(spi->mode & SPI_TX_QUAD)) return -EINVAL; - if ((spi->mode & SPI_3WIRE) && - (xfer->tx_nbits != SPI_NBITS_SINGLE)) - return -EINVAL; } /* check transfer rx_nbits */ if (xfer->rx_buf) { @@ -1698,13 +1699,22 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message) if ((xfer->rx_nbits == SPI_NBITS_QUAD) && !(spi->mode & SPI_RX_QUAD)) return -EINVAL; - if ((spi->mode & SPI_3WIRE) && - (xfer->rx_nbits != SPI_NBITS_SINGLE)) - return -EINVAL; } } message->status = -EINPROGRESS; + + return 0; +} + +static int __spi_async(struct spi_device *spi, struct spi_message *message) +{ + struct spi_master *master = spi->master; + + message->spi = spi; + + trace_spi_message_submit(message); + return master->transfer(spi, message); } @@ -1743,6 +1753,10 @@ int spi_async(struct spi_device *spi, struct spi_message *message) int ret; unsigned long flags; + ret = __spi_validate(spi, message); + if (ret != 0) + return ret; + spin_lock_irqsave(&master->bus_lock_spinlock, flags); if (master->bus_lock_flag) @@ -1791,6 +1805,10 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message) int ret; unsigned long flags; + ret = __spi_validate(spi, message); + if (ret != 0) + return ret; + spin_lock_irqsave(&master->bus_lock_spinlock, flags); ret = __spi_async(spi, message); |